UAQ2D330MHH6 [NICHICON]

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 33uF, THROUGH HOLE MOUNT, RADIAL LEADED;
UAQ2D330MHH6
型号: UAQ2D330MHH6
厂家: NICHICON CORPORATION    NICHICON CORPORATION
描述:

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 33uF, THROUGH HOLE MOUNT, RADIAL LEADED

电容器
文件: 总1页 (文件大小:38K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
ALUMINUM ELECTROLYTIC CAPACITORS  
Wide Temperature Range, Miniature Type Permissible  
Abnormal Voltage  
AQ (Radial Lead Type) series  
Improved safety feature for abnormally excessive voltage.  
High ripple current product.  
Specifications  
Item  
Performance Characteristics  
Category Temperature Range  
Rated Voltage Range  
Rated Capacitance Range  
Capacitance Tolerance  
Leakage Current  
40 ~ +105°C  
200 · 400V  
10 ~ 220µF  
± 20% at 120Hz, 20°C  
After 1 minute's application of rated voltage, leakage current is 0.04CV+100 ( A) or less.  
µ
200  
0.15  
400  
0.15  
Measurement frequency:120Hz, Temperature:20°C  
Rated voltage (V)  
tan  
δ
tan δ (MAX.)  
Rated voltage (V)  
Measurement frequency : 120Hz  
200  
3
6
400  
8
10  
Stability at Low Temperature  
Z25°C / Z+20°C  
40°C / Z+20°C  
Impedance ratio ZT / Z20 (MAX.)  
Z
After an application of D.C. bias voltage plus the rated ripple  
current for 2000 hours at 105°C the peak voltage shall not  
exceed the rated D.C. voltage, capacitors meet the  
characteristic requirements listed at right.  
After leaving capacitors under no load at 105°C for 1000 hours, they meet the specified value for endurance characteristics listed above.  
The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case.  
Capacitance change  
tan δ  
%
Within ±20 of initial value  
Endurance  
Shelf Life  
200% or less of initial specified value  
Initial specified value or less  
Leakage current  
Test conditions  
voltage (V)  
Limited DC current  
Test Voltage  
Safety Performance  
4A  
2A  
300VDC and 375VDC  
500VDC and 600VDC  
200  
400  
Marking  
Printed with white color letter on dark brown sleeve.  
Radial Lead Type  
Type numbering system (Example : 200V 100 F)  
µ
(
)
Sleeve P.E.T.  
φd  
1
2
3
4
5
6
7
8
9 10 11 12  
U A Q 2 D 1 0 1 M H D  
Size code  
Configuration  
Capacitance tolerance (±20%)  
Rated Capacitance (100µF)  
Rated voltage (200V)  
Series name  
(mm)  
Pressure  
relief vent  
φD 10 12.5 16 18 22  
+
MAX  
MIN  
MIN  
4
0.5 0.5 0.5 0.5 1.0  
5.0 5.0 7.5 7.5 10  
L
15  
P
Type  
φd 0.6  
0.8 0.8 1.0  
0.6  
Configuration  
(φD 18) 2.0  
(φD >18) 3.0  
Pb-free leadwire  
Pb-free PET sleeve  
Sn-Pb finished leadwire  
PVC sleeve (containing Pb)  
φ D  
In case L>25 for φ12.5 (D) case sizes,  
lead diameter φ0.8 (d) will be applied.  
10  
12.5 ~ 18  
22  
PD  
HD  
RD  
PH  
HH  
RH  
Please contact to us if other configurations are required.  
Dimensions  
φD×L (mm)  
V(Code)  
200 (2D)  
400 (2G)  
φD  
Cap.(µF)  
10  
12.5  
16  
18  
22  
12.5  
12.5 × 20.0  
100  
16  
18  
22  
Code  
010  
100  
10 × 20  
120  
10 × 25  
160  
0.10 × 31.5  
195  
12.5 × 31.5  
145  
12.5 × 40.0  
195  
16 × 20  
145  
16 × 25  
195  
0.16 × 35.5  
280  
0.16 × 35.5  
320  
022  
033  
047  
056  
068  
082  
100  
150  
180  
220  
220  
330  
470  
560  
680  
820  
101  
151  
181  
221  
18 × 20  
195  
12.5 × 20.0  
160  
12.5 × 20.0  
195  
12.5 × 25.0  
210  
12.5 × 25.0  
250  
12.5 × 31.5  
285  
12.5 × 35.5  
335  
18 × 25  
280  
18 × 31.5  
320  
22 × 20  
280  
16 × 40  
350  
18 × 35.5  
350  
22 × 25  
320  
16 × 20  
285  
16 × 25  
335  
0.16 × 31.5  
435  
0.16 × 35.5  
495  
18 × 40  
420  
18 × 20  
335  
18 × 25  
435  
18 × 31.5  
495  
0.18 × 35.5  
575  
22 × 20  
435  
22 × 25  
495  
Case size  
Rated ripple  
Rated Ripple (mA rms) at 105°C 120Hz  
: In case of low profile type, will be put at 12th digit of type numbering system.  
For further low profile product, will be put at 12th digit.  
6
Frequency coefficient of rated ripple current  
:
3
50, 60Hz 120Hz  
0.80 1.00  
300Hz  
1.25  
1kHz  
1.40  
10kHz ~  
1.60  
Frequency  
Please refer to page 19, 20, 21 about the formed or taped product spec.  
Please refer to page 3 for the minimum order quantity.  
CAT.8100T  
Coefficient  

相关型号:

UAQ2D330MHH6TO

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 33uF, THROUGH HOLE MOUNT, RADIAL LEADED, CAN
NICHICON

UAQ2D330MPD

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 33uF, Through Hole Mount, RADIAL LEADED; ROHS COMPLIANT
NICHICON

UAQ2D330MPH

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 33uF, THROUGH HOLE MOUNT, RADIAL LEADED
NICHICON

UAQ2D330MPH1TD

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 33uF, THROUGH HOLE MOUNT, RADIAL LEADED, CAN
NICHICON

UAQ2D470MHD

ALUMINUM ELECTROLYTIC CAPACITORS
NICHICON

UAQ2D470MHH6

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 47uF, THROUGH HOLE MOUNT, RADIAL LEADED
NICHICON

UAQ2D470MHH6TO

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 47uF, THROUGH HOLE MOUNT, RADIAL LEADED, CAN
NICHICON

UAQ2D470MPD

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 47uF, Through Hole Mount, RADIAL LEADED; ROHS COMPLIANT
NICHICON

UAQ2D470MPD1TD

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 47uF, Through Hole Mount, RADIAL LEADED, CAN
NICHICON

UAQ2D470MPH

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 47uF, THROUGH HOLE MOUNT, RADIAL LEADED
NICHICON

UAQ2D470MPH1TD

CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 47uF, THROUGH HOLE MOUNT, RADIAL LEADED, CAN
NICHICON

UAQ2D560MHD

ALUMINUM ELECTROLYTIC CAPACITORS
NICHICON