RS2-508S-D15 概述
ROTARY SELECTOR SWITCHES
RS2-508S-D15 数据手册
通过下载RS2-508S-D15数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载RS/RG
ROTARY SELECTOR SWITCHES
INTERNAL STRUCTURE
RoHS compliant
⑫
⑭
①
②
③
⑬
⑪
④
⑩
⑨
⑬
⑤
⑥
⑧
⑦
Flammability
Part name
Rotor
Material
■
FEATURES
POM(Polyoxymethylene
)
UL94HB
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
ꢀ RoHS compliant
Stopper pin
ꢀ P.C.B. mounted, compact size and DIP compatible
ꢀ Protection by“O”ring (contact block) against dust and
for cleaning after soldering
ꢀ Precious metal alloy wiping type contacts provide a long
life (50000 revolutions at no load) and high reliability. (In
house comparison)
Copper alloy
Stopper pin holder
Shaft
Copper alloy, Nickel-plated
Nickel-plated
—
Stopper ring
Linking pin
Click gear
Click plate
Click spring
Contact spring
Terminal pin
“O” ring
ꢀ Both shorting and non-shorting types are available
Copper alloy, Nickel-plated
PA
Polyoxymethylene
SWPA Piano wire
Multi metal alloy
(Polyamide)
UL94HB
—
POM(
)
(
)
Copper alloy, Gold-plated
Silicone rubber
Cover
UL94HB
PBT(Polybutyleneterephthalate
)
Housing
The DIP-TYPE ROTARY SELECTOR SWITCHES RS/RG series listed here are standard
versions, but our production will be made upon receipt of your orders.
RS/RG
ROTARY SELECTOR SWITCHES
■
PART NUMBER DESIGNATION
R S 1 - 1 12 S - R 15
Series name
Shaft length
RS:Selector
15:15 mm
RG:Selector (with a ground terminal)
Shape of shaft
R:Round type φ3.2 mm
D:D-cut φ4.0 mm
No. of blocks
1 ~ 3:1 ~ 3 blocks
Contact timing
S:Shorting
N:Non-shorting
No. of poles
1 ~ 6:1 ~ 6 poles
No. of contacts
02 ~ 12:2 ~ 12 contacts
※ Shaft length of 10 mm or 20 mm is also available.
■
LIST OF PART NUMBERS
No. of contacts
07
No. of blocks
No. of poles
02
03
04
05
06
08
09
10
11
12
1
2
RS1-102
RS1-202
RS1-103
RS1-203
RS1-104
RS1-204
RS1-105
RS1-205
RS1-106
RS1-206
RS1-107
RS1-108
RS1-109
RS1-110
RS1-111
RS1-112
1
2
RS2-207
RS3-307
RS2-208
RS3-308
RS2-209
RS3-309
RS2-210
RS3-310
RS2-211
RS3-311
RS2-212
RS3-312
RS2-302
RS2-303
RS2-304
RS2-305
RS2-306
3
3
2
4
5
6
RS2-402
RS3-502
RS3-602
RS2-403
RS3-503
RS3-603
RS2-404
RS3-504
RS3-604
RS2-405
RS3-505
RS3-605
RS2-406
RS3-506
RS3-606
3
: Not manufactured
※Verify the above part numbers when placing orders.
※The above part numbers are all available respectively with the
combination of Ground terminal (with or without). Contact timing
(Shorting or Non-shorting), and Shaft shape (Round or D-cut).
The DIP-TYPE ROTARY SELECTOR SWITCHES RS/RG series listed here are standard
versions, but our production will be made upon receipt of your orders.
RS/RG
ROTARY SELECTOR SWITCHES
■
STANDARD SPECIFICATIONS
■
ELECTRICAL CHARACTERISTICS
1 pole 2 ~ 12 contacts (per block)
Circuit type
2 poles 2 ~ 6 contacts (per block)
Contact rating
Maximum current
Minimum current
Maximum voltage
Minimum voltage
1 VA
1 A
1 μA
30 V
20 mV
Operating temperature range
−40 ~ 85 °C
Storage temperature range
Sealing
Washable (only contact block, “O” ring sealed)
Contact timing
Shorting, Non-shorting
100 mΩ maximum
※Please refer to page 150, 151
Contact resistance
Insulation resistance
Dielectric strength
Electrostatic capacity
Approx. 7 g (1 block)
Approx. 13.6 g (2 blocks)
Approx. 19.4 g (3 blocks)
Net weight
1000 MΩ (DC500 V) minimum
AC500 V, 60 s
4 pF maximum, 10 kHz
■
MECHANICAL CHARACTERISTICS
■
ENVIRONMENTAL CHARACTERISTICS
Adjustment torque
60 30 mN·m {612 306 gf·cm}
500 mN·m {5.1 kgf·cm} minimum
30°
Amplitude 3 mm or
Vibration
Acceleration 196 m/s2,
10-2000-10 Hz, 3 directions for 4 h each
Stopper strength
Stepping angle
Terminal strength
Solderability
980 m/s2, 6 ms
6 directions for 3 times each
Shock
500,000 steps or 50,000 cycles at 6 contacts with no load
200,000 steps or 20,000 cycles at 6 contacts with rated load
10 N {1.02 kgf} minimum
245 3 °C, 2 ~ 3 s
Load life
Humidity (Steady state)
High temperature exposure
Low temperature exposure
40 °C, Relative humidity 90 ~ 95 %, 240 h
85 °C, 16 h
Flow : 260 3 °C as the temperature
in a pot of molten solder, immersion
from head of terminal to backside of
board, 5 ~ 6 s, two times maximum
−40 °C, 16 h
Soldering heat
Manual soldering
:
380 10 °C, 3 ~ 4 s
{ } : Reference only
The DIP-TYPE ROTARY SELECTOR SWITCHES RS/RG series listed here are standard
versions, but our production will be made upon receipt of your orders.
RS/RG
ROTARY SELECTOR SWITCHES
■
OUTLINE DIMENSIONS
Unless otherwise specified, tolerance: 0.3 (Unit: mm)
ꢀꢁRS series
ꢀꢁRG series
Part No.
& Production date code
Part No.
& Production date code
0.8W × 1D
0.8 W × 1 D
1
block
17.8
2 blocks
17.8
3 blocks
17.8
1
block
2 blocks
17.8
3 blocks
17.8
150.5
150.5
1.2
17.8
17.8
17.8
1
φ
φ
0.30.1
0.30.1
0.4
Ground terminal (Note 1)
0.60.1
0.60.1
7.62
7.62
5.3
5.1
2.54 × 6
2.54 × 6
(Note1)
A ground terminal is connected electrically to a shaft.
(A)ꢀDiameter of shaft
0
φ
0
D-cut
type
3.2
– 0.1
4
Round
type
–0.3
Slot
Width:0.8 mm
Depth:1 mm
3
<Shaft slot direction>
There is a difference in the direction of the slot on the shaft
between shorting and non-shorting type. The location of
the shaft of each type when their shafts are fully turned to
CCW is shown in the chart below.
Shorting type
Non-shorting type
The DIP-TYPE ROTARY SELECTOR SWITCHES RS/RG series listed here are standard
versions, but our production will be made upon receipt of your orders.
RS/RG
ROTARY SELECTOR SWITCHES
(Unit: mm)
■
TERMINAL CONNECTION / P.C.B. THROUGH HOLE DIMENSIONS
RS
RG
2 poles 6 contacts
1 pole 12 contacts
4 poles 6 contacts
2 poles 12 contacts
Terminal pin layout
(Bottom view)
External connection
External connection
RS 1
RG 1
φ
14 – 0.9
7.620.1
5.30.1
7.620.1
φ
16 – 0.9
RS case
RS 2
RG case
P.C.B. dimensions
(Bottom view)
RG 2
7.620.1
7.620.1
5.30.1
10.160.1
10.160.1
7.620.1
7.620.1
φ
28 – 0.9
RS case
RG case
φ
30 – 0.9
■
PACKAGING SPECIFICATIONS
ꢀꢁBoxing of one block type is performed 20 pcs. (More
than two blocks type are 10 pcs.) per box.Order will be
accept for the quantities by packaging unit(s).
(Ex. 1 block: 20 pcs, 40pcs… / 2 blocks̃: 10 pcs, 20 pcs…)
Note: The conventional knob (Round shaft, φ3.2 mm) available in the market
such as the one in the picture can be used.
The DIP-TYPE ROTARY SELECTOR SWITCHES RS/RG series listed here are standard
versions, but our production will be made upon receipt of your orders.
RS2-508S-D15 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
RS2-508S-R15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-509N-D15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-509N-R15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-509S-D15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-509S-R15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-510N-D15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-510N-R15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-510S-D15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-510S-R15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 | |
RS2-511N-D15 | NIDEC | ROTARY SELECTOR SWITCHES | 获取价格 |
RS2-508S-D15 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6