SLA215K [NIDEC]
High Current Power Rocker Switches;型号: | SLA215K |
厂家: | NIDEC COMPONENTS |
描述: | High Current Power Rocker Switches |
文件: | 总2页 (文件大小:194K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SLA215K
RoHS Compliant
High Current Power Rocker Switches
UL
CSA ENEC
■ ꢀꢁꢂꢃꢄ ꢆꢃꢇꢈꢄꢉꢊꢋꢆ
■Features
1. High capacity of 15 A is realized with a compact body.
2. The reinforced insulation structure realized by
adoption of a resin frame ensures use without anxiety.
3. Easy snap-in panel mounting
Resistive load 15A 125V AC 15A 250V AC
Rating Inductive load
Min.rating
Initial contact resistance 20mΩ max. (1A 2~4V DC)
Dielectric strength 1,500V AC 1 minute
Insulation resistance 100MΩ min.(500V DC)
Electrical life(cycles) 10,000 cycles
36A/15Ap.f.=0.6/0.9 250V AC
100mA 5V AC/DC
4. The switch is structured so that the use of the soldering
terminals and the TAB receptacle (#187) can be chosen.
5. Best suited for use with the power supply of high-
capacity equipment.
The RoHS compliance design realized cadmium-
and lead-free products.
Operating force
2.94~12.74N
-25~+85℃
-40~+85℃
Operating
temperature range
6. UL , CSA and ENEC approved products.
Storange
*No ENEC-approved product is available for the tab terminal type.
temperature range
■Part Numbering
SLA 2 15 K - 5
ꢀ ꢀ
Series code
Switching function
Rocker design
Poles
Current
None
OFF - ON
15A
K
15
5
6
7
■Table of Part Numbers
■Approvals
UL File No.E43275
TYPE
★SLA215K
SLA215K-5
★SLA215K-6
☆SLA215K-7
CSA File No.LR38341
ENEC Rof. No. SE/05105-03
MARKING
COLOR
(WHITE)
UNFIGURED
SLA215K
■Appearance style
CIRCUIT CHARACTERISTICS
CIRCUIT ARRANGEMENT DIAGRAM TERMINALS
WITH ROCKER TO WITH ROCKER TO
SIDE OF A
SIDE OF B
OFF
ON
4
(1)-(2)
(3)-(4)
Terminal numbers are shown on the bottom of the switch.
■Panel Cut-Out Dimensions
■Terminal Style
PANEL THICKNESS : 1.0~3.5
Solder Termina(l It can be used for TAB #187)
■ꢀꢉꢌꢍꢂꢎꢄꢊꢏꢆꢀꢁꢂꢃꢄꢅꢃꢇꢈꢄꢉꢊꢋꢆ
■ꢐꢇꢃꢑꢇꢏꢄꢊꢏꢆꢀꢁꢂꢃꢄꢅꢃꢇꢈꢄꢉꢊꢆ
ꢀ
Manual Soldering
50 pcs/pack
Device
:Soldering iron
380℃, Max.; 3 seconds, Max.
■
Precautions for Panel Mounting
Applicable Series Products:
SLE6/10, SLE210K, SL10K, SLE10K and SLA215K
The edges on the back of the cut-out panel should be squared so that
ꢀꢁꢂꢃꢄꢅꢆꢀꢇꢁꢃꢈꢉꢊꢃꢈꢆꢀꢂꢄꢃꢀꢁꢂꢃꢋꢌꢍꢂꢎꢃꢏꢐꢑꢎꢒꢓꢃꢔꢁꢂꢍꢃꢀꢁꢂꢃꢋꢌꢍꢂꢎꢃꢆꢄꢃꢇꢉꢌꢀꢂꢕꢖꢃꢋꢌꢒꢃ
attention that the coating will not retain around the edge. Do not reuse
the switch that was once mounted on a panel.
Edge
ꢀ
相关型号:
©2020 ICPDF网 联系我们和版权申明