PT76S8 [NIEC]
75A Avg 800 Volts; 75A平均800伏
| 型号： | PT76S8 |
| 厂家： | 
NIHON INTER ELECTRONICS CORPORATION |
| 描述： | 75A Avg 800 Volts |
| 文件： | 总2页 (文件大小：232K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Analog 5-wire PET-On-Glass Touch Screen Specification
1. Mechanical Dimensions and Construction
1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass.
1.2 Construction :
Item Description
ITO PET
Material
Remarks
0.188mm ITO PET Film Antiglare coating
Surface hardness: 3H
1
(Top layer)
Resistance:300~600Ω/□
ITO Patterned Glass (Bottom 2.36 mm ITO Glass
layer)
Resistance:300~900Ω/□
Separated Tail
2,54mm
2
3
4
5
6
7
8
9
Tail Base
Kapton
Tail cover lay
Connector
Top layer circuit
Bottom layer circuit
Layer to layer contacted
Dot spacer
Kapton
AMP compatible
Silver ink
Silver ink
Silver ink
UV Cure ink
Isolation Adhesive
UV Glue
10 Isolation Layer
11 Glue
Touch screen side view:
Changes that contribute to technical improvement are subject to alternations
2006
Datum Name
Bearb. 18.08. Maurer
TOUCHSCREEN
10,67", 5-Wire
AMT-02507-01
Gepr.
Vert.
18.08
Maurer
SPECIFICATIONS OF ANALOG RESISTIVE
EDV-Datasheet
PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
don’t change manually
Zu Änd.
Datum
Name
D 79346 Endingen
page 1 of 4
Index: -
1.3 Input Method and Activation Force
Input Method
16mm dia. Silicon "finger"
Average Activation Force
Less than 1.00 N
2. Typical Optical Characteristics
2.1
2.2
Visible Light Transmission:
Haze:
>80%
< 13%
3. Electrical Specifications
3.1
3.2
3.3
3.4
3.5
3.6
Operating Voltage:
Contact current:
Circuit close resistance:
Circuit open resistance:
Contact bounce:
5.5V or less
20mA (maximum)
20~300Ω
> 10MΩ at 25VDC
< 15ms
Linearity Specifications:
The linearity specifications are based on Hampshire or
PenMount touch screen controllers and drivers to define.
10 mm inside of X and Y active area dimensions.
The area 10 mm inside of X and Y active area dimensions.
3.6.1 Inner Active Area :
Perimeter of Active Area :
Changes that contribute to technical improvement are subject to alternations
2006
Datum Name
Bearb. 18.08. Maurer
TOUCHSCREEN
10,67", 5-Wire
AMT-02507-01
Gepr.
Vert.
18.08
Maurer
SPECIFICATIONS OF ANALOG RESISTIVE
EDV-Datasheet
PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
don’t change manually
Zu Änd.
Datum
Name
D 79346 Endingen
page 2 of 4
Index: -
3.6.2 Calculate Linearity
2
2
∆X +∆Y
%Linearity =
*100
Active Area Diagonal
£ YG
£ XG
3.6.3 Linearity:
Inner Active Area : <1.0%
Perimeter of Active Area : <2.0%
4. Environment Specification
4.1
4.2
Operating Temperature
Storage Temperature
- 10° C ~ + 50° C Humidity less than 90% RH, no dew condensation
- 20° C ~ + 80° C at Ambient Humidity
5. Reliability Test
5.1
Exposure to high temperature
Touch panel is put into a test machine at the condition of 80°C for 120 hours. Then it is left at the room
Temperature for 24 hours or more. The measurement must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
5.2
Exposure to low temperature
Touch panel is put into a test machine at the condition of –20°C for 120 hours. Then it is left at the room tempera-
ture for 24 hours or more. The measurement must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
Changes that contribute to technical improvement are subject to alternations
2006
Datum Name
Bearb. 18.08. Maurer
TOUCHSCREEN
10,67", 5-Wire
AMT-02507-01
Gepr.
Vert.
18.08
Maurer
SPECIFICATIONS OF ANALOG RESISTIVE
EDV-Datasheet
PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
don’t change manually
Zu Änd.
Datum
Name
D 79346 Endingen
page 3 of 4
Index: -
5.3
Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 50°C, 90%RH for 120 hours. Then it is left at the room
temperature for 24 hours or more. The measurement must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
5.4
Thermal Shock
Touch panel is put into a test machine at the condition of –40°C for 30 minutes, and then 80°C for 30 minutes.
The process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measure-
ment must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
6. Durability test:
6.1 Finger touches
Touch panel is hit 36 millions times with a silicone rubber of R8 finger, hitting rate is by 250g at 2 times per
second. The measurement must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
7. Optical Performance:
7.1
7.2
Optical inspection method and optical defect standards refer to document. A001-2 Touch Screen Optical Quality
Standard.
Outside to Active Area : any optical defected in this area need to be ignored if no effected to touch screen func-
tion.
8. Others
8.1
Always store the touch screen in its original shipping container under normal conditions (20~25°C, 65% RH)
Changes that contribute to technical improvement are subject to alternations
2006
Datum Name
Bearb. 18.08. Maurer
TOUCHSCREEN
10,67", 5-Wire
AMT-02507-01
Gepr.
Vert.
18.08
Maurer
SPECIFICATIONS OF ANALOG RESISTIVE
EDV-Datasheet
PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
don’t change manually
Zu Änd.
Datum
Name
D 79346 Endingen
page 4 of 4
Index: -
相关型号：
©2020 ICPDF网 联系我们和版权申明