776896-01 [NI]
Portable E Series Multifunction DAQ 12 or 16-Bit, up to 1.25 MS/s, 16 Analog Inputs; 便携E系列多功能DAQ 12位或16位，高达1.25 MS / s的16个模拟输入
| 型号： | 776896-01 |
| 厂家： | 
National Instruments |
| 描述： | Portable E Series Multifunction DAQ 12 or 16-Bit, up to 1.25 MS/s, 16 Analog Inputs |
| 文件： | 总4页 (文件大小：445K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Portable E Series Multifunction DAQ
12 or 16-Bit, up to 1.25 MS/s, 16 Analog Inputs
E Series – Portable
• 16 analog inputs at up to 1.25 MS/s,
Operating Systems
12 or 16-bit resolution
• Windows 2000/NT/XP
• Up to 2 analog outputs at up to
1 MS/s, 12 or 16-bit resolution
• 8 digital I/O lines (TTL/CMOS); two
24-bit counter/timers
• Analog and digital triggering
• 4 analog input signal ranges
• NI-DAQ Measurement
Recommended Software
• LabVIEW
• LabWindows/CVI
• Measurement Studio
• VI Logger
Other Compatible Software
• Visual Basic, C/C++, and C#
Services simplifies configuration
and measurements
Measurement Services
Software (included)
• NI-DAQ 7
Analog
Inputs
Input
Max
Input
Range
Analog
Outputs
Output
Resolution
Output
Rate
1 kS/s
8ꢁ0 kS/s
1 kS/s
333 kS/s
1 MS/s
100 kS/s
Output Digital Counter/
Measurment
Services Software1
NI-DAQmx
NI-DAQmx
NI-DAQmx
Traditiꢂnal NI-DAQ
Traditiꢂnal NI-DAQ
Traditiꢂnal NI-DAQ
Products
Bus
Resolution Sampling Rate
Range
10 ꢃ
10 ꢃ
10 ꢃ
10 ꢃ
10 ꢃ
10 ꢃ
I/O
Timers
Triggers
DAQCard-6036E
DAQCard-6062E
DAQCard-6024E
DAQPad-60ꢁ2E
DAQPad-6070E
DAQPad-6020E
PCMCIA
PCMCIA
PCMCIA
IEEE 1394
IEEE 1394
USB
16 SE/8 DI
16 SE/8 DI
16 SE/8 DI
16 SE/8 DI
16 SE/8 DI
16 SE/8 DI
16 bits
12 bits
12 bits
16 bits
12 bits
12 bits
200 kS/s
ꢁ00 kS/s
200 kS/s
333 kS/s
1ꢀ2ꢁ MS/s
100 kS/s
0ꢀ0ꢁ tꢂ 10 ꢃ
0ꢀ0ꢁ tꢂ 10 ꢃ
0ꢀ0ꢁ tꢂ 10 ꢃ
0ꢀ0ꢁ tꢂ 10 ꢃ
0ꢀ0ꢁ tꢂ 10 ꢃ
0ꢀ0ꢁ tꢂ 10 ꢃ
2
2
2
2
2
2
16 bits
12 bits
12 bits
16 bits
12 bits
12 bits
8
8
8
8
8
8
2
2
2
2
2
2
Digital
Analꢂg, digital
Digital
Analꢂg, digital
Analꢂg, digital
Digital
1Fꢂr up-tꢂ-date infꢂrmatiꢂn ꢂn NI-DAQ, visit niꢀcꢂm/suppꢂrt/daq/versiꢂnsꢀhtm
Table 1. NI Portable E Series Model Guide
Overview and Applications
Highly Accurate Hardware Design
National Instruments portable E Series DAQ products deliver the NI portable E Series DAQ devices provide the functionality of
same functionality available in PCI and PXI E Series DAQ devices – E Series data acquisition devices in a portable format:
in a portable format. The DAQPad devices are hot swappable and
available in up to three different configurations. The 15 cm enclosure Temperature Drift Protection Circuitry – Designed with components
is ideal for desktop or portable applications and features a 68-pin that minimize the effect of temperature changes on measurements to
shielded connector. The 30 cm enclosure with mass termination less than 0.0010% of reading per °C.
offers a low-profile package that fits under your laptop computer.
It features a 68-pin shielded connector to connect signals from our Resolution Improvement Technologies – Carefully designed noise
SCC modular signal conditioning products or from our CA-1000 floor maximizes the resolution.
custom connectivity enclosure. The 30 cm enclosure with BNC
connectivity is ideal for applications where portability and quick Onboard Self-Calibration – Precise voltage reference included for
connectivity are needed, such as in-vehicle automotive or aircraft calibration and measurement accuracy. Self-calibration is completely
testing and portable data logging.
software controlled, with no potentiometers to adjust.
NI DAQCards are Type II, PC Card compliant and provide
performance equivalent to their PCI or PXI counterparts. However, due NI DAQ-STC – Timing and control ASIC designed to provide more
to their compact design, they can be used in applications where space flexibility, lower power consumption, and a higher immunity to noise
constraints are an important concern, such as field service and research. and jitter than off-the-shelf counter/timer chips.
NI MITE – ASIC designed to optimize data transfer for multiple
simultaneous operations using bus mastering with DMA channels,
interrupts, or programmed I/O.
Portable E Series Multifunction DAQ
12 or 16-Bit, up to 1.25 MS/s, 16 Analog Inputs
Models
NI 6052E
NI 6070E
DAQCard-6062E
DAQPad-6020E
DAQCard-6036E,
DAQCard-6024E
Measurement Sensitivity* (mV)
Nominal Range (V)
0ꢀ002ꢁ
0ꢀ009
0ꢀ010
0ꢀ006
0ꢀ004
0ꢀ009
Positive FS
Negative FS
Absolute Accuracy (mV)
10
ꢁ
2ꢀꢁ
1
0ꢀꢁ
0ꢀ2ꢁ
0ꢀ1
0ꢀ0ꢁ
10
ꢁ
2
1
0ꢀꢁ
0ꢀ2
0ꢀ1
-10
-ꢁ
-2ꢀꢁ
-1
-0ꢀꢁ
-0ꢀ2ꢁ
-0ꢀ1
-0ꢀ0ꢁ
0
0
0
0
0
4ꢀ747
0ꢀ876
1ꢀ190
0ꢀ479
0ꢀ243
0ꢀ137
0ꢀ064
0ꢀ03ꢁ
1ꢀ232
2ꢀ119
0ꢀ8ꢁ0
0ꢀ428
0ꢀ242
0ꢀ111
0ꢀ0ꢁ9
14ꢀ369
ꢁꢀ193
3ꢀ60ꢁ
1ꢀ4ꢁ2
0ꢀ73ꢁ
0ꢀ379
0ꢀ163
0ꢀ091
6ꢀ76ꢁ
ꢁꢀ391
2ꢀ167
1ꢀ092
0ꢀꢁꢁ8
0ꢀ23ꢁ
0ꢀ127
17ꢀ94ꢁ
6ꢀ983
4ꢀꢁ02
1ꢀ813
0ꢀ917
0ꢀ474
0ꢀ203
0ꢀ113
8ꢀꢁꢁ
6ꢀ288
2ꢀꢁ28
1ꢀ274
0ꢀ6ꢁ3
0ꢀ274
0ꢀ149
14ꢀ826
4ꢀ671
3ꢀ719
1ꢀ498
0ꢀ7ꢁ7
0ꢀ387
0ꢀ16ꢁ
0ꢀ091
ꢁꢀ721
ꢁꢀ619
2ꢀ2ꢁ8
1ꢀ137
0ꢀꢁ77
0ꢀ241
0ꢀ129
8ꢀ6ꢁ3
2ꢀ3ꢁ7
–
–
0ꢀ4ꢁ4
–
–
0ꢀ067
–
–
–
–
–
–
–
19ꢀ012
6ꢀꢁ17
–
–
0ꢀ0972
–
–
0ꢀ119
–
–
–
–
–
–
–
0
0
Nꢂte: Accuracies are valid fꢂr measurements fꢂllꢂwing an internal Calibratiꢂnꢀ Measurement accuracies are listed fꢂr ꢂperatiꢂnal temperatures within 1 °C ꢂf internal calibratiꢂn temperature and 10 °C ꢂf external ꢂr
factꢂry-calibratiꢂn temperatureꢀ One-year calibratiꢂn interval recꢂmmendedꢀ The Absꢂlute Accuracy at Full Scale calculatiꢂns were perfꢂrmed fꢂr a maximum range input vꢂltage (fꢂr example, 10 ꢃ fꢂr the 10 ꢃ rangeꢄ after ꢂne
year, assuming 100 pt averaging ꢂf dataꢀ*Smallest detectable vꢂltage change in the input signal at the smallest input rangeꢀ
Table 2. NI Portable E Series Analog Input Absolute Accuracy Specifications
Models
NI 6052E
NI 6070E
DAQCard-6062E
DAQPad-6020E
DAQCard-6036E,
DAQCard-6024E
Nominal Range (V)
Positive FS
Negative FS
Absolute Accuracy (mV)
10
10
-10
0
1ꢀ40ꢁ
1ꢀ176
8ꢀ127
ꢁꢀ68ꢁ
10ꢀꢁ68
–
8ꢀ133
ꢁꢀ691
2ꢀꢁ47
–
10ꢀꢁ68
–
Table 3. NI Portable E Series Analog Output Absolute Accuracy Specifications
NI PGIA – Measurement and instrument class amplifier that Automatic Code Generation – The DAQ Assistant is an interactive
guarantees settling times at all gains. Typical commercial off-the- guide that steps you through configuring, testing, and programming
shelf amplifier components do not meet the settling time measurement tasks and generates the necessary code automatically
requirements for high-gain measurement applications.
for LabVIEW, LabWindows/CVI, or Measurement Studio.
PFI Lines – Eight programmable function input (PFI) lines that can Cleaner Code Development – Basic and advanced software functions
be used for software-controlled routing of intraboard digital and have been combined into one easy-to-use yet powerful set to help
timing signals.
you build cleaner code and move from basic to advanced
applications without replacing functions.
RSE Mode – In addition to differential and nonreferenced single-
ended modes, NI portable E Series devices offer referenced High-Performance Driver Engine – Software-timed single point
single-ended (RSE) mode for use with floating signal sources in input (typically used in control loops) with NI-DAQ achieves rates of
applications with channel counts higher than eight.
up to 50 kHz. NI-DAQ also delivers maximum system throughput
I/O with a multithreaded driver.
Onboard Temperature Sensor – Included for monitoring the
operating temperature of the device to ensure that it is operating Test Panels – With NI-DAQ, you can test all of your device
within the specified range. functionality before you begin development.
Analog and Digital Triggering – Some portable E Series devices Scaled Channels – Easily scale your voltage data into the proper
provide the ability to set a trigger based on the level of an analog signal, engineering units using the NI-DAQ measurement-ready virtual
in addition to the ability to trigger off an edge of a digital signal.
channels by choosing from a list of common sensors and signals or
creating your own custom scale.
High-Performance, Easy-to-Use Driver Software
Measurement Services Software includes NI-DAQ, the robust driver LabVIEW Integration – All NI-DAQ functions use the waveform data
software that makes it easy to access the functionality of your data type, which carries acquired data and timing information directly
acquisition hardware, whether you are a beginning or advanced user. into more than 400 LabVIEW built-in analysis routines for display of
Helpful features include:
results in engineering units on a graph.
2
National Instruments • Tel: (800) 433-3488 • info@ni.com • ni.com
Portable E Series Multifunction DAQ
12 or 16-Bit, up to 1.25 MS/s, 16 Analog Inputs
Worldwide Support and Services
Recommended Accessories
NI provides you with a wealth of resources to help you get your Signal conditioning is required for sensor measurements or voltage
application up and running more quickly, including:
inputs greater than 10 V. National Instruments SCXI is a versatile,
high-performance signal conditioning platform, intended for high-
Technical Support – Purchase of NI hardware or software gives you channel-count applications. NI SCC products provide portable,
access to application engineers all over the world as well as Web flexible signal conditioning options on a per-channel basis. Both
resources with more than 3,000 measurement examples and more signal conditioning platforms are designed to increase the
than 9,000 KnowledgeBase entries. – ni.com/support
performance and reliability of your DAQ System, and are up to 10X
more accurate than terminal blocks (please visit ni.com/sigcon for
Calibration – Includes NIST-traceable basic calibration certificates, more details). Refer to the table below for more information:
services for ANSI/NCSL-Z540 and periodic calibration
–
Sensor/Signals (>10 V)
System Description
High perfꢂrmance
ni.com/calibration
DAQ Device
Signal Conditioning
DAQCard-60xxE, DAQPad-60xxE
DAQCard-60xxE, DAQPad-60xxE
SCXI
SCC
Lꢂw-Cꢂst, pꢂrtable
Extended Warranty – Meet project life-cycle requirements and
maintain optimal performance in a cost-effective way – ni.com/services
Signals (<10 V)1
System Description
DAQ Device
Terminal Block
Cable
Shielded
Shielded
Lꢂw-Cꢂst
Lꢂw-Cꢂst
DAQPad-60xxE
DAQCard-60xxE
DAQPad-60xxE
DAQCard-60xxE
SCB-68
SCB-68
CB-68LP
CB-68LP
SH6868-EP
SHC6868-EP
R6868
For more information on NI services and support,
please visit ni.com/services
RC6868
1Terminal Blꢂcks dꢂ nꢂt prꢂvide signal cꢂnditiꢂning (ieꢀ filtering, amplificatiꢂn, isꢂlatiꢂn, etcꢀꢄ, which may be
necessary tꢂ increase the accuracy ꢂf yꢂur measurementsꢀ
Visit ni.com/oem for information on our quantity discounts.
Table 4. Recommended Accessories
For information on device support in NI-DAQ 7,
visit ni.com/dataacquisition
Ordering Information
NI DAQCard-6036E ....................................................................778561-01
NI DAQCard-6062E ....................................................................777976-01
NI DAQCard-6024E ....................................................................778269-01
NI DAQPad-6052E1 for FireWire (IEEE 1394) with
30 cm enclosure with mass termination,
AC Adapter2, and 1 m USB cable
US 120 VAC....................................................................777704-01
Universal Euro 240 VAC................................................777704-04
United Kingdom 240 VAC ............................................777704-06
Japan 120 VAC................................................................777704-07
30 cm enclosure with BNC termination AC Adapter2,
and 1 m USB cable
US 120 VAC....................................................................777703-01
Universal Euro 240 VAC................................................777703-04
United Kingdom 240 VAC ............................................777703-06
Japan 120 VAC................................................................777703-07
Includes NI-DAQ software
Mass termination, AC Adapter2, and 4 m FireWire cable
US 120 VAC ........................................................................778535-01
Universal Euro 240 VAC ....................................................778535-04
United Kingdom 240 VAC.................................................778535-06
BNC termination, AC Adapter2, and 4 m FireWire cable
US 120 VAC ........................................................................778536-01
Universal Euro 240 VAC ....................................................778536-04
United Kingdom 240 VAC.................................................778536-06
NI DAQPad-6070E for FireWire1 (IEEE 1394) with
1Windows 2000/XP only for DAQPads
2The AC Adapter is universal. The difference between these kits is the power cable.
Mass termination, AC Adapter2, and 4 m FireWire cable
US 120 VAC ........................................................................777867-01
Universal Euro 240 VAC ....................................................777867-04
United Kingdom 240 VAC.................................................777867-06
BNC termination, AC Adapter2, and 4 m FireWire cable
DAQPad Accessories
BP-1 rechargeable battery pack
120 VAC charger........................................................776896-01
230 VAC charger........................................................776896-31
Rack-mount kit ............................................................777665-01
Stacking kit ....................................................................777666-01
PCI-to-IEEE 1394 adapter ............................................Please call
CardBus-to-IEEE 1394 adapter ....................................Please call
US 120 VAC ........................................................................777803-01
Universal Euro 240 VAC ....................................................777803-04
United Kingdom 240 VAC.................................................777803-06
NI DAQPad-6020E for USB1 in
15 cm enclosure with AC Adapter2, and 1 m USB cable
US 120 VAC ........................................................................777474-01
Universal Euro 240 VAC ....................................................777474-04
United Kingdom 240 VAC.................................................777474-06
Japan 120 VAC....................................................................777474-07
BUY ONLINE!
Visit ni.com/dataacquisition
National Instruments • Tel: (800) 433-3488 • info@ni.com • ni.com 3
NI Services and Support
NI has the services and support to meet your
needs around the globe and through the
application life cycle – from planning
and development through deployment
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you
access to engineers who speak your language. NI delivers industry-
leading technical support through online knowledge bases, our
applications engineers, and access to 14,000 measurement and
automation professionals within NI Developer Exchange forums.
Find immediate answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of
technical support. Visit ni.com/ssp.
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
SERVICE
NEEDS
Training and Certification
NI training is the fastest, most certain route to productivity with our Hardware Services
products. NI training can shorten your learning curve, save NI Factory Installation Services
development time, and reduce maintenance costs over the NI Factory Installation Services (FIS) is the fastest and easiest way to
application life cycle. We schedule instructor-led courses in cities use your PXI or PXI/SCXI combination systems right out of the box.
worldwide, or we can hold a course at your facility. We also offer a Trained NI technicians install the software and hardware and
professional certification program that identifies individuals who configure the system to your specifications. NI extends the standard
have high levels of skill and knowledge on using NI products. warranty by one year on hardware components (controllers, chassis,
Visit ni.com/training.
modules) purchased with FIS. To use FIS, simply configure your
system online with ni.com/pxiadvisor.
Professional Services
Our Professional Services Team is comprised of NI applications Calibration Services
engineers, NI Consulting Services, and a worldwide NI Alliance NI recognizes the need to maintain properly calibrated devices for
Partner Program of more than 600 independent consultants and high-accuracy measurements. We provide manual calibration
integrators. Services range procedures, services to recalibrate your products, and automated
from start-up assistance to calibration software specifically designed for use by metrology
turnkey system integration. laboratories. Visit ni.com/calibration.
Visit ni.com/alliance.
Repair and Extended Warranty
OEM Support
NI provides complete repair services for our products. Express repair
We offer design-in consulting and product integration assistance and advance replacement services are also available. We offer
if you want to use our products for OEM applications. For extended warranties to help you meet project life-cycle requirements.
information about special pricing and services for OEM customers, Visit ni.com/services.
visit ni.com/oem.
ni.com • (800) 433-3488
National Instruments • Tel: (512) 683-0100 • info@ni.com
© 2005 National Instruments Corporation. All rights reserved. CVI, LabVIEW, Measurement Studio, National Instruments Alliance Partner, ni.com, NI-DAQ
and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.
相关型号：
©2020 ICPDF网 联系我们和版权申明