NI673X [NI]
High-Speed Voltage Output - up to 1 MS/s/Channel,up to 16 Bits, up to 32 Channels; 高速电压输出 - 高达1 MS /秒/通道，最多16位，多达32个通道
| 型号： | NI673X |
| 厂家： | 
National Instruments |
| 描述： | High-Speed Voltage Output - up to 1 MS/s/Channel,up to 16 Bits, up to 32 Channels |
| 文件： | 总8页 (文件大小：337K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High-Speed Voltage Output – up to 1 MS/s/Channel,
up to 16 Bits, up to 32 Channels
NI 673x, NI 671x, NI 672x
• Low-cost arbitrary waveform generation
• High-channel density
Recommended Software
• LabVIEW 7.x or higher
• Integrated multidevice synchronization bus
• Easy real-time control with
LabVIEW Real-Time
• LabWindows™/CVI 7.x or higher
• Measurement Studio 7.x or higher
• Analog Waveform Editor
• Digital triggering and external clocking
• Simultaneous updates
• 8 digital I/O lines (TTL/CMOS)
• Two 24-bit counter/timers
Other Compatible Software
• Visual Studio .NET
• Visual Basic, C/C++, and C#
Measurement Services
Software (included)1
• NI-DAQmx driver
• Measurement & Automation
Explorer configuration utility
• Measurement services that simplify
configuration and measurements
Operating Systems
• Windows 2000/NT/XP
• Mac OS X
1Mac OS X and Linux applications must use
• Linux®
NI-DAQmx Base driver software.
Calibration Certificate Available
Family
Bus
Analog Outputs Update Rate per Channel (S/s)1 Output Resolution Output Range (V) External Voltage Reference Digital I/O Counter/Timers Triggering
NI 6711 PCI, PXI
NI 6713 PCI, PXI
NI 6715 PCMCIA
4
8
1 M
12
12
12
16
16
13
13
10
10
10
10
10
10
10
8
8
2, 24-bit
2, 24-bit
2, 24-bit
2, 24-bit
2, 24-bit
2, 24-bit
2, 24-bit
Digital
Digital
Digital
Digital
Digital
Digital
Digital
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
–
740 k to 1 M
100 k to 1 M
1 M
8
8
NI 6731
PCI
4
82
82
8
NI 6733 PCI, PXI
NI 6722 PCI, PXI
NI 6723 PCI, PXI
8
740 k to 1 M
182 to 800 k
45 to 800 k
8
32
–
8
1Update rate can vary depending on the number of channels used; 2Static or hardware-timed pattern generation and acquisition up to 10 MHz
Table 1. High-Speed Voltage Output Product Selection Guide
devices, you have complete control of each data point that is updated on
the output for each channel. This feature is significant because you can
define not only common waveforms such as square, sine, or sawtooth but
also complex waveforms. For instance, you are able to create a sine wave
that is overlaid with noise in which the amplitude and noise shape are
user-defined. In practice, the waveform is defined in a software buffer,
within PC memory, and is streamed to the voltage output device using
direct memory access (DMA) data transfers. Using DMA transfers, the
amount of memory located on board the voltage output device is
minimized and is swapped with inexpensive PC memory.
Overview and Applications
National Instruments high-speed voltage output devices combine the
latest in PC technologies to deliver simultaneous, multichannel updates
for control and waveform output applications. Use these modules in a
variety of applications, including:
• Stimulus/response
• Power supply control
• High-speed, deterministic control
• Sensor/signal simulation
Features
Real-Time Control
The versatile NI high-speed voltage output devices commonly replace
You can use NI high-speed voltage output devices with the LabVIEW
several kinds of instruments including stand-alone PID controllers, low-speed Real-Time Module to deliver real-time, deterministic control loop execution.
arbitrary waveform generators, and function generators.
Because they are compatible with LabVIEW Real-Time, common control
algorithms, such as PID, are simple to implement but, more importantly,
you may prototype and implement complex, cutting-edge control algorithms
as well. High-performance control, on the order of eight PID loops running
in excess of 20 kHz each, is possible with this combination of hardware
Waveform Generation
These devices are capable of updating at rates up to 1 MS/s, giving you
the ability to generate waveforms up to 500 kHz. When using these
High-Speed Voltage Output – up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels
and software. Each high-speed voltage output device offers multichannel into more than 400 LabVIEW built-in analysis routines for display of
simultaneous updates and hardware-timed single-point updates.
results in engineering units on a graph.
Multidevice Synchronization
NI-DAQmx Base Driver
Each high-speed voltage output device offers the ability to be master or
slave of a multidevice timing and triggering system. Use integration
technologies such as the RTSI bus, PXI trigger bus, and PFI pins to trigger
and synchronize to a wide variety of I/O types. These I/O types range
from analog input, image acquisition, motion control, and high-speed
digitizers to multifunction data acquisition devices. With these
integration infrastructures, you can create powerful, custom test and
control systems with ease.
NI-DAQmx Base (available at ni.com/downloads) offers Mac OS X and
Linux users a programming interface similar to NI-DAQmx. It features
ready-to-use LabVIEW VIs and C function features similar to those
included in NI-DAQmx driver software.
34 68
33 67
32 66
31 65
30 64
29 63
28 62
27 61
26 60
25 59
24 58
23 57
22 56
21 55
20 54
19 53
18 52
17 51
16 50
15 49
14 48
13 47
12 46
11 45
10 44
AO_GND
NC
NC
AO_GND
AO_GND
AO_71
AO_GND
AO_GND
AO_61
AO_GND
AO_51
Measurement Services Software
AO_GND
AO_GND
NC
National Instruments measurement services software, built around
NI-DAQmx driver software, features intuitive application programming
interfaces, configuration tools, I/O assistants, and other tools designed
to reduce system setup, configuration, and development time. This software,
part of your data acquisition purchase, includes helpful features such as:
AO_GND
AO_GND
AO_3
AO_GND
AO_4
AO_GND
AOGND
AO_2
AO_GND
AO_GND
AO_GND
AO_GND
AO_GND
D_GND
DIO0
AO_0
AO_1
EXTREF
PO4
D_GND
PO1
Automatic Code Generation – DAQ Assistant is an interactive guide
that helps you navigate through configuring, testing, and programming
analog output tasks and automatically generates the necessary code
for NI LabVIEW, LabWindows/CVI, or Measurement Studio.
PO5
PO6
D_GND
+5 V
D_GND
DIO2
PO7
D_GND
D_GND
PFI_0
PFI_1
DBND
+5 V
PO3
NC
EXTSTROBE
D_GND
Cleaner Code Development – Basic and advanced software functions
have been combined into one easy-to-use yet powerful set to help you
build cleaner code and move from basic to advanced applications
without replacing functions.
9
8
7
6
5
4
3
2
1
43
42
41
40
39
38
37
36
35
PFI_2
PFI_3/ CTR_1_SOURCE
PFI_4/ CTR_1_GATE
CTR_1_OUT
D_GND
D_GND
PFI_5/AO_SAMP_CLK
PFI_6/AO_START_TRIG
D_GND
PFI_7
PFI_9/CTR_0_GATE
CTR_0_OUTT
PFI_8/CTR_0_SOURCE
D_GND
FREQ_OUT
D_GND
High-Performance Driver Engine – NI-DAQmx delivers maximum
1 No Connect on 6711 or 6731
I/O system throughput with a multithreaded driver.
Figure 1. NI 671x and NI 673x I/O Connector
Test Panels – With the Measurement & Automation Explorer
configuration utility, you can test all of your module functionality
before you begin development.
Scaled Channels – Easily scale your voltage data into the proper
engineering units using the NI-DAQmx measurement-ready virtual
channels by choosing from a list of common sensors and signals or
creating your own custom scale.
LabVIEW Integration – All NI-DAQmx functions create the waveform
data type, which carries acquired data and timing information directly
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
2
High-Speed Voltage Output – up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels
CH0
Amp
CH0
12-Bit DAC
CH1
Amp
CH1
12-Bit DAC
CH2
Amp
CH2
12-Bit DAC
CH3
Amp
CH3
12-Bit DAC
CIS
EEPROM
CONFIG
EEPROM
CH4
Amp
CH4
12-Bit DAC
DAC
Control
Bus
Interface
Control/Data
Address/Control
Data
AO
Control
Bus
Interface
FPGA
CH5
Amp
CH5
12-Bit DAC
FIFO
DAQ-STC
Calibration
Control
EEPROM
Data In Interface
CH6
Amp
CH6
12-Bit DAC
Digital
Thermometer
DAC
FIFO
CH7
Amp
CH7
12-Bit DAC
Calibration
DACs
24
Calibration
Mux
Calibration
ADC
8
Analog Output Bus
Timing/Control Interface
Analog Input
Timing/Control
PFI / Trigger
Timing
Trigger
IRQ
DAQ-STC
Counter/
RTSI Bus
Interface
Digital I/O
Timing I/O
Digital I/O (8)
+5 V
0.75 A
Figure 2. NI DAQCard-6715 Hardware Block Diagram
Control
CH0
Latch
CH0
Amp
Generic Mini
Bus
Interface
PCI
Bus
Interface
CH0
CH1
MITE
Data
Address/Data
IRQ
DAC
FIFO
CH1
Amp
CH1
Latch
EEPROM
EEPROM
Control
Register
Decode
CH3/7
Latch
CH3/7
Amp
CH3/7
AO
Control
DMA/
IRQ
FPGA
DMA
DAQ-STC
Calibration
Control
Bus
AO Control
Interface
Calibration
DACs
24
Calibration
Mux
Calibration
ADC
8
Bus
Analog Output
Timing/Control
PFI / Trigger
Trigger
Interface
DMA/IRQ
RTSI Bus
Counter/
Timing I/O
Timing
DAQ - STC
Analog Input
Digital I/O (8)
Digital I/O
Timing/Control Interface
+5 V
1A
RTSI Bus
Note: CH4 through CH7 are found on 6713 and 6733 only
Figure 3. NI 671x and NI 673x Hardware Block Diagram
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
3
High-Speed Voltage Output – up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels
Load DAC
13-Bit DAC
13-Bit DAC
13-Bit DAC
13-Bit DAC
13-Bit DAC
EEPROM
13-Bit DAC
PCI
MITE
Control
13-Bit DAC
13-Bit DAC
Power On
Reset
PCI
Bus
Interface
Misc
Analog
Output
Generic
Bus
Interface
Address/Data
MITE
Interface
FPGA
FIFO
Analog
Input
x41
x41
Clear
Update,
Busy
16-Bit ADC
Analog Output
Timing/Control
DMA/IRQ
Trigger
Timing I/O
Digital I/O
PFI/Trigger
DMA/IRQ
Bus
Interface
DAQ - STC
Timing
RTSI Bus
Interface
Digital I/O (8)
1NI PCI-6723 only
RTSI Bus
Figure 4. NI 672x Hardware Block Diagram
PCMCIA
Ordering Information
NI DAQCard-6715..................................................................778146-01
PCI
Includes data acquisition driver software.
1Windows only.
NI PCI-6711............................................................................777740-01
NI PCI-6713............................................................................777741-01
NI PCI-67221 ..........................................................................778705-01
NI PCI-67231 ..........................................................................778701-01
NI PCI-6731............................................................................778511-01
NI PCI-6733............................................................................778510-01
For more information on extended warranty and value-added
services, visit ni.com/services.
PXI
NI PXI-6711............................................................................777794-01
NI PXI-6713............................................................................777795-01
NI PXI-67221 ..........................................................................778999-01
NI PXI-67231 ..........................................................................778998-01
NI PXI-6733............................................................................778512-01
BUY NOW!
For complete product specifications, pricing, and accessory information,
call (800) 813 3693 (U.S.) or go to ni.com/dataacquisition.
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
4
High-Speed Voltage Output – up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels
Digital logic levels
Base clocks available.......................... 20 MHz and 100 kHz
Data transfers ..................................... DMA (except DAQCard-6715),
interrupts, programmed I/O
DMA modes ........................................ Scatter-gather
Specifications – NI 671x, NI 673x
These specifications are typical at 25 °C unless otherwise stated.
Analog Output
Output Characteristics
Number of channels
NI 6715/6713/6733 ........................ 8 voltage outputs
NI 6711/6731.................................. 4 voltage outputs
Resolution ........................................... 12 bits, 1 in 4,096 (NI 671x),
16 bits, 1 in 65,536 (NI 673x)
Digital Trigger
Purpose
Analog output................................. Start trigger, gate, clock
General-purpose counter/timers.... Source, gate
Source ................................................. (except NI 6715)
PCI................................................... RTSI <0...6>
PXI................................................... PFI <0...9>
Slope ................................................... Positive or negative;
software-selectable
Maximum Update Rate (NI 671x/673x)
Max Update Rate (NI 6715)
Number of
Channels
Using Local
Using Host
Using Local
Using Host
FIFO (kS/s)1
Memory (kS/s)2
FIFO (kS/s)1
1,000
850
Memory (kS/s)2
1,000
1,000
1,000
1,000
1,000
952
1,000
1,000
1,000
1,000
1,000
1,000
869
800
400
266
200
160
133
114
100
1
2
3
4
5
6
7
8
Compatibility....................................... 5 V TTL/CMOS
750
650
600
550
510
480
Specifications – NI 672x
These specifications are typical at 25 °C unless otherwise stated.
833
740
769
Analog Output
1These numbers apply to continuous waveform generation, and do not change irrespective of the number of devices in
the system. 2These numbers may change when using more devices or when other CPU or bus activity is taking place.
Output Characteristics
Number of channels
NI 6722 ........................................... 8 voltage outputs
FIFO buffer size
NI 6713/6733.................................. 16,384 samples
NI 6711/6715/6731 ........................ 8,192 samples
Data transfers ..................................... DMA, interrupts,
programmed I/O
Max Update Rate (kS/s)
Number of Channels
1
2
8
16
24
32
Using Local FIFO1
Using Host PC Memory2
800
714
476
333
253
204
800
714
182
90.9
60
DMA modes (PXI/PCI only) ................. Scatter-gather
Voltage Output
Ranges................................................. 10.0 V, AO EXT REF
Output coupling................................... DC
45
1These numbers apply to continuous waveform generation, which allows for the time it takes to reset the FIFO to the
beginning when cycling through it. This additional time is not incurred when using host PC memory for waveform
generation. The max update rate in FIFO mode does not change regardless of the number of devices in the system.
Protection............................................ Short-circuit to ground
Digital I/O
2These results were measured using an NI 6722/6723 device with a 550 MHz Pentium III machine. These
numbers may change when using more devices or when other CPU or bus activity occurs.
Number of channels............................ 8 input/output
Compatibility....................................... 5 V TTL/CMOS
Power-on state.................................... Input (high-impedance)
Data transfers ...................................... Programmed I/O, DMA (NI 673x),
interrupts (NI 673x)
Input buffer ......................................... 2048 B (NI 673x)
Output buffer....................................... 2048 B (NI 673x)
Transfer rate........................................ 10 Mwords/s (NI 673x)
NI 6723 ........................................... 32 voltage outputs
Resolution ........................................... 13 bits, 1 in 8,192
Max update rate
FIFO buffer size ................................... 2,048 samples
Data transfers ........................................ DMA, interrupts, programmed I/O
DMA modes ........................................ Scatter gather
Voltage Output
Ranges................................................. 10 V
Output coupling................................... DC
Timing I/O
General-Purpose Up/Down Counter/Timers
Protection............................................ Short-circuit to ground
Number of channels............................
2
Resolution ........................................... 24 bits
Compatibility....................................... 5 V TTL/CMOS
Digital I/O
Number of channels............................ 8 input/output
Compatibility....................................... TTL/CMOS
Power-on state.................................... Input (high-impedance)
Data transfers ..................................... Programmed I/O
Level
Minimum
0 V
Maximum
0.8 V
5 V
0.4 V
–
Input low voltage
2 V
Input high voltage
–
Output low voltage (Iout = 5 mA)
Output high voltage (Iout = -3.5 mA)
4.35 V
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
5
High-Speed Voltage Output – up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels
Timing I/O
Number of channels
I/O Connector Blocks
BNC-2110 – Shielded I/O connector block with signal-labeled BNC
connectors for easy connectivity of your analog output (AO), digital I/O
(DIO), and counter/timer signals.
Up/down counter/timers................
Frequency scaler.............................
Resolution
Up/down counter/timers................ 24 bits
Frequency scaler............................. 4 bits
Compatibility....................................... 5 V TTL/CMOS
Digital logic levels
2
1
BNC-2110..............................................................................777643-01
Dimensions – 20.3 by 11.2 by 5.5 cm (8.0 by 4.4 by 2.2 in.)
BNC-2115 – Shielded I/O connector block with signal-labeled BNC
connectors for easy connectivity of your extended analog output on
NI 6723 devices.
Level
Input low voltage
Input high voltage
Output low voltage (Iout = 5 mA)
Output high voltage (Iout = -3.5 mA)
Min
0.0 V
2.0 V
–
Max
0.8 V
5.0 V
0.4 V
–
BNC-2115..............................................................................777807-01
Dimensions – 20.3 by 11.2 by 5.5 cm (8.0 by 4.4 by 2.2 in.)
4.35 V
Data transfers
Up/down counter/timers................ DMA (scatter-gather), interrupts,
programmed I/O
Frequency scaler............................. Programmed I/O
SCB-68 – Shielded I/O connector blocks giving you rugged, very low-noise
signal termination. The SCB-68 also houses silk-screened component
locations for easy addition of simple signal conditioning circuitry for
your AO channels.
Digital Trigger
Purpose
Analog output................................. Start trigger, gate, clock
Counter/timers................................ Source, gate
Source ................................................. PFI <0...9>
Compatibility....................................... 5 V TTL
Response............................................. Rising or falling edge
SCB-68 ..................................................................................776844-01
Dimensions – 19.5 by 15.2 by 4.5 cm (7.7 by 6.0 by 1.8 in.)
CA-1000 – Configurable enclosure that gives you user-defined
connectivity and flexibility through customized panelettes.
CA-1000 ..............................................................................777664-01
Dimensions – 30.7 by 25.4 by 4.3 cm (12.1 by 10 by 1.7 in.)
For more detailed specifications, please refer to the product manual.
High-Speed Voltage Output
Cables and Accessories
TBX-68 – 68 screw terminals for easy connection of field signals to
68-pin DAQ devices. It includes one 68-pin male connector for direct
connection to 68-pin cables. The TBX-68 is mounted in a protective
plastic base with hardware for mounting on a standard DIN rail.
TBX-68 ..................................................................................777141-01
Dimensions – 12.50 by 10.74 cm (4.92 by 4.23 in.)
Recommended Configurations
• Shielded options for minimal noise interference
• Direct connectivity options such as BNC
• Low-cost options for OEM
• Front-mount terminal block for PXI
• Custom connectivity with the CA-1000
CB-68LP, CB-68LPR – 68 screw terminals for easy connection of field
signals to AO devices. They include one 68-pin male connector for direct
connection to 68-pin cables. The connector blocks include standoffs for
use on a desktop or for mounting in a custom panel. The CB-68LP has a
vertical mounted 68-pin connector. The CB-68LPR has a right-angle
mounted connector and can also be used with the CA-1000.
CB-68LP ................................................................................777145-01
Dimensions – 14.35 by 10.74 cm (5.65 by 4.23 in.)
Model
Shielding Connect to …
Shielded BNC
Shielded Screw terminals
Shielded Screw terminals
Cable
SH68-68-EP
SH68-68-EP
–
Accessory
BNC-2110
SCB-68 or TBX-68
TB-2705 (PXI)
CA-1000
NI 673x,
NI 671x
Shielded
Unshielded Screw terminals
Shielded BNC
Shielded Screw terminals 2 SH68-C68-S
Custom
SH68-68-EP
R6868
2 SH68-C68-S BNC-2110 and BNC-2115
CB-68LP or CB-68LPR
NI 6723
NI 6722
2 SCB-68 or TBX-68
2 CA-1000
Shielded
Shielded
Shielded Screw terminals
Shielded Custom
Unshielded Screw terminals
Shielded BNC
Custom
BNC
2 SH68-C68-S
SH68-C68-S
SH68-C68-S
SH68-C68-S
RC68-68
BNC-2110
SCB-68
CA-1000
CB-68LP or CB-68LPR
BNC-2110
SCB-68
CA-1000
CB-68LP or CB-68LPR
Dimensions – 7.62 by 16.19 cm (3.00 by 6.36 in.)
TB-2705 – 68-pin screw-terminal block for PXI-671x and PXI-673x
modules. Latches to the front of your PXI module with locking screws
and provides strain relief as well as easy access to your analog, digital,
SHC68-68-EPM
DAQCard-6715
Shielded Screw terminals SHC68-68-EPM
Shielded
Unshielded Screw terminals
Custom
SHC68-68-EPM
RC68-68
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
6
High-Speed Voltage Output – up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels
trigger, and counter/timer signals through screw terminals. Does not
work with NI 6703 or NI 6704 devices.
stability. Use this cable for a DAQCard located in the bottom PCMCIA
slot of a laptop.
TB-2705 ................................................................................778241-01
Dimensions – 8.43 by 10.41 by 2.03 cm (3.32 by 4.1 by 0.8 in.)
0.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186838-0R5
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186838-01
SHC68U-68-EP – Identical to the SHC68-68-EP, except that the
DAQCard connector is inverted so you can use two latching DAQCard
devices in adjacent slots. Use this cable with a DAQCard inserted in the
upper PCMCIA slot of a laptop.
Synchronization Cables
RTSI Bus Cables – Used to connect timing and synchronization signals
among measurement, vision, motion, and CAN boards for PCI. For
systems with long and short boards, use the extended RTSI cable.
2 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .776249-02
3 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..776249-03
4 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .776249-04
5 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .776249-05
Extended, 5 boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .777562-05
0.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187406-0R5
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187406-01
SH68-C68-S – Shielded cable for connecting and latching NI 672x
devices to standard 68-pin accessories.
2 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186381-02
Shielded I/O Cables
Ribbon I/O Cables
SH68-68-EP – Shielded 68-conductor cable terminated with two 68-pin
female 0.050 series D-type connectors, featuring individually shielded
analog twisted pairs for reduced crosstalk with high-speed devices. This
cable works with all NI 671x and NI 673x devices.
R6868 – 68-conductor flat ribbon cable terminated with two 68-pin
connectors. Use this cable to connect the NI 670x, NI 671x, and NI 673x
devices to low-cost 68-pin accessories.
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182482-01
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184749-01
RC68-68 – 68-conductor flat ribbon cable terminated with one
VHDCI 68-pin connector and one 68-pin SCSI II connector. Use this
cable to connect the NI 6722 devices and DAQCard-6715 with standard
68-pin accessories.
SHC68-68-EP – Shielded cable for connecting and latching the NI
DAQCard-6715, NI 6722, and NI 6723 to standard 68-pin accessories.
Latching screws secure the shielded connector to the device itself for
1 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187252-01
BNC-2110
SCB-68
CA-1000
CB-68LP I/O and CB-68LPR
TB-2705
RTSI Bus Cable
SH68-68-EP
SHC68-68-EP
R6868 Ribbon Cable
RC68-68 Ribbon Cable
Shielded Cable
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
7
NI Services and Support
NI has the services and support to meet
Local Sales and Technical Support
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
that identifies individuals who have high levels of skill and knowledge on Trained NI technicians install the software and hardware and configure
using NI products. Visit ni.com/training.
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online
Professional Services
Our Professional Services Team is composed of NI applications engineers, with ni.com/pxiadvisor.
NI Consulting Services, and a worldwide National Instruments Alliance
Calibration Services
NI recognizes the need to maintain properly calibrated devices for
Partner program of more than 600 independent consultants and
integrators. Services range from
start-up assistance to turnkey
system integration.
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
ni.com • (800) 813 3693
*351432A-01*
351432A-01
2006-7838-301-101-D
National Instruments • info@ni.com
© 2006 National Instruments Corporation. All rights reserved. CVI, DAQCard, DAQ-STC, LabVIEW, Measurement Studio, MITE, National Instruments, National Instruments Alliance Partner, NI, ni.com,
RTSI, and SCXI are trademarks of National Instruments. Linux® is a registered trademark of Linus Torvalds in the U.S. and other countries. Other product and company names listed are trademarks or
trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
相关型号：
©2020 ICPDF网 联系我们和版权申明