NIPS-3 [NI]
C Series Analog Output Modules; C系列模拟量输出模块
| 型号： | NIPS-3 |
| 厂家： | 
National Instruments |
| 描述： | C Series Analog Output Modules |
| 文件： | 总5页 (文件大小：1344K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
C Series Analog Output Modules
NI 9263, NI 9265 NEW!
• ±13 ꢀ and 3 to 23 mA analog
output ranges, 16-bit resolution,
133 kS/s simultaneous update rate
• ±±3 ꢀ overvoltage protection and
short-circuit protection for direct
connection to actuators and
industrial devices
• 4 channels per module
• Excellent relative accuracy optimized
for single-point control applications
• Isolation up to 2,±33 ꢀrms (withstand),
up to 253 ꢀrms (continuous)
• NIST-traceable calibration certificate
for guaranteed accuracy
• Per-channel digital-to-analog
converter (DAC) for simultaneous
analog output
Compatibility
Max Update
Simultaneous
Updating Isolation Connector Options
Product
NI 926±
NI 9265
CompactRIO NI CompactDAQ Signal Type Channels Resolution (bits)
Rate (S/s)
133 k/ch
133 k/ch
Range
±13 ꢀ
3 to 23 mA
Current Drive
1 mA/ch
23 mA/ch
ꢀoltage
Current
4
4
16
16
Screw Terminal
Screw Terminal
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
–
Table 1. C Series Analog Output Modules Selection Guide
Overview
flexibility of a custom electrical circuit completely dedicated to your
input/output application. The reconfigurable FPGA hardware within
CompactRIO provides a variety of options for timing, triggering,
synchronization, change detection, digital pattern matching, or digital
communication. For instance, with CompactRIO you can implement a
circuit to generate complex arbitrary waveforms, perform filtering or
splining to generate a smooth output signal based on a choppy low-
speed output command, simulate a nonlinear sensor, or implement
amplitude/phase modulation.
High-performance analog output modules for National Instruments
CompactRIO embedded systems, R Series expansion chassis, and
NI CompactDAQ provide accurate signal generations. Each module
features built-in signal conditioning and an integrated connector with
screw terminal or cable options for flexible and low-cost signal wiring.
All modules feature the NI CompactRIO Extreme Industrial Certifications
and Ratings.
System Compatibility
Key Features
You can use NI C Series modules in multiple system types depending
on available software. Please see the table above for CompactRIO and
NI CompactDAQ module compatibility because not all modules work
with both systems. Many of the advanced features described apply
only to reconfigurable I/O systems and not to NI CompactDAQ.
• High-performance analog output signal generation for CompactRIO
embedded system, R Series expansion chassis, or NI CompactDAQ
• Screw terminals, strain relief, high-voltage, and cable options
• NI CompactRIO Extreme Industrial Certifications and Ratings
• Channel-to-earth ground double-isolation barrier for safety
and noise immunity
Advanced Features
Advanced features include ±±3 ꢀ overvoltage protection and short-circuit
protection, simultaneous 16-bit per-channel digital-to-analog converters
(DACs), high-speed settling, excellent monotonicity and NIST-traceable
calibration. The NI 926x modules include a channel-to-earth ground double-
isolation barrier for safety and noise immunity. The NI 9265 provides high-
performance, 3 to 23 mA analog outputs ideal for controlling industrial
pressure, flow, and position actuators. The NI 9265 requires a 9 to ±6 ꢀ
external power supply for driving the output current of the module.
When used in CompactRIO, C Series analog output modules connect
directly to reconfigurable I/O (RIO) FPGA hardware to create high-
performance embedded systems hat deliver the optimization and
ꢀisit ni.com/compactrio or ni.com/compactdaq for up-to-date
information on module availability, example programs, application notes,
and other developer tools.
North American
Hazardous Locations
Typical certifications – Actual specifications vary from product to
product. ꢀisit ni.com/certification for details.
C Series Module Accessories
The NI 99±4 includes a screw-terminal connector with strain relief
as well as a D-Sub solder-cup backshell for creating custom cable
assemblies for any module with a 25-pin D-Sub connector.
Connectivity Accessories
CompactRIO and NI CompactDAQ systems are designed to provide
flexible options for low-cost field wiring and cabling. Most C Series
modules have a unique connector block option to provide secure and safe
connections to your CompactRIO or NI CompactDAQ system. The table below
contains all of the connector blocks available for C Series I/O modules.
Accessory
NI 99±2
NI 99±±
NI 99±4
NI 99±5
NI 99±6
Description
13-position strain relief and high-voltage screw-terminal connector kit
±7-pin D-Sub connector kit with strain relief and D-Sub shell
25-pin D-Sub connector kit with strain relief and D-Sub shell
15-pin D-Sub connector kit with strain relief and D-Sub shell
13-position screw-terminal plugs (quantity 13)
Figure 6. NI 9934 25-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
Note: To meet shock and vibration requirements, you must affix ferrules to the ends of the wires on all
screw-terminal connectors.
The NI 99±5 includes a screw-terminal connector with strain relief
as well as a D-Sub solder-cup backshell for creating custom cable
assemblies for any module with a 15-pin D-Sub connector.
Figure 2. cRIO-9932 Strain
Relief and High-Voltage
Connector Kit
Figure 3. cRIO-9936
10-Position Screw-
Terminal Plugs
Figure 1. cRIO-9937
Power Supply Plugs
The table below lists the recommended connector block accessories
for each CompactRIO analog output module.
C Series Analog Output Module
Recommended Module Accessory
NI 99±2, NI 99±6
NI 926±
NI 9265
Figure 7. NI 9935 15-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
NI 99±2, NI 99±6
The NI 99±6 consists of 13-position screw-terminal plugs for any
13-position screw-terminal module.
The NI 99±2 kit provides strain relief and operator protection from
high-voltage signals for any 13-position screw-terminal module.
Figure 4. NI 9932 10-Position Strain Relief and High-Voltage Screw-Terminal Connector Kit
Figure 8. NI 9936 10-Position Screw-Terminal Plugs
The NI 99±± includes a screw-terminal connector with strain relief
as well as a D-Sub solder-cup backshell for creating custom cable
assemblies for any module with a ±7-pin D-Sub connector.
ꢀisit ni.com/compactrio or ni.com/compactdaq for up-to-date
information on availability of accessories.
Figure 5. NI 9933 37-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
2
CompactRIO Ordering Information
Ordering Information
Developer Kits
NI 9236 ..................................................................................779526-31
NI 9211 ..................................................................................779331-31
NI 9215 ..................................................................................779311-31
NI 9215 with BNC..................................................................7791±8-31
NI 9217 ..................................................................................779592-31
NI 9221 ..................................................................................779314-31
NI 9221 with D-Sub ..............................................................779±7±-31
NI 92±± ..................................................................................779315-31
NI 92±7 ..................................................................................779521-31
Analog Output Module
NI 926± ..................................................................................779312-31
NI 9265 ..................................................................................779±±4-31
Digital Input and Counter/Timer Modules
NI 9431 ..................................................................................779±51-31
NI 9411 ..................................................................................779335-31
NI 9421 ..................................................................................779332-31
NI 9421 with D-Sub ..............................................................7791±6-31
NI 9422 ..................................................................................779522-31
NI 942± ..................................................................................779339-31
NI 9425 ..................................................................................7791±9-31
NI 94±5 ..................................................................................779313-31
NI cRIO-9961 Embedded System Developer
Hardware Evaluation Kit ..................................................779137-31
NI Reconfigurable I/O
Software Development Kit................................................779149-3±
Reconfigurable Embedded Systems
Real-Time Controllers
NI cRIO-9332 ........................................................................779333-31
NI cRIO-9334 ........................................................................779355-31
Reconfigurable Chassis
NI cRIO-9131 ........................................................................779352-31
NI cRIO-9132 ........................................................................779337-31
NI cRIO-913± ........................................................................77935±-31
NI cRIO-9134 ........................................................................779354-31
Power Supplies
NI PS-1 ..................................................................................777567-31
NI PS-2
U.S. 123 ꢀAC/Japan 133 ꢀAC ..........................................777584-31
North American 243 ꢀAC..................................................777584-35
NI PS-±
Digital Output and Relay Modules
NI 9431 ..................................................................................779±51-31
NI 9472 ..................................................................................779334-31
NI 9472 with D-Sub ..............................................................7791±7-31
NI 9474 ..................................................................................77933±-31
NI 9476 ..................................................................................779143-31
NI 9477 ..................................................................................779517-31
NI 9481 ..................................................................................779336-31
U.S. 123 ꢀAC/Japan 133 ꢀAC ..........................................777585-31
North American 243 ꢀAC..................................................777585-35
NI PS-4 ..................................................................................778586-93
NI PS-5 ..................................................................................778835-93
R Series Expansion Systems
Expansion Chassis
NI cRIO-9151 chassis ............................................................779338-31
SH68-C68-S cable, 2 m ........................................................186±81-32
Accessories
NI 9912 ..................................................................................779319-31
NI 9915 ..................................................................................779318-31
NI 9917 ..................................................................................779454-31
NI 9918 ..................................................................................779455-31
NI 99±2 ..................................................................................779317-31
NI 99±± ..................................................................................77913±-31
NI 99±4 ..................................................................................779134-31
NI 99±5 ..................................................................................779316-31
NI 99±6 ..................................................................................779135-31
NI 99±7 ..................................................................................779136-31
NI 99±9 ..................................................................................192692-31
R Series Devices
PCI
NI PCI-7811R digital I/O........................................................779±6±-31
NI PCI-781±R digital I/O........................................................779±73-31
NI PCI-78±3R multifunction I/O ............................................779±61-31
NI PCI-78±1R multifunction I/O ............................................778797-31
NI PCI-78±±R multifunction I/O ............................................779±59-31
PXI
NI PXI-7811R digital I/O........................................................778833-31
NI PXI-781±R digital I/O........................................................779±62-31
NI PXI-78±3R multifunction I/O ............................................779±64-31
NI PXI-78±1R multifunction I/O ............................................778668-31
NI PXI-78±±R multifunction I/O ............................................779±63-31
Ethernet Cables
CAT5
5 m ....................................................................................182219-35
CAT5 Crossover
5 m ....................................................................................187±75-35
OEM Discounts Available
NI offers aggressive OEM pricing discounts for high-volume OEM
applications. Contact NI for a quote.
1
C Series Modules
Analog Input Modules
NI 9231 ..................................................................................77931±-31
NI 9231 with D-Sub ..............................................................779±72-31
NI 923± ..................................................................................779516-31
NI 9235 ..................................................................................779519-31
NI 9235 with D-Sub ..............................................................779±57-31
1ꢀisit ni.com/compactrio for up-to-date information on module availability.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S.) or go to ni.com/compactrio.
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
3
NI CompactDAQ Ordering Information
Ordering Information
System Chassis
Accessories
NI 9915 ..................................................................................779318-31
NI 9931 ..................................................................................77947±-31
NI 99±± ..................................................................................77913±-31
NI 9943 ..................................................................................779567-31
NI 9941 ..................................................................................779568-31
NI 9917 ..................................................................................779454-31
NI 9918 ..................................................................................779455-31
NI 99±2 ..................................................................................779317-31
NI 99±6 ..................................................................................779135-31
NI cDAQ-9172
U.S. (123 ꢀAC) ..................................................................779538-31
Switzerland (223 ꢀAC) ......................................................779538-32
Australia (243 ꢀAC) ..........................................................779538-3±
Europe (243 ꢀAC) ..............................................................779538-34
UK (243 ꢀAC) ....................................................................779538-36
Japan (133 ꢀAC)................................................................779538-37
1
C Series Modules
Analog Input Modules
Academic Bundles
NI 9235 ..................................................................................779519-31
NI 9235 with D-Sub ..............................................................779±57-31
NI 9236 ..................................................................................779526-31
NI 9211 ..................................................................................779331-31
NI 9215 ..................................................................................779311-31
NI 9215 with BNC..................................................................7791±8-31
NI 92±± ..................................................................................779315-31
NI 92±7 ..................................................................................779521-31
Standard Bundle....................................................................777448-63
Instrumentation Bundle ........................................................777448-61
DSA (Sound and ꢀibration) Bundle ......................................777448-62
OEM Discounts Available
NI offers aggressive OEM pricing discounts for high-volume OEM
applications. Contact NI for a quote.
1ꢀisit ni.com/compactrio or ni.com/compactdaq for up-to-date information
on module availability.
Analog Output Module
NI 926± ..................................................................................779312-31
Digital Input Modules
NI 9431 ..................................................................................779±51-31
NI 9421 ..................................................................................779332-31
NI 9421 with D-Sub ..............................................................7791±6-31
Digital Output and Relay Modules
NI 9431 ..................................................................................779±51-31
NI 9472 ..................................................................................779334-31
NI 9472 with D-Sub ..............................................................7791±7-31
NI 9481 ..................................................................................779336-31
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S.) or go to ni.com/compactdaq.
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
4
NI Services and Support
NI has the services and support to meet
Local Sales and Technical Support
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
ꢀisit ni.com/services.
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,333 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
SERVICE
NEEDS
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. ꢀisit ni.com/ssp.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
that identifies individuals who have high levels of skill and knowledge on Trained NI technicians install the software and hardware and configure
using NI products. ꢀisit ni.com/training.
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online with
Professional Services
Our Professional Services Team is comprised of NI applications engineers, ni.com/pxiadvisor.
NI Consulting Services, and a worldwide National Instruments Alliance
Calibration Services
Partner program of more than 633 independent consultants and
integrators. Services range from
start-up assistance to turnkey
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. ꢀisit ni.com/calibration.
system integration.
ꢀisit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
ꢀisit ni.com/services.
ni.com • (800) 813 3693
*342609A-01*
342609A-01
2006-7079-301-101-D
National Instruments • info@ni.com
© 2006 National Instruments Corporation. All rights reserved. CompactRIO, National Instruments, National Instruments Alliance Partner, NI, ni.com, NI CompactDAQ,
and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.
A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
相关型号：
©2020 ICPDF网 联系我们和版权申明