NIPXI7951R [NI]
16-Channel, 50 MS/s, 14-Bit Digitizer Adapter Module for NI FlexRIO;
| 型号： | NIPXI7951R |
| 厂家： | 
National Instruments |
| 描述： | 16-Channel, 50 MS/s, 14-Bit Digitizer Adapter Module for NI FlexRIO |
| 文件： | 总14页 (文件大小：548K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technical Sales
United States
(866) 531-6285
info@ni.com
Detailed Specifications | Pinouts/Front Panel Connections
For user manuals and dimensional drawings, visit the product page resources tab on ni.com.
Last Revised: 2013-03-19 09:30:02.0
16-Channel, 50 MS/s, 14-Bit Digitizer Adapter Module for NI FlexRIO
NI 5751
16 simultaneously sampled 50 MS/s channels
14-bit vertical resolution
8 general-purpose digital input and output lines for system stimulus and control
Well-suited for applications ranging from research to large-scale deployment
Requires NI FlexRIO FPGA module
2 Vpp, 50 Ω single-ended inputs with DC coupling
Overview
Experiments and measurements in areas such as experimental physics, nondestructive test, and medical imaging can span across tens or hundreds of channels, requiring not
only a system with high-channel density but also a way to retrieve and transfer the data and/or measurements of interest. The NI 5751 digitizer adapter module for NI FlexRIO
provides the unique combination of high-channel density, scalability with PXI and PXI Express, and a fully programmable FPGA, which you can add for tasks such as custom
triggering or inline signal processing. Eight digital inputs and outputs offer further benefits as system stimulus or control signals.
Back to Top
Application and Technology
Key Specifications
Table 1. Key Typical Specifications of the NI 5751
Combined with an NI FlexRIO FPGA module, the NI 5751 provides a powerful solution for applications requiring a high-channel-count digitizer with low crosstalk, the small form
factor and scalability of PXI, and a user-accessible FPGA for custom real-time processing.
1/14
www.ni.com
Figure 1. NI 5751 Characteristic Dynamic Performance, Spectrum – 64 k Samples, 5.3 MHz, -1 dBFS Input Signal
Application Areas
Table 2. Applications and Example Algorithms for the NI 5751
About NI FlexRIO
The NI FlexRIO family consists of PXI and PXI Express field-programmable gate array (FPGA) modules coupled to I/O adapter modules. Programmed with the NI LabVIEW
FPGA Module, these modules together provide high-performance I/O and user-defined hardware processing on the PXI platform.
Figure 2. NI FlexRIO Architecture
NI FlexRIO FPGA modules feature the latest in FPGA technology and high-performance bus interfaces.
Table 3. NI FlexRIO FPGA Module Options
PXI Express NI FlexRIO FPGA modules feature Xilinx Virtex-5 SXT FPGAs with up to 512 MB of onboard DRAM, which you can access at bandwidths up to 3.2 GB/s. In addition
to general-purpose reconfigurable logic, SXT FPGAs are optimized for high-speed digital signal processing (DSP), with up to 640 DSP slices for single-cycle multiplication and
filtering functions. PXI Express NI FlexRIO FPGA modules also feature the NI STC-3 application-specific integrated circuit (ASIC), providing an optimized, high-bandwidth PCI
Express x4 communications link to the backplane of the PXI Express chassis. This ASIC reduces the FPGA resources needed to implement host communication and enables new
data transfer technology in the unique peer-to-peer (P2P) streaming feature. With NI P2P data streaming technology, you can continuously transfer data to and from PXI Express
2/14
www.ni.com
NI FlexRIO FPGA modules at rates greater than 800 MB/s for additional processing and I/O integration. You can also stream to and from select PXI Express NI modular
instruments for an even greater variety of I/O.
PXI NI FlexRIO FPGA modules feature Xilinx Virtex-5 LX FPGAs with up to 128 MB of onboard DRAM, which you can access at bandwidths up to 1.6 GB/s. They feature all the
benefits of the PXI platform including synchronization, triggering, and high-speed data transfer to and from their host.
Table 4. PXI and PXI Express FPGA Module Comparison
National Instruments and third parties offer NI FlexRIO adapter modules, and you can build your own adapter modules using the NI FlexRIO Adapter Module Development Kit
(MDK). With custom adapter modules, you can implement the exact analog and digital I/O your application requires, along with graphical FPGA programming provided by
LabVIEW. View a current list of NI and third-party adapter modules at ni.com/flexrio. This ability to easily create high-bandwidth P2P data streams helps provide scalable signal
processing and I/O integration.
LabVIEW FPGA
With the high-level graphical programming capabilities of LabVIEW FPGA, programming for the NI 5751 is far simpler than low-level HDL programming. Acquiring samples from
one NI FlexRIO digitizer adapter module's analog-to-digital converter at its configured rate and placing the data into an FPGA FIFO is depicted in Figure 3.
Figure 3. LabVIEW FPGA Code for Acquiring Data from an NI FlexRIO Digitizer Adapter Module
From this point, you may implement your own processing, filtering, fast Fourier transform (FFT), or control. Figure 4 shows custom demodulation using IP from the FPGA RF
Communications Library on ni.com/labs.
Figure 4. LabVIEW FPGA Code for Demodulating and Decoding I and Q Signals after 4X Decimation
For implementing a real-time spectrum analyzer, Figure 5 shows code that performs windowing, conversion to the frequency domain, comparison against a frequency mask, and
assertion of a trigger when that mask is exceeded.
3/14
www.ni.com
Figure 5. LabVIEW FPGA Code for a Real-Time Spectrum Analyzer
Finally, Figure 6 shows a custom, 128-tap inline finite impulse response (FIR) filter with reloadable coefficients. After filtering, the data is generated through a digital-to-analog
converter.
Figure 6. LabVIEW FPGA Code for an Inline Filter
Back to Top
Support and Services
System Assurance Programs
NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI,
CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely
assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application
development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software preinstalled.
When you order your system with the standard program, you also receive system-specific documentation including a bill of materials, an integration test report, a recommended
maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty
coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs.
Technical Support
Get answers to your technical questions using the following National Instruments resources.
Support - Visit ni.com/support to access the NI KnowledgeBase, example programs, and tutorials or to contact our applications engineers who are located in NI sales
offices around the world and speak the local language.
Discussion Forums - Visit forums.ni.com for a diverse set of discussion boards on topics you care about.
Online Community - Visit community.ni.com to find, contribute, or collaborate on customer-contributed technical content with users like you.
Repair
While you may never need your hardware repaired, NI understands that unexpected events may lead to necessary repairs. NI offers repair services performed by highly trained
technicians who quickly return your device with the guarantee that it will perform to factory specifications. For more information, visit ni.com/repair.
Training and Certifications
The NI training and certification program delivers the fastest, most certain route to increased proficiency and productivity using NI software and hardware. Training builds the skills
to more efficiently develop robust, maintainable applications, while certification validates your knowledge and ability.
Classroom training in cities worldwide - the most comprehensive hands-on training taught by engineers.
On-site training at your facility - an excellent option to train multiple employees at the same time.
Online instructor-led training - lower-cost, remote training if classroom or on-site courses are not possible.
Course kits - lowest-cost, self-paced training that you can use as reference guides.
Training memberships and training credits - to buy now and schedule training later.
Visit ni.com/training for more information.
Extended Warranty
NI offers options for extending the standard product warranty to meet the life-cycle requirements of your project. In addition, because NI understands that your requirements may
change, the extended warranty is flexible in length and easily renewed. For more information, visit ni.com/warranty.
OEM
NI offers design-in consulting and product integration assistance if you need NI products for OEM applications. For information about special pricing and services for OEM
customers, visit ni.com/oem.
Alliance
Our Professional Services Team is comprised of NI applications engineers, NI Consulting Services, and a worldwide National Instruments Alliance Partner program of more than
700 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance.
Back to Top
4/14
www.ni.com
Detailed Specifications
This section lists the specifications of the NI FlexRIO adapter module (NI 5751). Pair these specifications with the specifications listed in the NI FlexRIO FPGA Module
Installation Guide and Specifications. For more information about safety and electromagnetic compatibility refer to the Read Me First: Safety and Electromagnetic Compatibility
document included in your hardware kit or available at ni.com/manuals.
Maximum and minimum specifications are warranted not to exceed these values within certain operating conditions and include the effects of temperature and uncertainty unless
otherwise noted.
Characteristic specifications are unwarranted values that are representative of an average unit operating at room temperature.
Typical specifications are unwarranted values that are representative of a majority (90%) of units within certain operating conditions and include the effects of temperature and
uncertainty unless otherwise noted.
These specifications are characteristic at 25 °C unless otherwise noted.
Absolute Maximum Ratings
Caution Stresses beyond those listed in this section may cause permanent damage to the adapter module. Avoid swapping the analog and digital cables because
doing so will short the digital output terminals to ground.
±2 V
Analog input overload
–0.5 V to 3.5 V
External clock input
–0.5 V to 3.5 V
Digital input
2 mA
Digital output current
Analog Input (AI 0 to AI 15)
General Characteristics
VHDCI. For pinout, refer to NI 5751 Pinout—Analog Input CH 0 to 15
Type of connector
16 single-ended
Number of channels
2 V
pp
Max input voltage swing
Input impedance
50 Ω ±2%
DC coupled
Coupling
AD9252, 14-bit pipelined analog-to-digital converter
ADC manufacturer part number
Note For additional information on the AD9252, refer to the device datasheet at www.analog.com.
Specific Characteristics
NI 5751 Characteristic Frequency Response
NI 5751 Characteristic Frequency Response
5/14
www.ni.com
26 MHz
Bandwidth (–3 dB)
DC gain error
DC offset error
Crosstalk
±2% of input
±2% of FS
–75 dB at 1 MHz, –65 dB at 5 MHz, Measured on one channel with test
signal applied to another channel
71 dB, –1 dBFS input signal, f = 5 MHz
in
Signal-to-noise ratio (SNR)
Spurious-free dynamic range (SFDR)
Total harmonic distortion (THD)
Average noise density
73 dBc, –1 dBFS input signal, f = 5 MHz
in
73 dBc, –1 dBFS input signal, f = 5 MHz
in
–147 dBFS/Hz
NI 5751 Characteristic Dynamic Performance, Spectrum-64 k Samples, 5.3 MHz, –1 dBFS Input Signal
NI 5751 Characteristic Noise Density, Spectrum-64 k Samples
Sample Clock
Sample clock sources
50 MHz onboard clock
1
2
Sync Clock (DStarA)
2
CLK IN (front panel SMB)
6/14
www.ni.com
2
30 MHz to 50 MHz
Sample clock frequency range
CLK IN
General Characteristics
Connector
SMB
3.3 V CMOS
2.2 V
Logic Level
V
IH
0.6 V
V
IL
> 50 kΩ
DC
Input impedance
Input coupling
Duty cycle
45% to 55%
Digital Input Terminals
General Characteristics
Number of channels
8
VHDCI. For pinout, refer to NI 5751 Pinout—Digital Connector
Connector
Minimum high-level input voltage
2.0 V
V
(min)
IH
Maximum low-level input voltage
(max)
0.8 V
V
IL
Digital Output Terminals
General Characteristics
Number of channels
8
VHDCI. For pinout, refer to NI 5751 Pinout—Digital Connector
Connector
Minimum high-level output voltage
2.4 V
V
(min)
OH
Maximum low-level output voltage
(max)
0.55 V
V
OL
1 mA
Maximum output current
Minimum pulse width
10 ns
1 MHz, All outputs toggling
Maximum toggle frequency
Hardware Block Diagram
NI 5751 Hardware Block Diagram
7/14
www.ni.com
NI 5751 FlexRIO CLIP Node Wire Descriptions
NI 5751 CLIP Node IO Descriptions
Function
Port Name
Type
AI A<0..7> I16
Data from each of the eight channels on ADC A. If you are using the NI 5751 CLIP, data is clocked out of the CLIP on IO Module Clock 0. If you are
using the NI 5751 Multidevice Synchronization CLIP, data is clocked out of the CLIP on DStarA. After Initialization Done is asserted the data is valid
on every clock cycle.
AI
I16
Data from each of the eight channels on ADC B. If you are using the NI 5751 CLIP, data is clocked out of the CLIP on IO Module Clock 0. If you are
using the NI 5751 Multidevice Synchronization CLIP, data is clocked out of the CLIP on DStarA. After Initialization Done is asserted the data is valid
on every clock cycle.
B<8..15>
DI <0..7>
Boolean Digital Input. Refer to the Digital Input Terminals section for more information.
DO <0..7> Boolean Digital Output. Refer to the Digital Output Terminals section for more information.
Digital
Output
Enable
Boolean Enables the digital outputs.
IO Module FPGA
The ADC sample clock.
Clock 0
Clock
Sample
Clock
U8
3
Selects which clock is used as the ADC sample clock. When Sample Clock Select is changed, the data capture circuit is reinitialized. This signal
should be inside a single-cycle timed loop with a clock source of the 40 MHz onboard clock.
Select
3
Force
Boolean
Forces a CLIP initialization. If you are using an external clock and the clock frequency changes, this signal must be manually asserted. ADC registers
Initialization
retain their values when Force Initialization is manually asserted. This signal should be inside a single-cycle timed loop with a clock source of the
40 MHz onboard clock.
3
Initialization Boolean
Done
When this signal is asserted, initialization of the CLIP has completed. This signal should be inside a single-cycle timed loop with a clock source of the
40 MHz onboard clock.
8/14
www.ni.com
NI 5751 CLIP Node IO Descriptions
Function
Port Name
Type
ADC Error Boolean When ADC Error A is asserted the width of the sampling window from ADC A has shrunk below its required value, which does not guarantee that the
A
data can be sampled correctly. This could be caused by a noisy clock source, a damaged ADC, or an incompatible NI FlexRIO FPGA module. ADC
3
Error A is a sticky bit and is cleared upon reinitialization.
ADC Error Boolean When ADC Error B is asserted the width of the sampling window from ADC B has shrunk below its required value, which does not guarantee that the
B
data can be sampled correctly. This could be caused by a noisy clock source, a damaged ADC, or an incompatible NI FlexRIO FPGA module. ADC
3
Error B is a sticky bit and is cleared upon reinitialization.
PLL
Boolean Indicates that the PLL has become unlocked since the board was initialized. When the PLL is unlocked IO Mod Clock 0 is disabled. When set, PLL
3
Unlocked
Unlocked is cleared upon reinitialization. This signal should be inside a single-cycle timed loop with a clock source of the 40 MHz onboard clock.
4
Boolean Indicates the SPI engine is idle and ready for a SPI read or write transaction. This signal should be inside a single-cycle timed loop with a clock source
of the 40 MHz onboard clock.
SPI Idle
SPI Device U8
Selects which ADC the SPI port will communicate with. This signal should be inside a single-cycle timed loop with a clock source of the 40 MHz onboard
clock.
4
Select
SPI
U8
The address of the register in the ADC selected. This signal should be inside a single-cycle timed loop with a clock source of the 40 MHz onboard clock.
4
Address
SPI Write
U16
Data to be written to the register in the ADC selected. This signal should be inside a single-cycle timed loop with a clock source of the 40 MHz onboard
clock.
4
Data
4
Boolean Begin SPI write transaction. The SPI Write signal should be inside a single-cycle timed loop with a clock source of the 40 MHz onboard clock.
SPI Write
Initialization
During initialization, the CLIP does the following:
Resets a PLL in the CLIP that is used to receive data from the ADCs.
Resets the deserialization circuit.
Recalibrates the data delays for capturing the data using dynamic phase alignment.
Aligns the two ADC ICs to each other.
Clears ADC Error X.
Manual Initialization
The user FPGA code must manually start initialization in the following instance:
When using DStarA or CLK IN as the ADC sample clock and the frequency of the clock has changed since the last initialization.
To manually start initialization, the user FPGA code must assert Force Initialization.
Note When initialization starts, the Initialization Done signal deasserts within 100 ns. Initialization Done does not assert again until initialization has completed. You can
expect a delay of up to 2 seconds before Initialization Done asserts again, depending on your clock rate. If you read the Initialization Done indicator before it has had
time to deassert (100 ns), you may get a false positive.
Automatic Initialization
The CLIP performs initialization automatically in the following instances:
The FPGA IO is enabled to the NI 5751
The user FPGA code changes the Sample Clock Select signal
FPGA IO is enabled automatically when the CLIP is loaded into the FPGA. You can also programmatically enable and disable the FPGA IO from the host VI. When FPGA IO is
enabled, the CLIP resets all ADC registers.
Caution Do not execute user FPGA code using IO Module Clock 0 until Initialization Done is True. While Initialization Done is False, the clocks are not stable.
If the user FPGA code changes the Sample Clock Select signal, the CLIP begins initialization automatically; you do not need to assert Force Initialization.
Note When initialization starts, the Initialization Done signal deasserts within 100 ns. Initialization Done does not assert again until initialization has completed. You can
expect a delay of up to 2 seconds before Initialization Done asserts again, depending on your clock rate. If you read the Initialization Done indicator before it has had
time to deassert (100 ns), you may get a false positive.
Accessing SPI Registers
The ADC register maps are included in the AD9252 datasheet. The following application note found on Analog Devices' Web site contains more information and SPI functionality
for the AD9252: AN-877 Application Note, Interfacing to High Speed ADCs via SPI.
SPI reads from the AD9252 are not supported on the NI 5751. The SPI access does not actually take effect until the software transfer bit (bit 0) of the device_update (offset
0xFF) register is written.
To access a register in an ADC, complete the following steps:
9/14
www.ni.com
1. Configure the following:
SPI Device Select with which ADC to access.
SPI Address with the register offset.
SPI Write Data with the write data.
2. Set SPI Write for a write transaction.
3. Poll for SPI Idle to be True.
Power
Power requirements from the NI FlexRIO FPGA module
+12 V
200 mA, 2.4 W max
900 mA, 2.97 W max
5.37 W
+3.3 V
Total power
Physical
12.9 × 2.0 × 12.1 cm (5.1 × 0.8 × 4.7 in.)
284 g (10 oz)
Dimensions
Weight
One SMB connector and two 68-pin VHDCI connectors
Front panel connectors
Environmental
This device is intended for indoor use only.
Operating environment
0 °C to 55 °C, Tested in accordance with IEC-60068-2-1
and IEC-60068-2-2.
10% to 90%, noncondensing, Tested in accordance with IEC-60068-2-56.
Relative humidity range
Altitude
2,000 m
2
Pollution Degree
Storage environment
Ambient temperature range
–20 °C to 70 °C, Tested in accordance with IEC-60068-2-1 and
IEC-60068-2-2.
5% to 95%, noncondensing, Tested in accordance with IEC-60068-2-56.
Relative humidity range
Note Clean the device with a soft, non-metallic brush. Make sure that the device is completely dry and free from contaminants before returning it to service.
Compliance and Certifications
Safety Standards
This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use:
IEC 61010-1, EN 61010-1
UL 61010-1, CSA 61010-1
Note For UL and other safety certifications, refer to the product label or the Online Product Certification section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use:
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
Note For EMC declarations and certifications, refer to the Online Product Certification section.
Note When operating this product, use shielded cables and accessories.
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows:
2006/95/EC; Low-Voltage Directive (safety)
10/14
www.ni.com
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
To obtain product certifications and the DoC for this product, visit ni.com/certification, search by module number or product line, and click the appropriate link in the Certification
column.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our
products is beneficial not only to the environment but also to NI customers.
For additional environmental information, refer to the NI and the Environment Web page at ni.com/environment. This page contains the environmental regulations and directives
with which NI complies, as well as other environmental information not included in this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers At the end of the product life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers, National
Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste Electrical and Electronic Equipment, visit ni.com/environment/weee.htm.
1
Sync Clock (DStarA) is only available on NI PXI Express FlexRIO FPGA modules (such as the NI PXIe-796xR). On PXI Express modules, Sync Clock is driven by the DStarA
from the PXI/PXIe backplane. For PXI modules (such as the NI PXI-795xR), Sync Clock (DStarA) is not available.
2
If you change the frequency of Sync Clock (DStarA) or CLK IN (when used as the sample clock), you must assert Force Initialization. For more information, refer to the
Initialization section.
3
For more information, refer to the Initialization section.
4
For more information, refer to the Accessing SPI Registers section.
Back to Top
11/14
www.ni.com
Pinouts/Front Panel Connections
NI 5751 Front Panel Connectors
Number Signal Description
Digital input
DI 0–7
terminals
1
DO Digital output
0–7
terminals
External
2
3
CLK IN sample clock
input
AI 0 Single-ended
through analog input
AI 15
channels
12/14
www.ni.com
NI 5751 Pinout-Digital Connector
13/14
www.ni.com
NI 5751 Pinout-Analog Input CH 0 to 15
Back to Top
©2010 National Instruments. All rights reserved. CompactRIO, FieldPoint, LabVIEW, National Instruments, National Instruments Alliance Partner, NI, ni.com, and NI FlexRIO are trademarks of National Instruments.
Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has
no agency, partnership, or joint-venture relationship with National Instruments.
My Profile | RSS | Privacy | Legal | Contact NI © 2012 National Instruments Corporation. All rights reserved.
14/14
www.ni.com
相关型号：
©2020 ICPDF网 联系我们和版权申明