USB-6008 [NI]
8 analog inputs at 12 or 14 bits,up to 48 kS/s; 8个模拟输入,12位或14位, 48 kS / s的型号: | USB-6008 |
厂家: | National Instruments |
描述: | 8 analog inputs at 12 or 14 bits,up to 48 kS/s |
文件: | 总5页 (文件大小:197K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low-Cost, Bus-Powered Multifunction DAQ for USB –
12- or 14-Bit, up to 48 kS/s, 8 Analog Inputs
NI USB-6008, NI USB-6009
• 8 analog inputs at 12 or 14 bits,
up to 48 kS/s
Recommended Software
• LabVIEW
• 2 analog outputs at 12 bits,
software-timed
• 12 TTL/CMOS digital I/O lines
• 32-bit, 5 MHz counter
• Digital triggering
• LabVIEW SignalExpress
• LabWindows™/CVI
• Measurement Studio
Other Compatible Software
• C#, Visual Basic .NET
• ANSI C/C++
• Bus-powered
• 1-year warranty
Measurement Services
Software (included)
• NI-DAQmx driver software
• Measurement & Automation
Explorer configuration utility
• LabVIEW SignalExpress LE
Operating Systems
• Windows Vista (32- and 64-bit)/XP/2000
• Mac OS X1
®1
• Linux
• Windows Mobile1
• Windows CE1
1You need to download NI-DAQmx
Base for these operating systems.
Input
Resolution
(bits)
Max
Sampling Rate
(kS/s)
Input
Range
(V)
Output
Resolution
(bits)
Output
Rate
(Hz)
Output
Range
(V)
Digital
I/O
Lines
Analog
Inputs1
Analog
Outputs
32-Bit
Counter Trigger
Product
USB-6009
USB-6008
Bus
USB
USB
8 SE/4 DI
8 SE/4 DI
14
12
48
10
1 to 20
1 to 20
2
2
12
12
150
150
0 to 5
0 to 5
12
12
1
1
Digital
Digital
1SE = single ended, DI = differential 2Software-timed
driver software for application development in NI LabVIEW, LabVIEW
SignalExpress, LabWindows/CVI, and Measurement Studio software.
To obtain the latest version of NI-DAQmx, visit
Overview and Applications
With recent bandwidth improvements and new innovations from
National Instruments, USB has evolved into a core bus of choice for
measurement applications. The NI USB-6008 and USB-6009 are low-
cost entry points to NI flagship data acquisition (DAQ) devices. With
plug-and-play USB connectivity, these modules are simple enough for
quick measurements but versatile enough for more complex
measurement applications.
ni.com/support/daq/versions.
NI measurement services software speeds up your development with
features including:
• A guide to create fast and accurate measurements with no
programming using the DAQ Assistant.
• Automatic code generation to create your application in LabVIEW.
• LabWindows/CVI; LabVIEW SignalExpress; and C#, Visual Studio .NET,
ANSI C/C++, or Visual Basic using Measurement Studio.
• Multithreaded streaming technology for 1,000 times
performance improvements.
The USB-6008 and USB-6009 are ideal for a number of applications
where low cost, small form factor, and simplicity are essential.
Examples include:
• Data logging – quick and easy environmental or voltage data logging
• Academic lab use – student ownership of DAQ hardware for
completely interactive lab-based courses (Academic pricing available.
Visit ni.com/academic for details.)
• Automatic timing, triggering, and synchronization routing
to make advanced applications easy.
• More than 3,000 free software downloads available at
ni.com/zone to jump-start your project.
• OEM applications as I/O for embedded systems
• Software configuration of all digital I/O features without
hardware switches/jumpers.
Recommended Software
National Instruments measurement services software, built around
NI-DAQmx driver software, includes intuitive application programming
interfaces, configuration tools, I/O assistants, and other tools
designed to reduce system setup, configuration, and development time.
National Instruments recommends using the latest version of NI-DAQmx
• Single programming interface for analog input, analog output,
digital I/O, and counters on hundreds of multifunction DAQ hardware
devices. M Series devices are compatible with the following versions
(or later) of NI application software – LabVIEW, LabWindows/CVI, or
Measurement Studio versions 7.x; and LabVIEW SignalExpress 2.x.
Low-Cost, Bus-Powered Multifunction DAQ for USB – 12- or 14-Bit, up to 48 kS/s, 8 Analog Inputs
Every M Series data acquisition device also includes a copy of
Information for Student Ownership
To supplement simulation, measurement, and automation theory courses
LabVIEW SignalExpress LE data-logging software, so you can quickly
acquire, analyze, and present data without programming. The NI-DAQmx
with practical experiments, NI has developed the USB-6008 and USB-6009
Base driver software is provided for use with Linux, Mac OS X,
student kits, which include the LabVIEW Student Edition and a ready-to-run
Windows Mobile, and Windows CE operating systems.
data logger application. These kits are exclusively for students, giving them
Recommended Accessories
a powerful, low-cost, hands-on learning tool. Visit ni.com/academic for
more details.
The USB-6008 and USB-6009 have removable screw terminals for easy
signal connectivity. For extra flexibility when handling multiple wiring
configurations, NI offers the USB-600x Connectivity Kit, which includes
two extra sets of screw terminals, extra labels, and a screwdriver.
In addition, the USB-600x Prototyping Kit provides space for adding
more circuitry to the inputs of the USB-6008 or USB-6009.
Information for OEM Customers
For information on special configurations and pricing, call (800) 813 3693
(U.S. only) or visit ni.com/oem. Go to the Ordering Information section
for part numbers.
NI USB DAQ for OEMs
Shorten your time to market by integrating world-class National
Instruments OEM measurement products into your embedded system
design. Board-only versions of NI USB DAQ devices are available for
OEM applications, with competitive quantity pricing and available
software customization. The NI OEM Elite Program offers free 30-day
trial kits for qualified customers. Visit ni.com/oem for more information.
Ordering Information
NI USB-60081 ........................................................................779051-01
NI USB-60091 ........................................................................779026-01
NI USB-6008 OEM ................................................................193132-02
NI USB-6009 OEM ................................................................193132-01
NI USB-6008 Student Kit1,2 ..................................................779320-22
NI USB-6009 Student Kit1,2 ..................................................779321-22
NI USB-600x Connectivity Kit ..............................................779371-01
NI USB-600x Prototyping Kit ................................................779511-01
1 Includes NI-DAQmx software, LabVIEW SignalExpress LE, and a USB cable.
2 Includes LabVIEW Student Edition.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S. only) or go to ni.com/usb.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
2
Low-Cost, Bus-Powered Multifunction DAQ for USB – 12- or 14-Bit, up to 48 kS/s, 8 Analog Inputs
Output range ....................................... 0 to +5 V
Specifications
Output impedance............................... 50 Ω
Output current drive............................ 5 mA
Typical at 25 °C unless otherwise noted.
Analog Input
Absolute accuracy, single-ended
Power-on state.................................... 0 V
Slew rate............................................. 1 V/µs
Short-circuit current............................ 50 mA
Range
Typical at 25 ˚C (mV)
Maximum (0 to 55 ˚C) (mV)
10
14.7
138
Digital I/O
Number of channels............................ 12 total
Absolute accuracy at full scale, differential1
8 (P0.<0..7>)
Range
Typical at 25 ˚C (mV)
Maximum (0 to 55 ˚C) (mV)
4 (P1.<0..3>)
Direction control ................................. Each channel individually
programmable as input or output
20
10
5
4
2.5
2
14.7
7.73
4.28
3.59
2.56
2.21
1.70
1.53
138
84.8
58.4
53.1
45.1
42.5
38.9
37.5
Output driver type
USB-6008........................................ Open-drain
USB-6009........................................ Each channel individually
programmable as push-pull or
1.25
1
open-drain
Compatibility....................................... CMOS, TTL, LVTTL
Internal pull-up resistor ...................... 4.7 kΩ to +5 V
Power-on state.................................... Input (high impedance)
Absolute maximum voltage range...... -0.5 to +5.8 V
Number of channels............................ 8 single-ended/4 differential
Type of ADC ........................................ Successive approximation
ADC resolution (bits)
Module
USB-6008
USB-6009
Differential
Single-Ended
Digital logic levels
12
14
11
13
Level
Min
-0.3
2.0
–
–
2.0
2.0
Max
0.8
5.8
50
0.8
3.5
5.0
Units
V
V
µA
V
V
Input low voltage
Input high voltage
Input leakage current
Output low voltage (I = 8.5 mA)
Output high voltage (push-pull, I = -8.5 mA)
Output high voltage (open-drain, I = -0.6 mA, nominal)
Output high voltage (open-drain, I = -8.5 mA,
with external pull-up resistor)
Maximum sampling rate (system dependent)
Module
Maximum Sampling Rate (kS/s)
USB-6008
USB-6009
10
48
V
2.0
–
V
Input range, single-ended................... 10 V
Input range, differential...................... 20, 10, 5, 4, 2.5, 2,
1.25, 1 V
Maximum working voltage................. 10 V
Overvoltage protection ....................... 35 V
FIFO buffer size ................................... 512 B
Timing resolution ................................ 41.67 ns (24 MHz timebase)
Timing accuracy .................................. 100 ppm of actual sample rate
Input impedance ................................. 144 kΩ
Trigger source...................................... Software or external digital trigger
System noise....................................... 5 m Vrms ( 10 V range)
Counter
Number of counters............................
Resolution ........................................... 32 bits
Counter measurements....................... Edge counting (falling edge)
Pull-up resistor.................................... 4.7 kΩ to 5 V
Maximum input frequency.................. 5 MHz
Minimum high pulse width................. 100 ns
Minimum low pulse width.................. 100 ns
Input high voltage............................... 2.0 V
1
Input low voltage................................ 0.8 V
Analog Output
Absolute accuracy (no load) ............... 7 mV typical, 36.4 mV maximum
Power available at I/O connector
+5 V output (200 mA maximum)......... +5 V typical
+4.85 V minimum
+2.5 V output (1 mA maximum).......... +2.5 V typical
+2.5 V output accuracy ....................... 0.25% max
Voltage reference temperature drift... 50 ppm/°C max
at full scale
2
Number of channels............................
Type of DAC ........................................ Successive approximation
DAC resolution.................................... 12 bits
Maximum update rate ........................ 150 Hz, software-timed
1Input voltages may not exceed the working voltage range.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
3
Low-Cost, Bus-Powered Multifunction DAQ for USB – 12- or 14-Bit, up to 48 kS/s, 8 Analog Inputs
Physical Characteristics
Safety and Compliance
If you need to clean the module, wipe it with a dry towel.
Dimensions (without connectors)....... 6.35 by 8.51 by 2.31 cm
(2.50 by 3.35 by 0.91 in.)
Dimensions (with connectors) ............ 8.18 by 8.51 by 2.31 cm
(3.22 by 3.35 by 0.91 in.)
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
Weight (without connectors) .............. 59 g (2.1 oz)
Weight (with connectors) ................... 84 g (3 oz)
I/O connectors..................................... USB series B receptacle
(2) 16-position (screw-terminal)
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note: For UL and other safety certifications, refer to the product label
or visit ni.com/certification, search by model number or product line,
and click the appropriate link in the Certification column.
plug headers
Screw-terminal wiring ........................ 16 to 28 AWG
Screw-terminal torque........................ 0.22 to 0.25 N•m
(2.0 to 2.2 lb•in.)
Electromagnetic Compatibility
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
Power Requirement
USB (4.10 to 5.25 VDC)....................... 80 mA typical
500 mA maximum
USB suspend....................................... 300 µA typical
500 µA maximum
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note: For EMC compliance, operate this device according to
product documentation.
Environmental
The USB-6008 and USB-6009 are intended for indoor use only.
Operating environment
Ambient temperature range........... 0 to 55 °C (tested in accordance
with IEC-60068-2-1
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
and IEC-60068-2-2)
Relative humidity range ................. 10 to 90%, noncondensing
(tested in accordance
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
with IEC-60068-2-56)
Note: Refer to the Declaration of Conformity (DoC) for this product for
any additional regulatory compliance information. To obtain the DoC for
this product, visit ni.com/certification, search by model number or
product line, and click the appropriate link in the Certification column.
Storage environment
Ambient temperature range........... -40 to 85 °C (tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2)
Waste Electrical and Electronic Equipment (WEEE)
Relative humidity range ................. 5 to 90%, noncondensing
(tested in accordance
with IEC-60068-2-56)
Maximum altitude............................... 2,000 m
(at 25 °C ambient temperature)
EU Customers: At the end of their life cycle, all products must be
sent to a WEEE recycling center. For more information about WEEE
recycling centers and National Instruments WEEE initiatives, visit
ni.com/environment/weee.htm.
Pollution degree..................................
2
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
4
NI Services and Support
NI has the services and support to meet
Local Sales and Technical Support
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
SERVICE
NEEDS
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
that identifies individuals who have high levels of skill and knowledge on Trained NI technicians install the software and hardware and configure
using NI products. Visit ni.com/training.
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online with
Professional Services
Our Professional Services Team is comprised of NI applications engineers, ni.com/pxiadvisor.
NI Consulting Services, and a worldwide National Instruments Alliance
Calibration Services
Partner program of more than 600 independent consultants and
integrators. Services range from
start-up assistance to turnkey
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
system integration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
ni.com • (800) 813 3693
*351378C-01*
351378C-01
2008-9621-301-101-D
National Instruments • info@ni.com
©2008 National Instruments. All rights reserved. CVI, LabVIEW, Measurement Studio, National Instruments, National Instruments Alliance Partner, NI, ni.com, SCXI, and SignalExpress
are trademarks of National Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the
®
United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. Other product and company names listed are trademarks or trade
names of their respective companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
相关型号:
USB-6221
This document provides dimensions, pinouts, and information about the connectors, switch, LEDs
NI
USB-6225
This document provides dimensions, pinouts, and information about the connectors, switch, LEDs
NI
USB-6229
This document provides dimensions, pinouts, and information about the connectors, switch, LEDs
NI
USB-622X
This document provides dimensions, pinouts, and information about the connectors, switch, LEDs
NI
USB-6251
This document provides dimensions, pinouts, and information about the connectors, switch, LEDs
NI
USB-6255
This document provides dimensions, pinouts, and information about the connectors, switch, LEDs
NI
USB-6259
This document provides dimensions, pinouts, and information about the connectors, switch, LEDs
NI
©2020 ICPDF网 联系我们和版权申明