USB-9472 [NI]
Portable USB-Based High-Voltage Digital I/O; 基于USB的便携式高压数字I / O型号: | USB-9472 |
厂家: | National Instruments |
描述: | Portable USB-Based High-Voltage Digital I/O |
文件: | 总2页 (文件大小:185K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Portable USB-Based
High-Voltage Digital I/O
NI USB-9421, NI USB-9472, NI USB-9481 NEW!
• Small, portable devices
Operating Systems
(12.1 by 8.6 by 2.5 cm)
• 4 or 8 channels with 24 V
logic levels
• High current-switching capacity
• 250 Vrms channel-to-earth
ground isolation
• Plug-and-play connectivity
via USBs
• Screw-terminal and D-Sub
connectors for direct wiring to
industrial sensors and actuators
• Windows 2000/XP
Recommended Software
• LabVIEW
• LabWindows/CVI
Measurement Services
Software (included)
• NI-DAQmx driver software
• VI Logger Lite data-logging
software
Driver Software1
NI-DAQmx
NI-DAQmx
Product
Bus
USB
USB
USB
Input Lines
8 sink
Output Lines
–
8 source
Isolation
Bank
Bank
Signal Levels
11 to 30 V
6 to 30 V
60 VDC
250 VAC/VDC
Output Current per Channel
Connector
USB-9421
USB-9472
USB-9481
–
Screw Terminal, D-Sub
Screw Terminal, D-Sub
Screw Terminal
–
–
0.75 A
2 A (30 VDC)
1 A (60 VDC)
4 Form A Relay
Bank
NI-DAQmx
1For up-to-date information on NI-DAQ, visit ni.com/support/daq/versions.htm.
Table 1. Portable USB DAQ for High-Voltage Digital I/O Selection Guide
Hardware Description
Common Applications
National Instruments USB-9421, USB-9472, and USB-9481 are data The USB-9421, USB-9472, and USB-9481 are ideal for monitoring
acquisition modules with integrated signal conditioning. They and control applications where easy connectivity and portability are
provide plug-and-play connectivity via USB for faster setup and essential, such as:
measurements, offering four or eight digital input or output channels • Portable industrial monitoring and controlling motors, fans,
specifically designed for monitoring and control applications. The
pumps, relays, and limit switches
NI USB-9421 digital input module accepts high-voltage levels • Data logging
between 11 and 30 V for direct connection to 24 V systems. The • Small form-factor applications
NI USB-9472 can source up to 30 V externally powered at 0.75 A of • Embedded OEM applications
current per channel, and the NI USB-9481 uses electromechanical • In-vehicle data acquisition
relays that can switch 2 A at 30 VDC and 1 A at 60 VDC. In addition, • Academic lab use
these modules include channel-to-earth ground isolation for safety,
noise immunity and high common-mode voltage range.
Information for OEM Customers
For information on special configurations and pricing, please
Software Description
visit ni.com/oem.
The USB-9421, USB-9472, and USB-9481 all use NI-DAQmx
high-performance, multithreaded driver software for interactive
configuration and data acquisition on Windows OSs. Use
NI-DAQmx to test channels, generate code, and apply custom
functionality to any of your measurements. All NI data acquisition
devices shipped with NI-DAQmx also include VI Logger Lite
configuration-based data-logging software.
Ordering Information
NI USB-9421
Screw Terminals ........................................................779451-01
D-Sub Connector......................................................779452-01
NI USB-9472
Screw Terminals ........................................................779449-01
D-Sub Connector......................................................779450-01
NI USB-9481 ................................................................779453-01
Accessories
Recommended Accessories
NI 9934 ......................................................................779104-01
The USB-9421, USB-9472, and USB-9481 all have built-in screw-
terminal connectivity, so no additional accessories are required. The
USB-9421 and USB-9472 are also available with D-Sub connector
options that connect to the NI 9934 strain relief accessory, or any
other standard 25-pin D-Sub connector.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S. only) or go to ni.com/oem.
NI Services and Support
NI has the services and support to meet your
needs around the globe and through the
application life cycle – from planning
and development through deployment
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you
access to engineers who speak your language. NI delivers industry-
leading technical support through online knowledge bases, our
applications engineers, and access to 14,000 measurement and
automation professionals within NI Developer Exchange forums.
Find immediate answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of
technical support. Visit ni.com/ssp.
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
SERVICE
NEEDS
Training and Certification
NI training is the fastest, most certain route to productivity with our Hardware Services
products. NI training can shorten your learning curve, save NI Factory Installation Services
development time, and reduce maintenance costs over the NI Factory Installation Services (FIS) is the fastest and easiest way to
application life cycle. We schedule instructor-led courses in cities use your PXI or PXI/SCXI combination systems right out of the box.
worldwide, or we can hold a course at your facility. We also offer a Trained NI technicians install the software and hardware and
professional certification program that identifies individuals who configure the system to your specifications. NI extends the standard
have high levels of skill and knowledge on using NI products. warranty by one year on hardware components (controllers, chassis,
Visit ni.com/training.
modules) purchased with FIS. To use FIS, simply configure your
system online with ni.com/pxiadvisor.
Professional Services
Our Professional Services Team is comprised of NI applications Calibration Services
engineers, NI Consulting Services, and a worldwide National Instruments NI recognizes the need to maintain properly calibrated devices for
Alliance Partner program of more than 600 independent consultants high-accuracy measurements. We provide manual calibration
and integrators. Services procedures, services to recalibrate your products, and automated
range from start-up assistance calibration software specifically designed for use by metrology
to turnkey system integration. laboratories. Visit ni.com/calibration.
Visit ni.com/alliance.
Repair and Extended Warranty
OEM Support
NI provides complete repair services for our products. Express repair
We offer design-in consulting and product integration assistance and advance replacement services are also available. We offer
if you want to use our products for OEM applications. For extended warranties to help you meet project life-cycle requirements.
information about special pricing and services for OEM customers, Visit ni.com/services.
visit ni.com/oem.
ni.com • (800) 813 3693
National Instruments • info@ni.com
© 2005 National Instruments Corporation. All rights reserved. CVI, LabVIEW, Measurement Studio, National Instruments, National Instruments Alliance Partner,
NI, ni.com, NI-DAQ, and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective
companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
相关型号:
USB-9481
Portable USB-Based High-Voltage Digital I/OWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9AB-080-28N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-080-28S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-130-26S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-200-24S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-300-22N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-300-22S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-500-20N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AO-080-28N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AO-080-28S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AO-130-26S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AO-200-24S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
©2020 ICPDF网 联系我们和版权申明