E2023-BB 概述
Light Duty Miniature Toggles 轻型微型切换
E2023-BB 数据手册
通过下载E2023-BB数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Light Duty Miniature Toggles Series E
Distinctive Characteristics
Power and logic level capabilities available to suit varying applications.
High torque bushing prevents rotation and separation from metal
frame during installation.
Stainless steel frame resists corrosion.
Case of heat resistant resin meets UL94V-0 flammability
rating.
Antijamming design protects contact mechanism from
damage if lever is subjected to sharp downward force
or other harsh treatment.
Bias guard achieved by interlocking actuator block
with lever and interior guide; diagonal force on
toggle is not transmitted to actuator block and
misalignment of contacts is prevented.
Higher insulating barriers protect against crossover
in double pole devices.
1,500V dielectric strength between contacts and case
is accomplished by clinching the frame away from the terminals.
Epoxy sealed terminals prevent entry of solder flux and other contaminants.
Actual Size
2-06
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Light Duty Miniature Toggles Series E
General Specifications
Electrical Capacity (Resistive Load)
Power Level (No Code or P):
Logic Level (code G or PG):
3A @ 125V AC for silver contacts
0.4VA maximum @ 28V AC/DC maximum for gold contacts
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance:
10 milliohms maximum for silver;
20 milliohms maximum for gold
Insulation Resistance:
Dielectric Strength:
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum
20,000 operations minimum for silver;
50,000 operations minimum for gold
25°
Mechanical Life:
Electrical Life:
Angle of Throw:
Materials & Finishes
Toggle:
Brass with chrome plating
Brass with nickel plating
Bushing:
Frame:
Stainless steel
Case:
Melamine phenolic resin (UL94V-0)
Copper with silver or gold plating
Silver with silver or gold plating
Copper with silver or gold plating
Movable Contacts:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temp Range:
Humidity:
–10°C through +70°C (+14°F through +158°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Shock:
Installation
Mounting Torque:
Soldering Time & Temp:
1.47Nm (13 lb•in) for double nut; .686Nm (6 lb•in) for single nut
Circuits 2 & 5 Manual Soldering: 3 seconds maximum @ 350°C maximum
Wave Solder: 5 seconds maximum @ 270°C maximum.
Circuits 1, 3, 8, & 9 Manual Soldering: 4 seconds maximum @ 410°C maximum
Wave Solder: See Profile A in Supplement section.
Note: On circuits 1, 3, 8, & 9 levers must be in center or off position while soldering.
Standards & Certifications
Flammability Standards:
UL Recognized:
UL94V-0 case
All single & double pole models recognized at 3A @ 125V AC;
UL File No. WOYR2.E44145;
add “/U” to end of part number to order UL mark on switch.
Single pole, double throw solder lug & PC models certified at 3A @ 125V AC;
double pole, double throw PC models certified at 3A @ 125V AC;
CSA File No. 023535-0-000;
CSA Certified:
add “/C” to end of part number to order CSA mark on switch.
2-06
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Light Duty Miniature Toggles Series E
TYPICAL SWITCH ORDERING EXAMPLE
E20 2
2
P
C
G
POLES
CONTACTS, RATINGS, & TERMINALS
COLORS
Black
SPST
SPDT
No
Silver Contacts; Solder Lug Terminals;
A
B
C
E
1
2
Code 3A @ 125V AC
White
Red
DPST
DPDT
Gold Contacts; Solder Lug Terminals
0.4VA max @ 28V AC/DC max
G
P
Yellow
Green
Blue
Silver Contacts; Straight PC Terminals;
3A @ 125V AC
F
G
Gold Contacts; Straight PC Terminals
0.4VA max @ 28V AC/DC max
PG
CIRCUITS
OPTIONAL CAPS
1
ON NONE OFF
ON NONE ON
B
C
Bat Lever Cap
2
3
5
8
9
Bat Lever Conical Cap
ON
OFF
ON
ON NONE (ON)
(ON)
ON
OFF
OFF
(ON)
(ON)
( ) = Momentary
IMPORTANT:
Switches are supplied without UL
& CSA marking unless specified.
Specific models & ratings noted
on General Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
E2022P-CG
Blue Bat Lever Conical Cap
DPDT
ON-NONE-ON Circuit
Silver Contacts & Straight PC
Terminals with 3-Amp Rating
2-06
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Light Duty Miniature Toggles Series E
POLES & CIRCUITS
Toggle Position
( ) = Momentary
Connected Terminals
Throw & Schematics
Down
Center
Up
Down
Center
Up
Note: Terminal numbers are
not actually on the switch.
Keyway
Keyway
Pole
Model
E2011
2 (COM)
SP
ON
NONE
OFF
2-3
OPEN
OPEN
OPEN
2-1
SPST
3
E2012
E2013
E2015
E2018
E2019
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
ON
ON
(ON)
(ON)
(ON)
2 (COM)
SP
DP
DP
2-3
SPDT
1
3
OFF
2
(COM)
3
5
E2021
ON
NONE
OFF
2-3 5-6
2-3 5-6
OPEN
OPEN
OPEN
DPST
DPDT
6
E2022
E2023
E2025
E2028
E2029
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
ON
ON
(ON)
(ON)
(ON)
2
(COM)
5
2-1 5-4
6
1
3
4
OFF
CONTACT MATERIALS, RATINGS, & TERMINALS
(2.0)
.079
No
Solder Lug
Silver Contacts
Epoxy Seal
Code
Power Level
3A @ 125V AC
(2.0)
.079
(4.0)
.157
(1.1)
.043
Thk (0.7) (0.5) Com
.028 .020
Solder Lug
Gold Contacts
G
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Wiring Specifications
The .043” x .079” (1.1mm x 2.0mm) oblong
terminal hole accommodates one solid 18-gauge
wire or two solid or stranded 20-gauge wires.
Complete explanation of operating range in Supplement section.
Straight PC
Silver Contacts
P
Epoxy Seal
(6.4)
.252
(4.3)
.169
Power Level
3A @ 125V AC
(1.2)
.047
Thk (0.7) (0.5) Com
.028 .020
PCB Footprints
Straight PC
Gold Contacts
PG
Logic Level
(4.7)
.185
0.4VA maximum @ 28V AC/DC maximum
3
2
1
3
6
5
4
(3.9) Typ
.154
(3.9) Typ
.154
2
1
(1.8) Dia Typ
.071
(1.8) Dia Typ
.071
Double Pole
Complete explanation of operating range in Supplement section.
Single Pole
2-06
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Light Duty Miniature Toggles Series E
OPTIONAL CAPS & COLORS
AT415
Bat Lever Cap
AT444
Bat Lever Conical Cap
B
C
Cap Colors Available:
Cap Lever Material
Polyethylene
Cap Lever Material
Polyethylene
A
E
B
F
C
Black
White
Green
Red
25°
25°
(5.0) Dia
.197
(4.8) Dia
.189
(12.0)
.472
(11.5)
.452
G
(13.5)
.532
Yellow
Blue
(13.1)
.516
25°
(2.8) Dia
.110
(0.8)
.031
M6 P0.75
(10.5)
.413
(2.5)
.098
(0.7)
This standard lever is com-
bined with a metric bushing.
The E Series toggles have a bat
lever .413” (10.5mm) long.
.028
(7.0) Dia
.276
(7.9)
.311
TYPICAL SWITCH DIMENSIONS
Solder Lug
Single Pole
(1.1) x (2.0) Typ
.043 x .079
(0.7) Typ
Keyway
M6 P0.75
.028
3
(3.9) Typ
.154
2
1
(11.0)
.433
25°
(0.5)
.020
(4.0) Typ
.157
(2.8) Dia
.110
(0.7)
(4.5)
.177
.028
(10.5)
.413
(14.6)
.575
(7.2)
.283
(7.0)
.276
(2.0)
.079
E2012
E2011 model does not have terminal 1.
Solder Lug
Double Pole
(1.1) x (2.0) Typ
.043 x .079
(0.7) Typ
Keyway
M6 P0.75
.028
6
5
4
3
2
1
(3.9) Typ
.154
(11.0)
.433
25°
(0.5)
.020
(4.0) Typ
.157
(2.8) Dia
.110
(0.7)
.028
(14.6)
.575
(4.5)
.177
(2.0) Typ
.079
(7.2)
.283
(4.7)
.185
(11.7)
.461
(10.5)
.413
E2022
E2021 model does not have terminals 1 & 4.
2-06
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Light Duty Miniature Toggles Series E
STANDARD HARDWARE
AT513M Metric
Hexagon Nut
AT507M Metric
Locking Ring
AT509
Lockwasher
Standard Hardware
2 AT513M Metric Hexagon Nuts
1 AT507M Metric Locking Ring
1 AT509 Internal Tooth Lockwasher
Material:
Brass with
Nickel Plating
Material:
Steel with Zinc/Chromate
Material:
Steel with Zinc/Chromate
(6.0) Dia
.236
M6 P0.75
(8.0)
.315
(12.0) Dia
.472
(6.4) Dia
.252
(10.2) Dia
.402
(2.0)
.079
Face Nut
(5.5)
.217
Locking Ring
Lockwasher
Lock Nut
(1.7)
.067
(0.8)
.031
(9.0)
.354
(1.5)
.059
(0.5)
.020
Optional hardware available. See Accessories & Hardware section.
Panel Thicknesses & Panel Cutouts
With Standard Hardware
Without Locking Ring
Maximum Effective Panel Thickness:
.087” (2.2mm)
Maximum Effective Panel Thickness:
.118” (3.0mm)
(6.35) Dia
.250
(5.6)
.220
(6.5)
.256
(6.5) Dia
.256
(6.35) Dia
.250
(0.6)
.024
(2.2) Dia
.087
Without Bottom Hex Nut
Without Locking Ring & Bottom Hex Nut
Maximum Effective Panel Thickness:
.154” (3.9mm)
Maximum Effective Panel Thickness:
.185” (4.7mm)
OPTIONAL SPLASHPROOF BOOT
AT428M (Metric)
Boot for Bat Toggle
(4.6) Dia
.181
(6.7) Dia
.264
Material: Silicone Rubber
(9.8)
.386
(10.8)
.425
(11.3)
.445
(14.3)
.563
(2.0) (2.5)
~
.079 .098
(1.57)
.062
2-06
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
E2023-BB 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
E2023-BC | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-BE | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-BF | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-BG | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-CA | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-CB | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-CC | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-CE | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-CF | NKK | Light Duty Miniature Toggles | 获取价格 | |
E2023-CG | NKK | Light Duty Miniature Toggles | 获取价格 |
E2023-BB 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6