FR01FC16PB-S [NKK]
10mm DIP Rotaries; 10毫米DIP旋转开关![FR01FC16PB-S](http://pdffile.icpdf.com/pdf1/p00127/img/icpdf/FR01F_700643_icpdf.jpg)
型号: | FR01FC16PB-S |
厂家: | ![]() |
描述: | 10mm DIP Rotaries |
文件: | 总7页 (文件大小:268K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
10mm DIP Rotaries Series FR01
Distinctive Characteristics
Compact dimensions and low profile allow high density mounting
and close stacking of PC boards.
Highly visible legends and choice of screwdriver, shaft
or dial actuators with arrow position indication
provide trouble-free code setting. Knob
actuator also available.
Real or complement code setting
identified by color-keyed actuator.
Detent mechanism gives crisp,
positive action for accurate
switch setting.
Crimped terminals ensure secure PC mounting
and prevent dislodging during soldering.
Cam activated movable contact and gold contacts assure
contact reliability and continuity.
Surface mount model with screwdriver actuation available and
shown in the surface mount section.
Actual Size
Contact factory for custom models with .200” (5.08 mm) terminal
spacing.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
10mm DIP Rotaries Series FR01
General Specifications
Electrical Capacity (Resistive Load)
Switching Rating:
100mA @ 5V DC
Nonswitching Rating:
100mA @ 50V DC
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
100 milliohms maximum for circuit; 30 milliohms maximum for contact point
1,000 megohms minimum @ 250V DC
250V AC minimum for 1 minute minimum
10,000 detent operations minimum
Electrical Life:
10,000 detent operations minimum
Notes: A detent operation is one actuator position operation or stepping.
A cycle is one 360° rotation. 10,000 detent operations equal 625
cycles for hexadecimal devices or 1,000 cycles for decimal devices.
Metal Shaft: 0.009Nm for decimal devices; 0.011Nm for hexadecimal devices
All other Actuator types: 0.008Nm for decimal devices; 0.01Nm for hexadecimal devices
Shorting (Avoid possible false signal by turning off power before switching.)
Nominal Operating Torque:
Contact Timing:
Materials & Finishes
Actuators:
Screwdriver and Plastic Shaft - Glass fiber reinforced polyamide (UL94V-0);
Dial - Polyoxymethylene; Metal Shaft - Brass with nickel plating
Brass with nickel plating (for Metal Shaft model)
Glass fiber reinforced PBT (for Metal Shaft model)
Glass fiber reinforced polyamide (UL94V-0)
Copper alloy with gold plating
Bushing :
Outer Case:
Housing & Base:
Movable Contacts:
Stationary Contacts:
Terminals:
Phosphor bronze with gold plating
Phosphor bronze with gold plating
Terminal Cover:
Bracket:
Polyamide (Right angle model only)
Phospher bronze with tin plating (for Metal Shaft model)
Environmental Data
Operating Temperature Range:
Humidity:
–25°C through +85°C (–13°F through +185°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 5 minutes; 3 right angled directions for 2 hours
Shock:
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering:
Wave Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Cleaning:
These devices are not process sealed. Hand clean locally using alcohol based solution.
Custom process sealed version available; contact factory.
Standards & Certifications
Flammability Standards:
UL Recognition
UL94V-0 rated actuator, housing and base
The FR01 Series rotaries have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current circuit.
When used as intended, the results do not produce hazardous energy.
or CSA Certification:
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
10mm DIP Rotaries Series FR01
TYPICAL SWITCH ORDERING EXAMPLE
S
FR 01 K R 16 P
MOUNTING
CIRCUITS
PC TERMINALS
PACKAGING
01 Through-hole
Real Coded
(Orange Actuator)
P
Straight
Stick-Tubes:
R
C
FR01F, FR01K, FR01S
50 Pieces/Stick
FR01A
H
Right Angle
S
Complement Coded
(Yellow Actuator)
25 Pieces/Stick
Color not applicable
to Actuator A
ACTUATION
F
Screwdriver
Plastic Shaft
POSITIONS
BRACKET
K
10 Decimal
16 Hexadecimal
B
With Bracket
Dial (for Straight
Terminals only)
S
For Actuator A only
Metal Shaft (for
Optional Knobs)
A
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
FR01KR16P-S
Plastic Shaft
Hexadecimal Positions
Real Coded
Packaged in Stick-Tube
Straight PC Terminals
MOUNTING
01
F
Through-hole
Screwdriver
ACTUATION
AT4180
Optional Snap-on Knob
(2.1)
.083
(0.8)
.031
Adjusted with
a flat tipped
screwdriver
Polyamide
(6.7)
.264
(9.6)
.378
(4.0)
.157
Black knob with
transparent flange
(1.1)
.043
(0.8)
.031
Actuators are fully rotational either clockwise or
counterclockwise.
Actuator Colors: Orange for real coded devices;
Yellow for complement coded devices.
Install knob before mounting on PCB for right angle type; it should
not be removed once mounted. When mounting, align slit in knob
with arrowhead on actuator.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
10mm DIP Rotaries Series FR01
ACTUATION
K
S
A
Dial
Metal Shaft
Plastic Shaft
Adjusted by hand
or with flat tipped
screwdriver
Knob options
illustrated below
with color choices
Adjusted by hand
or with flat tipped
screwdriver
Actuators are fully rotational and operate either clockwise or counterclockwise.
Colors for Actuators K and S: Orange for real coded devices; Yellow for complement coded devices
Mounting hardware is available if needed for models with Actuator A:
Hexagon Nut AT513M, Locking Ring AT515M, and Lockwasher AT509; all are shown in the Accessories and Hardware section.
OPTIONAL KNOBS FOR METAL SHAFT
AT433
Plain Black
AT4103 Small
Color Tipped
AT4104 Large
Color Tipped
(18.0) Dia
.709
(11.0) Dia
.433
(16.0) Dia
.630
(9.5) Dia
.374
(19.0) Dia
.748
(11.0) Dia
.433
Material:
Polyester Base:
Black
Polyester Base:
Black
Polyacetal
(15.8)
.622
Polyamide Tip
Colors:
(14.3)
.563
Polyamide Tip
Colors:
(13.0)
.512
(9.5)
.374
(9.5)
.374
(9.5)
.374
Color:
Black
A, B, C, E, F, G, H
A, B, C, E, F, G, H
(0.5)
.020
(0.5)
.020
(0.5)
.020
Knob Orientation: When installed with shaft flat rotated 180° from bushing flat as shown in “Typical Switch Dimensions,”
white line on cap points to Actuator Position 0 noted in truth tables below.
Color Codes:
A Black
B White
C Red
E Yellow
F Green
G Blue
H Gray
TRUTH TABLES (CIRCUITS & POSITIONS)
Actuator Position
16
10
Decimal
Hexadecimal
x = ON
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Terminal No. (Output)
1
2
4
8
1
R
Real Coded
Model Numbers:
FR01FR, FR01KR,
FR01SR, FR01AR
C
Complement Coded
Model Numbers:
FR01FC, FR01KC
FR01SC, FR01AC
2
4
8
Terminal numbers are actually on the switch.
Above sequence shown for clockwise rotation.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
10mm DIP Rotaries Series FR01
TYPICAL SWITCH DIMENSIONS
P
Straight PC • Screwdriver
(2.1)
.083
(0.2) Typ
.008
(0.2)
.008
(0.2)
.008
(2.54) Typ
.100
C
L
(2.54) Typ
.100
0
8
4
2
1
1
2
4
8
(10.0)
(10.0)
.394
(7.62)
.300
.394
5
8
C
(7.62)
.300
C
(3.3)
.130
(3.8) Dia
.150
(3.8) Dia
.150
(1.27)
.050
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
(3.8)
.150
(0.5) Typ
.020
(10.0)
.394
(10.0)
.394
FR01FC10P
Decimal
Hexadecimal
H
Right Angle PC • Screwdriver
(3.8)
.150
(2.75)
.108
C
L
(2.54) Typ
.100
5
8
1
2
4
8
(10.0)
.394
(10.0)
.394
C
2
(2.1)
.083
C
1
4 8
0
(2.54)
.100
(0.2)
.008
(0.2)
.008
(0.8 ~ 1.0) Dia Typ
(1.27)
.050
(0.2) Typ (3.3)
.008
.031 ~ .039
.130
(3.8) Dia
.150
(3.8) Dia
.150
(2.54)
.100
(0.5) Typ
.020
(10.0)
.394
(10.0)
.394
(3.25)
.128
(2.54) Typ
.100
FR01FR10H
Decimal
Hexadecimal
P
Straight PC • Plastic Shaft
(0.2) Typ
.008
(2.1)
.083
(0.2)
.008
(0.2)
.008
(2.54) Typ
.100
C
L
(2.54) Typ
.100
0
8
4
2
1
1
2
4
8
(7.62)
.300
(10.0)
.394
(10.0)
.394
5
8
C
(7.62)
.300
(3.8)
.150
C
(3.3)
.130
(1.27)
.050
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
(7.0) (3.8)
.276 .150
(10.0)
.394
(10.0)
.394
(0.5) Typ
.020
FR01KR16P
Decimal
Hexadecimal
H
Right Angle PC • Plastic Shaft
(3.8)
.150
(2.75)
.108
C
L
(2.54) Typ
.100
5
8
1
2
4
8
(10.0)
.394
(10.0)
.394
(2.1)
C
C
1
2
4
8
0
.083
(3.8)
.150
(2.54)
.100
(0.2)
.008
(0.2)
.008
(0.8 ~ 1.0) Dia Typ
(1.27)
.050
(0.2) Typ (3.3)
.008
.031 ~ .039
.130
(2.54)
.100
(0.5) Typ
.020
(7.0)
.276
(3.25)
.128
(10.0)
.394
(10.0)
.394
(2.54) Typ
.100
FR01KC16H
Decimal
Hexadecimal
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
10mm DIP Rotaries Series FR01
TYPICAL SWITCH DIMENSIONS
P
Straight PC • Dial
(2.1)
(3.0)
.118
C
L
.083
(0.2)
.008
(2.54) Typ
.100
(2.54) Typ
.100
(0.2) Typ
.008
1
2
4
8
8
4
2
1
(10.0)
.394
(9.8) Dia
.386
(7.62)
.300
(7.62)
.300
C
C
(1.27)
.050
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
(3.4)
.134
(10.0)
.394
(7.2)
.284
(3.3)
.130
(0.5) Typ
.020
FR01SR10P
Decimal
Hexadecimal
P
Straight PC • Metal Shaft
(0.4) Typ
.016
(3.1) Dia
.122
(0.6) Typ
.024
(2.54) Typ
.100
(2.54) Typ
.100
C
L
Flat
1
2
4
8
8
4
2
1
(7.62)
.300
(11.0)
.433
(7.62)
.300
(0.2) Typ
.008
C
C
(2.28)
.090
(1.27) (0.8 ~ 1.0) Dia Typ
.050 .031 ~ .039
(12.7)
.500
M6 P0.75
(0.5) Typ
.020
(11.6)
.457
(13.1)
.516
(10.0)
.394
(12.7)
.500
(6.1)
.240
(11.95)
.470
(3.3)
.130
FR01AR10PB
Shown in Position 0 with shaft flat rotated 180° from bushing flat
H
Right Angle PC • Metal Shaft
(3.1) Dia
.122
(0.4) Typ
.016
(2.54) Typ
.100
C
L
M6 P0.75
(7.62)
.300
(11.0)
.433
C
2
8
1
2
4
(5.5)
.217
1
4
8
C
(2.28)
.090
Flat
(1.27)
.050
(2.54)
.100
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
(0.5) Typ
.020
(2.54) Typ
.100
(0.2) Typ
.008
(2.54)
.100
(3.3)
.130
(0.6) Typ
.024
(3.03)
.119
(6.1)
.240
(12.7)
.500
(11.6)
.457
(13.1)
.516
(7.62)
.300
(13.9)
.547
(12.7)
.500
(10.0)
.394
FR01AC16HB
Shown in Position 0 with shaft flat rotated 180° from bushing flat
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
10mm DIP Rotaries Series FR01
PACKAGING
S
Stick-Tube
FR01F, FR01K & FR01S
Each stick-tube contains 50 switches.
Switches must be ordered in 50-piece increments.
FR01A
Each stick-tube contains 25 switches.
Switches must be ordered in 25-piece increments.
Note: Transport and storage temperatures should
not exceed 50°C (122°F). Store stick tubes on flat
surface.
FR01F with Screwdriver Actuation & Straight PC
FR01K with Plastic Shaft & Right Angle PC
(16.4)
.646
(15.7)
.618
(15.4)
.606
(530.0)
20.866
(16.0)
.630
(540.0)
21.260
FR01S with Dial Actuation & Straight PC
(13.9)
.547
(12.3)
.484
(528.0)
20.787
FR01A with Metal Shaft & Straight PC
FR01A with Metal Shaft & Right Angle PC
(18.2)
.717
(35.5)
1.398
(390.0)
15.354
(33.6)
1.323
(390.0)
15.354
(13.1)
.516
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
05-08
相关型号:
©2020 ICPDF网 联系我们和版权申明