JWMW12BB1 [NKK]
Internationally Approved TV Rated Rockers; 国际认可的电视额定摇椅
| 型号： | JWMW12BB1 |
| 厂家： | 
NIHON KAIHEIKI INDUSTRY CO. LTD. |
| 描述： | Internationally Approved TV Rated Rockers |
| 文件： | 总8页 (文件大小：286K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Internationally Approved TV Rated Rockers Series JW
Distinctive Characteristics
Industry’s first molded rocker with TV rating. Designed to
handle large inrush current. JWM models certified for TV-5
rating and JWL models for TV-8 rating.
Special 5A @ 72V DC rating for JWL models to use
in worldwide telecommunication equipment for
power distribution applications.
Prominent external insulating barriers increase
insulation resistance and dielectric strength.
Constructed for dust resistance with interior
cover between actuator and contact area.
Specially designed to break light contact welds.
JWMW panel seal version meets IP67 of IEC60529
Standards (similar to NEMA 4 and 6).
Terminals are molded in and epoxy sealed to lock out flux, dust,
and other contaminants.
Actual Size JWM
Housing and case of heat resistant resin meet UL 94V-0
standard.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved TV Rated Rockers Series JW
General Specifications
Electrical Capacity (Resistive Load)
Power Level:
10A @ 125/250V AC for JWM & JWMW models; 10A @ 30V DC for JWMW;
16A @ 125/250V AC for JWL models; 5A @ 72V DC for telecommunication applications
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
10 milliohms maximum for JWM & JWMW; 20 milliohms maximum for JWL
1,000 megohms minimum @ 500V DC
2,000V AC minimum between contacts for 1 minute minimum;
4,000V AC minimum between contacts & case for 1 minute minimum
25,000 operations minimum
Mechanical Life:
Electrical Life:
25,000 operations minimum
Nominal Operating Force:
JWM & JWMW Single Pole 3.92N & Double Pole 7.84N
JWL Single Pole 5.00N & Double Pole 10.00N
26°
Angle of Throw:
Materials & Finishes
Housing/Frame & Barrier:
Interior Seal for JWM & JWL:
Case/Base:
Polyamide (UL94V-0)
Polyphenylene sulfide
Melamine (UL94V-0)
Movable Contacts:
Stationary Contacts:
Terminals:
Silver alloy
Silver alloy
Brass with silver plating
Environmental Data
Operating Temp Range:
–25°C through +70°C (–13°F through +158°F) for JWM & JWL;
–25°C through +85°C (–13°F through +185°F) for panel seal JWMW model
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Humidity:
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
Shock:
Sealing:
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
IP67 of IEC60529 standard for panel seal JWMW model; dust resistant inner seal for others.
Installation
Soldering Time & Temp:
Manual Soldering: See Profile A in Supplement section.
Standards & Certifications
Flammability Standards:
TV Ratings for UL & CSA:
UL File No. WOYR2.E44145
CSA File No. 023535-0-000
UL94V-0 for housing/frame & case/base of JWL, JWM, & JWMW models
JWM & JWMW (TV-5) Overload Test @ 120V AC for 50 operations:
Steady State Current (rms) 7.5A; Minimum Inrush Current (peak) 111A
JWM & JWMW (TV-5) Endurance Test @ 120V AC for 25,000 operations:
Steady State Current (rms) 5A; Minimum Inrush Current (peak) 78A
JWL (TV-8) Overload Test @ 120V AC for 50 operations:
Steady State Current (rms) 12A; Minimum Inrush Current (peak) 163A
JWL (TV-8) Endurance Test @ 120V AC for 25,000 operations:
Steady State Current (rms) 8A; Minimum Inrush Current (peak) 117A
JWM & JWMW models recognized at 10A @ 250V AC & JWMW at 10A @ 30V DC;
JWL models recognized at 16A @ 250V AC; 5A @ 72V DC (specify “/U-DC” after part
number to request UL rating be marked on DC rated switches);
UL & C-UL Recognized:
R
UL File No. WOYR2.E44145; C-UL File No. WOYR8.E44145.
CSA Certified:
JWM & JWMW models certified at 10A @ 250V AC;
JWL models certified at 16A @ 250V AC; CSA File No. 023535-0-000
JWM models approved at steady state 5A, inrush 80A, resistive 10A, &
motor load 6A all at 250V AC; VDE License No. 115637; JWL models approved at steady state 8A,
inrush 128A, resistive 16A, & motor load 8A all at 250V AC; VDE License No. 115637.
Note: JWM & JWL Double Pole, Single Throw models approved only with the
international on-off symbols on the actuator.
VDE Approved:
V
D
E
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved TV Rated Rockers Series JW
TYPICAL SWITCH ORDERING EXAMPLE
JW L 2 1 R C 2 A
RATINGS
BARRIER TYPES
No Barrier
HOUSING COLORS
TV-5 Rated
10A @ 125/250V AC
R
B
A
B
Black
Ivory
Gray
M
MW
L
With Barrier
Panel Seal TV-5 Rated
10A @ 125/250V AC
Note: JWMW combines
with code R only.
H
Note: JWMW avail-
able with black only.
TV-8 Rated
16A @ 125/250V AC
CAP COLORS
BARRIER COLORS
A
B
Black
Ivory
Red
POLES
A
B
Black
Ivory
Gray
SPST
SPDT
1
C
H
* DPST
DPDT
H
Gray
2
Note: JWMW available
with black or red only.
* DPST must have interna-
tional ON-OFF symbols
for VDE approval.
INSCRIPTION
ORIENTATION
IMPORTANT:
Standard markings: TV Rating, UL,
C-UL, CSA, & VDE.
Specific models & ratings for
international approvals noted on
General Specifications page.
CIRCUITS
No
No Inscription
Code
1
2
ON NONE OFF
ON NONE ON
1
2
Horizontal
Vertical
These are inscriptions for
Single Throw models only.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
JWL21RC2A
Red Rocker Cap
with International ON-OFF Symbols
in Vertical Orientation
Black Housing
DPST
ON-NONE-OFF Circuit
TV-8 Rated
16A @ 125/250V AC
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved TV Rated Rockers Series JW
RATINGS
TV-5 Rated
Power Level
Power Level
Power Level
10A @ 125/250V AC
10A @ 125/250V AC
16A @ 125/250V AC
M
MW
L
Panel Seal TV-5 Rated
TV-8 Rated
POLES & CIRCUITS
Rocker Position
Connected Terminals
Throw & Schematics
Down
Center
Up
Down
Center
Up
Note: Terminal numbers are not actually
on the switch. Actuator positions oriented
with switch part number facing front.
Pole
Model
JWM11
JWMW11
JWL11
1 (COM)
SP
SP
DP
DP
ON
ON
ON
ON
NONE
NONE
NONE
NONE
OFF
ON
OFF
ON
1-1b
1-1b
OPEN
OPEN
OPEN
OPEN
OPEN
1-1a
SPST
1b
JWM12
JWMW12
JWL12
1 (COM)
SPDT
1a
1b
1
(COM)
2
JWM21
JWMW21
JWL21
1-1b
2-2b
OPEN
DPST
DPDT
1b
1
2b
(COM)
1b 2a
2
JWM22
JWMW22
JWL22
1-1b
2-2b
1-1a
2-2a
1a
2b
BARRIER TYPES & COLORS
R
B
No Barrier
With Barrier
Flange/Housing Material: Polyamide
Finish: Matte
Barrier Material: Polyamide
Finish: Matte
JWM
JWL
JWM
JWL
Barrier type designates that either AT217 (for JWM) or
AT218 (for JWL) is factory assembled.
Dimensions for barriers are shown in the Accessories section.
No-barrier type has a flat flange
which is an integral part of the switch.
JWMW panel seal device has exterior seal of acrylonitrile
butadiene rubber covering the flange.
Barrier Colors
Available:
A
B
H
Black
Ivory
Gray
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved TV Rated Rockers Series JW
CAP COLORS
Rocker cap is an integral part of the switch and not available separately.
JWMW available with black or red caps only.
Cap Material:
Polyphenelene Oxide
Finish: Matte
Cap Colors
Available:
A
B
C
H
Black
Ivory
Red
Gray
INSCRIPTIONS
Inscription for
Horizontal Mounting
Inscription for
Vertical Mounting
No Code
1
2
No Inscription
The IEC symbols for On-Off are supplied with Single Throw models only.
Orientation of inscription must be selected.
Inscription Colors: Black ink on Ivory or Gray cap. White ink on Black or Red cap.
Contact factory for other inscriptions.
DPST models without inscriptions
do not have VDE approval.
HOUSING
Material: Polyamide
Finish: Matte
A
B
H
Colors Available:
Black
Ivory
Gray
JWMW panel seal models available in black housing only.
TERMINALS
Solder Lug/.110” (2.8mm) Quick Connect
JWM & JWMW
Solder Lug/.187” (4.75mm) Quick Connect
JWL
(3.2)
Epoxy Seal
(7.5)
.295
Epoxy Seal
(7.5)
.126
.295
(1.5) R
.059
(0.6) R
.024
(1.6)
.063
Thk = (0.5)
.020
(2.8)
.110
(0.65) R
.026
(4.75)
.187
Thk = (0.8)
.031
This switch assembly with connectors is not UL, C-UL, CSA, or VDE approved.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved TV Rated Rockers Series JW
TYPICAL SWITCH DIMENSIONS
TV-5 No Barrier • 10 Amp
Single & Double Pole
(15.0)
.591
(6.0)
.236
Part No.
2b
2
1b
1
(7.7) Typ
.303
(27.0)
1.063
(22.6)
(19.6)
.772
26°
(16.4)
.890
COM
2a
COM
1a
.646
(0.5) Typ
.020
(2.8) Typ
.110
(6.2)
.244
(15.4)
.606
(13.6)
.535
(2.0)
.079
(18.0)
.709
(21.5)
.846
(7.5)
.295
JWM11RC1A
TV-5 With Barrier • 10 Amp
Single & Double Pole
(15.0)
.591
Part No.
2b
2
1b
1
(7.7) Typ
.303
(22.6)
.890
(25.0)
.984
(30.0)
1.181
(19.6)
.772
COM
2a
COM
1a
(0.5) Typ
.020
(2.8) Typ
.110
(13.6)
.535
(6.2)
.244
(15.4)
.606
(18.0)
.709
(7.2)
.283
(18.9)
.744
(7.5)
.295
(22.2)
.874
JWM11BCA-H
Panel Seal • TV-5 No Barrier • 10 Amp
Single & Double Pole
(7.0)
.276
(15.0)
.591
Part No.
2b
2
1b
1
(7.7) Typ
.303
(22.6)
(29.6)
1.165
(19.6)
.772
26°
.890
COM
2a
COM
1a
(16.4)
.646
(0.5) Typ
.020
(2.8) Typ
.110
(3.0)
.118
(6.2)
.244
(13.6)
.535
(21.5)
.846
(7.5)
.295
(21.0)
.827
(15.4)
.606
JWMW22RCA
Single pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.
PANEL CUTOUTS FOR JWM MODELS
Panel Thickness Range
Without Barrier (JWM & JWMW):
.039” ~ .157” (1.0mm ~ 4.0mm)
(25.0)
.984
(24.0)
.945
JWM
JWMW
With Barrier (JWM):
.024” ~ .126” (0.6mm ~ 3.2mm)
(15.4)
.606
(15.4)
.606
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved TV Rated Rockers Series JW
TYPICAL SWITCH DIMENSIONS
TV-8 No Barrier • 16 Amp
Single & Double Pole
(7.0)
.276
(20.0)
.787
Part No.
2b
2
1b
1
(9.8) Typ
.386
(28.0)
1.102
(32.0)
1.260
(24.4)
.961
26°
(20.2)
COM
2a
COM
1a
.795
(0.8) Typ
.031
(4.75) Typ
.187
(2.0)
.079
(17.6)
.693
(9.0)
.354
(20.5)
.807
(23.0)
.906
(24.0)
.945
(7.5)
.295
JWL21RC2A
Single pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.
TV-8 With Barrier • 16 Amp
Single & Double Pole
(20.0)
.787
Part No.
2b
2
1b
1
(9.8) Typ
.386
(24.4)
.961
(35.0)
1.378
(29.0)
1.142
(28.0)
1.102
COM
2a
COM
1a
(17.6)
.693
(0.8) Typ
.031
(4.75) Typ
.187
(23.0)
.906
(9.0)
.354
(27.2)
1.071
(8.15)
.321
(21.4)
.843
(7.5)
.295
(20.5)
.807
JWL11BCA-H
Single pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.
PANEL CUTOUT FOR JWL MODELS
Without Barrier:
.039” ~ .157” (1.0mm ~ 4.0mm)
(29.5)
1.161
Panel Thickness Range
With Barrier:
.024” ~ .126” (0.6mm ~ 3.2mm)
(20.5)
.807
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved TV Rated Rockers Series JW
OPTIONAL DUST COVER
AT4126
Dust Cover for JWL Rocker
Lid: Clear Polyvinyl Chloride
Base: Black Polyamide
Recommended Temperature Range:
–10° ~ +70°C (+14°F ~ +158°F)
Loses pliability below 0°C (+32°F)
Recommended Panel Thickness:
.031” ~ .134” (0.8mm ~ 3.4mm)
(42.0)
1.654
(2.6)
.102
(22.2)
.874
(8.6)
.339
(33.0)
1.299
Top
Side
Bottom
Switch
Groove
Assembly Instructions:
(1) Insert bottom of switch through the base until
Lid
Base
the tabs lock into place.
(2) Snap the switch into the panel.
(3) Seat the lid into the grooves of the base.
Groove
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
相关型号：
©2020 ICPDF网 联系我们和版权申明