KP0115ACBKG036CF-1FJB [NKK]
Miniature Audio/Video Pushbuttons; 微型音频/视频按钮开关型号: | KP0115ACBKG036CF-1FJB |
厂家: | NIHON KAIHEIKI INDUSTRY CO. LTD. |
描述: | Miniature Audio/Video Pushbuttons |
文件: | 总10页 (文件大小:294K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series KP
Miniature Audio/Video Pushbuttons
General Specifications
Electrical Capacity (Resistive Load)
Low Level:
100mA maximum @ 12V DC
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
200 milliohms maximum
100 megohms minimum @ 250V DC
1,000V AC minimum between contacts for 1 minute minimum
1,500V AC minimum between contacts & case for 1 minute minimum
5,000,000 operations minimum;
D
Mechanical Life:
1,000,000 operations minimum for custom Rectangular Switch/Cap Assembly (at center of cap)
5,000,000 operations minimum
Electrical Life:
Nominal Operating Force:
KP01: 1.9N maximum for Tactile & Nontactile models (at center of cap)
KP02: 1.6N maximum for Tactile, Nontactile & Tactile/Audible models (at center of cap)
KP01: Pretravel .122” (3.1mm); Overtravel .055” (1.4mm); Total Travel .177” (4.5mm)
KP02: Pretravel .091” (2.3mm); Overtravel .047” (1.2mm); Total Travel .138” (3.5mm)
Travel:
Materials & Finishes
Plunger/Upper Housing:
Lower Housing:
Polyacetal
Glass fiber reinforced PBT (UL94V-0)
Stainless steel with gold plating
Gold over copper alloy
Brass with tin plating
Movable Contact:
Stationary Contacts:
Switch Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
–25°C through +50°C (–13°F through +122°F)
90-95% humidity for 240 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
51G (500m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
2
Shock:
Installation
Cap Installation Force :
50.0N maximum downward force on actuator
PCB Processing
Soldering:
Wave Soldering. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Cleaning:
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards:
UL94V-0 lower housing
The KP Series pushbuttons have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
D36
www.nkk.com
Miniature Audio/Video Pushbuttons
Series KP
Distinctive Characteristics
KP series offers a complete switch solution for all broadcast panel needs,
including home keys and the custom rectangular switch/cap assembly.
Distinct, long total travel of .177” (4.5mm) for KP01 or shorter stroke
of .138 (3.5mm) for KP02.
Available with super bright red/green bicolor LED and
RGB LEDs. The RGB LED full color spectrum in a switch
package provides unlimited color combinations.
D
Specially designed snap-in standoff for simple and
secure PC board mounting and alignment.
Unique actuation guide gives positive indication
of circuit transfer as well as smooth and silent
operation. (Patent pending).
Choices of tactile, nontactile or tactile/audible
actuation.
Compact design with height of .906” (23.0mm)
from PC board to top of cap. (Same height as
programmable SmartSwitch™.)
Flat, sculptured or home key square caps in three
common sizes for design flexibility in audio/video
applications.
Twin contacts with gold plating assure high reliability
and long life of 5,000,000 operations minimum.
Actual Size
www.nkk.com
D37
Series KP
Miniature Audio/Video Pushbuttons
TYPICAL SWITCH ORDERING EXAMPLE
KP 01 15A N B K G03 6CF 2 S JB
Housing
LEDs
Cap Colors
K
Black only
Super Bright
Red/Green Bicolor
Clear Lens
JB & White
Diffuser
6CF
Red/Green/Blue
(Custom)
RGB
D
* See Note
Pole & Circuit
Plungers
SPST OFF (ON)
15A
9.2mm Plunger
for 12.0mm Cap
A
B
Cap Types
(
) = Momentary
Normally Open Contacts
F
S
T
Flat
11.6mm Plunger for
15.0mm & 17.4mm
Caps
Sculptured
Home Key
Contacts & Terminals
Gold Contacts and
G03 Straight PC Terminals;
100mA @ 12V DC
Travel & Force
Actuation
Cap Sizes
Stroke: 4.5mm (.177”)
Actuation Force: 1.9N
1
2
3
12.0mm Square
15.0mm Square
17.4mm Square
** See Note
01
02
01
C
Tactile
Stroke: 3.5mm (.138”)
Actuation Force: 1.6N
N
Nontactile
02
C
N
S
Tactile
Notes
Nontactile
Tactile/Audible
*Custom RGB LED Page D42
** Custom Rectangular Cap Page D43
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
KP0115ANBKG036CF-2SJB
11.6mm Plunger and
15.0mm Sculptured Cap
Clear Lens and White Diffuser
Super Bright
Red/Green Bicolor LED
Nontactile Actuation
Black Housing
SPST
OFF-Momentary ON Circuit
Normally Open Contacts
Gold Contacts with 100mA Rating
Straight PC Terminals
D38
www.nkk.com
Miniature Audio/Video Pushbuttons
Series KP
POLE & CIRCUIT
Plunger Position
Connected Terminals
Throw & Switch Schematic
( ) = Momentary
Normal
Down
Normal
Down
Note: Switch terminals “1” & “1a” are actually
marked on the switch.
Pole
Model
1 (COM)
KP0115A
KP0215A
Normally
Open
SP
OFF
(ON)
1-1a
SPST
1a
D
ACTUATION
HOUSING
C
N
S
K
Tactile
Nontactile
Tactile/Audible
Black only
KP01 or KP02
KP01 or KP02
KP02 only
CONTACTS, TERMINALS, & RATING
G03
Gold Contacts
Straight PC Terminals
100mA @ 12V DC
SUPER BRIGHT BICOLOR LED SPECIFICATIONS
The electrical specifications shown are determined at a basic temperature of 25°C.
(–) L2
6CF
ATTENTION
Green
(+) COM
ELECTROSTATIC
SENSITIVE DEVICES
(–) L1
Red
Colors
Red
450
700
Green
820
Unit
mcd
mcd
Minimum Luminous Intensity
Standard Luminous Intensity
IV
IV
LEDs are an integral part of
the switch and are not avail-
able separately.
1100
30
25
Forward Peak Current
IFM
mA
(25 for amber)
(22 for amber)
LED circuit is isolated and
requires an external power
source.
Continuous Forward Current
Forward Voltage
IF
15
2.1
15
3.2
mA
V
VF
PD
If the source voltage exceeds
the rated voltage, a ballast
resistor is required.
Power Peak Dissipation
63
80
mW
V
Reverse Peak Voltage
VRM
λ
5
5
The resistor value can be
calculated by using the
formula in the Supplement
section.
Wavelength at Peak Emission
Current Reduction Rate Above 25°C
Ambient Temperature Range
630 ~ 640
0.40
520 ~ 535
0.36
nm
∆IF
mA/°C
°C
–25 ~ +50
Amber can be achieved by simultaneous illumination of Red & Green.
www.nkk.com
D39
Series KP
Miniature Audio/Video Pushbuttons
PLUNGERS
B
9.2mm Plunger
A
11.6mm Plunger
for 15.0mm & 17.4mm Caps
(9.2)
.362
(11.6)
.457
for 12.0mm Cap
(6.4)
.252
(6.4)
.252
9.2mm Plunger is designed
11.6mm Plunger is designed
with a narrower neck to
hold the 12.0mm Cap.
with a wider neck to hold both
the 15.0mm and 17.4mm Caps.
CAP TYPES & COLORS
1
2
D
Used on A Plunger
12.0mm Square
S
T
F
AT3083 Flat Cap
AT3078 Sculptured Cap
AT3086 Home Key Cap
(6.5)
.256
(6.5)
.256
(6.5)
.256
(2.6) Dia
.102
(12.0) Sq
.472
(12.0) Sq
.472
(12.0) Sq
.472
Used on B Plunger
15.0mm Square
T
F
S
AT3079 Sculptured Cap
AT3087 Home Key Cap
AT3084 Flat Cap
(7.0)
.276
(7.0)
.276
(7.0)
.276
(2.6) Dia
.102
(15.0) Sq
.591
(15.0) Sq
.591
(15.0) Sq
.591
3
Used on B Plunger
17.4mm Square
T
F
S
AT3080 Sculptured Cap
AT3088 Home Key Cap
AT3085 Flat Cap
(7.0)
.276
(7.0)
.276
(7.0)
.276
(2.6) Dia
.102
(17.4) Sq
.685
(17.4) Sq
.685
(17.4) Sq
.685
JB
Lens & Diffuser Colors Available:
Clear Lens
Clear/White
White Diffuser
Materials & Finishes: Lens - Polycarbonate with glossy finish; Diffuser - Polycarbonate with textured finish
Optional Protective Guard AT4170 available; contact factory.
D40
www.nkk.com
Miniature Audio/Video Pushbuttons
Series KP
TYPICAL SWITCH DIMENSIONS
12.0mm Square Cap
(7.62)
.300
(6.4)
.252
(3.6)
.142
(7.62)
.300
(0.3)
.012
(0.37) Typ
.015
(0.6) Typ
.024
(1.3) Dia Typ
.051
1
1a
(4.5)
.177
(4.5)
.177 (12.7)
.500
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
COM
(12.7)
.500
L1
C
L2
L2
L1
(0.25)
.010
+
–
0.5
(5.08)
.200
(1.1)
(2.54) Typ
.100
.043
D
(6.5)
.256
(11.5)
.453
(12.7)
.500
(15.0) Sq
.591
(5.0)
.197
(23.0)
.906
(12.7)
.500
(12.0) Sq
.472
(6.0)
.236
KP0115ACAKG036CF-1SJB
15.0mm Square Cap
(7.62)
.300
(3.6)
.142
(6.4)
.252
(7.62)
.300
(0.3)
.012
(0.37) Typ
.015
(0.6) Typ
.024
(1.3) Dia Typ
.051
1
1a
(4.5)
.177
(4.5)
.177 (12.7)
.500
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
COM
L1
C
L2
(12.7)
.500
L2
L1
(0.25)
.010
+
–
0.5
(5.08)
.200
(1.1)
.043
(2.54) Typ
.100
(12.7)
.500
(15.0) Sq
.591
(7.0)
.276
(4.5)
.177
(23.0)
.906
(11.5)
.453
(12.7)
.500
(6.0)
.236
(15.0) Sq
.591
KP0115ANBKG036CF-2SJB
17.4mm Square Cap
(7.62)
.300
(6.4)
.252
(3.6)
.142
(7.62)
.300
(0.3)
.012
(0.37) Typ
.015
(0.6) Typ
.024
(1.3) Dia Typ
.051
1
1a
(4.5)
.177
(4.5)
.177 (12.7)
.500
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
COM
L1
C
L2
(12.7)
.500
L2
L1
(0.25)
.010
+
0.5
–
(5.08)
.200
(1.1)
.043
(2.54) Typ
.100
(12.7)
.500
(15.0) Sq
.591
(7.0)
.276
(4.5)
(11.5)
.453
(12.7)
.500
.177
(23.0)
.906
(6.0)
.236
(17.4) Sq
.685
KP0115ANBKG036CF-3SJB
www.nkk.com
D41
Series KP
Miniature Audio/Video Pushbuttons
CUSTOM RGB
LED SPECIFICATIONS
Red
The electrical specifications shown are
determined at a basic temperature of
25°C.
LEDs are an integral part of the switch
and are not available separately.
LED circuit is isolated and requires an
external power source.
If the source voltage exceeds the rated
voltage, a ballast resistor is required.
ATTENTION
RGB
ELECTROSTATIC
Green
Blue
SENSITIVE DEVICES
Common
Anode (+)
Color
IFM
Red
30
Green
30
Blue
30
Unit
mA
mA
V
Forward Peak Current
Continuous Forward Current
Forward Voltage
IF
20
15
15
VF
2.0
40
3.3
3.4
80
Power Peak Dissipation
Reverse Peak Voltage
Dominant Wavelength
PD
80
mW
V
The resistor value can be calculated by
using the formula in the Supplement
Section.
VRM
λd
5
5
5
D
625
0.50
525
470
0.50
nm
Note: For applications that require
white illumination, contact factory.
Current Reduction Rate Above 25°C
Ambient Temperature Range
∆
0.50
–25 ~ +50
mA/°C
°C
IF
TYPICAL SWITCH DIMENSIONS
Common Anode (+)
B(-)
12.0mm Square Cap with RGB LED
Terminal Detail
R(-)
G(-)
(7.62)
.300
(0.6) Typ
.024
(0.3)
.012
(6.4)
.252
(3.6)
.142
(7.62)
(1.3) Dia Typ
.051
.300
1
1a
B(-) (+)
(4.5)
.177
(4.5)
.177
(0.9) DiaTyp
.035
(12.7)
.500
(12.7)
.500
(0.7) Dia Typ
.028
(3.81)
.150
(3.81)
.150
See Terminal
Detail
R(-) G(-)
(1.52) Typ
.060
(1.1)
.043
(0.2) Sq Typ
.008
(1.52) Typ
.060
(12.7)
.500
(12.7)
.500
(6.5) (5.0)
.256 .197
(11.5)
.453
(12.0) Sq
.472
(23.0)
.906
(4.0)
.157
(15.0) Sq
.591
KP0115ACAKG03RGB-1SJB
15.0mm & 17.4mm Square Caps with RGB LED
Common Anode (+)
B(-)
15.0mm Cap
Terminal Detail
R(-)
G(-)
(15.0) Sq
.591
(7.62)
.300
KP0115ANBKG03RGB-2SJB
(0.6) Typ
.024
(0.3)
.012
(6.4)
.252
(3.6)
.142
(7.62)
.300
(1.3) Dia Typ
.051
(4.5)
1
1a
B(-) (+)
.177
(12.7)
.500
(4.5)
.177
(0.9) DiaTyp
.035
(0.7) Dia Typ
.028
(12.7)
.500
See Terminal
Detail
(3.81)
.150
(3.81)
.150
R(-) G(-)
(1.52) Typ
.060
(1.1)
(0.2) Sq Typ
.008
(1.52) Typ
.060
.043
(12.7)
.500
(7.0) (4.5)
.276 .177
(11.5)
.453
(12.7)
.500
(15.0) Sq
.591
(17.4) Sq
.685
(23.0)
.906
(4.0)
.157
KP0115ANBKG03RGB-3SJB
D42
17.4mm Cap
www.nkk.com
Miniature Audio/Video Pushbuttons
Series KP
CUSTOM RECTANGULAR CAP ASSEMBLY
CAP ASSEMBLY DIMENSIONS
(3.6)
.142
(4.5)
.177
Switch/Rectangular Cap Assembly
1
(12.7)
.500
L+
L–
(34.8)
1.370
(7.62)
.300
(2.54)
.100
1a
(0.6)
.024
(0.45) SqTyp
.018
D
(0.3)
.012
(7.0)
.276
(12.7)
.500
(17.4)
.685
(23.0)
.906
(6.0)
.236
(15.0) Sq
.591
KP0115ACBKG03CJB for Tactile
KP0115ANBKG03CJB for Nontactile
See below for complete assembly of switch, LEDs and LED holders.
LED SPECIFICATIONS
The electrical specifications shown are
determined at a basic temperature of 25°C.
Center LED is an integral part of the switch.
LEDs are not sold separately.
LED circuits are isolated and require an
external power source.
(+)
(-)
Red
30
Unit
mA
mA
V
Color
IFM
IF
Forward Peak Current
Continuous Forward Current
Forward Voltage
20
VF
2.0
Reverse Peak Voltage
VRM
λd
4
V
If the source voltage exceeds the rated
voltage, a ballast resistor is required.
Dominant Wavelength
623
nm
The resistor value can be calculated by us-
ing the formula in the Supplement Section.
Current Reduction Rate Above 25°C
Ambient Temperature Range
Contact factory for other LED colors.
∆IF
0.32
–25 ~ +50
mA/°C
°C
ASSEMBLY & INSTALLATION INSTRUCTIONS
(0.9) Dia Typ
.035
(4.5)
.177
(2.54)
.100
(3.1)Dia
.122
Cathode
(1.3) Dia Typ
.051
LED
(12.7)
.500
1
L+
L–
(12.7) (22.86)
(7.62)
Footprint
.300 .500 .900
1a
(2.54)
.100
(5.9)
.232
LED Holder
(6.7)
.264
(0.8) Dia Typ
.031
(2.54)
.100
(4.8)
.189
(10.4)
.409
(12.7)
.500
LED
LED Holder
1
2
3
Install LED into LED Holder
(quantity 2).
Switch/Rectangular Cap assembly has 3 LEDs
to achieve bright and even illumination.
Solder LEDs and LED Holders
into PCB.
One LED (in center of switch bottom) is an
integral part of the switch; the other 2 LEDs
and 2 LED Holders are packaged separately.
Solder switch into PCB making
sure that the two outer LEDs
and LED Holders clear the bot-
tom side opening of the cap.
Switch
PCB
www.nkk.com
D43
Series KP
Miniature Audio/Video Pushbuttons
ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS
Cap Orientation
ATTENTION
ELECTROSTATIC
SENSITIVE DEVICES
Notch
Tab
Step
As shown in the accompanying illustration, the cap and
plunger are designed with tabs and notches to assure proper
orientation of the cap on the switch.
Plunger
Notches
Removal of Cap Assembly & Separation of Lens & Diffuser
D
Holding the switch tightly, pull the cap off the switch. Once the
cap assembly is released from the plunger, the lens and diffuser can
be separated.
Pry up the lens with fingernail or flat tip screwdriver inserted at
the step on the diffuser.
Installation or Replacement of Cap
Cap
Assembly
Plunger
Switch
After aligning notches with tabs, join the lens and diffuser.
Hold the switch tightly without touching the terminals. Firmly
press the cap onto the plunger by applying pressure from one
side to the other until both are snapped together.
D44
www.nkk.com
Miniature Audio/Video Pushbuttons
Series KP
LEGENDS
NKK Switches can provide custom legends for caps. Contact factory for more information.
Suggested Printable Areas for KP Lens
Lens
Recommended Methods:
Film
ST
OP
Insert
Laser Etch on clear lens, Screen Print, or Pad Print on lens.
Laser Print on film insert.
Epoxy based ink is recommended.
Diffuser
Printing on Diffuser
is not advisable.
D
Shaded areas are suggested printable areas for Lens.
Flat Cap Lens
Custom Rectangular Cap Lens
Sculptured Cap Lens
(28.75)
1.132
(30.28)
1.192
(13.4) Sq
.528
(8.97)Dia
.353
(0.76) Typ
.030
(9.8) Sq
.386
(13.77) Dia
.542
(0.76) Typ
.030
(12.8) Sq
.504
(11.48) Dia
.452
(0.76) Typ
.030
(13.77)
.542
(0.76) Typ
.030
(17.4) Sq
.685
(10.5) Dia
.413
(12.0) Sq
.472
(15.3) Dia
.602
(15.0) Sq
.591
(13.0) Dia
.512
(15.3)
.602
Suggested Printable Areas for KP Film Insert
Shaded areas are suggested printable areas for Film Insert.
Custom Rectangular Film Insert
(0.5) R
.020
(2.125) Typ
.084
Flat Cap Film Inserts
Sculptured or Home Key Cap Film Inserts
(28.75)
1.132
(0.5) R
.020
(0.5) R
.020
(33.0)
1.299
(0.5) R
.020
(0.5) R
.020
(0.5) R
.020
(0.5) R
.020
(11.88) Dia
.468
(0.76) Typ
.030
(11.88) Dia
.468
(0.76) Typ
.030
(8.28) Sq
.326
(0.76) Typ
.030
(0.76) Typ
.030
(8.28)Dia (0.76) Typ
(0.76) Typ
.030
(13.77)
.542
(0.91) Typ
.036
(11.28) Sq
.444
(11.28) Dia
.444
.326
.030
(13.4) Sq
.528
(13.4) Sq
.528
(9.8) Sq
.386
(9.8) Sq
.386
(12.8) Sq
.504
(12.8) Sq
.504
(15.6)
.614
Film Insert Material and Thickness: Clear Polyester; 4 mil (100µ) maximum thickness
www.nkk.com
D45
相关型号:
©2020 ICPDF网 联系我们和版权申明