LB25WKG01-GJ [NKK]
Standard Size Panel Seal Pushbuttons; 标准尺寸面板密封按钮开关型号: | LB25WKG01-GJ |
厂家: | NIHON KAIHEIKI INDUSTRY CO. LTD. |
描述: | Standard Size Panel Seal Pushbuttons |
文件: | 总6页 (文件大小:237K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Standard Size Panel Seal Pushbuttons Series LB
Distinctive Characteristics
Square, round, rectangular, and round panel seal models
available.
Stainless steel clips provide secure mounting with a wide
range of panel thicknesses.
Latchdown feature gives indication of circuit status.
Audible and tactile feedback with smooth and
responsive operation.
Snap-action contact mechanism gives long electrical
life and sensitivity of actuation.
Combination solder lug and .110” quick connect
terminals are epoxy sealed to prevent entry of flux,
dust, and other contaminants.
Panel sealed model meets IP65 of IEC60529 specifications
(similar to NEMA 4 & 13).
Compact switch design minimizes behind panel depth.
Matching illuminated models available and shown in the
Illuminated Pushbutton section.
Matching indicators available and shown at the end of Section M.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Panel Seal Pushbuttons Series LB
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): 3A @ 125V AC or 3A @ 250V AC
Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance: 50 milliohms maximum for silver; 100 milliohms maximum for gold
Insulation Resistance: 200 megohms minimum @ 500V DC
Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
Mechanical Life: 1,000,000 operations minimum for momentary circuit
200,000 operations minimum for maintained circuit
Electrical Life: 100,000 operations minimum
Nominal Operating Force: 5.39N
Contact Timing: Nonshorting (break-before-make)
Travel: Momentary: Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm)
Maintained: Pretravel .087” (2.2mm); Overtravel .031” (0.8mm); Total Travel .118” (3.0mm)
Materials & Finishes
Housing: Glass fiber reinforced polyamide (UL94V-0)
O-ring: Nitrile butadiene rubber
Inner Seal: Silicone rubber
Movable Contact: Silver alloy or copper with gold plating
Stationary Contacts: Silver alloy or copper with gold plating
Base: Liquid crystal polymer (UL94V-0)
Terminals: Phosphor bronze with silver or gold plating
Environmental Data
Operating Temp Range: –25°C through +70°C (–13°F through +158°F)
Note: When used with a polyvinyl chloride splash cover, the lowest limit is 0°C (32°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in
1 minute; 3 right angled directions for 2 hours
2
Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Sealing: IP65 of IEC60529 standard (similar to NEMA 4 & 13)
Installation
Mounting Torque:
1.96Nm (17.35 lb•in) maximum
Cap Installation Force: 3.92N maximum downward force on cap
Quick Connect Force: 52.95N maximum downward force on connector
Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section.
Standards & Certifications
Flammability Standards: UL94V-0 housing & base
UL & C-UL Recognized: All models recognized at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch;
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
R
CSA Certified: All models certified at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum;
CSA File Nos. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Panel Seal Pushbuttons Series LB
TYPICAL SWITCH ORDERING EXAMPLE
LB
1
6 W K W01
CJ
POLES
SHAPE
CONTACTS & TERMINALS
1
2
SPDT
DPDT
W
Round
Silver Contacts
W01 Rated 3A @ 125/250V AC and
Solder Lug/Quick Connect Terminals
Gold Contacts
G01 Rated 0.4VA @ 28V AC/DC and
Solder Lug/Quick Connect Terminals
CIRCUITS
5
ON
(ON)
( ) = Momentary
HOUSING
Black
CAP COLORS
6
ON
ON
K
BJ
CJ
EJ
White
Red
Alternate Action
with Latchdown
G
Gray
Yellow
Green
Blue
FJ
GJ
IMPORTANT:
Note: Insert Cap with clear
lens and colored filter
available; see
Illuminated
Switches are supplied without UL,
C-UL & CSA markings unless speci-
fied. Specific models & ratings noted
on General Specifications page.
Pushbuttons section
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
LB16WKW01-CJ
Red Cap
Round Shape
Black Housing
SPDT
ON-ON Circuit
Silver Contacts
Rated 3A @ 125/250V AC;
Solder Lug/Quick Connect Terminals
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Panel Seal Pushbuttons Series LB
POLES & CIRCUITS
Plunger Position
( ) = Momentary
Connected Terminals
Throw & Switch/Lamp Schematics
Normal
Down
Normal
Down
Note: Switch is marked with NC, NO, COM, L+, L–.
Pole
Model
1
COM
2
LB15
*LB16
ON
ON
(ON)
ON
L (+)
L (+)
(-) L
(-) L
SP
1-3
1-2
SPDT
DPDT
3
NC
NO
4
1
COM
COM
5
LB25
*LB26
ON
ON
(ON)
ON
DP
1-3 4-6
1-2 4-5
3
2
6
NC
NO
NC
NO
* When in latchdown position for the alternate circuit, cap position is .039” (1.0mm) above the built-in bezel.
SHAPE & PANEL CUTOUT
.866” (22.0mm)
Round
W
(1.7)
.067
Recommended Panel Thickness:
.039” ~ .157” (1 ~ 4mm)
(10.5)
.413
Recommended Panel Thickness
with Splash Cover:
.039” ~ .138” (1 ~ 3.5mm)
Overtightening the mounting nut AT074
may damage the switch housing.
(22.0) Dia
.866
HOUSING
K
G
Black
Gray
Housing Colors Available:
CONTACT MATERIALS, RATINGS & TERMINALS
Power Level
W01
Solder Lug/Quick Connect
3A @ 125V AC & 250V AC
Silver Contacts
Epoxy
Seal
(7.5)
.295
Logic Level
0.4VA max. @ 28V AC/DC max.
(2.0)
.079
(2.8)
G01
Gold Contacts
.110
(1.2)
.047
Thk = (0.5)
.020
Complete explanation of operating range in Supplement section.
CAP COLORS
Lens/Filter
Colors Available:
(19.0) Dia
.748
AT4054
BJ
EJ
FJ
GJ
White
Yellow
Green
Blue
(5.1)
.201
CJ
Red
Material: Polycarbonate
Finish: Glossy
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Panel Seal Pushbuttons Series LB
TYPICAL SWITCH DIMENSIONS
Panel Seal
Single & Double Pole
(5.5)
.217
(1.2) x (2.0) Typ
.047 x .079
M22 P1
(0.5) Typ
.020
L (+)
NC
NO
3
2
6
5
4
(15.8) Sq
.622
COM
1
L
(-)
(2.54) Typ
.100
(1.8)
.071
(1.0)
.039
(3.2)
.126
Keyway
(12.0)
.472
(19.0) Dia
.748
(2.8) Typ
.110
(25.0) Dia
.984
(21.5)
(7.5)
.295
(5.08) Typ
.200
.846
Latchdown Position
LB25WKW01-CJ
Single pole models do not have terminals 4, 5, & 6.
OPTIONAL ACCESSORIES
PCB Adaptors
AT711
Single Pole • Straight PC Terminals
AT712
Double Pole • Straight PC Terminals
(0.3) Typ
.012
(0.3) Typ
.012
(5.08) Typ
.200
(5.08)
.200
NC
NO
NC
NO
NC
NO
NC
NO
(+)
(-)
(+)
(-)
L
L
L
L
(15.8) Sq
.622
(15.8) Sq
.622
(2.54) Typ
.100
(2.54) Typ
.100
COM
COM
COM
COM
(2.54) Typ
.100
(2.54) Typ
.100
(1.0) Dia Typ
.039
(1.0) Dia Typ
.039
(0.5)
.020
(15.0)
.591
(0.5)
.020
(15.0)
.591
(0.74) Typ
.029
(0.74) Typ
.029
(4.0)
.157
(5.08)
.200
(4.0)
.157
(5.08)
.200
Note: Order adaptors separately.
AT9410 Splash Cover for Panel Seal
Lid
Base
Materials:
Lid: Polyvinyl chloride
(PVC loses pliability below 0°C/32°F)
Base: Polyethylene
O-ring: NBR
O-ring Supplied with
Panel Seal Switch
O-ring Supplied with
AT9410 Splash Cover
Recommended Panel Thickness:
.039” ~ .138” (1.0mm ~ 3.5mm)
(21.0) Dia
.827
(10.6)
.417
(22.0) Dia
.866
(3.0)
.118
(1.6)
.063
(23.0) Dia
.906
(31.3) Dia
1.232
(31.3) Dia
1.232
(7.8)
.307
(0.5)
.020
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Pushbuttons Series LB
ASSEMBLY INSTRUCTIONS
Cut Corner
Round & Rectangular
Match clip on cap assembly with
receptacle inside switch.
C
.
Projection
C
.
N
.
C
C
.
C
A
A
V
N
V
0
5
5
2
2
1
A
A
3
3
L B - 1 5 S K
Rubber Seal
.
O
.
N
C
Projection
Notch
Square
Panel Seal
Match projection on cap assembly
with notch inside switch.
Match projection (C) on cap assembly
with groove (C) inside switch.
Panel Seal
Bushing Mount
Snap-in Mount
Snap-in clip holds all switches firmly
in place. To mount round switch,
match the antirotation projection
on switch with
Insert switch from the front of the panel
with the o-ring between the built-in
bezel and the panel. Install mounting
nut AT075 (supplied
AT109
Cap Extractor
guide cut in
with switch) from the
Bezel
O-ring
panel. Snap
rear of the panel.
Overtightening
mounting nut may
damage the switch
housing.
Projection
into panel
cutout.
Panel
AT112
Socket Wrench
Panel
Mounting Nut
LEGENDS
LM
Easily create and submit your own legends using our new on-line Legend Maker.
Visit www.nkkswitches.com
For other legend support options, customers may either contact the factory and request the LB Legend Packet,
or utilize the general information and basic specifications presented below.
Suggested Printable Area for LB Lens
(0.76) Typ
.030
AR
(11.68) (13.2)
T
.460
.520
(17.48) Dia
.688
(19.0) Dia
.748
(0.76) Typ
.030
(11.68) Sq
.460
(13.2) Sq
.520
(0.76) Typ
.030
(17.88)
.704
(0.76) Typ
.030
Recommended Methods:
Laser Etch on clear lens;
(19.4)
.764
Screen Print or Pad Print on lens.
Epoxy based ink is recommended.
Shaded areas are printable areas.
Additional Method
Additional method for legends is engraving the cap. Maximum depth for engraving is .012” (0.3mm) on the cap lens.
Enamel paint is recommended to fill the engraved area.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
相关型号:
©2020 ICPDF网 联系我们和版权申明