P2021B [NKK]
Internationally Approved Toggles; 国际认可的切换
| 型号： | P2021B |
| 厂家： | 
NIHON KAIHEIKI INDUSTRY CO. LTD. |
| 描述： | Internationally Approved Toggles |
| 文件： | 总4页 (文件大小：172K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Internationally Approved Toggles Series P
Distinctive Characteristics
International certifications from UL, CSA, VDE, SEMKO, and SEV.
High torque bushing construction prevents rotation or separation
from frame during installation.
Stainless steel frame resists corrosion and increases
environmental safety.
Case/base of heat resistant resin meets UL94V-0
flammability standard.
Contacts of special silver alloy resist arcing
and guarantee stable electrical contact and
long life.
High insulating barriers increase isolation of
circuits in double pole devices and provide
added protection to contact points.
Prominent external insulating barriers
increase insulation resistance and dielectric
strength.
Epoxy sealed terminals prevent entry of flux, solvents,
and other contaminants.
Clinching of the frame to the case well above the base and
terminals provides 4,000V dielectric strength.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved Toggles Series P
General Specifications
Electrical Capacity
Resistive Load:
10A @ 125V AC or 6A @ 250V AC
Motor Load:
Lamp Load:
400W @ 125V AC
2A @ 125V AC for On-Off-On circuit & 3A @ 125V AC for other circuits
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
10 milliohms maximum
1,000 megohms minimum @ 500V DC
2,000V AC minimum between contacts for 1 minute minimum;
4,000V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum
Mechanical Life:
Electrical Life:
25,000 operations minimum
Angle of Throw:
25°
Materials & Finishes
Toggle Cap:
Brass with nickel plating
Brass with chrome plating
Brass with nickel plating
Stainless steel
Lever:
Bushing:
Frame:
Case/Base:
Diallyl phthalate resin (UL94V-0)
Silver alloy with silver plating
Pure silver with silver plating
Copper with silver plating
Movable Contacts:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temp Range:
Humidity:
–10°C through +85°C (+14°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Shock:
Installation
Soldering Time & Temp:
Wave Soldering Recommended (Straight PC): See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Standards & Certifications
Flammability Standards:
UL Recognized:
UL94V-0 rated case/base
All models recognized at 10A @ 125V AC & 6A @ 250V AC; UL File No. WOYR2.E44145.
Add “/U” to end of part number to order UL mark on switch.
C-UL Recognized:
All models recognized at 10A @ 125V AC & 6A @ 250V AC; C-UL File No. WOYR8.E44145.
Add “/C-UL” to end of part number to order C-UL mark on switch.
R
CSA Certified:
All models certified at 10A @ 125V AC & 6A @ 250V AC; CSA File No. 023535-0-000.
Add “/C” to end of part number to order CSA mark on switch.
V
VDE Approved:
All models approved at 10A @ 125V AC & 6A @ 250V AC; License No. 119174.
Marking on switch is standard.
D
E
SEMKO Approved:
SEV Approved:
P2011, P2012, P2013, P2021, P2022 models approved at 10A @ 125V AC &
6A @ 125/250V AC; Reference No. 9915205/01-02. Marking on switch is standard.
All models with Quick Connect Terminals approved at 10A @ 125V AC & 6A @ 125/250V AC;
(P2013 for micro-switch only); Authorization No. 02.0466. Marking on switch is standard.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved Toggles Series P
TYPICAL SWITCH ORDERING EXAMPLE
P20
22
B
POLES & CIRCUITS
TOGGLES & BUSHINGS
TERMINALS
Solder Lug
11 SPST
12 SPDT ON NONE ON
13 SPDT ON OFF ON
ON NONE OFF
No
.512” (13.0mm) White Cap
with 6mm Bushing
No
Code
Code
.450” (11.4mm) Flatted
with 6mm Bushing
P
Straight PC
E
B
D
.187” (4.75mm)
Quick Connect
21 DPST ON NONE OFF
22 DPDT ON NONE ON
Z
.689” (17.5mm) Large Bat
with 12mm Bushing
23 DPDT ON
OFF
ON
.748” (19.0mm) White Capped
Column with 12mm Bushing
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
P2022B
.689” (17.5mm) Large Bat
with 12mm Bushing
IMPORTANT:
VDE, SEMKO & SEV are marked
on approved models. Switches
are supplied without UL, C-UL &
CSA marking unless specified.
Specific models & ratings noted
on General Specifications page.
DPDT
ON-NONE-ON Circuit
Solder Lug Terminals
POLES & CIRCUITS
Toggle Position
Center
Connected Terminals
Throw & Schematics
Down
Up
Down
Center
Up
Note: Terminal numbers are on
the switch.
Keyway
Keyway
Pole
Model
P2011
1 (COM)
SP
SP
DP
DP
ON
NONE
OFF
1-1b
1-1b
OPEN
OPEN
OPEN
OPEN
OPEN
1-1a
SPST
1b
1 (COM)
P2012
P2013
ON
ON
NONE
OFF
ON
ON
SPDT
1a
(COM)
1b
1
2
P2021
ON
NONE
OFF
1-1b 2-2b
1-1b 2-2b
OPEN
DPST
DPDT
1b
1
2b
(COM)
1b 2a
2
P2022
P2023
ON
ON
NONE
OFF
ON
ON
1-1a 2-2a
1a
2b
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Internationally Approved Toggles Series P
TOGGLES & BUSHINGS
.512” (13.0mm)
White Cap with
6mm Bushing
.450” (11.4mm)
Flatted with
.689” (17.5mm)
Large Bat with
12mm Bushing
.748” (19.0mm)
No Code
E
B
D
White Capped Column
with 12mm Bushing
6mm Bushing
25°
25°
(4.4) Dia
.173
25°
(6.0) Dia
.236
(5.08)
25°
(4.2) Dia
.165
.200
(2.54)
.100
(19.0)
.748
(17.5)
.689
(13.0)
.512
(11.4)
.450
Panel Cutouts
(12.5) Dia
.492
(12.5) Dia
Panel Thickness
with Keyway
.134” (3.4mm)
maximum
Panel Thickness
Panel Thickness
with Keyway
.256” (6.5mm)
maximum
Panel Thickness
with Locking Ring
.217” (5.5mm)
maximum
.492
(5.6)
(11.5)
.453
.220
with Locking Ring
.102” (2.6mm)
maximum
(6.5)
.256
(6.35) Dia
.250
(6.35) Dia
.250
(0.6)
.024
(9.0)
.354
(1.5)
.060
(2.2) Dia
.087
(3.0) Dia
.118
Standard Hardware
For 6mm Bushing: 1 Locking Ring AT507M, 1 Internal Tooth Lockwasher AT509, 2 Hex Nuts AT513M
For 12mm Bushing: 1 Hex Face Nut AT503M, 1 Locking Ring AT506M, 1 Internal Tooth Lockwasher AT508, 1 Hex Mounting Nut AT527M
TERMINALS
Epoxy Seal
(9.0)
.354
.187” (4.75mm)
Quick Connect
(6.35)
.250
(2.0)
.079
No Code
P
Z
(4.5)
.177
(1.25)
.049
Solder Lug
(2.6)
.102
(1.3) Dia
(4.75)
.187
.051
Thk = (0.8)
Thk = (1.0)
.031
.039
Epoxy Seal
1b
1
2b
1b
1
1b
1
2b
2
1b
1
(7.6)
.299
(7.62) Typ
.300
(7.62) Typ
.300
(7.62) Typ
(7.62) Typ
.300
.300
2
Straight PC
SPST
SPDT
DPST
DPDT
(4.8)
.189
(1.17)
.046
Thk = (1.0)
.039
(1.8) Dia Typ
.071
(1.8) Dia Typ
.071
(10.16)
.400
1a
2a
1a
(1.8) Dia Typ
.071
(10.16)
.400
(1.8) Dia Typ
.071
TYPICAL SWITCH DIMENSIONS
6mm Bushing
P2011, P2012, P2013
(1.25) x (2.0) Typ
.049 x .079
(1.0) Typ
.039
Keyway
M6 P0.75
1b
(0.8)
.031
(20.5)
.807
25°
1
(7.62)
.300
1a
(4.2) Dia
.165
(0.5)
.020
(5.0)
.197
(0.9)
.035
(8.0)
.315
(11.0)
.433
(13.0)
.512
(22.0)
.866
(2.6)
.102
P2012
P2011 models do not have terminal 1a.
12mm Bushing
P2021B, P2022B, P2023B
(1.25) x (2.0) Typ
.049 x .079
(1.0) Typ
.039
Keyway
M12 P1
2b
1b
(0.8)
.031
(20.5)
.807
25°
2
1
(7.62)
.300
2a
1a
(0.5)
.020
(6.0) Dia
.236
(2.6) Typ
.102
(5.0)
.197
(20.0)
.787
(17.5)
.689
(12.0)
.472
(21.1)
.831
(10.16)
.400
P2022B
P2021 models do not have terminals 1a & 2a.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
相关型号：
©2020 ICPDF网 联系我们和版权申明