RGB-1SJB12 [NKK]
General Specifications;型号: | RGB-1SJB12 |
厂家: | NIHON KAIHEIKI INDUSTRY CO. LTD. |
描述: | General Specifications |
文件: | 总12页 (文件大小:363K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series KP
Miniature Audio/Video Pushbuttons
General Specifications
Electrical Capacity (Resistive Load)
Low Level:
100mA maximum @ 12V DC
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
200 milliohms maximum
100 megohms minimum @ 250V DC
1,000V AC minimum between contacts for 1 minute minimum
1,500V AC minimum between contacts & case for 1 minute minimum
5,000,000 operations minimum;
D
Mechanical Life:
1,000,000 operations minimum for custom Rectangular Switch/Cap Assembly (at center of cap)
5,000,000 operations minimum
Electrical Life:
Nominal Operating Force:
KP01: 1.9N maximum for Tactile & Nontactile models (at center of cap)
KP02: 1.6N maximum for Tactile, Nontactile & Tactile/Audible models (at center of cap)
KP01: Pretravel .122” (3.1mm); Overtravel .055” (1.4mm); Total Travel .177” (4.5mm)
KP02: Pretravel .091” (2.3mm); Overtravel .047” (1.2mm); Total Travel .138” (3.5mm)
Travel:
Materials & Finishes
Plunger/Upper Housing:
Lower Housing:
Polyacetal
Glass fiber reinforced PBT (UL94V-0)
Stainless steel with gold plating
Gold over copper alloy
Brass with tin plating
Movable Contact:
Stationary Contacts:
Switch Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
–25°C through +50°C (–13°F through +122°F)
90-95% humidity for 240 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
51G (500m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
2
Shock:
Installation
Cap Installation Force :
50.0N maximum downward force on actuator
PCB Processing
Soldering:
Wave Soldering. See Profile A in Supplement section.
Manual Soldering. See Profile A in Supplement section.
Cleaning:
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards:
UL94V-0 lower housing
The KP Series pushbuttons have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
D36
www.nkkswitches.com
Miniature Audio/Video Pushbuttons
Series KP
Distinctive Characteristics
KP series offers a complete switch solution for all broadcast panel needs,
including home keys and the rectangular switch/cap assembly.
Distinct, long total travel of .177” (4.5mm) for KP01 or shorter stroke
of .138” (3.5mm) for KP02.
Available with super bright red/green or amber/blue bicolor
LED or RGB LED. The RGB LED full color spectrum in a
switch package provides unlimited color combinations.
D
Unique actuation guide gives positive indication
of circuit transfer as well as smooth and silent
operation.
Choices of tactile, nontactile or tactile/audible
actuation.
Compact design with height of .906” (23.0mm)
from PC board to top of cap. (Same height as
programmable SmartSwitch™.)
Flat, sculptured or home key square caps in three
common sizes for design flexibility in audio/video
applications.
Twin contacts with gold plating assure high reliability
and long life of 5,000,000 operations minimum.
Actual Size
www.nkkswitches.com
D37
Series KP
Miniature Audio/Video Pushbuttons
TYPICAL SWITCH
KP 01 15A N B K G03
Housing
K
Black only
D
Pole & Circuit
Plungers
Contacts & Terminals
SPST OFF (ON)
15A
9.2mm Plunger
for 12.0mm Cap
Gold Contacts and
G03 Straight PC Terminals;
100mA @ 12V DC
A
B
( ) = Momentary
Normally Open Contacts
11.6mm Plunger for
15.0mm & 17.4mm
Caps
Travel & Force
Actuation
Stroke: 4.5mm (.177”)
Actuation Force: 1.9N
01
02
01
C
Tactile
Stroke: 3.5mm (.138”)
Actuation Force: 1.6N
N
Nontactile
02
C
N
S
Tactile
Nontactile
Tactile/Audible
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
KP0115ANBKG036CF-2SJB
11.6mm Plunger and
15.0mm Sculptured Cap
Clear Lens and White Diffuser
Super Bright
Red/Green Bicolor LED
Nontactile Actuation
SPST
OFF-Momentary ON Circuit
Normally Open Contacts
Black Housing
Gold Contacts with 100mA Rating
Straight PC Terminals
D38
www.nkkswitches.com
Miniature Audio/Video Pushbuttons
Series KP
ORDERING EXAMPLE
6CF
2
S
JB
11
LEDs
Super Bright
Red/Green Bicolor
6CF
Cap Types
Flat
Cap Colors
Super Bright
Amber/Blue Bicolor
F
Clear Lens &
White Diffuser
6DG
JB
D
S
T
Sculptured
Home Key
RGB Red/Green/Blue
* See Note
Bicolor Alternating
Legend Caps
JCF
Red/Green
Amber/Blue
JDG
Cap Sizes
1
2
3
12.0mm Square
15.0mm Square
17.4mm Square
** See Note
Alternating Legends
11 ON (pos) OFF (pos)
12 ON (neg) OFF (neg)
13 START
14 OPEN
STOP
CLOSE
Notes
* RGB LED Page D44
** Rectangular Cap Page D45
Contact factory for custom
options.
Part Numbers for Alternating Legends
Flat Cap
Sculptured Cap
Home Key Cap
Color
Cap Size
Part Number
Part Number
Part Number
12mm Square
15mm Square
17.4mm Square
12mm Square
15mm Square
17.4mm Square
AT3093JCF11 ~ AT3093JCF14
AT3094JCF11 ~ AT3094JCF14
AT3095JCF11 ~ AT3095JCF14
AT3093JDG11 ~ AT3093JDG14
AT3094JDG11 ~ AT3094JDG14
AT3095JDG11 ~ AT3095JDG14
AT3090JCF11 ~ AT3090JCF14
AT3091JCF11 ~ AT3091JCF14
AT3092JCF11 ~ AT3092JCF14
AT3090JDG11 ~ AT3090JDG14
AT3091JDG11 ~ AT3091JDG14
AT3092JDG11 ~ AT3092JDG14
AT3096JCF11 ~ AT3096JCF14
AT3097JCF11 ~ AT3097JCF14
AT3098JCF11 ~ AT3098JCF14
AT3096JDG11 ~ AT3096JDG14
AT3097JDG11 ~ AT3097JDG14
AT3098JDG11 ~ AT3098JDG14
Red/Green
Amber/Blue
Refer to Ordering Table for Alternating Legend that corresponds with last 2 digits of part number.
www.nkkswitches.com
D39
Series KP
Miniature Audio/Video Pushbuttons
POLE & CIRCUIT
Plunger Position
( ) = Momentary
Connected Terminals
Throw & Switch Schematic
Normal
Down
Normal
Down
Note: Switch terminals “1” & “1a” are actually
marked on the switch.
Pole
Model
1 (COM)
KP0115A
KP0215A
Normally
Open
SP
OFF
(ON)
1-1a
SPST
1a
ACTUATION
HOUSING
D
C
N
S
K
Tactile
Nontactile
Tactile/Audible
Black only
KP01 or KP02
KP01 or KP02
KP02 only
CONTACTS, TERMINALS, & RATING
G03
Gold Contacts
Straight PC Terminals
100mA @ 12V DC
SUPER BRIGHT BICOLOR LED SPECIFICATIONS
The electrical specifications shown are determined at a basic temperature of 25°C.
(–) L1
Red or Amber
(+) COM
6CF
6DG
ATTENTION
ELECTROSTATIC
SENSITIVE DEVICES
(–) L2
Green or Blue
Red
230
Green
220
Amber
204
Blue
113
Unit
mcd
Colors
IV
Minimum Luminous Intensity
Standard Luminous Intensity
LEDs are an integral
part of the switch
and are not available
separately.
IV
290
30
270
25
340
30
188
25
mcd
mA
Maximum Forward Current
IFM
LED circuit is
25 for Amber 22 for Amber
isolated and requires
an external power
source.
Typical Forward Current
Forward Voltage
IF
VF
PD
15
2.0
5
3.1
20
2.1
75
4
20
3.2
mA
V
If the source voltage
exceeds the rated
voltage, a ballast
resistor is required.
Power Peak Dissipation
Maximum Reverse Voltage
Wavelength at Peak Emission
72
88
100
mW
V
VRM
λ
5
7
4
The resistor value
can be calculated
by using the
formula in the
Supplement section.
620 ~ 630
0.40
528 ~ 538
0.36
583 ~ 595
0.40
464 ~ 476
0.33
nm
Current Reduction Rate Above 25°C ∆IF
Ambient Temperature Range
mA/°C
°C
–25 ~ +50
–25 ~ +50
Amber can be achieved by simultaneous illumination of Red & Green.
Purple can be achieved by simultaneous illumination of Amber & Blue.
D40
www.nkkswitches.com
Miniature Audio/Video Pushbuttons
Series KP
PLUNGERS
B
9.2mm Plunger
for 12.0mm Cap
11.6mm Plunger
for 15.0mm & 17.4mm Caps
A
(9.2)
.362
(11.6)
.457
(6.4)
.252
(6.4)
.252
9.2mm Plunger is designed
with a narrower neck to hold
the 12.0mm Cap.
11.6mm Plunger is designed
with a wider neck to hold both
the 15.0mm and 17.4mm Caps.
CAP TYPES & COLORS
Caps for Bicolor and RGB
D
1
Used on A Plunger
12.0mm Square
AT3083 Flat Cap
S
T
F
AT3078 Sculptured Cap
AT3086 Home Key Cap
(6.5)
.256
(6.5)
.256
(6.5)
.256
(2.6) Dia
.102
(12.0) Sq
.472
(12.0) Sq
.472
(12.0) Sq
.472
2
Used on B Plunger
15.0mm Square
AT3084 Flat Cap
T
F
S
AT3079 Sculptured Cap
AT3087 Home Key Cap
(7.0)
.276
(7.0)
.276
(7.0)
.276
(2.6) Dia
.102
(15.0) Sq
.591
(15.0) Sq
.591
(15.0) Sq
.591
3
Used on B Plunger
17.4mm Square
AT3085 Flat Cap
T
F
S
AT3080 Sculptured Cap
AT3088 Home Key Cap
(7.0)
.276
(7.0)
.276
(7.0)
.276
(2.6) Dia
.102
(17.4) Sq
.685
(17.4) Sq
.685
(17.4) Sq
.685
www.nkkswitches.com
D41
Series KP
Miniature Audio/Video Pushbuttons
Caps for Alternating Legends
1
Used on A Plunger
12.0mm Square
S
T
F
AT3093 Flat Cap
AT3090 Sculptured Cap
AT3096 Home Key Cap
ON
ON
ON
(6.5)
.256
(6.5)
.256
(6.5)
.256
(2.6) Dia
.102
(12.0) Sq
.472
(12.0) Sq
.472
(12.0) Sq
.472
2
Used on B Plunger
15.0mm Square
D
T
F
S
AT3094 Flat Cap
AT3091 Sculptured Cap
AT3097 Home Key Cap
ON
ON
ON
(7.0)
.276
(7.0)
.276
(7.0)
.276
(2.6) Dia
.102
(15.0) Sq
.591
(15.0) Sq
.591
(15.0) Sq
.591
3
Used on B Plunger
17.4mm Square
T
F
S
AT3095 Flat Cap
AT3092 Sculptured Cap
AT3098 Home Key Cap
ON
ON
(7.0)
.276
(7.0)
.276
ON
(7.0)
.276
(2.6) Dia
.102
(17.4) Sq
.685
(17.4) Sq
.685
(17.4) Sq
.685
JB
Lens & Diffuser Colors Available:
Clear Lens
Clear/White
White Diffuser
Materials & Finishes: Lens - Polycarbonate with glossy finish
Diffuser - Polycarbonate with textured finish
Optional Protective Guard AT4170 available; contact factory.
Standard Alternating Legend Pairs
11
12
13
14
CLOSE
OPEN
START STOP
O N
OFF
O N
OFF
Green/Red or Blue/Amber
Green/Red or Blue/Amber
Green/Red or Blue/Amber
Green/Red or Blue/Amber
Cap illumination is alternating Green/Red or Blue/Amber; legend text is black.
Contact factory for other Alternating Legends.
Legend illustrations are approximate representations of the actual characters on the filters.
D42
www.nkkswitches.com
Miniature Audio/Video Pushbuttons
Series KP
TYPICAL SWITCH DIMENSIONS
12.0mm Square Cap
(7.62)
.300
(6.4)
.252
(3.6)
.142
(7.62)
.300
(0.3)
.012
(0.37) Typ
.015
(0.6) Typ
.024
(1.3) Dia Typ
.051
1
1a
(4.5)
.177
(4.5)
.177 (12.7)
.500
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
COM
(12.7)
.500
L1
C
L2
L2
L1
(0.25)
.010
+
–
0.5
(5.08)
.200
(1.1)
(2.54) Typ
.100
.043
(6.5)
.256
(11.5)
.453
(12.7)
.500
(15.0) Sq
.591
(5.0)
.197
(23.0)
.906
(12.7)
.500
(12.0) Sq
.472
(6.0)
.236
D
KP0115ACAKG036CF-1SJB
15.0mm Square Cap
(7.62)
.300
(3.6)
.142
(6.4)
.252
(7.62)
.300
(0.3)
.012
(0.37) Typ
.015
(0.6) Typ
.024
(1.3) Dia Typ
.051
1
1a
(4.5)
.177 (12.7)
.500
(4.5)
.177
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
L1
C
L2
COM
(12.7)
.500
L2
L1
(0.25)
.010
+
–
0.5
(5.08)
.200
(2.54) Typ
.100
(1.1)
.043
(12.7)
.500
(15.0) Sq
.591
(12.7)
.500
(7.0)
.276
(4.5)
.177
(23.0)
.906
(11.5)
.453
(6.0)
.236
(15.0) Sq
.591
KP0115ANBKG036CF-2SJB
17.4mm Square Cap
(7.62)
.300
(6.4)
.252
(3.6)
.142
(7.62)
.300
(0.3)
.012
(0.37) Typ
.015
(0.6) Typ
.024
(1.3) Dia Typ
.051
1
1a
(4.5)
.177
(4.5)
.177 (12.7)
.500
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
COM
L1
C
L2
(12.7)
.500
L2
L1
(0.25)
.010
+
0.5
–
(5.08)
.200
(1.1)
.043
(2.54) Typ
.100
(12.7)
.500
(15.0) Sq
.591
(7.0)
.276
(4.5)
(11.5)
.453
(12.7)
.500
.177
(23.0)
.906
(6.0)
.236
(17.4) Sq
.685
KP0115ANBKG036CF-3SJB
Bicolor Alternating Legend • 15.0mm Square Cap
(3.6)
.142
(7.62)
.300
(6.4)
.252
(7.62)
.300
(0.3)
.012
(0.37) Typ
.015
(0.6) Typ
.024
(1.3) Dia Typ
.051
1
1a
(4.5)
.177 (12.7)
.500
(4.5)
.177
(0.9) Dia Typ
.035
(0.6) Dia Typ
.024
L1
C
L2
COM
L1
(12.7)
.500
L2
(0.25)
.010
+
0.5
–
(2.54) Typ
.100
(1.1)
.043
(5.08)
.200
(12.7)
.500
(7.0)
.276
(12.7)
.500
(15.0) Sq
.591
(4.5)
.177
(23.0)
.906
(11.5)
.453
(15.0) Sq
.591
(6.0)
.236
KP0115ANBKG036DG-2SJDG
www.nkkswitches.com
D43
Series KP
Miniature Audio/Video Pushbuttons
RGB
LED SPECIFICATIONS
Red
The electrical specifications shown are
determined at a basic temperature of
25°C.
LEDs are an integral part of the switch
and are not available separately.
LED circuit is isolated and requires an
external power source.
If the source voltage exceeds the rated
voltage, a ballast resistor is required.
ATTENTION
RGB
ELECTROSTATIC
Green
Blue
SENSITIVE DEVICES
Common
Anode (+)
Color
IFM
Red
30
Green
30
Blue
30
Unit
mA
mA
V
Maximum Forward Current
Typical Forward Current
Forward Voltage
IF
20
14
9
VF
2.0
60
2.9
2.9
80
Power Peak Dissipation
Maximum Reverse Voltage
Dominant Wavelength
PD
80
mW
V
The resistor value can be calculated by
using the formula in the Supplement
Section.
VRM
λd
5
5
5
D
621.5
0.50
522.5
0.50
–25 ~ +50
472.5
0.50
nm
Note: For applications that require
white illumination, contact factory.
Current Reduction Rate Above 25°C
Ambient Temperature Range
∆
mA/°C
°C
IF
TYPICAL SWITCH DIMENSIONS
Common Anode (+)
B(-)
12.0mm Square Cap with RGB LED
Terminal Detail
R(-)
G(-)
(0.5) Typ
.020
(7.62)
.300
(0.6) Typ
.024
(0.3)
.012
(6.4)
.252
(3.6)
.142
(7.62)
.300
(1.3) Dia Typ
.051
1
1a
B(-) (+)
(4.5)
.177
(4.5)
.177
(0.9) DiaTyp
.035
(12.7)
.500
(12.7)
.500
(0.7) Dia Typ
.028
(3.81)
.150
(3.81)
.150
See Terminal
Detail
R(-) G(-)
(1.52) Typ
.060
(1.1)
.043
(0.2)
.008
(1.52) Typ
.060
(12.7)
.500
(6.5) (5.0)
.256 .197
(11.5)
.453
(12.7)
.500
(12.0) Sq
.472
(23.0)
.906
(4.0)
.157
(15.0) Sq
.591
KP0115ACAKG03RGB-1SJB
15.0mm & 17.4mm Square Caps with RGB LED
15.0mm Cap
Common Anode (+)
B(-)
Terminal Detail
R(-)
G(-)
(0.5) Typ
.020
(15.0) Sq
.591
(7.62)
.300
(0.6) Typ
.024
(0.3)
.012
(6.4)
.252
(3.6)
.142
KP0115ANBKG03RGB-2SJB
(7.62)
.300
(1.3) Dia Typ
.051
1
1a
B(-) (+)
(4.5)
.177
(4.5)
.177
(0.9) DiaTyp
.035
(12.7)
.500
(12.7)
.500
(0.7) Dia Typ
.028
(3.81)
.150
(3.81)
.150
See Terminal
Detail
R(-) G(-)
(1.52) Typ
.060
(1.52) Typ
.060
(1.1)
.043
(0.2)
.008
(12.7)
.500
(12.7)
.500
(15.0) Sq
.591
(7.0) (4.5)
(11.5)
.453
.276
.177
(23.0)
.906
(17.4) Sq
.685
(4.0)
.157
KP0115ANBKG03RGB-3SJB
D44
17.4mm Cap
www.nkkswitches.com
Miniature Audio/Video Pushbuttons
Series KP
RECTANGULAR CAP ASSEMBLY
CAP ASSEMBLY DIMENSIONS
(3.6)
.142
(4.5)
.177
Switch/Rectangular Cap Assembly
1
(12.7)
.500
L+
L–
(34.8)
1.370
(7.62)
.300
(2.54)
.100
1a
(0.6)
.024
(0.45) SqTyp
.018
D
(0.3)
.012
(7.0)
.276
(12.7)
.500
(17.4)
.685
(23.0)
.906
(6.0)
.236
(15.0) Sq
.591
KP0115ACBKG03CJB for Tactile
KP0115ANBKG03CJB for Nontactile
See below for complete assembly of switch, LEDs and LED holders.
LED SPECIFICATIONS
The electrical specifications shown are
determined at a basic temperature of 25°C.
Center LED is an integral part of the switch.
LEDs are not sold separately.
LED circuits are isolated and require an
external power source.
(+)
(-)
Red
30
Unit
mA
mA
V
Color
IFM
IF
Maximum Forward Current
Typical Forward Current
Forward Voltage
20
VF
2.0
Maximum Reverse Voltage
Dominant Wavelength
VRM
λd
4
V
If the source voltage exceeds the rated
voltage, a ballast resistor is required.
623
nm
The resistor value can be calculated by us-
ing the formula in the Supplement Section.
Current Reduction Rate Above 25°C
Ambient Temperature Range
∆IF
0.32
–25 ~ +50
mA/°C
°C
Contact factory for other LED colors.
ASSEMBLY & INSTALLATION INSTRUCTIONS
(0.9) Dia Typ
.035
(4.5)
.177
(2.54)
.100
(3.1)Dia
.122
Cathode
(1.3) Dia Typ
.051
LED
(12.7)
.500
1
L+
L–
(12.7) (22.86)
(7.62)
Footprint
.300 .500 .900
1a
(2.54)
.100
(5.9)
.232
LED Holder
(6.7)
.264
(0.8) Dia Typ
.031
(2.54)
.100
(4.8)
.189
(10.4)
.409
(12.7)
.500
LED
LED Holder
1
2
3
Install LED into LED Holder
(quantity 2).
Switch/Rectangular Cap assembly has 3 LEDs
to achieve bright and even illumination.
Solder LEDs and LED Holders
into PCB.
One LED (in center of switch bottom) is an
integral part of the switch; the other 2 LEDs
and 2 LED Holders are packaged separately.
Solder switch into PCB making
sure that the two outer LEDs
and LED Holders clear the bot-
tom side opening of the cap.
Switch
PCB
www.nkkswitches.com
D45
Series KP
Miniature Audio/Video Pushbuttons
ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS
Cap Orientation
ATTENTION
ELECTROSTATIC
SENSITIVE DEVICES
Notch
Tab
Step
As shown in the accompanying illustration, the cap and
plunger are designed with tabs and notches to assure proper
orientation of the cap on the switch.
Plunger
Notches
Removal of Cap Assembly & Separation of Lens & Diffuser
D
Holding the switch tightly, pull the cap off the switch. Once the
cap assembly is released from the plunger, the lens and diffuser can
be separated.
Pry up the lens with fingernail or flat tip screwdriver inserted at
the step on the diffuser.
Installation or Replacement of Cap
Cap
Assembly
Plunger
Switch
After aligning notches with tabs, join the lens and diffuser.
Hold the switch tightly without touching the terminals. Firmly
press the cap onto the plunger by applying pressure from one
side to the other until both are snapped together.
D46
www.nkkswitches.com
Miniature Audio/Video Pushbuttons
Series KP
LEGENDS
NKK Switches can provide custom legends for caps. Contact factory for more information.
Suggested Printable Areas for KP Lens
Lens
Recommended Methods:
Film
ST
OP
Insert
Laser Etch on clear lens, Screen Print, or Pad Print on lens.
Laser Print on film insert.
Epoxy based ink is recommended.
Diffuser
Printing on Diffuser
is not advisable.
D
Shaded areas are suggested printable areas for Lens.
Flat Cap Lens
Rectangular Cap Lens
Sculptured Cap Lens
(28.75)
1.132
(30.28)
1.192
(13.4) Sq
.528
(8.97)Dia
.353
(0.76) Typ
.030
(9.8) Sq
.386
(13.77) Dia
.542
(0.76) Typ
.030
(12.8) Sq
.504
(11.48) Dia
.452
(0.76) Typ
.030
(13.77)
.542
(0.76) Typ
.030
(17.4) Sq
.685
(10.5) Dia
.413
(12.0) Sq
.472
(15.3) Dia
.602
(15.0) Sq
.591
(13.0) Dia
.512
(15.3)
.602
Suggested Printable Areas for KP Film Insert
Shaded areas are suggested printable areas for Film Insert.
Rectangular Film Insert
(0.5) R
.020
(2.125) Typ
.084
Flat Cap Film Inserts
Sculptured or Home Key Cap Film Inserts
(28.75)
1.132
(0.5) R
.020
(0.5) R
.020
(33.0)
1.299
(0.5) R
.020
(0.5) R
.020
(0.5) R
.020
(0.5) R
.020
(11.88) Dia
.468
(0.76) Typ
.030
(11.88) Dia
.468
(0.76) Typ
.030
(8.28) Sq
.326
(0.76) Typ
.030
(0.76) Typ
.030
(8.28)Dia (0.76) Typ
(0.76) Typ
.030
(13.77)
.542
(0.91) Typ
.036
(11.28) Sq
.444
(11.28) Dia
.444
.326
.030
(13.4) Sq
.528
(13.4) Sq
.528
(9.8) Sq
.386
(9.8) Sq
.386
(12.8) Sq
.504
(12.8) Sq
.504
(15.6)
.614
Film Insert Material and Thickness: Clear Polyester; 4 mil (100µ) maximum thickness
www.nkkswitches.com
D47
相关型号:
©2020 ICPDF网 联系我们和版权申明