UB16NBKG035D [NKK]
Low Profile Pushbuttons; 薄型按键型号: | UB16NBKG035D |
厂家: | NIHON KAIHEIKI INDUSTRY CO. LTD. |
描述: | Low Profile Pushbuttons |
文件: | 总9页 (文件大小:365K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low Profile Pushbuttons Series UB
Distinctive Characteristics
Bright or super bright LEDs (an integral part of the switch) of red,
amber, green, blue, or white, in full face or spot illumination
plus square or rectangular models.
Combination of PCB mountability and short body
allows use in compact applications.
Small behind panel dimension for snap-in
mounting in tight spaces.
Snap-acting contact mechanism provides
sensitive actuation with audible feedback;
quick-make, quick-break characteristic
limits arcing and prolongs electrical life.
Latchdown mechanism, independent of
switching mechanism, gives visible and
tactile indication of circuit status.
Terminals are epoxy sealed to lock out flux,
solvents, and other contaminants.
Momentary and alternate action circuits available in the
same space-saving body size.
Nonilluminated models available and shown in Pushbutton section.
Matching indicators available and shown at the end of Section M.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB
General Specifications
Electrical Capacity (Resistive Load)
Power Level (code W):
Logic Level (code G):
5A @ 125/250V AC or 5A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
50 milliohms maximum for silver; 100 milliohms maximum for gold
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
1,000,000 operations minimum for momentary;
Mechanical Life:
Electrical Life:
200,000 operations minimum for alternate action
10,000 operations minimum for silver;
100,000 operations minimum for silver with resistive load of 3A @ 125V AC
200,000 operations minimum for gold
Nominal Operating Force:
Single Pole: 1.9N for Square & 1.9N for Rectangular
Double Pole: 2.55N for Square & 3.1N for Rectangular
Break before make
Contact Timing:
Travel:
Pretravel .067” (1.7mm); Overtravel .024” (0.6mm); Total Travel .091” (2.3mm)
Materials & Finishes
Housing/Bezel:
Glass fiber reinforced polyamide (UL94V-0)
Stainless steel
Snap-in Frame:
Movable Contactor:
Movable Contacts:
Stationary Contacts:
Switch Terminals:
Lamp Terminals:
Base:
Phosphor bronze
Silver alloy or copper with gold plating
Silver alloy or copper with gold plating
Phosphor bronze with silver or gold plating
Brass with silver plating
Glass fiber reinforced liquid crystal polymer (UL94V-0)
Environmental Data
Operating Temp Range:
Humidity:
–25°C through +50°C (–13°F through +122°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
Shock:
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Cap Installation Force:
Soldering Time & Temp:
7.55N (1.70 lbf) maximum downward force on cap
Wave Soldering (PC version): See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Cleaning:
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards:
UL & C-UL Recognized:
UL94V-0 housing/bezel & base
All single & double pole models recognized at 5A @ 125/250V AC or 0.014A @ 28V DC;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch.
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch
All single & double pole models certified at 5A @ 125/250V AC or 5A @ 30V DC or
0.4VA maximum @ 28V AC/DC maximum; CSA File No. 023535-0-000;
add “/C” to end of part number to order CSA mark on switch.
CSA Certified:
R
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB
TYPICAL SWITCH ORDERING EXAMPLE
UB 1 5 SK G 03 5C CC
CAP TYPES & COLORS
POLES
SPDT
1
2
Full Face Illuminated Cap
for Bright LED
DPDT
Lens/Diffuser Colors
CB Red/White
FF Green/Green
*
CC Red/Red
FJ Green/Clear
JB Clear/White
JC Clear/Red
*
*
CJ Red/Clear
DB Amber/White
CIRCUITS
CONTACTS & RATINGS
LEDS
5
ON (ON)
Silver Rated 5A
@ 125/250V AC
W
Bright LED
DD Amber/Amber JD Clear/Amber
( ) = Momentary
ON ON
Gold Rated 0.4VA max
@ 28V AC/DC max
5C
Red
DJ Amber/Clear
FB Green/White
JF Clear/Green
*
JJ Clear/Clear
6
G
5D
5F
Amber
Green
Alternate Action
with Latchdown
* Not available with Rectangular cap
Super Bright LED
Full Face Illuminated Cap
for Super Bright LED
6B
6F
White
Green
Blue
MOUNTING TYPES
PCB Mounting
JB Clear Lens/White Diffuser
TERMINALS
For Square only; see cap detail page
6G
SK Square
Solder Lug (for
01 Snap-in
Available with
Square only
RK Rectangular
* Snap-in Mounting
KK Square
Spot Illuminated Cap
for Bright & Super Bright LEDs
Mounting)
03 Straight PC
AB Black with White Window
Rectangular available for Bright only
NK Rectangular
Rectangular with
NBK
Side Barriers
IMPORTANT:
Switches are supplied without UL, C-UL, & CSA
markings unless specified. Specific models &
ratings noted on General Specifications page.
* Standard with Solder
Lug terminals
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
UB15SKG035C-CC
Red, Bright LED and Red Lens
with Red Diffuser
Gold Contacts with
0.4VA Rating
SPDT ON-(ON) Circuit
Straight PC Terminals
Square with PCB Mounting
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB
POLES & CIRCUITS
Plunger Position
( ) = Momentary
Connected Terminals
Throw & Switch/Lamp Schematics
Notes: Switch is marked with NC, NO, COM, L+ & L–.
Lamp circuit is isolated and requires an external
power source.
Normal
Down
Normal
Down
Pole
Model
1
COM
UB15
*UB16
ON
ON
(ON)
ON
SP
1-3
1-2
SPDT
DPDT
(+)
(-)
3
NC
2
NO
4
1
COM
COM
5
UB25
*UB26
ON
ON
(ON)
ON
DP
1-3 4-6
1-2 4-5
(+)
(-)
3
2
6
NC
NO
NC
NO
* When in latchdown position for the alternate circuit, cap position is .039” (1.0mm) above the housing.
MOUNTING TYPES & SHAPES
PCB Mounting
SK
RK
(5.08)
.200
(2.54) Typ
.100
Square
(5.08) Typ
(2.54) Typ
.100
Rectangular
(7.62)
.300
(2.54) Typ
.100
(7.62) Typ
.300
(2.54) Typ
.100
.200
3
6
3
3
6
3
L +
L +
L -
L +
L +
2
1
(10.16)
.400
5
4
2
1
(10.16)
.400
2
1
2
1
5
4
(10.16)
.400
(10.16)
.400
L -
L -
L -
(1.2) Dia Typ
.047
(1.2) Dia Typ
.047
(1.2) Dia Typ
.047
(1.2) Dia Typ
.047
C
C
C
L
C
L
L
L
Double Pole
Single Pole
Double Pole
Snap-in Mounting (Solder Lug)
Single Pole
Square
with Built-in Bezel
Rectangular
with Built-in Bezel
Rectangular with Built-in
Side Barriers
KK
NK
NBK
(16.2)
.638
(16.2) Sq
.638
(22.4)
.882
Snap-in Mounting with Solder Lug terminals is the standard combination. Panel Thickness: .039 ~ .126” (1.0 ~ 3.2mm)
CONTACT MATERIALS & RATINGS
W
G
Silver Contacts
Gold Contacts
Power Level
5A @ 125V AC & 250V AC
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Complete explanation of operating range in Supplement section.
TERMINALS
(0.2)
.008
(4.0)
.157
(1.0)
.039
(0.2)
01
.008
03
Solder Lug
Straight PC
(5.0)
.197
(1.6)
.063
(2.0)
.079
(0.8)
.032
Thk = (0.5)
.020
Thk = (0.5)
.020
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB
LED COLORS & SPECIFICATIONS
The electrical specifications shown are determined at a basic temperature of 25°C.
LED circuit is isolated and requires external power source. Polarity marks are on the bottom of the switch.
If the source voltage exceeds the rated voltage, a ballast resistor is required.
The resistor value can be calculated by using the formula in the Supplement section.
The LED is an integral part of the switch and not available separately.
Bright
Super Bright
Attention
Super Bright LEDs are
Electrostatic Sensitive
Electrostatic
Sensitive Devices
5C
5D
5F
6B
6F
6G
(+)
(-)
Color
IFM
IF
Red
30
Amber
Green
25
White
25
Green
Blue
25
Unit
mA
Forward Peak Current
30
25
Continuous Forward Current
Forward Voltage
20
20
20
20
20
20
mA
VF
1.85
5
2.0
2.1
5
3.8
5
3.8
3.8
5
V
Reverse Peak Voltage
VRM
∆IF
5
5
V
Current Reduction Rate Above 25°C
Ambient Temperature Range
0.40
0.42
0.46
0.47
0.47
0.47
mA/°C
–25° ~ +50°C
–25° ~ +50°C
CAP TYPES & COLOR COMBINATIONS
Full Face Illuminated Cap for Bright LED
Lens/Diffuser
Lens/Diffuser
Colors Available for Square Cap:
Colors Available for Rectangular Cap:
AT4117
AT4074
CB
CC
CJ
DJ
FB
FF
FJ
JC
JD
JF
JJ
CB
CC
DB
DD
FB
FF
JB
JC
JD
JF
(3.0)
.118
Lens
Lens
(3.0)
.118
(17.0)
.669
(12.0)
.472
(12.0) Sq
.472
(0.5)
.020
AT4075
Diffuser
AT4118
Diffuser
(0.5)
.020
DB
DD
(15.35)
.604
(10.35) Sq
.407
(10.35)
.407
JB
Lens & Diffuser Material: Polycarbonate
Lens Finish: Glossy
Diffuser Finish: Textured
Full Face Illuminated Cap for Super Bright LED
Lens/Diffuser
Colors Available for Square Cap:
Rectangular lens & diffuser are not
available for combining with super
bright LED.
AT4074 Lens & AT4075 Diffuser
(Dimensioned above)
JB
Lens & Diffuser Material: Polycarbonate
Lens Finish: Glossy
Diffuser Finish: Textured
Spot Illuminated Caps
Black Cap with Translucent
AB
AT4119 Square
for Bright and
Super Bright LED
AT4120 Rectangular
White Window for LED Display
(1.9)
.075
(1.9)
.075
(3.1)
for Bright LED
.122
(3.1)
.122
Material: Polycarbonate
Finish: Matte
(5.0)
.197
(5.0)
.197
(3.0)
.118
(3.0)
.118
(17.0)
(12.0)
.669
.472
(12.0) Sq
.472
Color Codes:
A Black
B White
C Red
D Amber
F Green
J Clear
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB
TYPICAL SWITCH DIMENSIONS
Square • PCB Mount
Single & Double Pole
(0.5)
.020
L +
3
6
N.C.
(5.08) Typ
.200
N.C.
(12.0) Sq
.472
2
5
N.O.
COM
N.O.
COM
1
L -
4
(2.54) Typ
.100
(0.5) Typ
.020
(1.0) Typ
(2.5)
.098
(1.0)
.039
.039
(5.08) Typ
.200
(15.24) Sq
.600
(10.0)
.394
(4.0)
.157
Latchdown Position
Single pole models do not have terminals 4, 5, & 6.
UB15SKG035C-CB
Rectangular • PCB Mount
Single & Double Pole
(0.5)
.020
L
+
6
3
(5.08) Typ
.200
N.C.
N.C.
(12.0)
.472
(15.24)
.600
2
N.O.
COM.
5
N.O.
COM
(2.54) Typ
.100
L
-
4
1
(0.5) Typ
.020
(2.5)
(17.0)
.669
.098
(20.32)
.800
(10.0)
.394
(1.0)
.039
(4.0)
.157
(1.0) Typ
.039
(7.62)Typ
.300
Latchdown Position
Single pole models do not have terminals 4, 5, & 6.
UB26RKG035D-DD
Square • Snap-in Mount • Built-in Bezel
Single & Double Pole
(1.4)
.055
(0.8) x (1.6) Typ
.032 x .063
L +
3
6
N.C.
N.C.
(5.08) Typ
.200
(12.0) Sq
.472
(15.8)
.622
5
2
N.O.
N.O.
COM
COM
1
(2.54) Typ
.100
L -
4
(0.5) Typ
.020
(2.5)
.098
(2.0) Typ
.079
(1.0)
.039
(10.0)
.394
(5.0)
.197
(17.8) Sq
.701
(5.08) Typ
.200
Latchdown Position
Single pole models do not have terminals 4, 5, & 6.
UB25KKW015C-CB
Rectangular • Snap-in Mount • Built-in Bezel
Single & Double Pole
(1.4)
.055
(0.8) x (1.6) Typ
.032 x .063
L
+
6
3
(5.08) Typ
.200
N.C.
N.C.
(12.0)
.472
(17.8)
.701
(15.8)
.622
2
N.O.
COM.
5
N.O.
COM
(2.54) Typ
.100
L
-
4
1
(0.5) Typ
.020
(17.0)
.669
(2.5)
.098
(7.62)Typ
.300
(2.0) Typ
.079
(24.0)
.945
(1.0)
.039
(10.0)
.394
(5.0)
.197
(22.0)
.866
Latchdown Position
Single pole models do not have terminals 4, 5, & 6.
UB26NKW015F-FF
Rectangular • Snap-in Mount • Built-in Side Barriers
Single & Double Pole
(0.8) x (1.6) Typ
.032 x .063
L
+
6
3
(5.08) Typ
.200
N.C.
N.C.
(12.0)
.472
(15.8)
.622
2
5
N.O.
N.O.
(17.8)
.701
COM.
COM
(2.54) Typ
.100
L
-
4
1
(0.5) Typ
.020
(2.0) Typ
.079
(17.0)
.669
(7.62)Typ
.300
(24.0)
.945
(22.0)
.866
(8.6)
(5.0)
(3.9)
.154
.339 .197
Single pole models do not have terminals 4, 5, & 6.
UB25NBKW015F-FB
03-07
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Low Profile Pushbuttons Series UB
OPTIONAL ACCESSORIES
Spring Loaded Protective Guard for Snap-in Mounting of Square PCB Model
AT4173
Square Protective Guard/
Snap-in Frame
(10.5)
.413
(15.64)
.616
Opens 180°
Closes automatically
(20.5)
.807
Materials:
Cover: Clear Polycarbonate
Base: Black Polyamide
(18.4)
.724
(6.0)
.236
(9.0)
.354
(20.4)
.803
(15.64)
.616
Coil Spring: Stainless Steel
180°
Recommended
Panel Thickness:
.039” ~ .126”
(18.2) Sq
.717
(1.0mm ~ 3.2mm)
(39.0) Min*
1.535
Protective
Guard
AT4173
Recommended
2
Panel-to-PCB Range:
.354” ~ .433”
(10.5)
.413
Panel
(9.0mm ~ 11.0mm)
(20.5)
.807
Installation
1 Install switch onto
PC board.
2 Snap protective
guard into panel.
3 Join the two
assemblies.
3
Switch
(20.4)
.803
1
PC Board
(20.4)
(9.0) ~ (11.0)
.354 ~ .433
.803 (N)
(N) = Number of switches
* Minimum dimension allows opening of cover to 180°
Spring Loaded Protective Guard for Square Snap-in Model
AT4171
Square
Protective Guard
(10.5)
.413
(17.9)
.705
Opens 180°
Closes automatically
(20.5)
.807
(7.1)
.280
Cap Height
When
Assembled
(18.4)
.724
(14.2)
.559
(7.5)
.295
(20.4)
.803
(17.9)
.705
(16.2) Sq
.638
(39.0) Min*
1.535
AT4171
180°
(10.5)
.413
Materials:
(20.5)
.807
Cover: Clear Polycarbonate
Base: Black GFR Polyamide
Coil Spring: Stainless Steel
(20.4)
.803
Recommended Panel Thickness:
.039” ~ .106” (1.0mm ~ 2.7mm)
(20.4)
.803 (N)
(N) = Number of switches
* Minimum dimension allows opening of cover to 180°
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB
OPTIONAL ACCESSORIES
Spring Loaded Protective Guard for Snap-in Mounting of Rectangular PCB Model
AT4174
Rectangular
Protective Guard/
Snap-in Frame
(10.5)
.413
(15.64)
.616
(20.5)
.807
Opens 180°
Closes automatically
(24.6)
.969
Materials:
(26.6)
1.047
(6.0)
.236
(9.0)
.354
(20.54)
.809
Cover: Clear Polycarbonate
Base: Black Polyamide
Coil Spring: Stainless Steel
(23.4)
.921
180°
Recommended
Panel Thickness:
.039” ~ .126”
(18.2)
.717
(1.0mm ~ 3.2mm)
(39.0) Min*
1.535
Protective
Guard
AT4174
Recommended
Panel-to-PCB Range:
.354” ~ .433”
2
Panel
(10.5)
.413
Installation
(9.0mm ~ 11.0mm)
(20.5)
.807
1 Install switch onto
PC board.
3
Switch
2 Snap protective
guard into panel.
3 Join the two
assemblies.
(26.6)
1.047
1
PC Board
(9.0) ~ (11.0)
.354 ~ .433
(26.6)
1.047 (N)
(N) = Number of switches * Minimum dimension allows opening of cover to 180°
Spring Loaded Protective Guard for Rectangular Snap-in Model
AT4172
Rectangular
Protective Guard
(10.5)
.413
(17.9)
.705
Opens 180°
Closes automatically
(20.5)
.807
(7.1)
.280
Cap Height
When
(24.6)
.969
(20.4)
.803
Assembled
(22.4)
.882
(7.5)
.295
(26.6)
1.047
(24.1)
.949
(16.2)
.638
180°
(39.0) Min*
1.535
AT4172
Materials:
(10.5)
.413
Cover: Clear Polycarbonate
Base: Black GFR Polyamide
Coil Spring: Stainless Steel
(20.5)
.807
Recommended Panel Thickness:
.039” ~ .106” (1.0mm ~ 2.7mm)
(26.6)
1.047
(26.6)
1.047 (N)
(N) = Number of switches * Minimum dimension allows opening of cover to 180°
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB
OPTIONAL ACCESSORIES
Dust Covers
AT4001
Square
Not for use with barrier type models (mounting code NBK)
(16.5)
.650
(15.0) Sq
.591
(16.5)
.650
AT4011
Rectangular
(24.0)
.945
Cap Height
When
Assembled
(2.5)
.098
(22.7)
.894
(7.3)
.287
(24.0) Sq
.945
(30.2)
1.189
Materials:
PVC with polyethylene gasket
(PVC loses pliability below 0°C (32°F).)
Recommended Panel Thickness: .039” ~ .098” (1.0mm ~ 2.5mm)
LEGENDS
Easily create and submit your own legends using our new on-line Legend Maker.
Visit www.nkkswitches.com
LM
For other legend support options, customers may either contact the factory and request the UB/UB2 Legend Packet,
or utilize the general information and basic specifications presented below.
Suggested Printable Area for UB Lens & Film Insert
Recommended Methods: Laser Etch on clear lens, Screen Print or Pad Print on lens; Screen Print on film insert.
Epoxy based ink is recommended.
Square Cap
Shaded areas are printable areas.
Lens
UP
(10.48) (12.0)
.413 .472
Lens
(0.76) Typ
.030
(15.48)
.609
(17.0)
.669
(0.76) Typ
.030
(10.48) Sq
.413
(12.0) Sq
.472
(0.76) Typ
.030
Rectangular Cap
Lens
(0.5) R
.020
(0.5) R
.020
(8.78) (10.3)
.346 .406
Film Insert
Film
Insert
R
U
N
(8.78) Sq
.346
(10.3) Sq
.406
(0.76) Typ
.030
(0.76) Typ
.030
(13.78)
.543
(15.3)
.602
(0.76) Typ
.030
Diffuser
Film Insert: Clear Polyester 4 mil max. thickness
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
相关型号:
©2020 ICPDF网 联系我们和版权申明