UB215KKG01N-4JA [NKK]
Low Profile Pushbuttons; 薄型按键型号: | UB215KKG01N-4JA |
厂家: | NIHON KAIHEIKI INDUSTRY CO. LTD. |
描述: | Low Profile Pushbuttons |
文件: | 总7页 (文件大小:272K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low Profile Pushbuttons Series UB2
Distinctive Characteristics
Combination of PCB mountability and short body allows use in compact
applications.
Small behind panel dimension for snap-in mounting in tight spaces.
Snap-acting contact mechanism provides sensitive actuation
with audible feedback.
Latchdown mechanism, independent of
switching mechanism, gives visible, audible,
and tactile indication of circuit status.
Terminals are epoxy sealed to lock out flux,
solvents, and other contaminants.
Momentary and alternate action circuits
available in the same space-saving body size.
Illuminated models available and shown in Illuminated
Pushbutton section.
Matching indicators available and shown at the end of Section M.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB2
General Specifications
Electrical Capacity (Resistive Load)
Power Level (code W):
Logic Level (code G):
5A @ 125/250V AC or 5A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation in Supplement section.
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
50 milliohms maximum for silver; 100 milliohms maximum for gold
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
1,000,000 operations minimum for momentary;
200,000 operations minimum for alternate action
10,000 operations minimum for silver;
Mechanical Life:
Electrical Life:
200,000 operations minimum for gold
Nominal Operating Force:
Single Pole: 1.90N
Double Pole: 2.55N
Contact Timing:
Travel:
Break before make
Pretravel .067” (1.7mm); Overtravel .024” (0.6mm); Total Travel .091” (2.3mm)
Materials & Finishes
Housing/Bezel:
Snap-in Frame:
Movable Contactor:
Movable Contacts:
Stationary Contacts:
Terminals:
Glass fiber reinforced polyamide (UL94V-0)
Stainless steel
Phosphor bronze
Silver alloy or copper with gold plating
Silver alloy or copper with gold plating
Phosphor bronze with silver or gold plating
Glass fiber reinforced liquid crystal polymer (UL94V-0)
Base:
Environmental Data
Operating Temp Range:
Humidity:
–25°C through +70°C (–4°F through +158°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
Shock:
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Cap Installation Force:
15.0N maximum downward force on cap
Processing
Soldering:
Wave Soldering (PC version): See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Cleaning:
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards:
UL & C-UL Recognized:
UL94V-0 housing/bezel & base
All single & double pole models recognized at 5A @ 125/250V AC or 0.014A @ 28V DC;
UL File No. WOYR2.E44145 & C-UL File No. WOYR8.E44145;
add “/U” to end of part number to order UL mark on switch & add “/U-C” to end of
part number to order C-UL mark on switch (equivalent to CSA certification).
R
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB2
TYPICAL SWITCH ORDERING EXAMPLE
UB2 1 5 SK G 03 N
5C
CONTACTS & RATINGS
CAP TYPES & COLORS
POLES
SPDT
CIRCUITS
Silver Rated 5A
@ 125/250V AC
1
2
5
ON (ON)
Sculptured Cap
Lens/Insert Colors
W
DPDT
( ) = Momentary
ON ON
Gold Rated 0.4VA max
@ 28V AC/DC max
4JA Clear/Black
4JB Clear/White
4JC Clear/Red
6
G
Alternate Action
with Latchdown
4JD Clear/Amber
4JF Clear/Green
MOUNTING TYPES
PCB Mounting
TERMINALS
Beveled Cap
& Colors
Solder Lug (for
Snap-in Mounting)
01
5A
5B
5C
5D
5F
Black
White
Red
SK Square
03 Straight PC
IMPORTANT:
* Snap-in Mounting
KK Square
Switches are supplied without UL
& C-UL marking unless specified.
Specific models & ratings noted on
General Specifications page.
Amber
Green
* Standard with Solder
Lug terminals
Note: Flat Cap with clear
lens and colored
diffuser available;
see Illuminated
Pushbuttons section
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
UB215SKG03N-5C
Red Beveled Cap
Gold Contacts with 0.4VA Rating
SPDT ON-(ON) Circuit
Straight PC Terminals
Square with PCB Mounting
POLES & CIRCUITS
Plunger Position
( ) = Momentary
Connected Terminals
Throw & Schematics
Normal
Down
Normal
Down
Note:
Switch is marked with NC, NO, COM, L+ & L–.
Pole
Model
1
COM
2
UB215
*UB216
ON
ON
(ON)
ON
SP
1-3
1-2
SPDT
DPDT
3
NC
NO
4
1
COM
COM
5
UB225
*UB226
ON
ON
(ON)
ON
DP
1-3 4-6
1-2 4-5
3
2
6
NC
NO
NC
NO
* When in latchdown position for the alternate circuit, cap positions above the housing are:
.059” (1.5mm) for snap-in models & .276” (7.0mm) for PCB models.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB2
MOUNTING TYPES & SHAPES
PCB Mounting
SK
KK
Single Pole
Double Pole
Square
(5.08)
(5.08) Typ
.200
.200
3
6
3
(5.08) Typ
.200
(5.08) Typ
.200
2
1
5
4
2
1
(1.2) Dia Typ
.047
(1.2) Dia Typ
.047
C
C
L
L
Snap-in Mounting (Solder Lug)
Square
with Built-in Bezel
Panel Thickness:
.039 ~ .126”
(1.0 ~ 3.2mm)
(17.4) Sq
.685
CONTACT MATERIALS & RATINGS
W
G
Silver Contacts
Gold Contacts
Power Level
5A @ 125V AC & 250V AC
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Complete explanation of operating range in Supplement section.
TERMINALS
01
03
(0.2)
.008
(4.0)
.157
(1.0)
.039
(0.2)
Solder Lug
Straight PC
.008
(5.0)
.197
(1.6)
.063
(2.0)
.079
(0.8)
.032
Thk = (0.5)
.020
Thk = (0.5)
.020
CAP TYPES & COLOR COMBINATIONS
4
5
AT3073 Sculptured
AT3077 Beveled
(6.1)
.240
(5.6)
.220
Lens/Insert
Colors Available:
Cap
Colors Available:
(15.0) Sq
.591
(15.0) Sq
.591
Clear/
JA
A
Black
Black
Clear/
JB
Clear/
Amber
JD
JF
B
D
F
White
White
Amber
Green
Clear Lens
Opaque
Clear/
Red
Clear/
Green
JC
C
Red
Colored Insert
Material: Polycarbonate
Finish: Glossy
Material: Polycarbonate
Finish: Glossy
Opaque
Colored Cap
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB2
TYPICAL SWITCH DIMENSIONS
Single Pole • PCB Mount
(6.1)
.240
3
2
1
L
L
+
(5.08) Typ
.200
N.C.
(15.0) Sq
.591
N.O.
COM
–
(0.5) Typ
.020
(1.0)
.039
(5.08)
.200
(0.5)
.020
(10.0)
.394
(1.5)
.059
(7.0)
.276
(4.0)
.157
(15.24) Sq
.600
Latchdown Position
UB215SKG03N-4JC
Double Pole • PCB Mount
(6.1)
.240
3
2
6
5
L
+
(5.08) Typ
.200
N.C.
N.O.
N.C.
N.O.
(15.0) Sq
.591
1 COM.
COM.4
L
–
(0.5) Typ
.020
(0.5)
.020
(10.0)
.394
(1.0) Typ
.039
(5.08) Typ
.200
(1.5)
.059
(7.0)
.276
(4.0)
.157
(15.24) Sq
.600
Latchdown Position
UB225SKG03N-4JC
Single Pole • Snap-in Mount • Solder Lug
(0.8) x (1.6) Typ
.032 x .063
(3.0)
.118
3
L
+
(5.08) Typ
.200
N.C.
2
(15.0) Sq
.591
N.O.
1 COM
L
–
(0.5) Typ
.020
(2.0)
.079
(5.08)
.200
(1.4)
.055
(19.0) Sq
.748
(1.5)
.059
(15.5)
.610
(5.0)
.197
Latchdown Position
UB216KKW01N-4JC
Double Pole • Snap-in Mount • Solder Lug
(0.8) x (1.6) Typ
.032 x .063
(3.0)
.118
3
6
L
+
(5.08) Typ
.200
N.C.
2
N.C.
N.O.
5
(15.0) Sq
.591
N.O.
COM.
1
COM.4
L
–
(0.5) Typ
.020
(1.4)
.055
(2.0) Typ
.079
(19.0) Sq
.748
(5.08) Typ
.200
(1.5)
.059
(15.5)
.610
(5.0)
.197
Latchdown Position
UB226KKW01N-4JC
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB2
OPTIONAL ACCESSORIES
Protective Guard for Snap-in Model
AT4141
Opens 90°
Closes manually
(11.1)
.437
(19.1)
.752
Materials:
Cover: Clear Polycarbonate
Base: Black GFR Polyamide
(21.7)
.854
(8.05)
.317
Cap Height
When
Assembled
(19.5)
.768
(21.5)
.846
(16.1)
.634
Recommended Panel Thickness:
.039” ~ .106” (1.0mm ~ 2.7mm)
(6.5)
.256
(19.1)
.752
Spring Loaded Protective Guard for Snap-in Mounting of PCB Model
AT4170
Opens 180°
Closes automatically
(11.1)
.437
(18.1)
.713
Materials:
Cover:
(15.64)
.616
(21.7)
.854
Clear Polycarbonate
Base:
Black Polyamide
Coil Spring:
Stainless Steel
(19.5)
.768
(15.64)
.616
(6.5)
.256
(13.5)
.531
(21.5)
.846
(18.0)
.709
180°
Recommended
Panel Thickness:
.039” ~ .126”
(18.8) Sq
.740
(1.0mm ~ 3.2mm)
(40.0) Min*
1.575
Protective
Guard
Recommended
Panel-to-PCB Range:
.531” ~ .622”
AT4170
Panel
2
(13.5mm ~ 15.8mm)
(21.7)
.854
Installation
1 Install switch onto
PC board.
Switch
3
2 Snap protective
guard into panel.
3 Join the two
assemblies.
PC Board
(21.5)
.846
(13.5) ~ (15.8)
.531 ~ .622
1
(21.5)
.846 (N)
(N) = Number of switches
* Minimum dimension allows opening of cover to 180°
Spring Loaded Protective Guard for Snap-in Model
AT4142
Opens 180°
Closes automatically
(11.1)
.437
(19.1)
.752
Materials:
(21.7)
.854
(8.05)
.317
Cover: Clear Polycarbonate
Base: Black GFR Polyamide
Coil Spring: Stainless Steel
Cap Height
(19.5)
.768
(16.1)
.634
When
Assembled
(21.5)
.846
(6.5)
.256
(19.1)
.752
Recommended Panel Thickness:
.039” ~ .106” (1.0mm ~ 2.7mm)
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Low Profile Pushbuttons Series UB2
OPTIONAL ACCESSORIES
Dust Cover
(17.1)
.673
AT4145 Not for use with barriers.
Materials:
(17.1)
.673
Lid: Clear PVC
(17.0) Sq
.669
Operating temperature range:
0°C ~ +70°C (32°F ~ 158°C).
Gasket: Polyethylene
(17.7)
.697
Cap Height
When
(2.5)
.098
Recommended Panel Thickness
.039” ~ .098” (1.0mm ~ 2.5mm)
(17.7)
.697
Assembled
(6.4)
.252
(25.2) Sq
.992
Barriers for Snap-in Mount
AT4143
End
AT4144
Center
(24.28)
.956
A
(20.07)
.790
(4.1) Typ
.161
(4.8)
.189
(17.4)
.685
(21.0)
.827
(13.3)
.524
End Position
Center Position
Cutouts for more than 1 Switch:
A = .799” (20.3mm) x Number of Switches +
.051” (1.3mm)
(1.2)
.047
(1.2)
.047
Material:
Polyamide
(20.07)
.790
LEGENDS
LM
Easily create and submit your own legends using our new on-line Legend Maker.
Visit www.nkkswitches.com
For other legend support options, customers may either contact the factory and request the UB/UB2 Legend Packet,
or utilize the general information and basic specifications presented below.
Suggested Printable Area for UB Lens
Recommended Methods: Laser Etch on clear lens; Screen Print or Pad Print on lens.
Epoxy based ink is recommended.
Beveled Cap
Sculptured Cap
ON
ON
(0.76) Typ
.030
(9.98) Sq
.393
(12.96) Dia
.510
(0.76) Typ
.030
(11.5) Sq
.453
(14.48) Dia
.570
Shaded areas are printable areas.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
相关型号:
©2020 ICPDF网 联系我们和版权申明