LM431BCM3/N1D [NSC]
IC 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.495 V, PDSO3, SOT-23, 3 PIN, Voltage Reference;型号: | LM431BCM3/N1D |
厂家: | National Semiconductor |
描述: | IC 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.495 V, PDSO3, SOT-23, 3 PIN, Voltage Reference 光电二极管 输出元件 |
文件: | 总15页 (文件大小:350K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
National Semiconductor is now part of
Texas Instruments.
Search http://www.ti.com/ for the latest technical
information and details on our current products and services.
September 2, 2010
LM431
Adjustable Precision Zener Shunt Regulator
General Description
Features
The LM431 is a 3-terminal adjustable shunt regulator with
guaranteed temperature stability over the entire temperature
range of operation. The output voltage may be set at any level
greater than 2.5V (VREF) up to 36V merely by selecting two
external resistors that act as a voltage divided network. Due
to the sharp turn-on characteristics this device is an excellent
replacement for many zener diode applications.
Average temperature coefficient 50 ppm/°C
■
■
Temperature compensated for operation over the full
temperature range
Programmable output voltage
Fast turn-on response
Low output noise
■
■
■
Connection Diagrams
TO-92: Plastic Package
SOT-23: 3-Lead Small Outline
1005528
Top View
1005501
Top View
SO-8: 8-Pin Surface Mount
1005502
Top view
Note: NC = Not internally connected.
© 2010 National Semiconductor Corporation
10055
www.national.com
Ordering Information
Package
Typical Accuracy Order Number/Package Marking
Temperature
Range
Transport
Media
NSC
Drawing
0.5%
1%
2%
TO-92
LM431CCZ/
LM431CCZ
LM431BCZ/
LM431BCZ
LM431ACZ/
LM431ACZ
0°C to +70°C
Rails
Z03A
LM431CIZ/
LM431CIZ
LM431BIZ/
LM431BIZ
LM431AIZ/
LM431AIZ
−40°C to +85°C
SO-8
LM431CCM/
431CCM
LM431BCM/
431BCM
LM431ACM/
LM431ACM
Rails
Tape & Reel
Rails
0°C to +70°C
−40°C to +85°C
0°C to +70°C
LM431CCMX/
431CCM
LM431BCMX/
431BCM
LM431ACMX/
LM431ACM
M08A
LM431CIM/
431CIM
LM431BIM/
431BIM
LM431AIM/
LM431AIM
LM431CIMX/
431CIM
LM431BIMX/
431BIM
LM431AIMX/
LM431AIM
Tape &Reel
Rails
SOT-23
LM431CCM3/
N1B
LM431BCM3/
N1D
LM431ACM3/
N1F
LM431CCM3X/
N1B
LM431BCM3X/
N1D
LM431ACM3X/
N1F
Tape & Reel
Rails
MF03A
LM431CIM3
N1A
LM431BIM3
N1C
LM431AIM3
N1E
−40°C to +85°C
LM431CIM3X
N1A
LM431BIM3X
N1C
LM431AIM3X
N1E
Tape &Reel
Symbol and Functional Diagrams
1005599
1005555
www.national.com
2
DC Test Circuits
1005504
1005505
Note: VZ = VREF (1 + R1/R2) + IREF• R1
FIGURE 1. Test Circuit for VZ = VREF
FIGURE 2. Test Circuit for VZ > VREF
1005506
FIGURE 3. Test Circuit for Off-State Current
3
www.national.com
Absolute Maximum Ratings (Note 1)
Operating Conditions
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Min
Max
37V
Cathode Voltage
Cathode Current
VREF
1.0 mA
100 mA
Storage Temperature Range
Operating Temperature Range
Industrial (LM431xI)
−65°C to +150°C
−40°C to +85°C
0°C to +70°C
Commercial (LM431xC)
Soldering Information
Infrared or Convection (20 sec.)
Wave Soldering (10 sec.)
Cathode Voltage
235°C
260°C (lead temp.)
37V
Continuous Cathode Current
Reference Voltage
−10 mA to +150 mA
−0.5V
Reference Input Current
10 mA
Internal Power Dissipation (Note 2,
Note 3)
ꢀ
0.78W
0.81W
0.28W
TO-92 Package
SO-8 Package
SOT-23 Package
LM431 Electrical Characteristics
TA = 25°C unless otherwise specified
Symbol
VREF
Parameter
Reference Voltage
Conditions
Min
Typ
Max
Units
VZ = VREF, II = 10 mA
2.440
2.495
2.495
2.500
8.0
2.550
V
LM431A (Figure 1 )
VZ = VREF, II = 10 mA
LM431B (Figure 1 )
2.470
2.485
2.520
2.510
17
V
VZ = VREF, II = 10 mA
LM431C (Figure 1 )
VZ = VREF, II = 10 mA,
TA = Full Range (Figure 1 )
V
VDEV
Deviation of Reference Input Voltage Over
Temperature (Note 4)
mV
mV/V
Ratio of the Change in Reference Voltage
to the Change in Cathode Voltage
IZ = 10 mA
VZ from VREF to 10V
VZ from 10V to 36V
−1.4
−1.0
−2.7
−2.0
(Figure 2 )
IREF
Reference Input Current
2.0
4.0
R1 = 10 kΩ, R2 = ∞,
II = 10 mA (Figure 2 )
μA
∝IREF
Deviation of Reference Input Current over
Temperature
R1 = 10 kΩ, R2 = ∞,
II = 10 mA,
0.4
1.2
μA
TA = Full Range (Figure 2 )
VZ = VREF (Figure 1 )
IZ(MIN)
IZ(OFF)
rZ
Minimum Cathode Current for Regulation
Off-State Current
0.4
0.3
1.0
1.0
mA
μA
Ω
VZ = 36V, VREF = 0V (Figure 3)
VZ = VREF, LM431A,
Dynamic Output Impedance (Note 5)
0.75
Frequency = 0 Hz (Figure 1 )
VZ = VREF, LM431B, LM431C
Frequency = 0 Hz (Figure 1 )
0.50
Ω
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device
beyond its rated operating conditions.
Note 2: TJ Max = 150°C.
Note 3: Ratings apply to ambient temperature at 25°C. Above this temperature, derate the TO-92 at 6.2 mW/°C, the SO-8 at 6.5 mW/°C, the SOT-23 at 2.2 mW/
°C.
Note 4: Deviation of reference input voltage, VDEV, is defined as the maximum variation of the reference input voltage over the full temperature range.
www.national.com
4
1005507
The average temperature coefficient of the reference input voltage, ∝VREF, is defined as:
Where:
T2 − T1 = full temperature change (0-70°C).
∝VREF can be positive or negative depending on whether the slope is positive or negative.
Example: VDEV = 8.0 mV, VREF = 2495 mV, T2 − T1 = 70°C, slope is positive.
Note 5: The dynamic output impedance, rZ, is defined as:
When the device is programmed with two external resistors, R1 and R2, (see Figure 2 ), the dynamic output impedance of the overall circuit, rZ, is defined as:
Equivalent Circuit
1005503
5
www.national.com
Typical Performance Characteristics
Input Current vs VZ
Thermal Information
1005529
1005530
Input Current vs VZ
Dynamic Impedance vs Frequency
1005531
1005509
Stability Boundary Conditions
1005510
1005511
Note: The areas under the curves represent conditions that may cause the de-
vice to oscillate. For curves B, C, and D, R2 and V+ were adjusted to establish
the initial VZ and IZ conditions with CL = 0. V+ and CL were then adjusted to de-
termine the ranges of stability.
www.national.com
6
Test Circuit for Curve A Above
Test Circuit for Curves B, C and D Above
1005512
1005513
Typical Applications
Shunt Regulator
1005514
Single Supply Comparator with
Temperature Compensated Threshold
1005515
7
www.national.com
Series Regulator
1005516
Output Control of a Three
Terminal Fixed Regulator
1005517
Higher Current Shunt Regulator
1005518
www.national.com
8
Crow Bar
1005519
Over Voltage/Under Voltage
Protection Circuit
1005520
9
www.national.com
Voltage Monitor
1005521
Delay Timer
1005522
Current Limiter or Current Source
1005523
www.national.com
10
Constant Current Sink
1005524
11
www.national.com
Physical Dimensions inches (millimeters) unless otherwise noted
8-Pin SOIC
NS Package Number M08A
SOT-23 Molded Small Outline Transistor Package (M3)
NS Package Number MF03A
www.national.com
12
NS Package Number Z03A
13
www.national.com
Notes
For more National Semiconductor product information and proven design tools, visit the following Web sites at:
www.national.com
Products
www.national.com/amplifiers
Design Support
www.national.com/webench
Amplifiers
WEBENCH® Tools
App Notes
Audio
www.national.com/audio
www.national.com/timing
www.national.com/adc
www.national.com/interface
www.national.com/lvds
www.national.com/power
www.national.com/appnotes
www.national.com/refdesigns
www.national.com/samples
www.national.com/evalboards
www.national.com/packaging
www.national.com/quality/green
www.national.com/contacts
www.national.com/quality
www.national.com/feedback
www.national.com/easy
Clock and Timing
Data Converters
Interface
Reference Designs
Samples
Eval Boards
LVDS
Packaging
Power Management
Green Compliance
Distributors
Switching Regulators www.national.com/switchers
LDOs
www.national.com/ldo
www.national.com/led
www.national.com/vref
www.national.com/powerwise
Quality and Reliability
Feedback/Support
Design Made Easy
Applications & Markets
Mil/Aero
LED Lighting
Voltage References
PowerWise® Solutions
www.national.com/solutions
www.national.com/milaero
www.national.com/solarmagic
www.national.com/training
Serial Digital Interface (SDI) www.national.com/sdi
Temperature Sensors
PLL/VCO
www.national.com/tempsensors SolarMagic™
www.national.com/wireless
PowerWise® Design
University
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION
(“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY
OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO
SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS,
IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT.
TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT
NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL
PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR
APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND
APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE
NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS.
EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO
LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE
AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected
to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness.
National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other
brand or product names may be trademarks or registered trademarks of their respective holders.
Copyright© 2010 National Semiconductor Corporation
For the most current product information visit us at www.national.com
National Semiconductor
Americas Technical
Support Center
National Semiconductor Europe
Technical Support Center
Email: europe.support@nsc.com
National Semiconductor Asia
Pacific Technical Support Center
Email: ap.support@nsc.com
National Semiconductor Japan
Technical Support Center
Email: jpn.feedback@nsc.com
Email: support@nsc.com
Tel: 1-800-272-9959
www.national.com
相关型号:
LM431BCM3/NOPB
IC 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.495 V, PDSO3, PLASTIC, SOT-23, 3 PIN, Voltage Reference
NSC
LM431BCM3X/N1D
IC 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.495 V, PDSO3, SOT-23, 3 PIN, Voltage Reference
NSC
LM431BCM3X/NOPB
IC 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.495 V, PDSO3, PLASTIC, SOT-23, 3 PIN, Voltage Reference
NSC
©2020 ICPDF网 联系我们和版权申明