HD4.7M25 [NTE]
HIGH-FREQ ALUMINUM ELECTROLYTIC; HIGH- FREQ铝电解
| 型号： | HD4.7M25 |
| 厂家： | 
NTE ELECTRONICS |
| 描述： | HIGH-FREQ ALUMINUM ELECTROLYTIC |
| 文件： | 总1页 (文件大小：14K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HIGH–FREQ ALUMINUM ELECTROLYTIC
HD SERIES
SUBMINIATURE
MECHANICAL SPECIFICATIONS
(Radial Lead, Horizontal Deflection)
Lead Solderability:
The NTE HD series of aluminum electrolytic non–polarized
capacitors are designed specifically for horizontal deflec-
tion current correction where high frequency and high ripple
current occur.
Meets the requirements of MIL–STD 202,
Method 208
Marking:
Consists of series type, nominal capacitance,
rated voltage, temperature range, anode and/or
cathode identification, NTE identification.
RATINGS
Capacitance Range: 1.0µf to 10µf
Tolerance: ±20%
Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petro-
leum ether, propanol and/or commercial deter-
Voltage Range: 25 Volts and 50 Volts
gents.
Halogenated hydrocarbon cleaning
agents such as Freon (MF, TF, or TC), trichloroe-
thylene, trichloroethane, or methylchloride are
not recommended as they may damage the ca-
pacitor.
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
–25°C to +85°C (–13°F to +185°F)
CASE SIZE AND DIMENSIONS:
Leakage Current: I ≤ 0.2CV (measured after
5 minutes of applied rated voltage)
Insulating
Sleeve
15.0 Min
d Ø
I = Leakage Current (µA)
C = Nominal Capacitance (µf)
V = Rated Voltage (V)
A ±0.5
Capacitance Tolerance: ±20% (M)
L’
5.0 Min
D’ Ø
measured at +20°C (+68°F), 1kH
Z
Load Life: 1000 Hrs @ 12V DC, +70°C (+158°F),
HD Series Dimensions:
Diameter (D Ø) x Length (L): mm
at specified ripple current
Leakage Current: Initial specified value or less
Dissipation Factor: < 200% of specified value
Capacitance Change: Within ±15% of initial value
Capacitance
25V and 50V
Ripple Current*
(A
(µf)
)
p–p
1.0
2.2
3.3
4.7
5.6
6.8
8.2
10.0
12.5 x 20
12.5 x 25
16 x 25
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
Shelf Life: 500 Hrs @ +85°C (+185°F),
no voltage applied
Leakage Current: Initial specified value or less
Dissipation Factor: < 200% of specified value
Capacitance Change: Within ±15% of initial value
16 x 31.5
16 x 31.5
16 x 35.5
18 x 35.5
18 x 40
ORDERING INFORMATION
HD
4.7
M
50
* Allowable ripple current @ 70°C, 12V DC, and 15.75kHZ
Series
HD Mechanical Specs: Dimensions (mm)
Capacitance
Tolerance
Voltage
Outside Diameter (D Ø)
Lead Spacing (A)
Lead Wire (d Ø)
12.5
5.0
16
7.5
0.8
18
7.5
0.8
0.6
NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com
9
相关型号：
©2020 ICPDF网 联系我们和版权申明