74HC4067U [NXP]
IC 16-CHANNEL, SGL ENDED MULTIPLEXER, UUC, Multiplexer or Switch;
| 型号： | 74HC4067U |
| 厂家： | 
NXP |
| 描述： | IC 16-CHANNEL, SGL ENDED MULTIPLEXER, UUC, Multiplexer or Switch |
| 文件： | 总15页 (文件大小：121K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
DATA SHEET
For a complete data sheet, please also download:
• The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
• The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
• The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT4067
16-channel analog
multiplexer/demultiplexer
September 1993
Product specification
File under Integrated Circuits, IC06
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
The 74HC/HCT4067 are 16-channel analog
FEATURES
multiplexers/demultiplexers with four address inputs (S0 to
S3) , an active LOW enable input (E), sixteen independent
inputs/outputs (Y0 to Y15) and a common input/output (Z).
The ”4067” contains sixteen bidirectional analog switches,
each with one side connected to an independent
input/output (Y0 to Y15) and the other side connected to a
common input/output (Z).
With E LOW, one of the sixteen switches is selected (low
impedance ON-state) by S0 to S3. All unselected switches
are in the high impedance OFF-state. With E HIGH, all
switches are in the high impedance OFF-state,
independent of S0 to S3.
• Low “ON” resistance:
80 Ω (typ.) at VCC = 4.5 V
70 Ω (typ.) at VCC = 6.0 V
60 Ω (typ.) at VCC = 9.0 V
typical “break before make” built-in
• Output capability: non-standard
• ICC category: MSI
GENERAL DESCRIPTION
The 74HC/HCT4067 are high-speed Si-gate CMOS
devices and are pin compatible with the “4067” of the
“4000B” series. They are specified in compliance with
JEDEC standard no. 7A.
The analog inputs/outputs (Y0 to Y15, and Z) can swing
between VCC as a positive limit and GND as a negative
limit. VCC to GND may not exceed 10 V.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns
TYPICAL
SYMBOL
PARAMETER
CONDITIONS
UNIT
HC
HCT
tPZL/ tPZH turn-on time
E to Vos
CL = 15 pF; RL = 1 kΩ; VCC = 5 V
26
32
ns
Sn to Vos
29
33
ns
t
PLZ/ tPHZ turn-off time
E to Vos
27
29
3.5
29
26
30
3.5
29
ns
ns
pF
pF
Sn to Vos
CI
input capacitance
CPD
CS
power dissipation capacitance per switch notes 1 and 2
max. switch capacitance
independent (Y)
common (Z)
5
5
pF
pF
45
45
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
PD = CPD × VCC2 × fi + ∑ { (CL + CS) × VCC2 × fo} where:
fi = input frequency in MHz
fo = output frequency in MHz
∑ {(CL + CS) × VCC2 × fo} = sum of outputs
CL = output load capacitance in pF
CS = max. switch capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC − 1.5 V
September 1993
2
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”.
PIN DESCRIPTION
PIN NO.
SYMBOL
NAME AND FUNCTION
1
Z
common input/output
9, 8, 7, 6, 5, 4, 3, 2, 23, 22, 21, 20, 19, 18, 17, 16
Y0 to Y15
S0 to S3
GND
E
independent inputs/outputs
address inputs
10, 11, 14, 13
12
15
24
ground (0 V)
enable input (active LOW)
positive supply voltage
VCC
Fig.1 Pin configuration.
Fig.2 Logic symbol.
Fig.3 IEC logic symbol.
September 1993
3
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
APPLICATIONS
• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
FUNCTION TABLE
INPUTS
CHANNEL
ON
E
S3
S2
S1
S0
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
H
L
H
L
Y0 − Z
Y1 − Z
Y2 − Z
Y3 − Z
H
L
L
L
L
L
L
L
L
H
H
H
H
L
L
H
H
L
H
L
Y4 − Z
Y5 − Z
Y6 − Z
Y7 − Z
H
L
L
L
L
H
H
H
H
L
L
L
L
L
L
H
H
L
H
L
Y8 − Z
Y9 − Z
Y
10 − Z
11 − Z
H
Y
L
L
L
L
H
H
H
H
H
H
H
H
L
L
H
H
L
H
L
Y
Y
Y
Y
12 − Z
13 − Z
14 − Z
15 − Z
H
Fig.4 Functional diagram.
H
X
X
X
X
none
Notes
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care
Fig.5 Schematic diagram (one switch).
September 1993
4
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
Fig.6 Logic diagram.
September 1993
5
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134)
Voltages are referenced to GND (ground = 0 V)
SYMBOL
PARAMETER
MIN.
MAX. UNIT CONDITIONS
VCC
±IIK
±ISK
±IS
DC supply voltage
−0.5
+11.0
20
V
DC digital input diode current
DC switch diode current
DC switch current
mA
mA
mA
mA
°C
for VI < −0.5 or VI > VCC + 0.5 V
20
for VS < −0.5 or VS > VCC + 0.5 V
for −0.5 V < VS < VCC + 0.5 V
25
±ICC; ±IGND DC VCC or GND current
50
Tstg
Ptot
storage temperature range
−65
+150
power dissipation per package
for temperature range: −40 to +125 °C
74HC/HCT
plastic DIL
750
500
100
mW
mW
mW
above +70 °C: derate linearly with 12 mW/K
above +70 °C: derate linearly with 8 mW/K
plastic mini-pack (SO)
power dissipation per switch
PS
Note
1. To avoid drawing VCC current out of terminal Z, when switch current flows in terminals Yn, the voltage drop across
the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminal Z, no VCC current will flow out
of terminals Yn. In this case there is no limit for the voltage drop across the switch, but the voltages at Yn and Z may
not exceed VCC or GND.
RECOMMENDED OPERATING CONDITIONS
74HC
74HCT
SYMBOL PARAMETER
UNIT
CONDITIONS
min. typ. max. min. typ. max.
VCC
VI
DC supply voltage
2.0
5.0 10.0 4.5
VCC GND
VCC GND
+85 −40
5.0 5.5
VCC
V
V
V
DC input voltage range
DC switch voltage range
GND
GND
VS
VCC
Tamb
Tamb
operating ambient temperature range −40
operating ambient temperature range −40
+85 °C
see DC and AC
CHARACTER-
ISTICS
+125 −40
+125 °C
tr, tf
input rise and fall times
1000
6.0 500
400
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
VCC = 10.0 V
6.0 500 ns
250
September 1993
6
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
DC CHARACTERISTICS FOR 74HC/HCT
For 74HC:
VCC − GND = 2.0, 4.5, 6.0 and 9.0 V
For 74HCT: VCC − GND = 4.5 V
T
amb (°C)
74HC/HCT
−40 to +85 −40 to +125
min. typ. max. min. max. min. max.
TEST CONDITIONS
SYMBOL PARAMETER
UNIT
VCC
IS
+25
Vis
VI
(V) (µA)
RON
ON-resistance
(peak)
−
−
−
−
Ω
Ω
Ω
Ω
2.0 100
4.5 1000 to or
6.0 1000 GND VIL
9.0 1000
VCC VIH
110
95
75
180
160
130
225
200
165
270
240
195
RON
ON-resistance (rail)
150
90
80
−
−
−
Ω
Ω
Ω
Ω
2.0 100
4.5 1000 or
6.0 1000 VCC VIL
9.0 1000
GND VIH
or
160
140
120
200
175
150
240
210
180
70
∆RON
maximum variation
of ON-resistance
between any two
channels
−
9
8
6
Ω
Ω
Ω
Ω
2.0
4.5
6.0
9.0
VCC VIH
to or
GND VIL
Notes
1. At supply voltages (VCC − GND) approaching 2 V, the analog switch ON-resistance becomes extremely non-linear.
Therefore it is recommended that these devices be used to transmit digital signals only, when using these supply
voltages.
2. For test circuit measuring RON see Fig.7.
Fig.7 Test circuit for measuring ON-resistance (RON).
Fig.8 Test circuit for measuring OFF-state current.
September 1993
7
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
Fig.10 Typical ON-resistance
(RON) as a function of
input voltage (Vis) for
Fig.9 Test circuit for measuring ON-state current.
Vis = 0 to VCC − GND.
DC CHARACTERISTICS FOR 74HC
Voltages are referenced to GND (ground = 0 V)
Tamb (°C)
TEST CONDITIONS
VCC
74HC
SYMBOL PARAMETER
UNIT
VI
OTHER
+25
−40 to +85
−40 to +125
(V)
min. typ. max. min. max. min. max.
VIH
HIGH level input
voltage
1.5
3.15 2.4
4.2
6.3
1.2
1.5
3.15
4.2
6.3
1.5
3.15
4.2
6.3
V
2.0
4.5
6.0
9.0
3.2
4.7
VIL
LOW level input
voltage
0.8 0.50
2.1 1.35
2.8 1.80
4.3 2.70
0.50
1.35
1.80
2.70
0.50
1.35
1.80
2.70
V
2.0
4.5
6.0
9.0
±II
input leakage
current
0.1
0.2
1.0
2.0
1.0
2.0
µA
µA
µA
µA
µA
6.0
10.0 or
GND
VCC
±IS
±IS
±IS
ICC
analog switch
OFF-state current
per channel
0.1
0.8
0.8
1.0
8.0
8.0
1.0
8.0
8.0
10.0 VIH
VS
CC − GND
(see Fig.8)
VS
CC − GND
(see Fig.9)
VS
CC − GND
(see Fig.9)
=
or
VIL
V
analog switch
OFF-state current
all channels
10.0 VIH
=
or
VIL
V
analog switch
ON-state current
10.0 VIH
=
or
VIL
V
quiescent supply
current
8.0
16.0
80.0
160
160
320
6.0
10.0 or
GND
VCC Vis = GND
or VCC
os = VCC
or GND
;
V
September 1993
8
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
AC CHARACTERISTICS FOR 74HC
GND = 0 V; tr = tf = 6 ns; CL = 50 pF
Tamb (°C)
TEST CONDITIONS
74HC
SYMBOL PARAMETER
UNIT
OTHER
VCC
(V)
+25
−40 to +85 −40 to +125
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
25
9
7
75
15
13
9
95
19
16
11
110
22
19
ns
2.0
4.5
6.0
Vis to Vos;
Yn to Z
RL = ∞;
5
14
9.0
CL = 50 pF
(see Fig.16)
t
t
PHL/ tPLH propagation delay
Vis to Vos;
18
6
5
60
12
10
8
75
15
13
10
90
18
15
12
ns
ns
ns
ns
ns
ns
ns
ns
ns
2.0
4.5
6.0
9.0
Z to Yn
4
PHZ/ tPLZ turn-off time
E to Yn
74
27
22
20
250
50
43
315
63
54
375
75
64
2.0
4.5
6.0
9.0
38
48
57
tPHZ/ tPLZ turn-off time
Sn to Yn
83
30
24
21
250
50
43
315
63
54
375
75
64
2.0
4.5
6.0
9.0
38
48
57
t
PHZ/ tPLZ turn-off time
E to Z
85
31
25
24
275
55
47
345
69
59
415
83
71
2.0
4.5
6.0
9.0
42
53
63
tPHZ/ tPLZ turn-off time
Sn to Z
94
34
27
25
290
58
47
365
73
62
435
87
74
2.0
4.5
6.0
RL = 1 kΩ;
CL = 50 pF
(see Fig.17)
45
56
68
9.0
t
t
t
t
PZH/ tPZL turn-on time
E to Yn
80
29
23
17
275
55
47
345
69
59
415
83
71
2.0
4.5
6.0
9.0
42
53
63
PZH/ tPZL turn-on time
Sn to Yn
88
32
26
18
300
60
51
375
75
64
450
90
77
2.0
4.5
6.0
9.0
45
56
68
PZH/ tPZL turn-on time
E to Z
85
31
25
18
275
55
47
345
69
59
415
83
71
2.0
4.5
6.0
9.0
42
53
63
PZH/ tPZL turn-on time
Sn to Z
94
34
27
19
300
60
51
375
75
64
450
90
77
2.0
4.5
6.0
9.0
45
56
68
September 1993
9
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
Note to AC CHARACTERISTICS FOR 74HC
1. Due to higher Z terminal capacitance (16 switches versus 1) the delay figures to the Z terminal are higher than those
to the Y terminal.
DC CHARACTERISTICS FOR 74HCT
Voltages are referenced to GND (ground = 0 V)
Tamb (°C)
TEST CONDITIONS
74HCY
SYMBOL PARAMETER
UNIT
VCC
(V)
+25
−40 to +85 −40 to +125
VI
OTHER
min. typ. max. min. max. min. max.
VIH
VIL
±II
HIGH level input
voltage
2.0
1.6
2.0
2.0
V
4.5
to
5.5
LOW level input
voltage
1.2 0.8
0.1
0.8
1.0
1.0
8.0
8.0
80.0
450
0.8
1.0
1.0
8.0
8.0
160
490
V
4.5
to
5.5
input leakage current
µA
µA
µA
µA
µA
µA
5.5 VCC
or
GND
± IS
±IS
±IS
ICC
∆ICC
analog switch
OFF-state current per
channel
0.1
5.5 VIH
VS
CC − GND
(see Fig.8)
VS
CC − GND
(see Fig.9)
VS
CC − GND
=
or
VIL
V
analog switch
OFF-state current
all channels
0.8
5.5 VIH
=
or
VIL
V
analog switch
ON-state current
0.8
5.5 VIH
=
or
VIL
V
(see Fig.9)
quiescent supply
current
8.0
4.5 VCC
Vis = GND or
VCC; Vos = VCC
to
5.5 GND or GND
4.5 VCC other inputs at
CC or GND
or
additional quiescent
supply current per
input pin for unit load
coefficient is 1
100 360
to
5.5
−2.1
V
V
(note 1)
Note
1. The value of additional quiescent supply current (∆ICC) for a unit load of 1 is given here.
To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below.
INPUT
UNIT LOAD COEFFICIENT
E
Sn
0.6
0.5
September 1993
10
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
AC CHARACTERISTICS FOR 74HCT
GND = 0 V; tr = tf = 6 ns
Tamb (°C)
TEST CONDITIONS
74HCT
SYMBOL PARAMETER
UNIT
OTHER
VCC
(V)
+25
−40 to +85 −40 to +125
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
9
6
15
12
19
15
22
18
ns
ns
4.5
Vis to Vos;
Yn to Z
RL = ∞;
CL = 50 pF
(see Fig.16)
t
t
PHL/ tPLH propagation delay
Vis to Vos;
4.5
Z to Yn
PHZ/ tPLZ turn-off time
E to Yn
26
31
30
35
32
35
38
38
55
55
60
60
60
60
65
65
69
69
75
75
75
75
81
81
83
83
90
90
90
90
98
98
ns
ns
ns
ns
ns
ns
ns
ns
4.5
4.5
4.5
tPHZ/ tPLZ turn-off time
Sn to Yn
t
PHZ/ tPLZ turn-off time
E to Z
tPHZ/ tPLZ turn-off time
Sn to Z
4.5
RL = 1 kΩ;
CL = 50 pF
(see Fig.17)
t
PZH/ tPZL turn-on time
E to Yn
4.5
tPZH/ tPZL turn-on time
Sn to Yn
4.5
4.5
4.5
t
PZH/ tPZL turn-on time
E to Z
tPZH/ tPZL turn-on time
Sn to Z
Note
1. Due to higher Z terminal capacitance (16 switches versus 1) the delay figures to the Z terminal are higher than those
to the Y terminal.
September 1993
11
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
ADDITIONAL AC CHARACTERISTICS FOR 74HC/HCT
Recommended conditions and typical values
GND = 0 V; tr = tf = 6 ns
VCC
(V)
Vis(p-p)
(V)
SYMBOL
PARAMETER
TYP. UNIT
CONDITIONS
sine-wave distortion
f = 1 kHz
0.04
0.02
%
%
4.5
9.0
4.0
8.0
RL = 10 kΩ; CL = 50 pF
(see Fig.14)
sine-wave distortion
f = 10 kHz
0.12
0.06
%
%
4.5
9.0
4.0
8.0
RL = 10 kΩ; CL = 50 pF
(see Fig.14)
switch “OFF” signal
feed-through
−50
−50
dB
dB
4.5
9.0
note 3
RL = 600 Ω; CL = 50 pF
f = 1 MHz (see Figs 11 and 15)
fmax
CS
minimum frequency response 90
MHz
MHz
4.5
9.0
note 4
RL = 50 Ω; CL = 10 pF
(see Figs 12 and 13)
(−3 dB)
100
maximum switch capacitance
independent (Y)
5
pF
pF
common (Z)
45
Notes
1. Vis is the input voltage at Yn or Z terminal, whichever is assigned as an input.
2. Vos is the output voltage at Yn or Z terminal, whichever is assigned as an output.
3. Adjust input voltage Vis is 0 dBm level (0 dBm = 1 mW into 600 Ω).
4. Adjust input voltage Vis is 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50 Ω).
September 1993
12
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
Test conditions:
VCC = 4.5 V; GND = 0 V;
RL = 50 Ω; Rsource = 1 kΩ.
Fig.11 Typical switch ”OFF” signal feed-through as a function of frequency.
Test conditions:
VCC = 4.5 V; GND = 0 V;
RL = 50 Ω; Rsource = 1 kΩ.
Fig.12 Typical frequency response.
Adjust input voltage to obtain
0 dBm at Vos when fin = 1 MHz.
After set-up frequency of fin is
increased to obtain a reading of
−3 dB at Vos
.
Fig.13 Test circuit for measuring minimum frequency response.
September 1993
13
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
Fig.15 Test circuit for measuring switch “OFF”
signal feed-through.
Fig.14 Test circuit for measuring sine-wave
distortion.
AC WAVEFORMS
(1) HC : VM = 50%; VI = GND to VCC
.
HCT : VM = 1.3 V; VI = GND to 3 V.
Fig.17 Waveforms showing the turn-on and
turn-off times.
Fig.16 Waveforms showing the input (Vis) to output
(Vos) propagation delays.
September 1993
14
Philips Semiconductors
Product specification
16-channel analog
multiplexer/demultiplexer
74HC/HCT4067
TEST CIRCUIT AND WAVEFORMS
Conditions
TEST
SWITCH
Vis
tPZH
tPZL
tPHZ
tPLZ
GND
VCC
GND
VCC
VCC
GND
VCC
GND
pulse
others
open
CL
RT
tr
=
=
=
load capacitance including jig and
probe capacitance (see AC
CHARACTERISTICS for values).
termination resistance should be equal
to the output impedance ZO of the
pulse generator.
tf = 6 ns, when measuring fmax, there is
no constraint on tr, tf with 50% duty
factor.
Fig.18 Test circuit for measuring AC performance.
tr, tf
AMPLI-
TUDE
FAMILY
VM
fmax
;
OTHER
PULSE WIDTH
74HC
VCC
50% < 2 ns
1.3 V < 2 ns
6 ns
6 ns
74HCT
3.0 V
Fig.19 Input pulse definitions.
PACKAGE OUTLINES
See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.
September 1993
15
相关型号：
©2020 ICPDF网 联系我们和版权申明