74LVC162244ADL [NXP]
16-bit buffer/line driver; with 30ohm series termination resistors, 5V input/output tolerant 3-State; 16位缓冲器/线路驱动器;与30ohm系列终端电阻, 5V输入/输出宽容三态型号: | 74LVC162244ADL |
厂家: | NXP |
描述: | 16-bit buffer/line driver; with 30ohm series termination resistors, 5V input/output tolerant 3-State |
文件: | 总16页 (文件大小:103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
DATA SHEET
74LVC162244A; 74LVCH162244A
16-bit buffer/line driver, 30 Ω series
termination resistors; 5 V tolerant
input/output; 3-state
Product specification
2003 Dec 12
Supersedes data of 1998 Feb 17
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
FEATURES
DESCRIPTION
• 5 V tolerant inputs/outputs for interfacing with 5 V logic
• Wide supply voltage range from 1.2 to 3.6 V
• CMOS low power consumption
The 74LVC(H)162244A is a high-performance, low power,
low voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families. Inputs can be
driven from either 3.3 or 5 V devices. In 3-state operation,
outputs can handle 5 V. These features allow the use of
these devices as a mixed 3.3 and 5 V environment.
• MULTIBYTE flow-through standard pin-out architecture
• Low inductance multiple power and ground pins for
minimum noise and ground bounce
The 74LVC(H)162244A is a 16-bit non-inverting buffer/line
driver with 3-state outputs. The device can be used as four
4-bit buffers, two 8-bit buffers or one 16-bit buffer. The
3-state outputs are controlled by the output enable inputs
1OE, 2OE, 3OE and 4OE. A HIGH on nOE causes the
outputs to assume a high-impedance OFF-state.
• Direct interface with TTL levels
• Inputs accept voltages up to 5.5 V
• Integrated 30 Ω termination resistors
• All data inputs have bushold (74LVCH162244A only)
• Complies with JEDEC standard no. 8-1A
The 74LVCH162244A bushold data inputs eliminates the
need for external termination resistors to hold unused
inputs.
• ESD protection:
HBM EIA/JESD22-A114-A exceeds 2000 V
MM EIA/JESD22-A115-A exceeds 200 V.
The 74LVC(H)162244A is designed with 30 Ω series
termination resistors in both HIGH and LOW output stages
to reduce line noise.
• Specified from −40 to +85 °C and −40 to +125 °C.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf ≤ 2.5 ns.
SYMBOL
PARAMETER
CONDITIONS
CL = 50 pF; VCC = 3.3 V
CL = 50 pF; VCC = 3.3 V
TYPICAL
3.0
UNIT
tPHL/tPLH
tPZH/tPZL
tPHZ/tPLZ
CI
propagation delay nAn to nYn
3-state output enable time nOE to nYn
ns
ns
ns
pF
3.5
2.8
5.0
3-state output disable time nOE to nYn CL = 50 pF; VCC = 3.3 V
input capacitance
CPD
power dissipation capacitance per gate VCC = 3.3 V; notes 1 and 2
outputs enabled
outputs disabled
12
pF
pF
4.0
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in Volts;
N = total load switching outputs;
Σ(CL × VCC2 × fo) = sum of the outputs.
2. The condition is VI = GND to VCC
.
2003 Dec 12
2
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
ORDERING INFORMATION
PACKAGE
PINS PACKAGE MATERIAL
TYPE NUMBER
TEMPERATURE
CODE
RANGE
74LVC162244ADL
−40 to +125 °C
−40 to +125 °C
−40 to +125 °C
−40 to +125 °C
48
48
48
48
SSOP48
plastic
plastic
plastic
plastic
SOT370-1
SOT370-1
SOT362-1
SOT362-1
74LVCH162244ADL
74LVC162244ADGG
74LVCH162244ADGG
SSOP48
TSSOP48
TSSOP48
FUNCTION TABLE
See note 1.
INPUT
OUTPUT
nOE
nAn
nYn
L
L
L
L
H
X
H
H
Z
Note
1. H = HIGH voltage level;
L = LOW voltage level;
X = don’t care;
Z = high-impedance OFF-state.
2003 Dec 12
3
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
PINNING
PIN
SYMBOL
2A2
DESCRIPTION
PIN
SYMBOL
1OE
DESCRIPTION
38
39
40
41
42
43
44
45
46
47
48
data input
ground (0 V)
data input
data input
supply voltage
data input
data input
ground (0 V)
data input
data input
1
output enable input
(active LOW)
GND
2A1
2A0
VCC
1A3
1A2
GND
1A1
1A0
2OE
2
1Y0
1Y1
GND
1Y2
1Y3
VCC
2Y0
2Y1
GND
2Y2
2Y3
3Y0
3Y1
GND
3Y2
3Y3
VCC
4Y0
4Y1
GND
4Y2
4Y3
4OE
data output
data output
ground (0 V)
data output
data output
supply voltage
data output
data output
ground (0 V)
data output
data output
data output
data output
ground (0 V)
data output
data output
supply voltage
data output
data output
ground (0 V)
data output
data output
3
4
5
6
7
8
9
output enable input
(active LOW)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
2
3
4
5
6
7
8
9
48 2OE
47 1A0
46 1A1
45 GND
44 1A2
43 1A3
V
1OE
1Y0
1Y1
GND
1Y2
1Y3
V
42
41
40
39
38
37
CC
2A0
2A1
GND
2A2
2A3
CC
2Y0
2Y1
GND 10
2Y2 11
2Y3 12
output enable input
(active LOW)
162244A
13
14
15
16
17
18
19
20
21
22
23
24
36 3A0
35 3A1
34 GND
33 3A2
32 3A3
3Y0
3Y1
GND
3Y2
3Y3
25
3OE
output enable input
(active LOW)
26
27
28
29
30
31
32
33
34
35
36
37
4A3
4A2
GND
4A1
4A0
VCC
3A3
3A2
GND
3A1
3A0
2A3
data input
data input
ground (0 V)
data input
data input
supply voltage
data input
data input
ground (0 V)
data input
data input
data input
V
31
V
CC
CC
30 4A0
29 4A1
28 GND
27 4A2
26 4A3
4Y0
4Y1
GND
4Y2
4Y3
25
3OE
4OE
001aaa252
Fig.1 Pin configuration.
2003 Dec 12
4
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
2
3
5
6
13
14
16
17
47
36
35
33
handbook, halfpage
1
48
25
24
1A0
1Y0
1Y1
1Y2
1Y3
3A0
3A1
3A2
3Y0
3Y1
3Y2
3Y3
1EN
2EN
3EN
4EN
1OE
2OE
3OE
4OE
46
1A1
44
2
47
46
44
43
41
40
38
37
36
35
33
32
30
29
27
26
1A2
1A0
1A1
1A2
1A3
2A0
2A1
2A2
2A3
3A0
3A1
3A2
3A3
4A0
4A1
4A2
4A3
1Y0
1Y1
1Y2
1Y3
2Y0
2Y1
2Y2
2Y3
3Y0
3Y1
3Y2
3Y3
4Y0
4Y1
4Y2
4Y3
1
1
1
1
1
2
3
3
5
43
32
25
1A3
3A3
6
1
8
1OE
3OE
9
11
12
13
14
16
17
19
20
22
23
8
19
20
22
23
41
30
29
27
2A0
2Y0
2Y1
2Y2
2Y3
4A0
4A1
4A2
4Y0
4Y1
4Y2
4Y3
40
9
2A1
11
12
38
2A2
4
37
26
24
2A3
4A3
48
2OE
4OE
mna704
MNA996
Fig.2 Logic symbol.
Fig.3 Logic symbol (IEEE/IEC).
V
handbook, halfpage
CC
data input
to internal circuit
MNA705
Fig.4 Bushold circuit.
5
2003 Dec 12
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
supply voltage
CONDITIONS
MIN.
2.7
MAX.
3.6
UNIT
VCC
for maximum speed performance
for low voltage applications
V
1.2
0
3.6
V
VI
input voltage
5.5
V
VO
output voltage
output HIGH or LOW state
output 3-state
0
VCC
5.5
V
0
V
Tamb
tr, tf
operating ambient
temperature
in free air
−40
+125
°C
input rise and fall times
VCC = 1.2 to 2.7 V
VCC = 2.7 to 3.6 V
0
0
20
10
ns/V
ns/V
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V).
SYMBOL
PARAMETER
supply voltage
CONDITIONS
MIN.
−0.5
MAX.
+6.5
UNIT
VCC
IIK
V
input diode current
input voltage
VI < 0
note 1
−
−50
mA
V
VI
−0.5
−
+6.5
±50
IOK
VO
output diode current
output voltage
VO > VCC or VO < 0
mA
V
output HIGH or LOW state; note 1 −0.5
VCC + 0.5
+6.5
±50
output 3-state; note 1
−0.5
−
V
IO
output source or sink current VO = 0 to VCC
VCC or GND current
mA
mA
°C
mW
ICC, IGND
Tstg
−
±100
+150
500
storage temperature
−65
−
Ptot
power dissipation
Tamb = −40 to +125 °C; note 2
Notes
1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. Above 60 °C the value of Ptot derates linearly with 5.5 mW/K.
2003 Dec 12
6
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
DC CHARACTERISTICS
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
TEST CONDITIONS
SYMBOL
PARAMETER
MIN.
TYP.
MAX.
UNIT
OTHER
VCC (V)
Tamb = −40 to +85 °C; note 1
VIH
VIL
HIGH-level input voltage
1.2
VCC
−
−
−
−
−
V
2.7 to 3.6
1.2
2.0
−
−
V
V
V
LOW-level input voltage
GND
0.8
2.7 to 3.6
−
VOH
HIGH-level output voltage VI = VIH or VIL
(2)
IO = −100 µA
IO = −6 mA
IO = −12 mA
2.7 to 3.6
2.7
V
V
V
CC − 0.2
VCC
−
−
−
−
V
V
V
CC − 0.5
CC − 0.8
3.0
−
VOL
LOW-level output voltage
input leakage current
VI = VIH or VIL
IO = 100 µA
IO = 6 mA
2.7 to 3.6
2.7
−
−
−
−
GND(2) 0.20
V
−
0.40
0.55
±5
V
IO = 12 mA
3.0
−
V
ILI
VI = 5.5 V or GND;
note 3
3.6
±0.1
µA
IOZ
3-state output OFF-state
current
VI = VIH or VIL;
VO = 5.5 V or GND;
note 3
3.6
−
±0.1
±5
µA
Ioff
power off leakage supply
current
VI or VO = 5.5 V
0.0
−
−
−
±0.1
0.1
5(2)
−
±10
20
500
−
µA
µA
µA
µA
µA
µA
µA
ICC
quiescent supply current
VI = VCC or GND;
IO = 0
3.6
∆ICC
IBHL
IBHH
IBHLO
IBHHO
additional quiescent supply VI = VCC − 0.6 V;
current per input pin
2.7 to 3.6
3.0
IO = 0
bushold LOW sustaining
current
VI = 0.8 V; notes 4
and 5
75
bushold HIGH sustaining
current
VI = 2.0 V; notes 4
and 5
3.0
−75
500
−500
−
−
bushold LOW overdrive
current
notes 4 and 6
3.6
−
−
bushold HIGH overdrive
current
notes 4 and 6
3.6
−
−
2003 Dec 12
7
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
TEST CONDITIONS
SYMBOL
PARAMETER
MIN.
TYP.
MAX.
UNIT
OTHER
VCC (V)
Tamb = −40 to +125 °C
VIH
HIGH-level input voltage
LOW-level input voltage
1.2
VCC
−
−
−
−
−
V
2.7 to 3.6
1.2
2.0
−
−
V
V
V
VIL
GND
0.8
2.7 to 3.6
−
VOH
HIGH-level output voltage VI = VIH or VIL
IO = −100 µA
IO = −6 mA
IO = −12 mA
2.7 to 3.6
2.7
V
V
V
CC − 0.3
−
−
−
−
−
−
V
V
V
CC − 0.65
CC − 1
3.0
VOL
LOW-level output voltage
input leakage current
VI = VIH or VIL
IO = 100 µA
IO = 6 mA
2.7 to 3.6
2.7
−
−
−
−
−
−
−
−
0.3
0.6
0.8
±20
V
V
IO = 12 mA
3.0
V
ILI
VI = 5.5 V or GND;
note 3
3.6
µA
IOZ
3-state output OFF-state
current
VI = VIH or VIL;
VO = 5.5 V or GND;
note 3
3.6
−
−
±20
µA
Ioff
power off leakage supply
current
VI or VO = 5.5 V
0.0
−
−
−
−
−
−
−
−
−
−
±20
80
5000
−
µA
µA
µA
µA
µA
µA
µA
ICC
quiescent supply current
VI = VCC or GND;
IO = 0
3.6
∆ICC
IBHL
IBHH
IBHLO
IBHHO
additional quiescent supply VI = VCC − 0.6 V;
current per input pin
2.7 to 3.6
3.0
IO = 0
bushold LOW sustaining
current
VI = 0.8 V; notes 4
and 5
60
bushold HIGH sustaining
current
VI = 2.0 V; notes 4
and 5
3.0
−60
500
−500
−
bushold LOW overdrive
current
notes 4 and 6
3.6
−
bushold HIGH overdrive
current
notes 4 and 6
3.6
−
Notes
1. All typical values are measured Tamb = 25 °C.
2. Value is measured at VCC = 3.3 V.
3. For bushold parts, the bushold circuit is switched off when VI > VCC allowing 5.5 V on the input terminal.
4. Valid for data inputs of bushold parts (LVCH162244A) only. For data inputs only, control inputs do not have a bushold
circuit.
5. The specified sustaining current at the data input holds the input below the specified VI level.
6. The specified overdrive current at the data input forces the data input to the opposite logic input state.
2003 Dec 12
8
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
AC CHARACTERISTICS
GND = 0 V; tr = tf ≤ 2.5 ns; CL = 50 pF; RL = 500 Ω.
CONDITIONS
SYMBOL
PARAMETER
MIN.
TYP. MAX. UNIT
WAVEFORMS
VCC (V)
Tamb = −40 to +85 °C; note1
tPHL/tPLH propagation delay nAn to nYn
see Figs 5 and 7
1.2
2.7
−
11.0
−
ns
ns
ns
ns
ns
ns
ns
ns
ns
1.0
−
6.7
3.0 to 3.6 1.0
3.0(2) 5.8
tPZH/tPZL
3-state output enable time nOE to nYn see Figs 6 and 7
3-state output disable time nOE to nYn see Figs 6 and 7
1.2
2.7
−
15.0
−
1.5
−
7.6
3.0 to 3.6 1.0
3.5(2) 6.0
tPHZ/tPLZ
1.2
2.7
−
10.0
−
1.5
−
4.7
3.0 to 3.6 1.5
2.8(2) 4.5
Tamb = −40 to +125 °C
tPHL/tPLH propagation delay nAn to nYn
see Figs 5 and 7
1.2
2.7
−
−
−
−
−
−
−
−
−
−
−
ns
ns
ns
ns
ns
ns
ns
ns
ns
1.0
8.5
7.5
−
3.0 to 3.6 1.0
tPZH/tPZL
3-state output enable time nOE to nYn see Figs 6 and 7
3-state output disable time nOE to nYn see Figs 6 and 7
1.2
2.7
−
1.5
9.5
7.5
−
3.0 to 3.6 1.0
tPHZ/tPLZ
1.2
2.7
−
1.5
6.0
6.0
3.0 to 3.6 1.5
Notes
1. All typical values are measured at Tamb = 25 °C.
2. Value is measured at VCC = 3.3 V.
2003 Dec 12
9
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
AC WAVEFORMS
V
handbook, halfpage
nAn input
I
V
V
M
M
GND
t
t
PLH
PHL
V
OH
V
V
M
nYn output
M
V
OL
MNA171
INPUT
VCC
VM
VI
tr = tf
1.2 V
2.7 V
0.5 × VCC VCC
≤ 2.5 ns
≤ 2.5 ns
≤ 2.5 ns
1.5 V
1.5 V
2.7 V
2.7 V
3.0 to 3.6 V
VOL and VOH are typical output voltage drop that occur with the output load.
Fig.5 The input nAn to output nYn propagation delays.
2003 Dec 12
10
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
V
I
nOE input
V
M
GND
t
t
PZL
PLZ
V
CC
output
LOW-to-OFF
OFF-to-LOW
V
M
V
X
V
OL
t
t
PHZ
PZH
V
OH
V
Y
output
HIGH-to-OFF
OFF-to-HIGH
V
M
GND
outputs
enabled
outputs
enabled
outputs
disabled
MNA362
INPUT
VCC
VM
0.5 × VCC VCC
VI
tr = tf
VX = VOL + 0.3 V at VCC ≥ 2.7 V;
VX = VOL + 0.1 V at VCC < 2.7 V;
VY = VOH − 0.3 V at VCC ≥ 2.7 V;
VY = VOH − 0.1 V at VCC < 2.7 V.
1.2 V
≤ 2.5 ns
≤ 2.5 ns
≤ 2.5 ns
2.7 V
1.5 V
1.5 V
2.7 V
2.7 V
3.0 to 3.6 V
VOL and VOH are typical output voltage drop that occur with the output load.
Fig.6 3-state enable and disable times.
2003 Dec 12
11
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
V
EXT
V
CC
R
L
V
V
O
I
PULSE
GENERATOR
D.U.T.
C
R
R
L
L
T
MNA616
VEXT
tPLH/tPHL tPZH/tPHZ tPZL/tPLZ
VCC
VI
VCC
CL
RL
1.2 V
2.7 V
50 pF
50 pF
50 pF
500 Ω(1) open
GND
GND
GND
2 × VCC
2 × VCC
2 × VCC
2.7 V
2.7 V
500 Ω
500 Ω
open
open
3.0 to 3.6 V
Note
1. The circuit performs better when RL = 1000 Ω.
Definitions for test circuits:
R
L = Load resistor.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig.7 Load circuitry for switching times.
2003 Dec 12
12
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
PACKAGE OUTLINES
SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm
SOT370-1
D
E
A
X
c
y
H
v
M
A
E
Z
25
48
Q
A
2
A
A
(A )
3
1
θ
pin 1 index
L
p
L
24
1
detail X
w
M
b
p
e
0
5
10 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(1)
(1)
UNIT
A
A
A
b
c
D
E
e
H
E
L
L
Q
v
w
y
Z
θ
p
p
1
2
3
max.
8o
0o
0.4
0.2
2.35
2.20
0.3
0.2
0.22 16.00
0.13 15.75
7.6
7.4
10.4
10.1
1.0
0.6
1.2
1.0
0.85
0.40
mm
2.8
0.25
0.635
1.4
0.25
0.18
0.1
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-19
SOT370-1
MO-118
2003 Dec 12
13
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1 mm
SOT362-1
E
D
A
X
c
H
v
M
A
y
E
Z
48
25
Q
A
2
(A )
3
A
A
1
pin 1 index
θ
L
p
L
detail X
1
24
w
M
b
e
p
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions).
A
(1)
(2)
UNIT
A
A
A
b
c
D
E
e
H
L
L
p
Q
v
w
y
Z
θ
1
2
3
p
E
max.
8o
0o
0.15
0.05
1.05
0.85
0.28
0.17
0.2
0.1
12.6
12.4
6.2
6.0
8.3
7.9
0.8
0.4
0.50
0.35
0.8
0.4
mm
1.2
0.5
1
0.25
0.25
0.08
0.1
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-19
SOT362-1
MO-153
2003 Dec 12
14
Philips Semiconductors
Product specification
16-bit buffer/line driver, 30 Ω series termination
resistors; 5 V tolerant input/output; 3-state
74LVC162244A;
74LVCH162244A
DATA SHEET STATUS
DATA SHEET
STATUS(1)
PRODUCT
STATUS(2)(3)
LEVEL
DEFINITION
I
Objective data
Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
II
Preliminary data Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III
Product data
Production
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
DEFINITIONS
DISCLAIMERS
Short-form specification
The data in a short-form
Life support applications
These products are not
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes
Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
Application information
Applications that are
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2003 Dec 12
15
Philips Semiconductors – a worldwide company
Contact information
For additional information please visit http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
© Koninklijke Philips Electronics N.V. 2003
SCA75
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
R20/04/pp16
Date of release: 2003 Dec 12
Document order number: 9397 750 12455
相关型号:
74LVC162244ADL-T
IC LVC/LCX/Z SERIES, QUAD 4-BIT DRIVER, TRUE OUTPUT, PDSO48, PLASTIC, SSOP3-48, Bus Driver/Transceiver
NXP
74LVC162244APA8
Bus Driver, LVC/LCX/Z Series, 4-Func, 4-Bit, True Output, CMOS, PDSO48, TSSOP-48
IDT
74LVC162244APF8
Bus Driver, LVC/LCX/Z Series, 4-Func, 4-Bit, True Output, CMOS, PDSO48, TVSOP-48
IDT
©2020 ICPDF网 联系我们和版权申明