74LVC162245 [NXP]
16-bit bus transceiver with direction pin; 30ohm series termination resistors; 5V Input/Outputs tolerant 3-State; 16位总线收发器的方向针; 30ohm系列终端电阻; 5V输入/输出宽容三态
| 型号： | 74LVC162245 |
| 厂家： | 
NXP |
| 描述： | 16-bit bus transceiver with direction pin; 30ohm series termination resistors; 5V Input/Outputs tolerant 3-State |
| 文件： | 总17页 (文件大小：110K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
DATA SHEET
74LVC162245A; 74LVCH162245A
16-bit transceiver with direction pin;
30 Ω series termination resistors;
5 V tolerant input/output; 3-state
Product specification
2003 Dec 08
Supersedes data of 1998 Feb 17
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
74LVC162245A;
termination resistors; 5 V tolerant input/output; 3-state 74LVCH162245A
FEATURES
DESCRIPTION
• 5 V tolerant inputs/outputs for interfacing with 5 V logic
• Wide supply voltage range from 1.2 to 3.6 V
• CMOS low power consumption
The 74LVC(H)162245A is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3 or 5 V devices. In
3-state operation, outputs can handle 5 V. These features
allow the use of these devices as translators in a mixed
3.3 and 5 V environment.
• MULTIBYTETM flow-through standard pin-out
architecture
• Low inductance multiple power and ground pins for
minimum noise and ground bounce
The 74LVC(H)162245A is a 16-bit transceiver featuring
non-inverting 3-state bus compatible outputs in both send
and receive directions.
• Direct interface with TTL levels
• Inputs accept voltages up to 5.5 V
• Integrated 30 Ω termination resistors
• High-impedance when VCC = 0 V
The 74LVC(H)162245A features two output enable (nOE)
inputs for easy cascading and two send/receive (nDIR)
inputs for direction control. nOE controls the outputs so
that the buses are effectively isolated. This device can be
used as two 8-bit transceivers or one 16-bit transceiver.
• All data inputs have bushold (74LVCH162245A only)
• Complies with JEDEC standard no. 8-1A
• ESD protection:
HBM EIA/JESD22-A114-A exceeds 2000 V
MM EIA/JESD22-A115-A exceeds 200 V.
The 74LVCH162245A bushold data inputs eliminates the
need for external pull-up resistors to hold unused inputs.
The 74LVC(H)162245A is designed with 30 Ω series
termination resistors in both HIGH and LOW output stages
to reduce line noise.
• Specified from −40 to +85 °C and −40 to +125 °C.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf ≤ 2.5 ns.
SYMBOL
PARAMETER
CONDITIONS
TYPICAL
3.3
UNIT
tPHL/tPLH
CI
propagation delay nAn to nBn; nBn to nAn
input capacitance
CL = 50 pF; VCC = 3.3 V
ns
pF
pF
pF
5.0
10
CI/O
input/output capacitance
CPD
power dissipation capacitance
VCC = 3.3 V; notes 1 and 2 28
Note
1. CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in Volts;
N = total load switching outputs;
Σ(CL × VCC2 × fo) = sum of the outputs.
2. The condition is VI = GND to VCC
.
2003 Dec 08
2
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
FUNCTION TABLE
See note 1.
INPUT
OUTPUT
nOE
L
nDIR
nAn
nBn
L
H
X
A = B
inputs
Z
inputs
B = A
Z
L
H
Note
1. H = HIGH voltage level;
L = LOW voltage level;
X = don’t care;
Z = high-impedance OFF-state.
ORDERING INFORMATION
TYPE NUMBER
PACKAGE
TEMPERATURE RANGE
−40 to +125 °C
PINS
PACKAGE
SSOP48
MATERIAL
CODE
74LVC162245ADL
48
48
48
48
plastic
plastic
plastic
plastic
SOT370-1
SOT370-1
SOT362-1
SOT362-1
74LVCH162245ADL
74LVC162245ADGG
74LVCH162245ADGG
−40 to +125 °C
SSOP48
−40 to +125 °C
TSSOP48
TSSOP48
−40 to +125 °C
2003 Dec 08
3
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
PINNING
SYMBOL
PIN
DESCRIPTION
SYMBOL
PIN
DESCRIPTION
1A5
1A4
1A3
1A2
1A1
1A0
1OE
40
41
43
44
46
47
48
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
1DIR
n.c.
1
−
2
3
direction control input
not connected
1B0
1B1
GND
data input/output
data input/output
4, 10, 15, 21, 28, ground (0 V)
34, 39, 45
output enable input
(active LOW)
1B2
1B3
VCC
1B4
1B5
1B6
1B7
2B0
2B1
2B2
2B3
2B4
2B5
2B6
2B7
2DIR
2OE
5
data input/output
6
data input/output
supply voltage
7, 18, 31, 42
8
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
direction control input
1OE
48
1DIR
1
9
1A0
47
1B0
1B1
GND
1B2
1B3
2
3
11
12
13
14
16
17
19
20
22
23
24
25
1A1
46
GND
45
4
1A2
44
5
1A3
43
6
V
V
CC
7
42
41
40
39
38
37
36
35
34
33
32
31
CC
1A4
1A5
GND
1A6
1A7
2A0
2A1
GND
2A2
2A3
1B4
1B5
GND
1B6
1B7
2B0
2B1
GND
2B2
2B3
8
9
10
11
12
13
14
15
16
17
18
162245
output enable input
(active LOW)
V
CC
V
CC
2A7
2A6
2A5
2A4
2A3
2A2
2A1
2A0
1A7
1A6
26
27
29
30
32
33
35
36
37
38
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
data input/output
2B4 19
2B5 20
GND 21
2B6 22
2B7 23
2DIR 24
30 2A4
29 2A5
28 GND
27 2A6
26 2A7
25 2OE
001aaa156
Fig.1 Pin configuration SSOP48 and TSSOP48.
2003 Dec 08
4
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
1
24
1DIR
2DIR
48
2
25
1OE
1B0
2OE
47
46
44
43
41
40
38
37
36
35
33
32
30
29
27
26
1A0
1A1
1A2
1A3
1A4
1A5
1A6
1A7
2A0
2A1
2A2
2A3
2A4
2A5
2A6
2A7
13
2B0
3
14
1B1
1B2
1B3
1B4
1B5
1B6
1B7
2B1
5
16
2B2
6
17
2B3
8
19
2B4
9
20
2B5
11
12
22
2B6
23
2B7
MNA708
Fig.2 Logic symbol.
2003 Dec 08
5
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
48
1
handbook, halfpage
1OE
G3
3EN1 BA
[
]
1DIR
[
]
3EN2 AB
25
24
G6
2OE
2DIR
[
]
]
6EN4 BA
[
6EN5 AB
47
2
1
1A0
1B0
2
3
5
46
44
43
41
40
1A1
1A2
1A3
1A4
1A5
1A6
1A7
2A0
1B1
1B2
1B3
1B4
1B5
1B6
1B7
2B0
V
handbook, halfpage
CC
6
8
9
data input
to internal circuit
11
12
13
38
37
36
4
MNA705
5
35
33
32
30
29
27
26
14
16
17
19
20
22
23
2A1
2A2
2A3
2A4
2A5
2A6
2A7
2B1
2B2
2B3
2B4
2B5
2B6
2B7
MNA709
Fig.3 Logic symbol (IEEE/IEC).
Fig.4 Bushold circuit.
2003 Dec 08
6
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
supply voltage
CONDITIONS
MIN.
2.7
MAX.
3.6
UNIT
VCC
for maximum speed performance
for low voltage applications
V
1.2
0
3.6
5.5
VCC
5.5
+125
20
V
VI
input voltage
V
VO
output voltage
output HIGH or LOW state
output 3-state
0
V
0
V
Tamb
tr, tf
ambient temperature
in free air
−40
0
°C
input rise and fall times
VCC = 1.2 to 2.7 V
VCC = 2.7 to 3.6 V
ns/V
ns/V
0
10
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V).
SYMBOL
PARAMETER
supply voltage
CONDITIONS
MIN.
−0.5
MAX.
+6.5
UNIT
VCC
IIK
V
input diode current
input voltage
VI < 0
note 1
−
−50
mA
V
VI
−0.5
−
+6.5
±50
IOK
VO
output diode current
output voltage
VO > VCC or VO < 0
mA
V
output HIGH or LOW state; note 1 −0.5
VCC + 0.5
+6.5
±50
output 3-state; note 1
−0.5
−
V
IO
output source or sink current VO = 0 to VCC
VCC or GND current
mA
mA
°C
mW
ICC, IGND
Tstg
−
±100
+150
500
storage temperature
−65
−
Ptot
power dissipation
Tamb = −40 to +125 °C; note 2
Notes
1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. Above 60 °C the value of Ptot derates linearly with 5.5 mW/K.
2003 Dec 08
7
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
DC CHARACTERISTICS
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
TEST CONDITIONS
SYMBOL
PARAMETER
MIN.
TYP.(1) MAX.
UNIT
OTHER
VCC (V)
Tamb = −40 to +85 °C
VIH
VIL
HIGH-level input voltage
1.2
VCC
−
−
V
2.7 to 3.6
1.2
2.0
−
−
−
−
−
V
V
V
LOW-level input voltage
GND
0.8
2.7 to 3.6
−
VOH
HIGH-level output voltage VI = VIH or VIL
IO = −100 µA
IO = −6 mA
IO = −12 mA
2.7 to 3.6
2.7
V
V
V
CC − 0.2
VCC
−
−
−
−
V
V
V
CC − 0.5
CC − 0.8
3.0
−
VOL
LOW-level output voltage
input leakage current
VI = VIH or VIL
IO = 100 µA
IO = 6 mA
2.7 to 3.6
2.7
−
−
−
−
0
0.20
0.40
0.55
±5
V
−
V
IO = 12 mA
3.0
−
V
ILI
VI = 5.5 V or GND;
note 2
3.6
±0.1
µA
IOZ
3-state output OFF-state
current
VI = VIH or VIL;
VO = 5.5 V or GND;
notes 2 and 3
3.6
−
±0.1
±5
µA
Ioff
power-off leakage supply
current
VI or VO = 5.5 V
0.0
−
−
−
±0.1
0.1
5
±10
20
500
−
µA
µA
µA
µA
µA
µA
µA
ICC
quiescent supply current
VI = VCC or GND;
IO = 0
3.6
∆ICC
IBHL
IBHH
IBHLO
IBHHO
additional quiescent supply VI = VCC − 0.6 V;
current per input pin
2.7 to 3.6
3.0
IO = 0
bushold LOW sustaining
current
VI = 0.8 V;
notes 4 and 5
75
−
bushold HIGH sustaining
current
VI = 2.0 V;
notes 4 and 5
3.0
−75
500
−500
−
−
bushold LOW overdrive
current
notes 4 and 6
3.6
−
−
bushold HIGH overdrive
current
notes 4 and 6
3.6
−
−
2003 Dec 08
8
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
TEST CONDITIONS
SYMBOL
PARAMETER
MIN.
TYP.(1) MAX.
UNIT
OTHER
VCC (V)
Tamb = −40 to +125 °C
VIH
HIGH-level input voltage
LOW-level input voltage
1.2
VCC
−
−
V
2.7 to 3.6
1.2
2.0
−
−
−
−
−
V
V
V
VIL
GND
0.8
2.7 to 3.6
−
VOH
HIGH-level output voltage VI = VIH or VIL
IO = −100 µA
IO = −6 mA
IO = −12 mA
2.7 to 3.6
2.7
V
V
V
CC − 0.3
−
−
−
−
−
−
V
V
V
V
CC − 0.65
CC − 1
3.0
VOL
LOW-level output voltage
input leakage current
VI = VIH or VIL
IO = 100 µA
IO = 6 mA
2.7 to 3.6
2.7
−
−
−
−
−
−
−
−
0.3
0.6
0.8
±20
V
IO = 12 mA
3.0
V
ILI
VI = 5.5 V or GND;
note 2
3.6
µA
IOZ
3-state output OFF-state
current
VI = VIH or VIL;
VO = 5.5 V or GND;
notes 2 and 3
3.6
−
−
±20
µA
Ioff
power-off leakage supply
current
VI or VO = 5.5 V
0.0
−
−
−
−
−
−
−
−
−
−
±20
80
5000
−
µA
µA
µA
µA
µA
µA
µA
ICC
quiescent supply current
VI = VCC or GND;
IO = 0
3.6
∆ICC
IBHL
IBHH
IBHLO
IBHHO
additional quiescent supply VI = VCC − 0.6 V;
current per input pin
2.7 to 3.6
3.0
IO = 0
bushold LOW sustaining
current
VI = 0.8 V;
notes 4 and 5
60
bushold HIGH sustaining
current
VI = 2.0 V;
notes 4 and 5
3.0
−60
500
−500
−
bushold LOW overdrive
current
notes 4 and 6
3.6
−
bushold HIGH overdrive
current
notes 4 and 6
3.6
−
Notes
1. All typical values are measured at VCC = 3.3 V and Tamb = 25 °C.
2. For bushold parts, the bushold circuit is switched off when VI > VCC allowing 5.5 V on the input terminal.
3. For I/O ports the parameter IOZ includes the input leakage current.
4. Valid for data inputs of bushold parts (LVCH162245A) only. For data inputs only, control inputs do not have a bushold
circuit.
5. The specified sustaining current at the data input holds the input below the specified VI level.
6. The specified overdrive current at the data input forces the data input to the opposite logic input state.
2003 Dec 08
9
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
AC CHARACTERISTICS
GND = 0 V; tr = tf ≤ 2.5 ns.
TEST CONDITIONS
SYMBOL
PARAMETER
MIN.
TYP.(1) MAX.
UNIT
WAVEFORMS
VCC (V)
Tamb = −40 to +85 °C
tPHL/tPLH
propagation delay nAn to nBn;
nBn to nAn
see Figs 5 and 7
1.2
2.7
3.0 to 3.6 1.0
−
12
−
ns
1.0
4.2
3.3(2)
6.7
5.7
−
ns
ns
ns
ns
ns
ns
ns
ns
tPZH/tPZL
3-state output enable time nOE see Figs 6 and 7
to nAn; nOE to nBn
1.2
2.7
−
18
1.5
5.1
3.4(2)
8.5
7.5
−
3.0 to 3.6 1.0
tPHZ/tPLZ
3-state output disable time nOE see Figs 6 and 7
to nAn; nOE to nBn
1.2
2.7
−
10
1.5
3.5
3.3(2)
7.5
6.5
3.0 to 3.6 1.5
Tamb = −40 to +125 °C
tPHL/tPLH
tPZH/tPZL
tPHZ/tPLZ
propagation delay nAn to nBn;
nBn to nAn
see Figs 5 and 7
1.2
2.7
−
−
−
−
−
−
−
−
−
−
−
ns
ns
ns
ns
ns
ns
ns
ns
ns
1.0
8.5
9.5
−
3.0 to 3.6 1.0
3-state output enable time nOE see Figs 6 and 7
to nAn; nOE to nBn
1.2
2.7
−
1.5
7.5
9.5
−
3.0 to 3.6 1.0
3-state output disable time nOE see Figs 6 and 7
to nAn; nOE to nBn
1.2
2.7
−
1.5
11.0
8.5
3.0 to 3.6 1.5
Notes
1. All typical values are measured at Tamb = 25 °C.
2. These typical values are measured at VCC = 3.3 V and Tamb = 25 °C.
2003 Dec 08
10
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
AC WAVEFORMS
V
handbook, halfpage
I
nAn, nBn
input
V
M
GND
t
t
PHL
PLH
V
OH
nBn, nAn
output
V
M
MNA477
V
OL
INPUT
VCC
VM
0.5 × VCC VCC
VI
tr = tf
1.2 V
2.7 V
≤ 2.5 ns
≤ 2.5 ns
≤ 2.5 ns
1.5 V
1.5 V
2.7 V
2.7 V
3.0 to 3.6 V
VOL and VOH are typical output voltage drop that occur with the output load.
Fig.5 The input (nAn, nBn) to outputs (nBn, nAn) propagation delays.
2003 Dec 08
11
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
V
I
nOE input
V
M
GND
t
t
PZL
PLZ
V
CC
output
LOW-to-OFF
OFF-to-LOW
V
M
V
X
V
OL
t
t
PHZ
PZH
V
OH
V
Y
output
HIGH-to-OFF
OFF-to-HIGH
V
M
GND
outputs
enabled
outputs
enabled
outputs
disabled
MNA362
INPUT
VCC
VM
0.5 × VCC VCC
VI
tr = tf
VX = VOL + 0.3 V at VCC ≥ 2.7 V;
X = VOL + 0.1 V at VCC < 2.7 V;
1.2 V
≤ 2.5 ns
≤ 2.5 ns
≤ 2.5 ns
V
2.7 V
1.5 V
1.5 V
2.7 V
2.7 V
VY = VOH − 0.3 V at VCC ≥ 2.7 V;
VY = VOH − 0.1 V at VCC < 2.7 V.
3.0 to 3.6 V
VOL and VOH are typical output voltage drop that occur with the output load.
Fig.6 3-state enable and disable times.
2003 Dec 08
12
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
V
EXT
V
CC
R
L
V
V
O
I
PULSE
GENERATOR
D.U.T.
C
R
R
L
L
T
MNA616
VEXT
tPLH/tPHL tPZH/tPHZ tPZL/tPLZ
VCC
VI
VCC
CL
RL
1.2 V
50 pF
50 pF
50 pF
500 Ω(1) open
GND
GND
GND
2 × VCC
2 × VCC
2 × VCC
2.7 V
2.7 V
2.7 V
500 Ω
500 Ω
open
open
3.0 to 3.6 V
Note
1. The circuit performs better when RL = 1000 Ω.
Definitions for test circuits:
R
L = Load resistor.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig.7 Load circuitry for switching times.
2003 Dec 08
13
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
PACKAGE OUTLINES
SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm
SOT370-1
D
E
A
X
c
y
H
v
M
A
E
Z
25
48
Q
A
2
A
A
(A )
3
1
θ
pin 1 index
L
p
L
24
1
detail X
w
M
b
p
e
0
5
10 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(1)
(1)
UNIT
A
A
A
b
c
D
E
e
H
E
L
L
Q
v
w
y
Z
θ
p
p
1
2
3
max.
8o
0o
0.4
0.2
2.35
2.20
0.3
0.2
0.22 16.00
0.13 15.75
7.6
7.4
10.4
10.1
1.0
0.6
1.2
1.0
0.85
0.40
mm
2.8
0.25
0.635
1.4
0.25
0.18
0.1
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-19
SOT370-1
MO-118
2003 Dec 08
14
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1 mm
SOT362-1
E
D
A
X
c
H
v
M
A
y
E
Z
48
25
Q
A
2
(A )
3
A
A
1
pin 1 index
θ
L
p
L
detail X
1
24
w
M
b
e
p
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions).
A
(1)
(2)
UNIT
A
A
A
b
c
D
E
e
H
L
L
p
Q
v
w
y
Z
θ
1
2
3
p
E
max.
8o
0o
0.15
0.05
1.05
0.85
0.28
0.17
0.2
0.1
12.6
12.4
6.2
6.0
8.3
7.9
0.8
0.4
0.50
0.35
0.8
0.4
mm
1.2
0.5
1
0.25
0.25
0.08
0.1
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-19
SOT362-1
MO-153
2003 Dec 08
15
Philips Semiconductors
Product specification
16-bit transceiver with direction pin; 30 Ω series
termination resistors; 5 V tolerant input/output; 3-state
74LVC162245A;
74LVCH162245A
DATA SHEET STATUS
DATA SHEET
STATUS(1)
PRODUCT
STATUS(2)(3)
LEVEL
DEFINITION
I
Objective data
Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
II
Preliminary data Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III
Product data
Production
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
DEFINITIONS
DISCLAIMERS
Short-form specification
The data in a short-form
Life support applications
These products are not
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes
Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
Application information
Applications that are
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2003 Dec 08
16
Philips Semiconductors – a worldwide company
Contact information
For additional information please visit http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
© Koninklijke Philips Electronics N.V. 2003
SCA75
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
R20/05/pp17
Date of release: 2003 Dec 08
Document order number: 9397 750 12263
相关型号：
74LVC162245A-Q100
16-bit transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant input/output; 3-state
NEXPERIA
74LVC162245ADG-T
IC LVC/LCX/Z SERIES, DUAL 8-BIT TRANSCEIVER, TRUE OUTPUT, PDSO48, PLASTIC, TSSOP2-48, Bus Driver/Transceiver
NXP
74LVC162245ADGG
16-bit transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant input/output; 3-stateProduction
NEXPERIA
74LVC162245ADGG-Q100
16-bit transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant input/output; 3-state
NEXPERIA
74LVC162245ADGV
16-bit transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant input/output; 3-stateProduction
NEXPERIA
74LVC162245ADGV-Q100
16-bit transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant input/output; 3-state
NEXPERIA
©2020 ICPDF网 联系我们和版权申明