933670370112 [NXP]
8-CHANNEL, SGL ENDED MULTIPLEXER, PDIP16, SOT-38-1, DIP16;型号: | 933670370112 |
厂家: | NXP |
描述: | 8-CHANNEL, SGL ENDED MULTIPLEXER, PDIP16, SOT-38-1, DIP16 光电二极管 |
文件: | 总21页 (文件大小:206K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
DATA SHEET
For a complete data sheet, please also download:
• The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
• The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
• The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT4051
8-channel analog
multiplexer/demultiplexer
December 1990
Product specification
File under Integrated Circuits, IC06
Philips Semiconductors
Product specification
8-channel analog
multiplexer/demultiplexer
74HC/HCT4051
“4000B” series. They are specified in compliance with
JEDEC standard no. 7A.
FEATURES
• Wide analog input voltage range: ± 5 V.
The 74HC/HCT4051 are 8-channel analog
multiplexers/demultiplexers with three digital select inputs
(S0 to S2), an active LOW enable input (E), eight
independent inputs/outputs (Y0 to Y7) and a common
input/output (Z).
• Low “ON” resistance:
80 Ω (typ.) at VCC − VEE = 4.5 V
70 Ω (typ.) at VCC − VEE = 6.0 V
60 Ω (typ.) at VCC − VEE = 9.0 V
• Logic level translation:
With E LOW, one of the eight switches is selected (low
impedance ON-state) by S0 to S2. With E HIGH, all
switches are in the high impedance OFF-state,
independent of S0 to S2.
to enable 5 V logic to communicate with ± 5 V analog
signals
• Typical “break before make” built in
• Output capability: non-standard
• ICC category: MSI
VCC and GND are the supply voltage pins for the digital
control inputs (S0 to S2, and E). The VCC to GND ranges
are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The
analog inputs/outputs (Y0 to Y7, and Z) can swing between
VCC as a positive limit and VEE as a negative limit.
GENERAL DESCRIPTION
The 74HC/HCT4051 are high-speed Si-gate CMOS
devices and are pin compatible with the “4051” of the
V
CC − VEE may not exceed 10.0 V.
For operation as a digital multiplexer/demultiplexer, VEE is
connected to GND (typically ground).
QUICK REFERENCE DATA
V
EE = GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns
SYMBOL PARAMETER
tPZH/ tPZL
TYPICAL
CONDITIONS
UNIT
HC
HCT
turn “ON” time
E to Vos
CL = 15 pF; RL = 1 kΩ;
VCC = 5 V
22
20
22
ns
Sn to Vos
24
ns
t
PHZ/ tPLZ
turn “OFF” time
E to Vos
18
19
16
20
3.5
25
ns
ns
pF
pF
Sn to Vos
CI
input capacitance
3.5
25
CPD
CS
power dissipation capacitance per switch
max. switch capacitance
independent (Y)
notes 1 and 2
5
5
pF
pF
common
(Z)
25
25
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
2
PD = CPD × VCC2 × fi + ∑ { (CL + CS ) × VCC × fo } where:
fi = input frequency in MHz
fo = output frequency in MHz
2
∑ { (CL + CS) × VCC × fo } = sum of outputs
CL = output load capacitance in pF
CS = max. switch capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC − 1.5 V
December 1990
2
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”.
PIN DESCRIPTION
PIN NO.
SYMBOL
NAME AND FUNCTION
common input/output
enable input (active LOW)
negative supply voltage
ground (0 V)
3
Z
6
E
7
VEE
8
GND
S0 to S2
Y0 to Y7
VCC
11, 10, 9
select inputs
13, 14, 15, 12, 1, 5, 2, 4
16
independent inputs/outputs
positive supply voltage
Fig.1 Pin configuration.
Fig.2 Logic symbol.
Fig.3 IEC logic symbol.
December 1990
3
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
APPLICATIONS
• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
FUNCTION TABLE
INPUTS
channel
ON
E
S2
S1
S0
L
L
L
L
L
L
L
L
L
L
H
H
L
H
L
Y0 − Z
Y1 − Z
Y2 − Z
Y3 − Z
H
L
L
L
L
H
H
H
H
L
L
H
H
L
H
L
Y4 − Z
Y5 − Z
Y6 − Z
Y7 − Z
H
H
X
X
X
none
Notes
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care
Fig.4 Functional diagram.
Fig.5 Schematic diagram (one switch).
December 1990
4
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134)
Voltages are referenced to VEE = GND (ground = 0 V)
SYMBOL
VCC
PARAMETER
DC supply voltage
MIN. MAX. UNIT
CONDITIONS
−0.5 +11.0 V
±IIK
±ISK
±IS
DC digital input diode current
DC switch diode current
DC switch current
20
20
25
20
50
mA
mA
mA
mA
mA
for VI < −0.5 V or VI > VCC + 0.5 V
for VS < −0.5 V or VS > VCC + 0.5 V
for −0.5 V < VS < VCC + 0.5 V
±IEE
DC VEE current
±ICC; ±IGND DC VCC or GND current
Tstg
Ptot
storage temperature range
−65
+150 °C
power dissipation per package
for temperature range: −40 to +125 °C
74HC/HCT
plastic DIL
750
500
100
mW
above +70 °C: derate linearly with 12 mW/K
above +70 °C: derate linearly with 8 mW/K
plastic mini-pack (SO)
power dissipation per switch
mW
mW
PS
Note to ratings
1. To avoid drawing VCC current out of terminal Z, when switch current flows in terminals Yn, the voltage drop across
the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminal Z, no VCC current will flow out
of terminals Yn. In this case there is no limit for the voltage drop across the switch, but the voltages at Yn and Z may
not exceed VCC or VEE
.
RECOMMENDED OPERATING CONDITIONS
74HC
74HCT
SYMBOL
PARAMETER
DC supply voltage VCC − GND 2.0
UNIT
CONDITIONS
min. typ. max. min. typ. max.
VCC
VCC
VI
5.0 10.0 4.5
5.0 10.0 2.0
VCC GND
VCC VEE
5.0 5.5
5.0 10.0
VCC
V
V
V
V
see Figs 6 and 7
see Figs 6 and 7
DC supply voltage VCC − VEE
DC input voltage range
2.0
GND
VEE
VS
DC switch voltage range
VCC
Tamb
operating ambient temperature −40
+85 −40
+85 °C
range
see DC and AC
CHARACTERISTICS
Tamb
tr, tf
operating ambient temperature −40
range
+125 −40
+125 °C
input rise and fall times
1000
500
400
250
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
VCC = 10.0 V
6.0
6.0 500
ns
December 1990
5
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
Fig.6 Guaranteed operating area as a function of
the supply voltages for 74HC4051.
Fig.7 Guaranteed operating area as a function of
the supply voltages for 74HCT4051.
DC CHARACTERISTICS FOR 74HC/HCT
For 74HC: VCC − GND or VCC − VEE = 2.0, 4.5, 6.0 and 9.0 V
For 74HCT: VCC − GND = 4.5 and 5.5 V; VCC − VEE = 2.0, 4.5, 6.0 and 9.0 V
Tamb (°C)
TEST CONDITIONS
74HC/HCT
SYMBOL
PARAMETER
UNIT
VCC VEE
IS
(µA)
+25
−40 to +85 −40 to +125
Vis VI
(V)
(V)
min. typ. max. min. max. min. max.
RON
ON resistance (peak)
−
−
−
−
Ω
Ω
Ω
Ω
2.0
4.5
6.0
0
0
0
100
VCC VIH
100 180
90 160
70 130
225
200
165
270
240
195
1000 to
1000 VEE VIL
or
4.5 −4.5 1000
RON
ON resistance (rail)
ON resistance (rail)
150
−
−
−
Ω
Ω
Ω
Ω
2.0
4.5
6.0
0
0
0
100
1000
1000
VEE VIH
80 140
70 120
60 105
175
150
130
210
180
160
or
VIL
4.5 −4.5 1000
RON
150
−
−
−
Ω
Ω
Ω
Ω
2.0
4.5
6.0
0
0
0
100
1000
1000
VCC VIH
90 160
80 140
65 120
200
175
150
240
210
180
or
VIL
4.5 −4.5 1000
∆RON
maximum ∆ON
resistance between
any two channels
−
9
8
6
Ω
Ω
Ω
Ω
2.0
4.5
6.0
0
0
0
VCC VIH
to
or
VEE VIL
4.5 −4.5
Notes to DC characteristics
1. At supply voltages (VCC − VEE) approaching 2.0 V the analog switch ON-resistance becomes extremely non-linear.
Therefore it is recommended that these devices be used to transmit digital signals only, when using these supply
voltages.
2. For test circuit measuring RON see Fig.8.
December 1990
6
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
DC CHARACTERISTICS FOR 74HC
Voltages are referenced to GND (ground = 0 V)
Tamb (°C)
TEST CONDITIONS
74HC
SYMBOL
PARAMETER
UNIT
Vi
OTHER
VCC VEE
+25
−40 to +85 −40 to +125
(V)
(V)
min. typ. max. min. max. min. max.
VIH
HIGH level input
voltage
1.5 1.2
3.15 2.4
4.2 3.2
6.3 4.7
1.5
3.15
4.2
6.3
1.5
3.15
4.2
6.3
V
2.0
4.5
6.0
9.0
VIL
LOW level input
voltage
0.8 0.5
0.5
1.35
1.8
2.7
0.5
1.35
1.8
2.7
V
2.0
4.5
6.0
9.0
2.1 1.35
2.8 1.8
4.3 2.7
± II
input leakage
current
0.1
0.2
1.0
2.0
1.0
2.0
µA
µA
µA
µA
6.0
10.0 0
0
VCC
or
GND
± IS
± IS
± IS
ICC
analog switch
OFF-state current
per channel
0.1
0.4
0.4
1.0
4.0
4.0
1.0
4.0
4.0
10.0 0
VIH
or
VIL
|VS| =
CC −VEE
Fig.10
V
analog switch
OFF-state current
all channels
10.0 0
10.0 0
VIH
or
VIL
|VS| =
VCC − VEE
Fig.10
analog switch
ON-state current
VIH
or
VIL
|VS| =
VCC − VEE
Fig.11
quiescent supply
current
8.0
16.0
80.0
160.0
160.0 µA
320.0
6.0
10.0 0
0
VCC Vis =VEE
or or VCC
;
GND Vos = VCC
or VEE
December 1990
7
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
AC CHARACTERISTICS FOR 74HC
GND = 0 V; tr = tf = 6 ns; CL = 50 pF
Tamb (°C)
TEST CONDITIONS
OTHER
74HC
SYMBOL
PARAMETER
UNIT
VCC VEE
(V) (V)
+25
−40 to +85 −40 to +125
min. typ. max. min. max.
min.
max.
tPHL/ tPLH propagation delay
Vis to Vos
14
5
4
60
12
10
8
75
15
13
10
90
ns
2.0
4.5
6.0
0
0
0
RL = ∞; CL = 50 pF
(see Fig.17)
18
15
12
4
4.5 −4.5
t
t
t
t
PZH/ tPZL turn “ON” time
E to Vos
72
29
21
18
345
69
59
430
86
73
520
104
88
ns
ns
ns
ns
2.0
4.5
6.0
0
0
0
RL = 1 kΩ;
CL = 50 pF
(see Fig.18, 19 and
51
64
77
4.5 −4.5 20)
PZH/ tPZL turn “ON” time
Sn to Vos
66
28
19
16
345
69
59
430
86
73
520
104
88
2.0
4.5
6.0
0
0
0
RL = 1 kΩ;
CL = 50 pF
(see Fig.18, 19 and
51
64
77
4.5 −4.5 20)
PHZ/ tPLZ turn “OFF” time
E to Vos
58
31
17
18
290
58
49
365
73
62
435
87
74
2.0
4.5
6.0
0
0
0
RL = 1 kΩ;
CL = 50 pF
(see Fig.18, 19 and
42
53
72
4.5 −4.5 20)
PHZ/ tPLZ turn “OFF” time
Sn to Vos
61
25
18
18
290
58
49
365
73
62
435
87
74
2.0
4.5
6.0
0
0
0
RL = 1 kΩ;
CL = 50 pF
(see Fig.18, 19 and
42
53
72
4.5 −4.5 20)
December 1990
8
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
DC CHARACTERISTICS FOR 74HCT
Voltages are referenced to GND (ground = 0)
Tamb (°C)
TEST CONDITIONS
74HCT
SYMBOL PARAMETER
UNIT
VCC VEE
+25
−40 to +85
−40 to +125
Vi
OTHER
(V)
(V)
min. typ. max. min.
max.
min.
max.
VIH
VIL
± II
± IS
HIGH level
input voltage
2.0
1.6
2.0
2.0
V
4.5
to
5.5
LOW level
input voltage
1.2 0.8
0.1
0.8
0.8
1.0
1.0
V
4.5
to
5.5
input leakage
current
1.0
1.0
µA
µA
5.5
0
VCC
or
GND
analog switch
OFF-state
current per
channel
0.1
10.0 0
10.0 0
10.0 0
VIH
or
VIL
|VS| =
CC − VEE
(see Fig.10)
V
± IS
analog switch
OFF-state
current all
channels
0.4
4.0
4.0
4.0
4.0
µA
µA
VIH
or
VIL
|VS| =
V
CC −VEE
(see Fig.10)
± IS
analog switch
ON-state
current
0.4
8.0
VIH
or
VIL
|VS| =
V
CC−VEE
(see Fig.11)
ICC
quiescent
supply current
80.0
160.0
160.0 µA
5.5
0
VCC Vis =VEE or
VCC
16.0
320.0
5.0 −5.0 or
;
GND Vos = VCC
or VEE
∆ICC
additional
quiescent
100 360
450
490
µA
4.5
to
0
VCC other inputs
− 2.1 at VCC or
supply current
per input pin
for unit load
coefficient is 1
(note 1)
5.5
V
GND
Note to HCT types
1. The value of additional quiescent supply current (∆ ICC) for a unit load of 1 is given here.
To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below.
INPUT
UNIT LOAD COEFFICIENT
Sn
E
0.50
0.50
December 1990
9
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
AC CHARACTERISTICS FOR 74HCT
GND = 0 V; tr = tf = 6 ns; CL = 50 pF
Tamb (°C)
TEST CONDITIONS
OTHER
74HCT
SYMBOL PARAMETER
UNIT
VCC VEE
(V) (V)
+25
−40 to +85 −40 to +125
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation
delay Vis to Vos
5
4
12
8
15
10
18
12
ns
ns
ns
ns
ns
4.5
4.5 −4.5 (see Fig.17)
4.5 RL = 1 kΩ; CL = 50 pF
4.5 −4.5 (see Fig.18, 19 and 20)
4.5 RL = 1 kΩ; CL = 50 pF
4.5 −4.5 (see Fig.18, 19 and 20)
4.5 RL = 1 kΩ; CL = 50 pF
4.5 −4.5 (see Fig.18, 19 and 20)
4.5 RL = 1 kΩ; CL = 50 pF
4.5 −4.5 (see Fig.18, 19 and 20)
0
RL = ∞; CL = 50 pF
t
t
t
t
PZH/ tPZL turn “ON” time
E to Vos
26 55
16 39
69
49
83
59
0
PZH/ tPZL turn “ON” time
Sn to Vos
28 55
16 39
69
49
83
59
0
PHZ/ tPLZ turn “OFF”
time E to Vos
19 45
16 32
56
40
68
48
0
PHZ/ tPLZ turn “OFF”
time Sn to Vos
23 45
16 32
56
40
68
48
0
Fig.8 Test circuit for measuring RON
.
Fig.9 Typical RON as a function of input voltage Vis
for Vis = 0 to VCC − VEE
.
December 1990
10
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
Fig.10 Test circuit for measuring OFF-state current.
Fig.11 Test circuit for measuring ON-state current.
December 1990
11
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
ADDITIONAL AC CHARACTERISTICS FOR 74HC/HCT
Recommended conditions and typical values
GND = 0 V; Tamb = 25 °C
VCC
(V)
VEE
(V)
Vis(p−p)
(V)
SYMBOL PARAMETER
sine-wave distortion
typ. UNIT
CONDITIONS
0.04
%
%
2.25
4.5
−2.25
−4.5
4.0
8.0
RL = 10 kΩ; CL = 50 pF
(see Fig.14)
f = 1 kHz
0.02
sine-wave distortion
f = 10 kHz
0.12
0.06
%
%
2.25
4.5
−2.25
−4.5
4.0
8.0
RL = 10 kΩ; CL = 50 pF
(see Fig.14)
switch “OFF” signal
feed-through
−50
−50
dB
dB
2.25
4.5
−2.25
−4.5
RL = 600 Ω; CL = 50 pF
(see Figs 12 and 15)
note 1
RL = 600 Ω; CL = 50 pF;
f = 1 MHz (E or Sn,
square-wave between
VCC and GND,
crosstalk voltage between
control and any switch
(peak-to-peak value)
110
220
mV
mV
4.5
4.5
0
−4.5
V(p−p)
tr = tf = 6 ns)
(see Fig.16)
minimum frequency
response (−3dB)
170
180
MHz 2.25
MHz 4.5
−2.25
−4.5
RL = 50 Ω; CL = 10 pF
(see Fig.13 and 14)
fmax
CS
note 2
maximum switch capacitance
independent (Y)
5
25
pF
pF
common
(Z)
Notes to AC characteristics
1. Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600 Ω).
2. Adjust input voltage Vis to 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50 Ω).
General note
Vis is the input voltage at a Yn or Z terminal, whichever is assigned as an input.
Vos is the output voltage at a Yn or Z terminal, whichever is assigned as an output.
Test conditions:
VCC = 4.5 V; GND = 0 V; VEE = −4.5 V;
RL = 50 Ω; Rsource = 1 kΩ
Fig.12 Typical switch “OFF” signal feed-through as a function of frequency.
December 1990
12
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
Test conditions:
VCC = 4.5 V; GND = 0 V; VEE = −4.5 V;
RL = 50 Ω; Rsource = 1 kΩ
Fig.13 Typical frequency response.
Fig.14 Test circuit for measuring sine-wave
distortion and minimum frequency response.
Fig.15 Test circuit for measuring switch “OFF”
signal feed-through.
The crosstalk is defined as follows (oscilloscope output):
Fig.16 Test circuit for measuring crosstalk between control and any switch.
December 1990
13
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
AC WAVEFORMS
Fig.17 Waveforms showing the input (Vis) to output (Vos) propagation delays.
(1) HC : VM = 50%; VI = GND to VCC
.
HCT: VM = 1.3 V; VI = GND to 3 V.
Fig.18 Waveforms showing the turn-ON and turn-OFF times.
December 1990
14
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
TEST CIRCUIT AND WAVEFORMS
Conditions
TEST
tPZH
tPZL
tPHZ
SWITCH
VEE
VCC
VEE
VCC
open
Vis
VCC
VEE
VCC
VEE
tr; tf
FAMILY AMPLITUDE
VM
fmax
;
OTHER
PULSE WIDTH
74HC
VCC
50%
1.3 V < 2 ns
< 2 ns
6 ns
6 ns
tPLZ
others
74HCT 3.0 V
pulse
CL = load capacitance including jig and probe capacitance (see AC CHARACTERISTICS for values).
RT = termination resistance should be equal to the output impedance ZO of the pulse generator.
tr = tf = 6 ns; when measuring fmax, there is no constraint to tr, tf with 50% duty factor.
Fig.19 Test circuit for measuring AC performance.
Conditions
TEST
tPZH
tPZL
tPHZ
tPLZ
others
SWITCH
VEE
VCC
VEE
VCC
open
Vis
VCC
VEE
VCC
VEE
tr; tf
FAMILY AMPLITUDE
VM
fmax
;
OTHER
PULSE WIDTH
74HC
VCC
50%
1.3 V < 2 ns
< 2 ns
6 ns
6 ns
74HCT 3.0 V
pulse
CL = load capacitance including jig and probe capacitance (see AC CHARACTERISTICS for values).
RT = termination resistance should be equal to the output impedance ZO of the pulse generator.
tr = tf = 6 ns; when measuring fmax, there is no constraint to tr, tf with 50% duty factor.
Fig.20 Input pulse definitions.
December 1990
15
Philips Semiconductors
Product specification
8-channel analog multiplexer/demultiplexer
74HC/HCT4051
PACKAGE OUTLINES
See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.
December 1990
16
mit Q
Philips Semiconductors Home
ProducBuy
MySemContac
Product Information
catalogonline
Information as of 2003-04-22
My.Semiconductors.COM.
Your personal service from Use right mouse button to
74HC/HCT4051; 8-
channel analog
Philips Semiconductors.
Please register now !
Stay informed
download datasheet
Download datasheet
multiplexer/demultiplexer
Products
General description
Features
Datasheet
Email/translate
Applications
Support & tools
Similar products
Buy online
Parametrics
Block diagram
Products & packages
MultiMarket
•
•
•
Semiconductors
Product Selector
Catalog by
Function
General description
The 74HC/HCT4051 are high-speed Si-gate CMOS devices and are pin compatible with the '4051' of the '4000B' series. They
are specified in compliance with JEDEC standard no. 7A.
Catalog by
System
•
Cross-reference
Packages
•
•
The 74HC/HCT4051 are 8-channel analog multiplexers/demultiplexers with three digital select inputs (S0
to S
2
), an active LOW enable input (E), eight
independent inputs/outputs (Y0 to Y7) and a common input/output (Z).
End of Life
information
Distributors Go
Here!
•
•
With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With E HIGH, all switches are in the high impedance OFF-state, independent of S0 to S2.
VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a positive limit and VEE as a negative limit.
Models
•
•
VCC - VEE may not exceed 10.0 V.
SoC solutions
For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).
Features
●
●
Wide analog input voltage range: ± 5 V.
Low 'ON' resistance:
80 Ω (typ.) at VCC - VEE = 4.5 V
70 Ω (typ.) at VCC - VEE = 6.0 V
60 Ω (typ.) at VCC - VEE = 9.0 V
●
●
●
●
Logic level translation: to enable 5 V logic to communicate with ± 5 V analog signals
Typical 'break before make' built in
Output capability: non-standard
ICC category: MSI
Datasheet
Type number Title
Publication
release date
Datasheet status Page
File Datasheet
count size
(kB)
74HC/HCT4051 8-channel analog
12/1/1990
Product
specification
16
118
Download
multiplexer/demultiplexer
Additional datasheet info
To complete the device datasheet with package and family information, also download the following PDF files. The "Logic
Package Information" document is required to determine in which package(s) this device is available.
Document
Description
1
HCT_FAMILY_SPECIFICATIONS HC/T Family Specifications, The IC06 74HC/HCT/HCMOS Logic Family
Specifications
2
3
HCT_PACKAGE_INFO
HCT_PACKAGE_OUTLINES
HC/T Package Info, The IC06 74HC/HCT/HCMOS Logic Package Information
HC/T Package Outlines, The IC06 74HC/HCT/HCMOS Logic Package
Outlines
Parametrics
Type number Package Description
Propagation Voltage No. Power
Logic
Output
Delay(ns)
of Dissipation
Pins Considerations Levels
Low Power or
16 Battery
Switching Drive
Capability
SOT109
(SO16)
8-Channel Analog
Multiplexer/Demultiplexer
5 Volts
+
74HC4051D
10~15
CMOS
CMOS
CMOS
CMOS
TTL
Low
Applications
Low Power or
16 Battery
SOT338-1
(SSOP16)
8-Channel Analog
Multiplexer/Demultiplexer
5 Volts
+
74HC4051DB
74HC4051N
10~15
Low
Low
Low
Low
Low
Low
Applications
Low Power or
16 Battery
SOT38-1
(DIP16)
8-Channel Analog
Multiplexer/Demultiplexer
5 Volts
+
10~15
Applications
Low Power or
16 Battery
SOT403-1
(TSSOP16)
8-Channel Analog
Multiplexer/Demultiplexer
5 Volts
+
74HC4051PW
74HCT4051D
74HCT4051DB
74HCT4051N
10~15
Applications
8-Channel Analog
Low Power or
16 Battery
SOT109
(SO16)
5 Volts
+
Multiplexer/Demultiplexer; 10~15
TTL Enabled
Applications
8-Channel Analog
Low Power or
SOT338-1
(SSOP16)
5 Volts
+
Multiplexer/Demultiplexer; 10~15
TTL Enabled
16 Battery
TTL
Applications
8-Channel Analog
Low Power or
SOT38-1
(DIP16)
5 Volts
+
Multiplexer/Demultiplexer; 10~15
TTL Enabled
16 Battery
Applications
TTL
Products, packages, availability and ordering
Type number North American Ordering code
Marking/Packing Package Device status Buy online
Discretes packing
type number
(12NC)
9337 148 20652
info
SOT109
(SO16)
Standard Marking *
Bulk Pack, CECC
74HC4051D
74HC4051D
Full production
Full production
Full production
Full production
Standard Marking *
9337 148 20653 Reel Pack, SMD,
13", CECC
SOT109
(SO16)
74HC4051D-T
SOT338-1
(SSOP16)
Standard Marking *
9351 738 10112
74HC4051DB 74HC4051DB
74HC4051DB-T
Bulk Pack
Standard Marking *
9351 738 10118 Reel Pack, SMD,
13"
SOT338-1
(SSOP16)
SOT38-1
(DIP16)
Standard Marking *
9336 697 40652
74HC4051N
74HC4051N
Full production
Full production
Bulk Pack, CECC
SOT403-1
Standard Marking *
9351 874 80112
74HC4051PW 74HC4051PW
74HC4051PW-T
(TSSOP16)
Bulk Pack
Standard Marking *
9351 874 80118 Reel Pack, SMD,
13"
SOT403-1
Full production
Full production
Full production
Full production
Full production
Full production
(TSSOP16)
SOT109
(SO16)
Standard Marking *
9337 153 00112
74HCT4051D 74HCT4051D
74HCT4051D-T
Bulk Pack
Standard Marking *
9337 153 00118 Reel Pack, SMD,
13"
SOT109
(SO16)
SOT338-1
(SSOP16)
Standard Marking *
9351 738 00112
74HCT4051DB 74HCT4051DB
Bulk Pack
Standard Marking *
9351 738 00118 Reel Pack, SMD,
13"
SOT338-1
(SSOP16)
74HCT4051DB-
T
SOT38-1
(DIP16)
Standard Marking *
9336 703 70112
74HCT4051N 74HCT4051N
Bulk Pack
Standard Marking *
Bulk Pack
SOT403
SOT403
74HCT4051PW
9352 704 18112
Full production
Full production
-
-
Standard Marking *
9352 704 18118 Reel Pack, SMD,
13"
Similar products
74HC/HCT4051 links to the similar products page containing an overview of products that are similar in function or
related to the type number(s) as listed on this page. The similar products page includes products from the same catalog tree(s),
relevant selection guides and products from the same functional category.
Support & tools
HC/T Family Specifications, The IC06 74HC/HCT/HCMOS Logic Family Specifications(date 01-Mar-98)
HC/T User Guide(date 01-Nov-97)
Email/translate this product information
●
●
Email this product information.
Translate this product information page from English to:
Translate
French
The English language is the official language used at the semiconductors.philips.com website and webpages. All translations
on this website are created through the use of Google Language Tools and are provided for convenience purposes only. No
rights can be derived from any translation on this website.
About this Web Site
| Copyright © 2003 Koninklijke Philips N.V. All rights reserved. | Privacy Policy |
| Koninklijke Philips N.V. | Access to and use of this Web Site is subject to the following Terms of Use. |
相关型号:
933670410112
HCT SERIES, 8-BIT RIGHT SERIAL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT, PDIP16, SOT-38-1, DIP-16
NXP
933670430112
HCT SERIES, DUAL MONOSTABLE MULTIVIBRATOR, PDIP16, 0.300 INCH, PLASTIC, SOT38-4, DIP-16
NXP
933670500652
IC HCT SERIES, DUAL HIGH LEVEL TRIGGERED D LATCH, COMPLEMENTARY OUTPUT, PDIP16, PLASTIC, DIP-16, FF/Latch
NXP
933670520652
IC HC/UH SERIES, OCTAL 1-BIT DRIVER, INVERTED OUTPUT, PDIP20, PLASTIC, DIP-20, Bus Driver/Transceiver
NXP
933670540652
IC HC/UH SERIES, OCTAL 1-BIT DRIVER, TRUE OUTPUT, PDIP20, PLASTIC, DIP-20, Bus Driver/Transceiver
NXP
933670550652
IC HC/UH SERIES, OCTAL 1-BIT TRANSCEIVER, TRUE OUTPUT, PDIP20, PLASTIC, DIP-20, Bus Driver/Transceiver
NXP
933670560652
IC HC/UH SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDIP20, PLASTIC, DIP-20, FF/Latch
NXP
933670600652
IC HC/UH SERIES, OCTAL 1-BIT DRIVER, TRUE OUTPUT, PDIP20, PLASTIC, DIP-20, Bus Driver/Transceiver
NXP
933670620652
IC HC/UH SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDIP20, PLASTIC, DIP-20, FF/Latch
NXP
©2020 ICPDF网 联系我们和版权申明