934059125115 [NXP]
L BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR, PLASTIC, SOT343R, 4 PIN;
| 型号： | 934059125115 |
| 厂家： | 
NXP |
| 描述： | L BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR, PLASTIC, SOT343R, 4 PIN 开关 光电二极管 晶体管 |
| 文件： | 总14页 (文件大小：192K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BFG424W
AK-4
CMP
NPN 25 GHz wideband transistor
Rev. 2 — 13 September 2011
Product data sheet
1. Product profile
1.1 General description
NPN double polysilicon wideband transistor with buried layer for low voltage applications
in a plastic, 4-pin dual-emitter SOT343R package.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features and benefits
Very high power gain
Low noise figure
High transition frequency
Emitter is thermal lead
Low feedback capacitance
1.3 Applications
Radio Frequency (RF) front end wideband applications such as:
analog and digital cellular telephones
cordless telephones (Cordless Telephone (CT), Personal Handy-phone
System (PHS), Digital Enhanced Cordless Telecommunications (DECT), etc.)
radar detectors
pagers
Satellite Antenna TeleVison (SATV) tuners
high frequency oscillators e.g. Dielectric Resonator Oscillator (DRO) for Low Noise
Block (LNB)
1.4 Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
open emitter
Min Typ Max Unit
VCBO
VCEO
IC
collector-base voltage
-
-
-
-
-
10
4.5
30
V
collector-emitter voltage open base
collector current
-
V
25
-
mA
[1]
Ptot
total power dissipation
Tsp 103 C
135 mW
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
Table 1.
Quick reference data …continued
Symbol Parameter
Conditions
Min Typ Max Unit
hFE
DC current gain
IC = 25 mA; VCE = 2 V;
50
80
120
Tj = 25 C
CCBS
fT
Gp(max)
NF
collector-base
capacitance
VCB = 2 V; f = 1 MHz
-
105
25
-
-
-
-
fF
transition frequency
maximum power gain
noise figure
IC = 25 mA; VCE = 2 V;
f = 2 GHz; Tamb = 25 C
-
GHz
dB
dB
[2]
IC = 25 mA; VCE = 2 V;
f = 2 GHz; Tamb = 25 C
-
22
IC = 2 mA; VCE = 2 V;
-
1.2
f = 2 GHz; S = opt
[1] Tsp is the temperature at the soldering point of the emitter pins.
[2] Gp(max) is the maximum power gain, if K > 1. If K < 1 then Gp(max) = Maximum Stable Gain (MSG), see
Figure 8.
2. Pinning information
Table 2.
Pinning
Pin
1
Description
emitter
Simplified outline
Symbol
3
4
4
2
base
3
emitter
2
4
collector
1, 3
mbb159
2
1
3. Ordering information
Table 3.
Ordering information
Type number Package
Name
Description
Version
BFG424W
-
plastic surface mounted package; reverse pinning;
4 leads
SOT343R
4. Marking
Table 4.
Marking
Type number
Marking code[1]
BFG424W
ND*
[1] * = p: made in Hong Kong.
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
2 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VCBO
VCEO
VEBO
IC
Parameter
Conditions
open emitter
open base
Min
Max
10
Unit
V
collector-base voltage
collector-emitter voltage
emitter-base voltage
collector current
-
-
4.5
1
V
open collector
-
V
-
30
mA
mW
[1]
Ptot
total power dissipation
storage temperature
junction temperature
Tsp 103 C
-
135
Tstg
65
+150 C
150 C
Tj
-
[1] Tsp is the temperature at the soldering point of the emitter pins.
6. Thermal characteristics
Table 6.
Thermal characteristics
Parameter
Symbol
Conditions
Typ
Unit
K/W
[1]
Rth(j-sp)
thermal resistance from junction Tsp 103 C
340
to solder point
[1] Tsp is the temperature at the soldering point of the emitter pins.
mgg681
200
P
tot
(mW)
150
100
50
0
0
40
80
120
160
T
(°C)
sp
Fig 1. Power derating curve
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
3 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
7. Characteristics
Table 7.
Characteristics
Tj = 25 C; unless otherwise specified.
Symbol Parameter
Conditions
Min Typ Max Unit
V(BR)CBO collector-base
IC = 2.5 A; IE = 0 mA
IC = 1 mA; IB = 0 mA
IE = 2.5 A; IC = 0 mA
10
4.5
1
-
-
-
-
-
-
V
V
V
breakdown voltage
V(BR)CEO collector-emitter
breakdown voltage
V(BR)EBO open-collector
emitter-base
breakdown voltage
ICBO
collector-base
cut-off current
IE = 0 mA; VCB = 4.5 V
-
-
15
nA
hFE
DC current gain
IC = 25 mA; VCE = 2 V
VCB = 2 V; f = 1 MHz
50
-
80
120
-
CCES
collector-emitter
capacitance
385
fF
CEBS
CCBS
fT
emitter-base
capacitance
VEB = 0.5 V; f = 1 MHz
VCB = 2 V; f = 1 MHz
-
-
-
-
-
-
-
-
515
105
25
-
-
-
-
-
-
-
-
fF
collector-base
capacitance
fF
transition frequency IC = 25 mA; VCE = 2 V; f = 2 GHz;
GHz
dB
dB
dB
dB
dBm
Tamb = 25 C
[1]
Gp(max) maximum power
gain
s212
IC = 25 mA; VCE = 2 V; f = 2 GHz;
Tamb = 25 C
22
insertion power gain IC = 25 mA; VCE = 2 V; f = 2 GHz;
18
Tamb = 25 C
NF
noise figure
IC = 2 mA; VCE = 2 V;
f = 900 MHz; S = opt
0.8
1.2
12
IC = 2 mA; VCE = 2 V; f = 2 GHz;
S = opt
[2]
[2]
PL(1dB)
output power at
1 dB gain
compression
IC = 25 mA; VCE = 2 V; f = 2 GHz;
ZS = ZS(opt); ZL = ZL(opt)
IP3
third-order intercept IC = 25 mA; VCE = 2 V; f = 2 GHz;
point ZS = ZS(opt); ZL = ZL(opt)
-
22
-
dBm
[1] Gp(max) is the maximum power gain, if K 1. If K 1 then Gp(max) = MSG, see Figure 8.
[2] ZS is optimized for noise; ZL is optimized for gain.
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
4 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
001aad805
001aad806
40
120
(1)
(2)
(3)
(4)
I
C
h
FE
(mA)
30
(1)
(2)
(3)
80
40
0
(5)
(6)
20
10
0
(7)
(8)
0
1
2
3
4
5
0
10
20
30
40
V
CE
(V)
I (mA)
C
(1) IB = 400 A
(2) B = 350 A
(1)
(2)
V
V
CE = 3 V
CE = 2 V
I
(3) IB = 300 A
(4) IB = 250 A
(3) VCE = 1 V
(5)
IB = 200 A
(6) IB = 150 A
(7) IB = 100 A
(8)
IB = 50 A
Fig 2. Collector current as a function of
Fig 3. DC current gain as a function of collector
current; typical values
collector-emitter voltage; typical values
001aad807
200
C
CBS
(fF)
160
120
80
40
0
0
1
2
3
4
5
V
(V)
CB
f = 1 MHz
Fig 4. Collector-base capacitance as a function of collector-base voltage; typical values
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
5 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
001aad808
001aad809
30
30
MSG
f
G
T
(GHz)
(dB)
2
s
21
20
20
10
10
0
0
2
2
1
10
10
1
10
10
I
(mA)
I (mA)
C
C
VCE = 2 V; f = 2 GHz; Tamb = 25 C
VCE = 2 V; f = 0.9 GHz; Tamb = 25 C
Fig 5. Transition frequency as a function of collector
current; typical values
Fig 6. Gain as a function of collector current; typical
values
001aad810
001aad811
30
50
G
(dB)
G
(dB)
40
G
p(max)
MSG
MSG
20
10
0
2
s
21
30
G
p(max)
20
10
0
2
s
21
2
−1
2
1
10
10
10
1
10
10
I
C
(mA)
f (GHz)
VCE = 2 V; f = 2 GHz; Tamb = 25 C
VCE = 2 V; IC = 25 mA; Tamb = 25 C
Fig 7. Gain as a function of collector current; typical
values
Fig 8. Gain as a function of frequency; typical values
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
6 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
90°
1.0
+1
0.8
135°
45°
+0.5
+2
12 GHz
0.6
0.4
+0.2
+5
0.2
0
0.2
0.5
1
2
100 MHz
5
10
0°
0
180°
−5
−0.2
−2
−0.5
−135°
−45°
−1
1.0
001aad812
−90°
VCE = 2 V; IC = 25 mA; Zo = 50
Fig 9. Common emitter input reflection coefficient (s11); typical values
90°
135°
45°
0.5
0.4
0.3
0.2
0.1
0
180°
0°
100 MHz
12 GHz
−135°
−45°
001aad813
−90°
VCE = 2 V; IC = 25 mA
Fig 10. Common emitter reverse transmission coefficient (s12); typical values
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
7 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
90°
135°
45°
100 MHz
40
50
30
20
10
0
180°
0°
12 GHz
−135°
−45°
001aad814
−90°
VCE = 2 V; IC = 25 mA
Fig 11. Common emitter forward transmission coefficient (s21); typical values
90°
1.0
+1
0.8
135°
45°
+0.5
12 GHz
+2
0.6
0.4
0.2
0
+0.2
+5
0
0.2
0.5
1
2
5
10
0°
180°
100 MHz
−5
−0.2
−2
−0.5
−135°
−45°
−1
1.0
001aad815
−90°
VCE = 2 V; IC = 25 mA; Zo = 50
Fig 12. Common emitter output reflection coefficient (s22); typical values
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
8 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
7.1 Noise data
Table 8.
Noise data
VCE = 2 V; typical values.
f
IC
NFmin
(dB)
0.7
0.81
1
opt
ratio
0.67
0.48
0.28
0.02
0.11
0.19
0.25
0.29
0.56
0.43
0.22
0.06
0.13
0.17
0.22
0.27
rn
(MHz)
900
(mA)
1
(deg)
19.1
()
0.40
0.27
0.24
0.19
0.18
0.18
0.19
0.19
0.36
0.25
0.18
0.19
0.20
0.20
0.21
0.25
2
17.8
4
11.7
10
15
20
25
30
1
1.4
1.65
1.9
2.1
2.3
1.3
1.2
1.2
1.6
1.9
2.2
2.5
2.8
63.9
162.4
165.5
166.3
166.5
57.5
2000
2
57.2
4
60.8
10
15
20
25
30
137.4
162.1
155.5
152.2
150.8
001aad816
3
NF
min
(dB)
2
1
0
(1)
(2)
0
10
20
30
I
(mA)
C
(1) f = 2 GHz
(2) f = 900 MHz
Fig 13. Minimum noise figure as a function of collector current; typical values
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
9 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
8. Package outline
Plastic surface-mounted package; reverse pinning; 4 leads
SOT343R
D
B
E
A
X
H
v
M
A
y
E
e
3
4
Q
A
A
1
c
2
1
L
w
M
B
b
b
1
p
p
e
1
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
A
1
max
A
UNIT
b
b
c
D
E
e
e
H
E
L
Q
v
w
y
p
p
1
1
0.4
0.3
1.1
0.8
0.7
0.5
0.25
0.10
2.2
1.8
1.35
1.15
2.2
2.0
0.45
0.15
0.23
0.13
mm
0.1
1.15
0.2
0.2
0.1
1.3
REFERENCES
JEDEC
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
EIAJ
97-05-21
06-03-16
SOT343R
Fig 14. Package outline SOT343R
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
10 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
9. Revision history
Table 9.
Revision history
Document ID
BFG424W v.2
Modifications:
Release date
Data sheet status
Change notice
Supersedes
20110913
Product data sheet
-
BFG424W v.1
• The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
• Legal texts have been adapted to the new company name where appropriate.
BFG424W v.1
20060321
Product data sheet
-
-
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
11 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
10. Legal information
10.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of an NXP Semiconductors product can reasonably be expected
10.2 Definitions
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
10.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
12 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
10.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
11. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
BFG424W
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 13 September 2011
13 of 14
BFG424W
NXP Semiconductors
NPN 25 GHz wideband transistor
12. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Noise data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Revision history. . . . . . . . . . . . . . . . . . . . . . . . 11
3
4
5
6
7
7.1
8
9
10
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
10.1
10.2
10.3
10.4
11
12
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2011.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 13 September 2011
Document identifier: BFG424W
相关型号：
934059337115
100mA, 50V, 2 CHANNEL, NPN AND PNP, Si, SMALL SIGNAL TRANSISTOR, PLASTIC, SC-74, 6 PIN
NXP
934059689115
100mA, 45V, 2 CHANNEL, NPN, Si, SMALL SIGNAL TRANSISTOR, PLASTIC, SMD, SC-74, 6 PIN
NXP
934059725112
2 CHANNEL, UHF BAND, Si, N-CHANNEL, RF POWER, MOSFET, ROHS COMPLIANT, CERAMIC PACKAGE-4
NXP
934059785115
3.3V, 0.31W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, PLASTIC, SC-90, 2 PIN
NXP
©2020 ICPDF网 联系我们和版权申明