BY359X-1500S [NXP]
Damper diode fast, high-voltage; 阻尼二极管快速,高电压![BY359X-1500S](http://pdffile.icpdf.com/pdf1/p00029/img/icpdf/BY359_151086_icpdf.jpg)
型号: | BY359X-1500S |
厂家: | ![]() |
描述: | Damper diode fast, high-voltage |
文件: | 总5页 (文件大小:44K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Philips Semiconductors
Product specification
Damper diode
fast, high-voltage
BY359X-1500, BY359X-1500S
FEATURES
SYMBOL
QUICK REFERENCE DATA
VR = 1500 V
• Low forward volt drop
• Fast switching
• Soft recovery characteristic
• High thermal cycling performance
• Isolated mounting tab
VF ≤ 1.8 V / 2 V
k
1
a
2
IF(RMS) = 15.7 A
IFSM ≤ 60 A
trr ≤ 600 ns / 350 ns
GENERAL DESCRIPTION
PINNING
SOD113
Glass-passivated double diffused
rectifier diode in a plastic envelope
featuring low forward voltage drop,
fast reverse recovery and soft
recovery characteristic. The device
is intended for use in TV receivers
and PC monitors.
PIN
DESCRIPTION
cathode
anode
isolated
case
1
2
tab
The BY359X series is supplied in
the conventional leaded SOD113
package.
1
2
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER
CONDITIONS
MIN.
MAX. UNIT
VRSM
Peak non-repetitive reverse
voltage
-
1500
V
VRRM
VRWM
IF(peak)
Peak repetitive reverse voltage
Crest working reverse voltage
Peak forward current
-
-
-
-
-
-
-
-
1500
1300
10
V
V
A
A
A
A
A
A
16-32kHz TV
BY359X-1500
31-70kHz monitor
BY359X-1500S
7
IF(RMS)
RMS forward current
15.7
60
60
66
IFRM
Peak repetitive forward current sinusoidal; a = 1.57
IFSM
Peak non-repetitive forward
current
t = 10 ms
t = 8.3 ms
sinusoidal; Tj = 150 ˚C prior to surge;
with reapplied VRWM(max)
Tstg
Tj
Storage temperature
Operating junction temperature
-40
-
150
150
˚C
˚C
ISOLATION LIMITING VALUE & CHARACTERISTIC
Ths = 25 ˚C unless otherwise specified
SYMBOL PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Visol
Cisol
R.M.S. isolation voltage from
f = 50-60 Hz; sinusoidal
waveform;
-
2500
V
both terminals to external
heatsink
R.H. ≤ 65% ; clean and dustfree
Capacitance from both terminals f = 1 MHz
to external heatsink
-
10
-
pF
September 1998
1
Rev 1.300
Philips Semiconductors
Product specification
Damper diode
fast, high-voltage
BY359X-1500, BY359X-1500S
THERMAL RESISTANCES
SYMBOL PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Rth j-hs
Thermal resistance junction to with heatsink compound
-
-
-
-
-
55
4.8
5.9
-
K/W
K/W
K/W
heatsink
without heatsink compound
Rth j-a
Thermal resistance junction to in free air.
ambient
STATIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
BY359X-1500 BY359X-1500S
TYP. MAX. TYP. MAX. UNIT
SYMBOL PARAMETER
CONDITIONS
VF
Forward voltage
IF = 20 A
1.3
1.00
10
1.8
1.5
100
300
1.5
1.25
10
2.0
1.75
100
600
V
V
µA
µA
IF = 10 A; Tj = 150˚C
VR = 1300 V
VR = 1300 V;
Tj = 100 ˚C
IR
Reverse current
50
100
DYNAMIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
BY359X-1500 BY359X-1500S
TYP. MAX. TYP. MAX. UNIT
SYMBOL PARAMETER
CONDITIONS
trr
Qs
Reverse recovery time
Reverse recovery charge
IF = 2 A; VR ≥ 30 V;
-dIF/dt = 20 A/µs
0.47
1.6
0.60
2.0
0.28
0.70
0.35
0.95
µs
µC
Vfr
Peak forward recovery voltage
IF = 10 A;
dIF/dt = 30 A/µs
11.0
-
17.0
-
V
I
dI
F
F
I
F
dt
trr
time
time
time
V
F
Qs
100%
25%
V
fr
I
I
R
V
F
rrm
Fig.1. Definition of trr, Qs and Irrm
Fig.2. Definition of Vfr
September 1998
2
Rev 1.300
Philips Semiconductors
Product specification
Damper diode
fast, high-voltage
BY359X-1500, BY359X-1500S
IF / A
IFS(RMS) / A
80
30
20
10
0
Tj=150C
Tj=25C
70
IFSM
60
50
40
30
20
10
0
typ
max
1ms
10ms
0.1s
1s
10s
0
1.0
2.0
VF / V
tp / s
Fig.3. Maximum non-repetitive rms forward current.
IF = f(tp); sinusoidal current waveform; Tj = 150˚C prior
Fig.5. BY359X-1500 forward characteristic IF = f(VF);
parameter Tj
to surge with reapplied VRWM
.
IF / A
Tj=150C
Tj=25C
30
20
10
0
Transient thermal impedance, Zth j-hs (K/W)
10
1
0.1
typ
p
t
p
t
P
0.01
D
D =
T
max
t
T
0
1.0
2.0
0.001
1us
10us 100us 1ms
10ms 100ms
1s
10s
VF / V
pulse width, tp (s)
Fig.6. BY359X-1500S forward characteristic
IF = f(VF); parameter Tj
Fig.4. Transient thermal impedance Zth = f(tp)
September 1998
3
Rev 1.300
Philips Semiconductors
Product specification
Damper diode
fast, high-voltage
BY359X-1500, BY359X-1500S
MECHANICAL DATA
Dimensions in mm
Net Mass: 2 g
10.3
max
4.6
max
3.2
3.0
2.9 max
2.8
Recesses (2x)
6.4
2.5
0.8 max. depth
15.8
max
seating
plane
15.8
max.
19
max.
3 max.
not tinned
3
2.5
13.5
min.
1
2
M
0.4
1.0 (2x)
0.6
2.5
0.9
0.7
2.54
0.5
5.08
Fig.7. SOD113; The seating plane is electrically isolated from all terminals.
Notes
1. Refer to mounting instructions for F-pack envelopes.
2. Epoxy meets UL94 V0 at 1/8".
September 1998
4
Rev 1.300
Philips Semiconductors
Product specification
Damper diode
fast, high-voltage
BY359X-1500, BY359X-1500S
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
September 1998
5
Rev 1.300
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00061/img/page/BY396_319958_files/BY396_319958_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00061/img/page/BY396_319958_files/BY396_319958_2.jpg)
BY396
SOFT RECOVERY, FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 100 to 800 Volts CURRENT - 3.0 Amperes)
PANJIT
©2020 ICPDF网 联系我们和版权申明