BY559X-1500U [NXP]
Damper diode fast, high-voltage; 阻尼二极管快速，高电压
| 型号： | BY559X-1500U |
| 厂家： | 
NXP |
| 描述： | Damper diode fast, high-voltage |
| 文件： | 总4页 (文件大小：23K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Philips Semiconductors
Objective specification
Damper diode
fast, high-voltage
BY559X-1500U
FEATURES
SYMBOL
QUICK REFERENCE DATA
VR = 1500 V
• Low forward volt drop
• Low forward recovery voltage
• Fast switching
• Soft recovery characteristic
• High thermal cycling performance
• Isolated mounting tab
VF ≤ 1.4 V
k
1
a
2
Vfr ≤ 10 V
trr ≤ 120 ns
IF(PEAK) = 10 A
IFSM ≤ 150 A
GENERAL DESCRIPTION
PINNING
SOD113
A double diffused rectifier diode in
a plastic envelope, featuring fast
forward and reverse recovery and
low forward voltage. The device is
intended for use as a damper diode
in horizontal deflection circuits of
PIN
DESCRIPTION
cathode
anode
isolated
case
1
2
large
screen
monitors
and
tab
workstations .
1
2
The BY559X series is supplied in
the conventional leaded SOD113
package.
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VRRM
VRWM
IF(PEAK)
IFRM
Peak repetitive reverse voltage
-
-
-
-
-
1500
1300
10
V
V
A
A
A
Crest working reverse voltage
Peak working forward current
f = 130 kHz;
Peak repetitive forward current t = 100 µs
Peak non repetitive forward
current
150
160
IFSM
t = 10 ms
sinusoidal; Tj = 150 ˚C prior to
surge; with reapplied VRWM(max)
Tstg
Tj
Storage temperature
Operating junction temperature
-40
-
150
150
˚C
˚C
ISOLATION LIMITING VALUE & CHARACTERISTIC
Ths = 25 ˚C unless otherwise specified
SYMBOL PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Visol
Cisol
R.M.S. isolation voltage from
f = 50-60 Hz; sinusoidal
waveform;
-
2500
V
both terminals to external
heatsink
R.H. ≤ 65% ; clean and dustfree
Capacitance from both terminals f = 1 MHz
to external heatsink
-
10
-
pF
September 1998
1
Rev 1.100
Philips Semiconductors
Objective specification
Damper diode
fast, high-voltage
BY559X-1500U
THERMAL RESISTANCES
SYMBOL PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Rth j-hs
Thermal resistance junction to with heatsink compound
-
-
3.6
K/W
heatsink
Rth j-a
Thermal resistance junction to in free air.
ambient
-
55
-
K/W
STATIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
VF
Forward voltage
IF = 6.5 A
-
-
-
-
1.5
1.2
-
1.8
1.4
0.5
2.0
V
IF = 6.5 A; Tj = 125 ˚C
VR = VRWMmax
V
IR
Reverse current
mA
mA
VR = VRWMmax; Tj = 125 ˚C
-
DYNAMIC CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Vfr
tfr
Forward recovery voltage
Forward recovery time
Reverse recovery time
Reverse recovery charge
IF = 6.5 ; dIF/dt = 50 A/µs
-
-
-
-
6
10
V
IF = 6.5 A; dIF/dt = 50 A/µs; VF = 5 V
IF = 1 A; -dIF/dt = 50 A/µs; VR ≥ 30 V
IF = 2 A; -dIF/dt = 20 A/µs; VR ≥ 30 V
130
90
180
120
0.25
ns
ns
µC
trr
Qs
0.2
September 1998
2
Rev 1.100
Philips Semiconductors
Objective specification
Damper diode
fast, high-voltage
BY559X-1500U
MECHANICAL DATA
Dimensions in mm
Net Mass: 2 g
10.3
max
4.6
max
3.2
3.0
2.9 max
2.8
Recesses (2x)
6.4
2.5
0.8 max. depth
15.8
max
seating
plane
15.8
max.
19
max.
3 max.
not tinned
3
2.5
13.5
min.
1
2
M
0.4
1.0 (2x)
0.6
2.5
0.9
0.7
2.54
0.5
5.08
Fig.1. SOD113; The seating plane is electrically isolated from all terminals.
Notes
1. Refer to mounting instructions for F-pack envelopes.
2. Epoxy meets UL94 V0 at 1/8".
September 1998
3
Rev 1.100
Philips Semiconductors
Objective specification
Damper diode
fast, high-voltage
BY559X-1500U
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
September 1998
4
Rev 1.100
相关型号：
©2020 ICPDF网 联系我们和版权申明