FI1216MK2/HM/PH [NXP]
Desktop video tuner system CCIR B/G; 桌面视频调谐器系统CCIR B / G
| 型号： | FI1216MK2/HM/PH |
| 厂家： | 
NXP |
| 描述： | Desktop video tuner system CCIR B/G |
| 文件： | 总20页 (文件大小：143K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DISPLAY COMPONENTS
DATA SHEET
FI1216MK2
Desktop video tuner
system CCIR B/G
1997 Mar 13
Preliminary specification
Supersedes data of 1996 Feb 16
File under Display Components, DC03
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
FEATURES
• System CCIR B/G
• True 5 V device (low power dissipation)
• Full frequency range from channel 2 (48.25 MHz) to
channel 69 (855.25 MHz)
• PLL controlled tuning
The analog AFC voltage is fed to the 5-level A/D converter
in the PLL tuning IC, so that the AFC status can be read
via the I2C-bus.
• True-synchronous vision IF demodulator (PLL)
• Demodulated video output, AF sound output, second
sound IF output
• I2C-bus control of tuning, address selection, AFC status
information
ORDERING INFORMATION
CATALOGUE
TYPE
DESCRIPTION
• Complies with European regulations on radiation, signal
handling and immunity (“CENELEC 55020, 55013’’ and
‘‘Amtsblatt 15/92”)
NUMBERS
FI1216MK2/HM/PH standard phono 3139 147 13291
FI1216MK2/HM/IEC IEC
3139 147 13301
• Small horizontally mounted metal housing.
MARKING
DESCRIPTION
The following items of information are printed on a sticker
that is on the top cover of the tuner:
The FI1200MK2 family consists of the following types
FI1216MK2, FI1246MK2, FI1256MK2. They are designed
to meet a wide range of RF applications in the PC
Multi-Media environment.
• Type number
• Code number
• Origin letter of factory
• Change code
The FI1216MK2 types are available with a single 75 Ω
input for TV reception. The input connector is available in
either standard phono (female socket) or IEC (female
socket).
• Year and week code.
The tuning and bandswitching are performed through the
built-in digitally controlled I2C-bus. All front-ends meet the
input immunity and radiation of CENELEC.
INTERMEDIATE FREQUENCIES
FREQUENCY(1)
(MHz)
The FI1216MK2 consists of a tuner section and an IF
section, which are all designed on a single PCB. The
front-end is assembled in a metal housing made of a
rectangular tin plated steel frame with front and rear covers
which have soldered contacts to the frame. A single phono
or IEC aerial socket is mounted on one side of the frame.
All other connections are made via pins at the bottom.
SYSTEM
PAL B/G
Picture carrier
Colour
38.90
34.47
33.40
33.16
33.05
Sound 1
Sound 2
NICAM
The tuner section is equipped with 3 tuned RF MOSFET
input stages, with a 3-band mixer-oscillator IC, containing
the oscillators, mixers and IF amplifier. Tuning and band
switching in the tuner section are done with a digital
programmable PLL tuning system. This enables tuning
with step-size programmable between 31.25,
Note
1. The oscillator frequency is above the input signal
frequency.
50.0 or 62.5 kHz. A DC-DC converter is built around the
PLL synthesizer IC to provide the tuning voltage, thus
making the FI1216MK2 front-end a true 5 V device.
CHANNEL COVERAGE
BAND
Low band
CHANNELS
48.25 to 170.00 MHz
170.00 to 450.00 MHz
450.00 to 855.25 MHz
The IF section uses a true-synchronous vision IF
demodulator (PLL) with an intercarrier SAW filter in front
of it.
Mid band
High band
1997 Mar 13
2
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
BLOCK DIAGRAM
LMC27-91
h a n d b o o k , f u l l p a g e w i d t h
1997 Mar 13
3
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
PINNING
SYMBOL
PIN
DESCRIPTION
tuning voltage (monitor)
VT
11
VS
12
supply voltage tuner section +5 V
I2C-bus serial clock
I2C-bus serial data
SCL
SDA
AS
13
14
15
I2C-bus address select
n.c.
21
not connected
2
nd IF sound output
22
second IF sound output
CVBS
23
Composite Video Baseband Signal output
supply voltage IF section +5 V
AF sound output
VIF
24
AF sound output
25
−
TH1, TH2, TH3 and TH4
mounting tags (ground)
1997 Mar 13
4
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
LIMITING VALUES
Limiting values under operational conditions
The tuner can be guaranteed to function properly under the following conditions.
SYMBOL
PARAMETER
PIN
MIN.
4.75
TYP.
5.00
MAX.
5.25
UNIT
VS
supply voltage
V
VS(ripple)
peak-to-peak ripple voltage susceptibility
(at 5 V ±5%); note 1
12
20 Hz to 100 kHz
>100 kHz to 500 kHz
supply current
−
−
−
−
−
−
−
−
20
mV
mV
mA
V
−
10
IS
−
120
+5.25
+5.25
+5
VSCL
VSDA
ISDA
VAS
ZIF
SCL bus input voltage
SDA bus input voltage
SDA bus current (open collector)
address select voltage; note 2
2nd IF sound output load impedance:
DC
13
14
15
−0.3
−0.3
−1
−
V
mA
V
+5.25
22
0.5
0.5
−
−
−
−
kΩ
kΩ
AC
ZCVBS
Composite Video Baseband Signal load
impedance:
DC
−
75
75
−
−
Ω
Ω
ns
V
23
AC
−
−
tL
load time constant
IF supply voltage
−
100
5.25
VIF
4.75
5.0
VIF(ripple)
peak-to-peak ripple voltage susceptibility
(at 5 V ±5%); note 1
24
25
20 Hz to 100 kHz
−
−
−
−
−
−
20
mV
mV
mA
>100 kHz to 500 kHz
10
IIF
IF supply current
100
ZAF
AF sound output load impedance:
DC
AC
1.0
0.6
−
−
−
−
kΩ
kΩ
Notes
1. Sinusoidal ripple voltage superimposed on the 5 V supply voltage in the frequency range of 20 Hz to 500 kHz.
Criteria for TV interference >57 dB.
2. For detailed information about the address decoding, refer to Chapter “Application information”.
1997 Mar 13
5
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Environmental conditions
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
Non-operational conditions
Tamb
RH
gB
ambient temperature
relative humidity
−25
−
−
−
−
+85
°C
−
−
−
−
100
245
490
−
%
bump acceleration
shock acceleration
vibration amplitude
25 g
m/s2
m/s2
mm
gS
50 g
10 to 55 Hz
0.35
Operational conditions
Tamb
RH
ambient temperature
relative humidity
−10
−
−
+60
95
°C
−
%
OVERALL PERFORMANCE
Conditional data
Unless otherwise specified, all electrical values for Chapter “Overall performance” apply at the following conditions.
SYMBOL
PARAMETER
VALUE
25 ±5
UNIT
Tamb
RH
ambient temperature
relative humidity
°C
%
V
60 ±15
5 ±0.125
>75
VS
supply voltage (tuner and IF section)
video output load impedance (DC)
IF sound output load impedance (DC)
pre-heating time (+5 V at pin 24)
ZCVBS
ZIF
Ω
Ω
>500
10
tpr
minute
ZS(AE)
aerial source impedance (unbalanced)
75
Ω
1997 Mar 13
6
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
TUNER SECTION
Tuner characteristics
For detailed information about the PLL programming, refer to Chapter “Application information”.
The desktop video tuner is guaranteed to function properly within the specified operational conditions, but a certain
deterioration of performance parameters may occur at the limits of the operational conditions.
Test equipment
EQUIPMENT
DC voltmeter
PARAMETER
VALUE
UNIT
input impedance
input impedance:
resistance
>1
MΩ
Oscilloscope
>1
MΩ
pF
Ω
capacitance
<15
50
Spectrum analyzer
FET probe
input impedance
input impedance:
resistance
1
MΩ
pF
Ω
capacitance
3.5
50
0
output impedance
voltage gain
dB
1997 Mar 13
7
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
aerial
connector
TP2 TP3
11 12 13 14 15
22 23 24 25
IF
IF
PROBE
output
OUT
1
nF
V
T
V
S
3
kΩ
BU2
SCL
SDA
33
µF
10 nF
TEST JIG
BU5 BU4
BU2
+5 V
BU6
video
out
P
1
kΩ
51
nF
(2)
(1)
SA
DA
CCA010
(1) BU4 loaded with 75 Ω.
(2) 50 µs de-emphasis.
SA = spectrum analyzer.
P = FET probe.
DA = distortion analyzer.
Fig.2 Typical test set up.
8
1997 Mar 13
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Definitions of test signals (see Fig.2)
MODULATION
FREQ.
TEST SIGNAL
AMPLITUDE
(MHz)
VIDEO
AUDIO
A0: unmodulated vision
carrier
480.25 60 dBµV
A1: CCIR B/G standard signal 480.25 60 dBµV
100% (rest carrier 10%)
2T pulse and bar
with video modulation
(top sync)
B1: unmodulated sound
carrier B/G system
485.75 −13 dB w.r.t.
A0 to A1
B2: FM modulated sound
carrier B/G system
485.75 −13 dB w.r.t.
1 kHz; modulation frequency
deviation ±27 kHz;
A0 to A1
50 µs pre-emphasis
B3: unmodulated sound
carrier B/G system
478.75 −13 dB w.r.t.
A0 to A1
Aerial input characteristics
SYMBOL
PARAMETER
CONDITIONS
MIN. MAX. UNIT
VSWR
reflection coefficient
referred to 75 Ω impedance (worst case on or between
−
5
picture and sound carrier at maximum gain)
VPSM
Vant
surge protection voltage
5
−
kV
antenna connection
disturbance voltage
<1.75 GHz
−
46
dBµV
1997 Mar 13
9
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
General characteristics
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
fb
frequency range:
low band
48.25
−
−
−
168.25
447.25
855.25
MHz
MHz
MHz
mid band
175.25
455.25
high band
∆fb
margin:
for low band
for mid/high band
1.5
3
−
−
−
−
MHz
MHz
αi
image rejection (nominal gain to 10 dB
gain reduction):
low band
70
66
60
50
60
−
−
−
−
−
−
−
−
−
−
dB
dB
dB
dB
dB
mid band
<300 MHz
>300 MHz
mid band
high band
αIF
IF rejection (picture)
1⁄2 IF susceptibility:
E2 to E12
ZIF
75
60
−
−
−
−
dBµV
dBµV
E21 to E69
αS
sound-chrominance moiré rejection:
off-air
up to 40 dB gain control 56
−
−
−
−
dB
dB
UHF
up to 30 dB minimum
gain control
56
mx
cross modulation:
in-channel
70
−
−
dBµV
in-band
low band (n ±2)
78
78
84
−
−
−
−
−
−
−
−
dBµV
dBµV
dBµV
dBµV
mid band (n ±3)
high band (n ±5)
out of band
100
breakthrough susceptibility:
E2 to E12; E21 to E69
oscillator voltage at all pins
oscillators lock-in time
60
−
−
−
−
−
dBµV
dBµV
ms
Vosc
tli
70
150
charge pump set logic
HIGH
−
αvs
the video signal-to-sound interference
ratio with the tuner exposed to sound
signals in the audio frequency range
100 Hz to 10 kHz and sound pressure
levels up to 105 dB (20 µPa)
40
−
−
−
dB
VESD
electrostatic discharge (ESD)
on all pins
note 1
2
−
kV
Note
1. All the pins of the desktop video tuner are protected against electrostatic discharge (ESD) up to 2 kV. The product is
classified in category B (‘‘MIL-STD-883C”).
1997 Mar 13
10
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Video and audio characteristics (see Fig.2)
TEST
POINT
PARAMETER
TEST SIGNAL
MIN. TYP. MAX. UNIT
CVBS characteristics:
video amplitude signal at pin 23
DC level sync pulse at pin 23
A1 (peak-to-peak value) BU4
0.7
−
1.1
V
V
A1
BU4
−
0.35
−
Video amplitude drop with respect to modulation
0.1 MHz at Tamb = 45 °C:
at 1 MHz
at 2 MHz
A1
BU4
BU4
BU4
BU4
BU4
BU4
BU4
−1.0
−1.5
−2.5
−3.0
−4.0
40
−
−
−
−
−
−
−
+1.0 dB
+1.5 dB
+1.5 dB
+2.0 dB
+2.0 dB
A1
at 3 MHz
A1
at 4 MHz
A1
at 4.43 MHz
Sound carrier rejection
A1
A1 (1 MHz) + B1
A1 + B3
−
dB
Residual 40.4 MHz signal in video channel:
level of 1.5 MHz
−
68
dBµV
Residual 77.8 MHz signal in video channel
A1
BU4
BU5
−
−
−
80
dBµV
dBµV
Second IF sound output level at level of 5.5 MHz A1 + B1
84
−
Test on 2T pulse at Tamb = 45 °C:
2T pulse/bar response
2T pulse response
A1
BU4
BU4
BU4
BU4
−2.5
−
−
−
−
−
+2.5
+3.0
−
%
A1
%
CVBS S/N (unweighted)
A1 + B1
A1
41
−
dB
Gain limited sensitivity at 1 dB reduction
of video output
30
dBµV
Audio characteristics:
AF output level measured via LP 20 kHz filter,
RMS detector, 50 µs de-emphasis
A1 + B2
BU6
BU6
0.25 0.35 0.50
V
THD (Total Harmonic Distortion) measured via A1 + B2
LP 20 kHz filter, RMS detector, 50 µs
de-emphasis
−
−
0.5
%
S/N measured via CCIR filter, peak
CCIR detector, 50 µs de-emphasis
A1 (6 kHz sine wave,
black-to-white) + B1
BU6
BU6
BU6
41
16
40
−
−
−
−
−
−
dB
AF 3 dB response measured via LP 20 kHz filter, A1 (black) + B1
RMS detector, de-emphasis off
kHz
dB
AM suppression ratio
A1 + B2
Digital AFC status
FREQUENCY
(kHz)
DIGITAL
READ-OUT
PARAMETER
ADC word at I2C-bus during read operation
CONDITIONS
input voltage at pin 10: 0.0 to 0.15VS
input voltage at pin 10: 0.15 to 0.30VS
input voltage at pin 10: 0.30 to 0.45VS
input voltage at pin 10: 0.45 to 0.60VS
input voltage at pin 10: 0.60 to 1.00VS
−125
−62.5
0
00
01
02
03
04
+62.5
+125
1997 Mar 13
11
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
APPLICATION INFORMATION
A detailed description of the I2C-bus specification, with applications, is given in brochure ‘‘The I2C-bus and how to
use it’’. This brochure may be ordered using the code number 9398 393 40011.
WRITE mode
BITS
BYTE
7
MSB
0
LSB
6
5
4
3
2
1
A(1)
Address byte
1
0
1
0
0
0
MA1
n10
n2
MA0
n9
0
A
A
A
A
A
Program divider byte 1
Program divider byte 2
Control information byte 1
Control information byte 2
n14
n6
n13
n5
n12
n4
n11
n3
n8
n0
OS
P0
n7
1
n1
CP
P6
T2
P5
T1
P4
T0
P3
RSA
P2
RSB
P1
P7
Note
1. A = Acknowledge.
ADDRESS SELECTION
VS = +5 V (PLL supply voltage).
MA1
MA0
ADDRESS
VOLTAGE AT PIN 15
0
0
1
1
0
1
0
1
C0
C2
C4
C6
0.0VS to 0.1VS
0.2VS to 0.3VS
0.4VS to 0.6VS
0.9VS to 1.0VS
PROGRAMMABLE DIVIDER SETTINGS (BYTES 1 AND 2)
Divider ratio:
N = 16 × {fRF(pc) + fIF(pc)}, where (pc) is picture carrier and fRF and fIF are expressed in MHz
fosc = N⁄16 (MHz).
N = (8192 × n13) + (4096 × n12) + (2048 × n11) + (1024 × n10) + (512 × n9) + (256 × n8) + (128 × n7) + (64 × n6) +
(32 × n5) + (16 × n4) + (8 × n3) + (4 × n2) + (2 × n1) + n0
CONTROL BYTE
Charge pump settings:
CP = 1, for fast tuning
CP = 0, for moderate speed tuning with slightly better residual oscillator FM.
Test mode settings:
T2 = T1 = 0; T0 = 1, for normal operation.
PLL disabling:
OS = 0, for normal operation
OS = 1, for switching the charge pump to the high impedance state.
1997 Mar 13
12
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Ratio select bits
RSA
RSB
STEP SIZE
X
0
1
0
1
1
50 kHz
31.25 kHz (for slow picture search)
62.5 kHz (for normal picture search)
PORTS BYTE
Band switching
BAND
BIT(1)
P0
P1
P2
P3(2)
P4
P5
P6
P7
Low band
Mid band
High band
0
0
0
0
0
0
0
0
0
X
X
X
0
1
1
1
0
1
0
0
0
1
1
0
Notes
1. X = don’t care; P0 to P7 are output ports on the PLL device.
2. P3 is a system switch output for customer applications.
TELEGRAM EXAMPLES (WRITE MODE)
Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb - Ack - Pb - Ack - Stop.
Start - Adb - Ack - Cb - Ack - Pb - Ack - Db1 - Ack - Db2 - Ack - Stop.
Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb - Ack - Stop.
Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Stop.
Where:
Start = start condition
Adb = address byte
Ack = acknowledge
Db1 = divider byte 1
Db2 = divider byte 2
Cb = control byte
Pb = ports byte
Stop = stop condition.
Remark: for channel selection involving band switching, and to ensure smooth tuning to the desired channel without
causing unnecessary charge pump action, it is recommended to consider the difference between wanted channel
frequency (fw) and the current channel frequency (fc):
• If fw > fc, use telegram as:
Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb - Ack - Pb - Ack - Stop.
• If fw < fc, use telegram as:
Start - Adb - Ack - Cb - Ack - Pb - Ack - Db1 - Ack - Db2 - Ack - Stop.
Unnecessary charge pump action will result in very low tuning voltage (VT ≈ 0 V) which may drive the oscillator to extreme
conditions.
1997 Mar 13
13
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
READ mode
The in-lock can be read by setting the R/W bit to 1.
BITS
3
BYTE
7
0
6
5
4
2
1
A(5)
LSB
MSB
Address byte
Status byte
1
1
FL(2)
0
I2(3)
0
I1(3)
0
I0(3)
MA1
A2(4)
MA0
A1(4)
1
A0(4)
A
A
POR(1)
Notes
1. POR = Power On Reset. POR is internally set to 1 in case VS drops below 3 V. The POR bit is reset when an end of
data is detected by the PLL IC.
2. FL = In-lock flag; FL = 1: loop is phase-locked. The loop must be phase-locked during at least 8 periods of the internal
7.8125 kHz reference frequency before the FL flag is internally set to 1.
3. I2, I1 and I0 = digital information for I/O ports P2, P1 and P0 respectively.
4. A2, A1 and A0 = built-in 5-level A/D converter on I/O port P6. AFC information to the controller of the IF section is
available on pin 10 (see Table “Digital AFC status”).
5. A = Acknowledge.
TELEGRAM EXAMPLES (READ MODE)
Start - Adb - Ack - STB - Ack - STB - - Stop (no Ack from processor = End-of-data).
Start - Adb - Ack - STB - - Stop (no Ack from processor = End-of-data).
Where:
STB = Status byte.
Video buffer
A video buffer is built into the video module to enable the
unit to drive a 75 Ω load directly. In case it is required to
handbook, halfpage
V
CC
use the FI1216MK2 as a replacement for the FI1216 in the
same videocard, it is necessary to replace the 75 Ω series
R1
R3
resistor in the video card by a 0 Ω series resistor. At the
same time the 22 kΩ series resistor in the tuning supply
15
AS
100 Ω
C1
56 pF
R2
must be removed.
I2C-bus load
The FI1216MK2 contains a series resistor (R = 100 Ω) in
the SCL and SDA lines. Both lines also have a capacitive
load of typical 56 pF (see Fig.3).
C2
56 pF
R4
14
13
SDA
SCL
100 Ω
R5
100 Ω
C3
56 pF
PLL IC
MBH031
Fig.3 I2C-bus load.
1997 Mar 13
14
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
MECHANICAL DATA
+0.2
0
33.7
h
25.9
20.6
16.6
15.8
10.4
9.7
11.5
30.8
+0.2
0
31.6
34.2
27.6
(1)
8.1
± 0.3
26.9
(1)
8.35
78.4
STANDARD PHONO CONNECTOR
14.4
2.5
2
0.8
± 0.2
0.5
(2)
5.1
7.9
11
4
14.7
IEC CONNECTOR
59.2
13.5 max
12.9 max
5.2
6
(2×)
+0.10
−0.04
6.35
(0.6)
1.5
1.5 (2×)
(2×)
1
TH2
8.5
± 0.2
34.7 38.5
45.4
41
28.55
2.6
3 (2×)
2.6
TH4
TH3
1.1
11 12 13 14 15
21 22 23 24 25
4.445
5
MGB515 - 1
0.64 × 0.64
84.5
89.2
Dimensions in mm.
(1) Standard phono socket female 75 Ω.
(2) Alternative IEC connection.
Fig.4 Mechanical outline FI-versions.
15
1997 Mar 13
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Aerial connections
Mass
Standard-phono socket female 75 Ω or IEC (female).
Approximately 50 g.
Solderability
Robustness of pins
The solderability of pins and mounting tags when tested
initially and after 16 hours steam ageing in accordance
with ‘‘IEC 68-2-20’’, test Ta, method 1 (solder bath 235 °C
for 2 s), results in a wetted area of 95%. No de-wetting will
occur when soldered at 260 °C for 5 s.
The pins will not be damaged when tested in accordance
with ‘‘IEC 68-2-21’’:
• Test Ua1, tensile of 10 N in axial direction
• Test Ua2, thrust of 4 N in axial direction.
Punching pattern of chassis PCB
Resistance to soldering heat
Field rejects are often related to broken tag joints.
Therefore, the following punching pattern is recommended
(see Fig.5).
The product will not be damaged when tested in
accordance with ‘‘IEC 68-2-20’’, test Tb, method 1A
(solder bath 260 °C for 10 ±1 s).
78.4
3.4
0.9
2.3
2
34.7
unit
contour
2.1
1.1
2.6
MGB514 - 1
14.7
4.445
59.2
Dimensions in mm.
Fig.5 Punching pattern seen from solder side.
1997 Mar 13
16
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
TV CHANNEL FREQUENCIES (MHz)
CCIR cable
Vision IF = 38.90 MHz; sound IF = 33.40 MHz.
PICTURE
CARRIER
FREQUENCY FREQUENCY
SOUND
CARRIER
PICTURE
CARRIER
FREQUENCY FREQUENCY
SOUND
CARRIER
FREQ.
RANGE
FREQ.
RANGE
CHANNEL
CHANNEL
E2
47-54
48.25
55.25
53.75
60.75
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
258-265
265-272
272-279
279-286
286-293
293-300
302-310
310-318
318-326
326-334
334-342
342-350
350-358
358-366
366-374
374-382
382-390
390-398
398-406
406-414
414-422
422-430
430-438
438-446
446-454
454-462
462-470
259.25
266.25
273.25
280.25
287.25
294.25
303.25
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
264.75
271.75
278.75
285.75
292.75
299.75
308.75
316.75
324.75
332.75
340.75
348.75
356.75
364.75
372.75
380.75
388.75
396.75
404.75
412.75
420.75
428.75
436.75
444.75
452.75
460.75
468.75
E3
54-61
E4
61-68
62.25
67.75
S01
S02
S03
S1
68-75
69.25
74.75
75-82
76.25
81.75
82-89
83.25
88.75
104-111
111-118
118-125
125-132
132-139
139-146
146-153
153-160
160-167
167-174
174-181
181-188
188-195
195-202
202-209
209-216
216-223
223-230
230-237
237-244
244-251
251-258
105.25
112.25
119.25
126.25
133.25
140.25
147.25
154.25
161.25
168.25
175.25
182.25
189.25
196.25
203.25
210.25
217.25
224.25
231.25
238.25
245.25
252.25
110.75
117.75
124.75
131.75
138.75
145.75
152.75
159.75
166.75
173.75
180.75
187.75
194.75
201.75
208.75
215.75
222.75
229.75
236.75
243.75
250.75
257.75
S2
S3
S4
S5
S6
S7
S8
S9
S10
E5
E6
E7
E8
E9
E10
E11
E12
S11
S12
S13
S14
1997 Mar 13
17
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
CCIR B/G
Vision IF = 38.90 MHz; sound IF = 33.40 MHz.
PICTURE
CARRIER
FREQUENCY FREQUENCY
SOUND
CARRIER
PICTURE
CARRIER
FREQUENCY FREQUENCY
SOUND
CARRIER
FREQ.
RANGE
FREQ.
RANGE
CHANNEL
CHANNEL
2
47-54
48.25
55.25
53.75
60.75
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
622-630
630-638
638-646
646-654
654-662
662-670
670-678
678-686
686-694
694-702
702-710
710-718
718-726
726-734
734-742
742-750
750-758
758-766
766-774
774-782
782-790
790-798
798-806
806-814
814-822
822-830
830-838
838-846
846-854
854-862
623.25
631.25
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
628.75
636.75
644.75
652.75
660.75
668.75
676.75
684.75
692.75
700.75
708.75
716.75
724.75
732.75
740.75
748.75
756.75
764.75
772.75
780.75
788.75
796.75
804.75
812.75
820.75
828.75
836.75
844.75
852.75
860.75
3
54-61
4
61-68
62.25
67.75
5
174-181
181-188
188-195
195-202
202-209
209-216
216-223
223-230
470-478
478-486
486-494
494-502
502-510
510-518
518-526
526-534
534-542
542-550
550-558
558-566
566-574
574-582
582-590
590-598
598-606
606-614
614-622
175.25
182.25
189.25
196.25
203.25
210.25
217.25
224.25
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
180.75
187.75
194.75
201.75
208.75
215.75
222.75
229.75
476.75
484.75
492.75
500.75
508.75
516.75
524.75
532.75
540.75
548.75
556.75
564.75
572.75
580.75
588.75
596.75
604.75
612.75
620.75
6
7
8
9
10
11
12
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
1997 Mar 13
18
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Italy
Vision IF = 38.90 MHz; sound IF = 33.40 MHz.
CHANNEL
PICTURE CARRIER FREQUENCY
SOUND CARRIER FREQUENCY
A
B
C
D
E
F
53.75
62.25
59.25
67.75
82.25
87.75
175.25
183.75
197.25
201.25
210.25
217.25
224.25
180.75
189.25
192.75
206.75
215.75
222.75
229.75
G
H
H1
H2
DEFINITIONS
Data sheet status
Objective specification
Preliminary specification
Product specification
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
PURCHASE OF PHILIPS I2C COMPONENTS
Purchase of Philips I2C components conveys a license under the Philips’ I2C patent to use the
components in the I2C system provided the system conforms to the I2C specification defined by
Philips. This specification can be ordered using the code 9398 393 40011.
1997 Mar 13
19
Philips Components – a worldwide company
Argentina: Ierod, BUENOS AIRES,
Pakistan: Philips Electrical Industries of Pakistan Ltd., KARACHI,
Tel. (01) 786 7635, Fax. (01) 786 9397.
Tel. (021) 587 4641-49, Fax. (021) 577 035/587 4546.
Australia: Philips Components Pty Ltd, NORTH RYDE,
Philippines: Philips Semiconductors Philippines Inc.,
Tel. (02) 9805 4455, Fax. (02) 9805 4466.
METRO MANILA, Tel. (02) 816 6380, Fax. (02) 817 3474.
Austria: Österreichische Philips Industrie GmbH, WIEN,
Poland: Philips Poland Sp. z.o.o., WARSZAWA,
Tel. (01) 601 01 12 41, Fax. (01) 60 101 12 11.
Tel. (022) 612 2594, Fax. (022) 612 2327.
Belarus: Philips Office Belarus, MINSK,
Portugal: Philips Portuguesa S.A.,
Tel. (5172) 200 915, Fax. (5172) 200 773.
Philips Components: LINDA-A-VELHA,
Tel. (01) 416 3160/416 3333, Fax. (01) 416 3174/416 3366.
Benelux: Philips Nederland B.V., EINDHOVEN, NL.,
Tel. (+31 40) 2783 749, Fax. (+31 40) 2788 399.
Russia: Philips Russia, MOSCOW,
Tel. (095) 247 9124, Fax. (095) 247 9132.
Brazil: Philips Components, SÃO PAULO,
Tel. (011) 821 2333, Fax. (011) 829 1849.
Singapore: Philips Singapore Pte Ltd., SINGAPORE,
Tel. 350 2000, Fax. 355 1758.
Canada: Philips Electronics Ltd., SCARBOROUGH,
Tel. (0416) 292 5161, Fax. (0416) 754 6248.
South Africa: S.A. Philips Pty Ltd., JOHANNESBURG,
Tel. (011) 470 5911, Fax. (011) 470 5494.
China: Philips Company, SHANGHAI,
Tel. (021) 6485 0600, Fax. (021) 6485 5615.
Spain: Philips Components, BARCELONA,
Tel. (93) 301 63 12, Fax. (93) 301 42 43.
Colombia: Iprelenso Ltda, SANTAFE DE BOGOTA,
Tel. (01) 345 8713, Fax. (01) 345 8712.
Sweden: Philips Components AB, STOCKHOLM,
Tel. (+46) 8 632 2000, Fax. (+46) 8 632 2745.
Denmark: Philips Components A/S, COPENHAGEN S,
Tel. (32) 883 333, Fax. (31) 571 949.
Switzerland: Philips Components AG, ZÜRICH,
Tel. (01) 488 22 11, Fax. (01) 481 77 30.
Finland: Philips Components, ESPOO,
Tel. 9 (0)-615 800, Fax. 9 (0)-615 80510.
Taiwan: Philips Taiwan Ltd., TAIPEI,
Tel. (02) 388 7666, Fax. (02) 382 4382.
France: Philips Composants, SURESNES,
Tel. (01) 4099 6161, Fax. (01) 4099 6427.
Thailand: Philips Electronics (Thailand) Ltd., BANGKOK,
Tel. (02) 745 4090, Fax. (02) 398 0793.
Germany: Philips Components GmbH, HAMBURG,
Tel. (040) 2489-0, Fax. (040) 2489 1400.
Turkey: Türk Philips Ticaret A.S., GÜLTEPE/ISTANBUL,
Tel. (0212) 279 2770, Fax. (0212) 282 6707.
Greece: Philips Hellas S.A., TAVROS,
Tel. (01) 4894 339/(01) 4894 239, Fax. (01) 4814 240.
Ukraine: Philips Ukraine Ltd., KIEV,
Tel. (044) 268 7327, Fax. (044) 268 6323.
Hong Kong: Philips Hong Kong, KOWLOON,
Tel. 2784 3000, Fax. 2784 3003.
United Kingdom: Philips Components Ltd., DORKING,
Tel. (01306) 512 000, Fax. (01306) 512 345.
India: Philips India Ltd., BOMBAY,
Tel. (022) 4938 541, Fax. (022) 4938 722.
United States:
• Philips Components, JUPITER, FL,
Tel. (561) 745 3300, Fax. (561) 745 3600.
• For literature: (800) 447 3762.
Indonesia: P.T. Philips Development Corp., JAKARTA,
Tel. (021) 520 1122, Fax. (021) 520 5189.
Ireland: Philips Electronics (Ireland) Ltd., DUBLIN,
• Display and Wire Wound Components, ANN ARBOR, MI,
Tel. (313) 996 9400, Fax. (313) 761 2776.
Tel. (01) 76 40 203, Fax. (01) 76 40 210.
Israel: Rapac Electronics Ltd., TEL AVIV,
• Magnetic Products, SAUGERTIES, NY,
Tel. (914) 246 2811, Fax. (914) 246 0487.
Tel. (03) 6450 444, Fax. (03) 6491 007.
Italy: Philips Components S.r.l., MILANO,
Uruguay: Philips Components, MONTEVIDEO,
Tel. (02) 6752 2531, Fax. (02) 6752 2557.
Tel. (02) 704 044, Fax. (02) 920 601.
Japan: Philips Japan Ltd., TOKYO,
Tel. (03) 3740 5028, Fax. (03) 3740 0580.
For all other countries apply to: Philips Components,
Marketing Communications, P.O. Box 218, 5600 MD EINDHOVEN,
The Netherlands, Fax. +31-40-2724 547.
Korea (Republic of): Philips Electronics (Korea) Ltd., SEOUL,
Tel. (02) 709 -1472, Fax. (02) 709 1480.
COD11
© Philips Electronics N.V. 1997
Malaysia: Philips Malaysia SDN Berhad
Components Division, PULAU PINANG,
Tel. (04) 657 0055, Fax. (04) 656 5951.
All rights are reserved. Reproduction in whole or in part is prohibited without the
prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or
contract, is believed to be accurate and reliable and may be changed without notice.
No liability will be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent- or other industrial or
intellectual property rights.
Mexico: Philips Components, EL PASO, U.S.A.,
Tel. (915) 772 4020, Fax. (915) 772 4332.
New Zealand: Philips New Zealand Ltd., AUCKLAND,
Tel. (09) 849 4160, Fax. (09) 849 7811.
Norway: Norsk A/S Philips, OSLO,
Printed in The Netherlands
Tel. (22) 74 8000, Fax. (22) 74 8341.
相关型号：
©2020 ICPDF网 联系我们和版权申明