KM110BH2470 [NXP]
30∑ and 70∑ angle sensor hybrids; 30°和70°角传感器杂种型号: | KM110BH2470 |
厂家: | NXP |
描述: | 30∑ and 70∑ angle sensor hybrids |
文件: | 总12页 (文件大小:111K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DISCRETE SEMICONDUCTORS
DATA SHEET
KM110BH/2430; KM110BH/2470
30° and 70° angle sensor hybrids
1996 Nov 08
Preliminary specification
Supersedes data of November 1994
File under Discrete Semiconductors, SC17
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
FEATURES
• Angle measuring range 30° or 70°
• Contactless, therefore wear-free and no microlinearity
problems
• Easy to mount, ready for use
• Analog voltage output signal
• Operating temperatures up to 125 °C
andbook, halfpage
• Precision of ± 0.5° in the temperature range
(−15° ≤ α ≤ +15°)
• EMC resistant
• Sample kit with magnet available.
DESCRIPTION
The KM110BH/2430 and the KM110BH/2470 are sensor
modules for contactless measurement of angular
displacements of strong magnetic fields. The modules are
a ready-trimmed (sensitivity and zero point) combination of
a magnetoresistive KMZ sensor and a signal conditioning
circuit in hybrid technology.
The KM110BH/2430 delivers a voltage output signal which
is a linear function of the direction of the magnetic field.
The KM110BH/2470 delivers a sinusoidal voltage output
signal. The modules can be used for contactless angle
measurement.
1
2
3
MBD897
PINNING
PIN
SYMBOL
DESCRIPTION
ground
1
2
3
GND
VCC
VO
DC supply voltage
output voltage
Fig.1 Simplified outline.
QUICK REFERENCE DATA
SYMBOL
PARAMETER
MIN.
TYP.
MAX.
UNIT
VCC
Toper
α
DC supply voltage
operating temperature
4.5
5
16
V
−40
−
+125
°C
angle range:
KM110BH/2430
KM110BH/2470
output voltage range
−
−
−
−15 to +15
−35 to +35
0.5 to 4.5
−
−
−
deg
deg
V
VO
1996 Nov 08
2
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
EMC RESISTIVITY
The EMC compatibility is dependent on the assembly of the sensors. The EMC resistivity has to be tested in the final
application.
BLOCK DIAGRAM
angle
range
temperature
compensation
current
limiter
sensor
V
V
CC
O
GND
MBB577
Fig.2 Block diagram.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL PARAMETER MIN.
VCC DC supply voltage
MAX.
UNIT
4.5
−
16
V
ICC
supply current
15
mA
°C
°C
Tstg
Toper
storage temperature
−40
−40
+125
+125
operating temperature; note 1
output short-circuit duration
permanent; see note 2
Notes
1. For operations above Toper = 100 °C, maximum VCC derates linearly from 16 V to 5 V at Toper = 125 °C.
2. If pin 3 is shorted to either pin 1 or pin 2, a current may flow permanently, without damaging the device.
1996 Nov 08
3
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
CHARACTERISTICS
Tamb = 25 °C; VCC = 5 V; RL = 1.7 kΩ and a homogeneous magnetic field Hext = 100 kA/m in the sensitive layer of the
KMZ sensor, unless otherwise specified.
SYMBOL
PARAMETER
angle range:
CONDITIONS
MIN.
TYP.
MAX.
UNIT
α
note 1
KM110BH/2430
KM110BH/2470
output voltage range:
KM110BH/2430
KM110BH/2470
zero point voltage
−
−
−15 to +15
−35 to +35
−
−
deg
deg
VO
linear; see Fig.4
sinusoidal; see Fig.5
α = 0°
−
−
−
0.5 to 4.5
0.5 to 4.5
2.5
−
−
−
V
V
V
Vzero
Voff
zero point offset voltage: related to sinusoidal sensor
characteristic; see Fig.5
KM110BH/2430
−
−
−
±25
±15
1
−
−
3
mV
mV
deg
KM110BH/2470
αoff
zero point offset angle
related to hybrid edges;
see Fig.7
S
sensitivity:
α = 0°; note 2
−20 to +100 °C
note 3
KM110BH/2430
KM110BH/2470
precision:
137
73
−
140
143
76
mV/deg
mV/deg
74.5
P
KM110BH/2430
KM110BH/2470
deviation of linearity:
KM110BH/2430
KM110BH/2470
reproducibility
resolution
0.2
0.5
0.5
1.2
deg
deg
FL
−
−
−
−
−
±1
−
−
−
−
−
% FS
% FS
deg
−
Rp
α = 0°; note 4
α = 0°; note 5
α = 0°; note 6
<0.001
<0.001
<0.05
Rs
deg
FH
hysteresis
deg
SPmax
maximum angular speed:
KM110BH/2430
KM110BH/2470
load resistance
load capacitance
−
60
150
−
−
deg/ms
deg/ms
kΩ
−
−
RL
CL
1.7
−
−
−
10
nF
Temperature coefficients (−40 to +100 °C)
TCVzero
temperature coefficient
of zero point voltage:
KM110BH/2430
KM110BH/2470
−
−
−
0.2
0.6
0.3
−
mV/K
mV/K
K−1
0.1
100 × 10−6
TCS
temperature coefficient
of sensitivity
−20 to 100 °C
1996 Nov 08
4
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
Notes to the characteristics
1. Refer to Fig.3. The magnetic field Hext = 100 kA/m can be achieved using the magnets listed in Table 1.
2. The sensitivity will change slightly with +0.33% per 10% magnetic field increase if Hext deviates from 100 kA/m.
3. Deviation from best straight line in angle range.
4. Difference in output signal (expressed in degrees) between two zero point (α = 0°) measurements, in which the zero
point is approached from the same side of the measuring range (e.g. cycle: +15°
5. The smallest detectable change of angle ∆α for α = 0° (cycle: 0° ∆α).
6. As note 4, but with the zero point being approached from the upper end and lower end of the measuring range
0°
+15°
0°).
respectively (cycle: +15°
0°
−15°
0°).
d
S
N
1
2
3
MBD900
α
Fig.3 Optimum magnet position relative to the sensor module.
1996 Nov 08
5
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
MBD891
MBD890
5
5
handbook, halfpage
handbook, halfpage
V
O
(V)
V
O
(V)
4
4
3
2
3
2
1
1
0
0
50
30
0
30
50
(deg)
α
−30
−15
0
15
30
α (deg)
Fig.4 KM110BH/2430 output signal as a function
of angle position.
Fig.5 KM110BH/2470 output signal as a function
of angle position.
MBD888
2
handbook, halfpage
∆α
(deg)
1
0
KM110BH/2430
KM110BH/2470
–1
–2
–40
–20
0
20
40
α
(deg)
Tamb = −25 to +85 °C.
α = 0° for Tamb = 25 °C and VO = 2.5 V.
∆α increases by a factor 2 in the temperature range:
VO = 2.5 + 2.128 × sin(2α) for −36.5 ° ≤ α ≤ +36.5°.
Tamb = 25 °C; VCC = 5 V; Hext = 100 kA/m.
Fig.6 Maximum angle error ∆α as a function of the angle position.
1996 Nov 08
6
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
handbook, halfpage
D
17.0
0.1
11.8
0.25
E
3.3
0.1
F
2.55 0.1
1
2
3
MBD899
10.15 0.25
Dimensions in mm.
D, E, F : reference points for sensor assembly.
D, E : definition of reference side for angle α.
Fig.7 Reference data for hybrid assembly and magnet positioning.
Table 1 Magnets for angle sensor hybrid
DIMENSIONS(1)
(mm)
d(2)
(mm)
TOLERANCE(3)
d (mm)
ECCENTRICITY(4)
(mm)
Tamb
(°C)
MATERIAL
Sm2Co17
11.2 × 5.5 × 8
2.1
0.7
0.5
±0.30
±0.25
±0.15
±0.20
−55 to +125
6 × 3 × 5
±0.15
±0.30
8 × 3 × 7.5
Notes
1. The magnetization is always parallel to the latter dimensions given.
2. Distance (d) between magnet and KMZ sensor front as shown in Fig.3.
3. Maximum deviation of distance (d) for which the change in sensor output signal is smaller than 0.5% of full scale
sensor signal.
4. Maximum deviation of magnet rotational axis to sensor rotational axis for which the change in sensor output signal
is smaller than 0.5% of full scale sensor signal.
1996 Nov 08
7
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
APPLICATION INFORMATION
The sensor hybrids KM110BH/2430 and KM110BH/2470
are available with different electrical contacts:
V
handbook, halfpage
O
V
O
V
SENSOR
1. Stretched pins with a pitch of 2.54 mm; these pins are
recommended for connector and/or cable connections
(see Fig.9).
CC
R
L
2. Double ’s’ bent pins (see Fig.10) with a pitch of
5.71 mm; bent pins are recommended for rigid
soldered connections to compensate for mechanical
stress. Quote type numbers KM110BH/2430G and
KM110BH/2470G respectively for these hybrids.
MBD834
GND
Fig.8 Application circuit.
1996 Nov 08
8
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
PACKAGE OUTLINES
0.20
0.05
20.3
2.0 max
10.15 0.25
0.7 0.05
0.5
min
A
0.20
0.05
23.6
11.8
0.25
0.1
0
1
0.8
0.8
min
1.8 max
min
0.10
0.05
1.1
(1)
0.55
(1)
0.3
0.25
0.05
MBD895
(1)
7.61
0.3
(2)
(2)
2.54
2.54
Dimensions in mm.
Area ’A’ free of SMD devices.
(1) Dimension before bath soldering, maximum dimension after bath soldering: 0.7 mm.
(2) Pitch tolerance: ± 0.2 mm.
Fig.9 Outline of KM110BH/2430 and KM110BH/2470.
9
1996 Nov 08
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
0.20
0.05
20.3
2.0 max
10.15 0.25
0.7 0.05
0.5
min
A
0.20
23.6
0.05
11.8
0.25
0.1
0
1
0.8
min
0.8
min
0.10
0.05
1.1
(1)
0.55
0.3
1.8 max
(1)
(1)
4.44
0.3
0.25
0.05
(2)
(2)
5.71
5.71
MBD894
Dimensions in mm.
Area ’A’ free of SMD devices.
(1) Dimension before bath soldering, maximum dimension after bath soldering: 0.7 mm.
(2) Pitch tolerance: ± 0.2 mm.
Fig.10 Outline of KM110BH/2430G and KM110BH/2470G.
10
1996 Nov 08
Philips Semiconductors
Preliminary specification
KM110BH/2430;
KM110BH/2470
30° and 70° angle sensor hybrids
DEFINITIONS
Data Sheet Status
Objective specification
Preliminary specification
Product specification
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1996 Nov 08
11
Philips Semiconductors – a worldwide company
Argentina: see South America
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113,
Tel. +61 2 9805 4455, Fax. +61 2 9805 4466
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,
Tel. +43 1 60 101, Fax. +43 1 60 101 1210
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 200 733, Fax. +375 172 200 773
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Belgium: see The Netherlands
Brazil: see South America
Poland: Ul. Lukiska 10, PL 04-123 WARSZAWA,
Tel. +48 22 612 2831, Fax. +48 22 612 2327
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 689 211, Fax. +359 2 689 102
Portugal: see Spain
Romania: see Italy
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 247 9145, Fax. +7 095 247 9144
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Singapore: Lorong 1, Toa Payoh, SINGAPORE 1231,
Tel. +65 350 2538, Fax. +65 251 6500
Colombia: see South America
Czech Republic: see Austria
Slovakia: see Austria
Slovenia: see Italy
Denmark: Prags Boulevard 80, PB 1919, DK-2300 COPENHAGEN S,
Tel. +45 32 88 2636, Fax. +45 31 57 1949
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 7430 Johannesburg 2000,
Tel. +27 11 470 5911, Fax. +27 11 470 5494
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615800, Fax. +358 9 61580/xxx
South America: Rua do Rocio 220, 5th floor, Suite 51,
04552-903 São Paulo, SÃO PAULO - SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 829 1849
France: 4 Rue du Port-aux-Vins, BP317, 92156 SURESNES Cedex,
Tel. +33 1 40 99 6161, Fax. +33 1 40 99 6427
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 3 301 6312, Fax. +34 3 301 4107
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 23 53 60, Fax. +49 40 23 536 300
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 632 2000, Fax. +46 8 632 2745
Greece: No. 15, 25th March Street, GR 17778 TAVROS/ATHENS,
Tel. +30 1 4894 339/239, Fax. +30 1 4814 240
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2686, Fax. +41 1 481 7730
Hungary: see Austria
India: Philips INDIA Ltd, Shivsagar Estate, A Block, Dr. Annie Besant Rd.
Worli, MUMBAI 400 018, Tel. +91 22 4938 541, Fax. +91 22 4938 722
Taiwan: PHILIPS TAIWAN Ltd., 23-30F, 66,
Chung Hsiao West Road, Sec. 1, P.O. Box 22978,
TAIPEI 100, Tel. +886 2 382 4443, Fax. +886 2 382 4444
Indonesia: see Singapore
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260,
Tel. +66 2 745 4090, Fax. +66 2 398 0793
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, TEL AVIV 61180,
Tel. +972 3 645 0444, Fax. +972 3 649 1007
Turkey: Talatpasa Cad. No. 5, 80640 GÜLTEPE/ISTANBUL,
Tel. +90 212 279 2770, Fax. +90 212 282 6707
Italy: PHILIPS SEMICONDUCTORS, Piazza IV Novembre 3,
20124 MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108,
Tel. +81 3 3740 5130, Fax. +81 3 3740 5077
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 181 730 5000, Fax. +44 181 754 8421
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Uruguay: see South America
Vietnam: see Singapore
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Tel. +9-5 800 234 7381
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Tel. +381 11 625 344, Fax.+381 11 635 777
Middle East: see Italy
For all other countries apply to: Philips Semiconductors, Marketing & Sales Communications,
Internet: http://www.semiconductors.philips.com
Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825
© Philips Electronics N.V. 1996
SCA52
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
147021/1200/02/pp12
Date of release: 1996 Nov 08
Document order number: 9397 750 01125
相关型号:
©2020 ICPDF网 联系我们和版权申明