LM2901D/T3 [NXP]
IC QUAD COMPARATOR, 15000 uV OFFSET-MAX, 1300 ns RESPONSE TIME, PDSO14, 3.90 MM, PLASTIC, SOT-108-1, SOP-14, Comparator;
| 型号： | LM2901D/T3 |
| 厂家： | 
NXP |
| 描述： | IC QUAD COMPARATOR, 15000 uV OFFSET-MAX, 1300 ns RESPONSE TIME, PDSO14, 3.90 MM, PLASTIC, SOT-108-1, SOP-14, Comparator 放大器 光电二极管 |
| 文件： | 总12页 (文件大小：130K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
Product data
2002 Sep 17
Supersedes data of 2002 Jul 12
Philips
Semiconductors
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
DESCRIPTION
PIN CONFIGURATION
The LM139 series consists of four independent precision voltage
comparators, with an offset voltage specification as low as 2.0 mV
max for each comparator, which were designed specifically to
operate from a single power supply over a wide range of voltages.
Operation from split power supplies is also possible and the low
power supply current drain is independent of the magnitude of the
power supply voltage. These comparators also have a unique
characteristic in that the input common-mode voltage range includes
ground, even though they are operated from a single power supply
voltage.
D, DH, and N Packages
OUTPUT 3
OUTPUT 2
1
2
3
4
5
6
7
14
13
12
11
10
9
OUTPUT 1
V+
OUTPUT 4
GND
1
4
INPUT 1 –
INPUT 1 +
INPUT 1 –
INPUT 4 +
INPUT 4 –
INPUT 3 +
The LM139 series was designed to directly interface with TTL and
CMOS. When operated from both plus and minus power supplies,
the LM139 series will directly interface with MOS logic where their
low power drain is a distinct advantage over standard comparators.
2
3
8
INPUT 1 +
INPUT 3 –
TOP VIEW
FEATURES
SL00070
• Wide single supply voltage range 2.0 V to 32 V or dual
DC
DC
Figure 1. Pin Configuration
supplies ±1.0 V to ±16 V
DC
DC
• Very low supply current drain (0.8 mA) independent of supply
EQUIVALENT CIRCUIT
voltage (1.0 mW/comparator at 5.0 V
)
DC
+
V
• Low input biasing current 25 nA
• Low input offset current ±5 nA and offset voltage
• Input common-mode voltage range includes ground
• Differential input voltage range equal to the power supply voltage
• Low output 250 mV at 4 mA saturation voltage
3.5 µA
100 µA
3.5 µA
100 µA
Q2
Q3
• Output voltage compatible with TTL, DTL, ECL, MOS and CMOS
+
Q1
Q4
INPUT
logic systems
OUTPUT
– INPUT
Q8
APPLICATIONS
• A/D converters
Q7
Q5
Q6
• Wide range VCO
• MOS clock generator
• High voltage logic gate
• Multivibrators
SL00071
(1 Comparator Only)
Figure 2. Equivalent Circuit
ORDERING INFORMATION
DESCRIPTION
TEMPERATURE RANGE
–55 °C to +125 °C
–25 °C to +85 °C
–25 °C to +85 °C
–25 °C to +85 °C
–40 °C to +125 °C
–40 °C to +125 °C
–40 °C to +125 °C
0 °C to +70 °C
ORDER CODE
LM139N
DWG #
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Thin Shrink Small Outline Package (TSSOP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Thin Shrink Small Outline Package (TSSOP)
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
SOT27-1
SOT108-1
SOT27-1
SOT27-1
SOT108-1
SOT27-1
SOT402-1
SOT108-1
SOT27-1
SOT108-1
SOT402-1
SOT27-1
SOT108-1
SOT27-1
LM239D
LM239N
LM239AN
LM2901D
LM2901N
LM2901DH
LM339AD
LM339AN
LM339D
0 °C to +70 °C
0 °C to +70 °C
0 °C to +70 °C
LM339DH
LM339N
0 °C to +70 °C
–40 °C to +85 °C
–40 °C to +85 °C
MC3302D
MC3302N
2
2002 Sep 17
853-0930 28955
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
RATING
32 or ±16
32
UNIT
V
V
V
P
V
supply voltage
V
DC
V
DC
V
DC
CC
DIFF
IN
CC
Differential input voltage
Input voltage
–0.3 to +32
1
Maximum power dissipation, T
= 25 °C (still–air)
amb
D
N package
D package
DH package
1420
1040
762
mW
mW
mW
2
Output short-circuit to ground
Continuous
50
3
I
IN
Input current (V < –0.3 V )
DC
mA
IN
T
amb
Operating temperature range
LM139
–55 to +125
–25 to +85
0 to +70
°C
°C
°C
°C
°C
LM239/239A
LM339/339A
LM2901
–40 to +125
–40 to +85
MC3302
T
Storage temperature range
–65 to +150
230
°C
°C
stg
T
sld
Lead soldering temperature (10 sec max)
NOTES:
1. Derate above 25 °C, at the following rates:
N Package at 11.4 mW/°C
D Package at 8.3 mW/°C
DH Package at 6.1 mW/°C
2. Short circuits from the output to V+ can cause excessive heating and eventual destruction. The maximum output current is approximately
20 mA independent of the magnitude of V+.
3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector–base junction of
the input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also
lateral NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the comparators to go to the V+
voltage level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal
output states will reestablish when the input voltage, which was negative, again returns to a value greater than –0.3 V
.
DC
3
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
DC AND AC ELECTRICAL CHARACTERISTICS
V+ = 5 V ; LM139: –55 °C ≤ T
≤ +125 °C; LM239/239A: –25 °C ≤ T
≤ +85 °C; LM339/339A: 0 °C ≤ T
≤ +70 °C;
DC
amb
amb
amb
LM2901: –40 °C ≤ T
≤ +125 °C; MC3302: –40 °C ≤ T
≤ +85 °C, unless otherwise specified.
amb
amb
LM239A/339A
SYMBOL
PARAMETER
TEST CONDITIONS
UNIT
Min
Typ
Max
T
= 25 °C
±1.0
±2.0
±4.0
mV
mV
V
amb
2
V
Input offset voltage
OS
Over temp.
= 25 °C
T
0
0
V+ –1.5
V+ –2.0
V+
Input common-mode voltage
amb
V
V
CM
3
range
Over temp.
V
1
Differential input voltage
Keep all V ≥ 0 V (or V– if needed)
V
IDR
IN
DC
I
or I
with output in linear range
IN(+)
IN(–)
4
I
Input bias current
T
= 25 °C
25
250
400
nA
nA
BIAS
amb
Over temp.
I
– I
IN(+)
IN(–)
I
I
Input offset current
Output sink current
Output leakage current
T
= 25 °C
±5.0
16
±50
±150
nA
nA
OS
amb
Over temp.
V
IN(–)
≥ 1 V ; V (+) = 0; V ≤ 1.5 V
;
DC
IN
O
DC
6.0
mA
OL
T
amb
= 25 °C
V
≥ 1 V ; V (–) = 0
DC IN
IN(+)
V
O
= 5 V ; T
= 25 °C
0.1
nA
DC amb
V
= 30 V ; over temp.
1.0
2.0
µA
O
DC
R = ∞ on comparators; V+ = 30 V;
L
I
Supply current
Voltage gain
0.8
mA
CC
T
= 25 °C
amb
A
R ≥ 15 kΩ; V+ = 15 V
L DC
50
200
V/mV
V
V
IN(–)
≥ 1 V ; V
= 0; I
≤ 4 mA
SINK
DC
IN(+)
V
OL
Saturation voltage
T
= 25 °C
250
400
700
mV
mV
amb
Over temp.
V
IN
= TTL logic swing; V
= 1.4 V ; V = 5 V
;
DC
REF
DC
RL
t
t
Large-signal response time
300
1.3
ns
LSR
R = 5.1 kΩ; T
L
= 25 °C
amb
5
Response time
V
RL
= 5 V ; R = 5.1 kΩ; T
= 25 °C
µs
R
DC
L
amb
See notes at the end of the Electrical Characteristics.
4
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
DC AND AC ELECTRICAL CHARACTERISTICS (continued)
V+ = 5 V ; LM139: –55 °C ≤ T
≤ +125 °C; LM239/239A: –25 °C ≤ T
≤ +85 °C; LM339/339A: 0 °C ≤ T
≤ +70 °C;
DC
amb
amb
amb
LM2901: –40 °C ≤ T
≤ +125 °C; MC3302: –40 °C ≤ T
≤ +85 °C, unless otherwise specified.
amb
amb
LM139
Typ
LM239/339
SYMBOL
PARAMETER
TEST CONDITIONS
= 25 °C
UNIT
Min
Max
±5.0
Min
Typ
Max
±5.0
T
amb
±2.0
±2.0
mV
mV
V
2
V
OS
Input offset voltage
Over temp.
= 25 °C
±9.0
±9.0
T
0
0
V+–1.5
V+–2.0
V+
0
0
V+–1.5
V+–2.0
V+
Input common-mode
amb
V
V
CM
3
voltage range
Over temp.
V
1
Differential input voltage
Keep all V ≥ 0 V (or V– if needed)
V
IDR
IN
DC
I
or I
with output in linear range
IN(+)
IN(–)
4
I
I
I
Input bias current
T
= 25 °C
25
±3.0
16
100
300
25
±5.0
16
250
400
nA
nA
BIAS
amb
Over temp.
I
– I
IN(+)
IN(–)
Input offset current
Output sink current
T
amb
= 25 °C
±25
±100
±50
±150
nA
nA
OS
Over temp.
≥ 1 V ; V
IN(+)
V
= 0;
= 0
IN(–)
DC
V
O
≤ 1.5 V ;
DC
6.0
6.0
mA
OL
T
amb
= 25 °C
V
≥ 1 V ; V
DC IN(–)
IN(+)
Output leakage current
Supply current
V
= 5 V ; T
= 25 °C
0.1
0.1
nA
µA
O
DC amb
V
O
= 30 V ; Over temp.
1.0
2.0
1.0
2.0
DC
R = ∞ on comparators; V+ = 30 V;
L
I
0.8
0.8
mA
CC
T
amb
= 25 °C
A
V
Voltage gain
R ≥ 15 kΩ; V+ = 15 V
L DC
50
200
50
200
V/mV
V
OL
Saturation voltage
V
IN(–)
≥ 1 V ; V
= 0; I
≤ 4 mA
DC IN(+)
SINK
T
= 25 °C
250
400
700
250
400
700
mV
mV
amb
Over temp.
V
IN
= TTL logic swing; V
= 1.4 V
;
REF
DC
t
t
Large-signal response time
V
V
= 5 V ; R = 5.1 kΩ;
300
1.3
300
1.3
ns
LSR
RL
DC
L
T
amb
= 25 °C
= 5 V ; R = 5.1 kΩ;
RL
DC
L
5
Response time
µs
R
T
amb
= 25 °C
See notes on following page.
5
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
DC AND AC ELECTRICAL CHARACTERISTICS (continued)
V+ = 5 V ; LM139: –55 °C ≤ T
≤ +125 °C; LM239/239A: –25 °C ≤ T
≤ +85 °C; LM339/339A: 0 °C ≤ T
≤ +70 °C;
DC
amb
amb
amb
LM2901: –40 °C ≤ T
≤ +125 °C; MC3302: –40 °C ≤ T
≤ +85 °C, unless otherwise specified.
amb
amb
LM2901
Typ
MC3302
SYMBOL
PARAMETER
TEST CONDITIONS
= 25 °C
UNIT
Min
Max
±7.0
Min
Typ
Max
±20
T
amb
±2.0
±9
±3.0
mV
mV
V
2
V
OS
Input offset voltage
Over temp.
= 25 °C
±15
±40
T
0
0
V+–1.5
V+–2.0
V+
0
0
V+–1.5
V+–2.0
V+
Input common-mode
amb
V
V
CM
3
voltage range
Over temp.
V
1
Differential input voltage
Keep all V ≥ 0 V (or V– if needed)
V
IDR
IN
DC
I
or I
with output in linear range
IN(+)
IN(–)
4
I
Input bias current
T
= 25 °C
25
200
250
500
25
500
1000
nA
nA
BIAS
amb
Over temp.
I
– I
IN(+)
IN(–)
I
I
Input offset current
Output sink current
T
= 25 °C
±5
±50
±50
±200
±5
±100
±300
nA
nA
OS
amb
Over temp.
≥ 1 V ; V = 0;
IN(+)
V
IN(–)
DC
6.0
16
6
16
mA
OL
V
O
≤ 1.5 V ; T
= 25 °C
DC amb
V
IN(+)
≥ 1 V ; V
= 0
DC
IN(–)
V
= 5 V ; T
= 25 °C
0.1
0.1
0.8
nA
µA
mA
Output leakage current
Supply current
O
DC amb
V
= 30 V ; Over temp.
1.0
1.0
1.8
O
DC
R = ∞ on all comparators,
L
T
amb
= 25 °C
0.8
1.0
100
2.0
2.5
I
CC
R = ∞ on all comparators,
L
mA
V+ = 30 V
A
V
Voltage gain
R ≥ 15 kΩ; V+ = 15 V
25
2
100
150
V/mV
L
DC
V
≥ 1 V ; V
= 0; I
≤ 4mA
SINK
IN(–)
DC
IN(+)
V
OL
Saturation voltage
T
amb
= 25 °C
400
700
400
700
mV
mV
Over temp.
400
300
V
= TTL logic swing;
IN
t
t
Large-signal response time
V
= 1.4 V ; V = 5 V ;
DC
300
1.3
ns
LSR
REF
R = 5.1 kΩ; T
DC
RL
= 25 °C
L
amb
V
RL
= 5 V ; R = 5.1 kΩ;
DC L
5
Response time
1.3
µs
R
T
amb
= 25 °C
NOTES:
1. Positive excursions of input voltage may exceed the power supply level by 17 V. As long as the other voltage remains within the
common-mode range, the comparator will provide a proper output state. The low input voltage state must not be less than –0.3 V (or
DC
0.3 V below the magnitude of the negative power supply, if used).
DC
2. At output switch point, V ≈ 1.4 V , R = 0 Ω with V+ from 5 V to 30 V ; and over the full input common-mode range (0 V to
O
DC
S
DC
DC
DC
V+ – 1.5 V ). Inputs of unused comparators should be grounded.
DC
3. The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of
the common-mode voltage range is V+ – 1.5 V, but either or both inputs can go to 30 V without damage.
DC
4. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of
the output so no loading change exists on the reference or input lines.
5. The response time specified is for a 100 mV input step with a 5 mV overdrive. For larger overdrive signals, 300 ns can be obtained (see
Figure 4, Typical performance characteristics).
6
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
EQUIVALENT CIRCUIT
+
V
+
V
700kΩ
100kΩ
30kΩ
500pF
–
+ VC
3.0kΩ
5.1kΩ
FREQUENCY
CONTROL
1/4LM339
+
–
10
0.01µF
OUTPUT 1
OUTPUT 2
1/4LM339
+
VOLTAGE
0.1µF
–
INPUT
V
/2
20kΩ
50kΩ
20kΩ
+
+
V
/2
1/4LM339
–
NOTES:
V+ = 30V
DC
DC
Two-Decade High Frequency VCO
+
V (12V )
DC
+ 250m V
< V = 50V
DC
C
700H < f = 100kHz
O
2R
R
S
10KΩ
+
V
HI
REF
+
–
LAMP
S
+
V
IN
+
2N2222
+
2R
5V
S
DC
360
–
+
V
LO
REF
Limit Comparator
+
–
+
V
REF 4
100
5V
DC
100k
+
5V
DC
o
360
1/4LM339
V
O
–12V
+
–
+
V
+
–
REF
10KΩ
+
(1.4VDC
)
V
REF 3
100
–12V
DC
100k
100k
+
V
5V
O
DC
TTL–to–MOS Logic Converter
360
+
–
+
V
REF 2
+
V
100
+
5V
DC
360
2.0kΩ
200kΩ
100kΩ
+
o
V
+
–
+
–
+
V
0.1µF
REF 1
100
V
O
100k
CRYSTAL
1 – 100kHz
200kΩ
Visible Voltage Indicator
Crystal–Controlled Oscillator
NOTE:
Input of unused comparators should be grounded.
SL00072
Figure 3. Equivalent circuit.
7
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
TYPICAL PERFORMANCE CHARACTERISTICS
Supply Current
Input Current
Output Saturation Voltage
1.0
80
o
10
T
-55 C
A
OUT OF
SATURATION
V
= 0 V
IN (CM)
IN (CM)
DC
= 10kΩ
R
o
= 0 C
T
0.8
0.6
0.4
A
1.0
60
o
= –55 C
T
A
o
= +25 C
T
+
A
o
o
= 0 C
T
=
125 C
T
A
A
0.1
40
20
o
o
T
= +70 C
T
= –55 C
A
A
o
T
= 125 C
0.01
A
o
= +125 C
o
T
T
= +25 C
A
A
0.2
o
o
T
– +25
T
= +70 C
A
A
R
=
L
0.001
0.01
0.1
1.0
10
100
0
10
20
30
40
0
10
20
30
40
v + — SUPPLY VOLTAGE — V
DC
I
— OUTPUT SINK CURRENT (mA)
O
V+ — SUPPLY VOLTAGE — V
DC
Response Time for Various
Input Overdrives —
Response Time for Various
Input Overdrives —
Negative Transition
Positive Transition
6
5
6
5
INPUT OVERDRIVE = 100mV
5mV = INPUT OVERDRIVE
+
5V
4
3
4
3
20mV
5mV
5.1K
–
V
2
1
0
IN
+
2
1
0
20mV
+
V
5V
100mV
OUT
5.1K
0
0
–
+
V
IN
o
= 25 C
OVERDRIVE
–50
–100
–50
–100
T
V
A
OUT
2.0
o
T
= 25 C
A
OVERDRIVE
1.0 1.5
TIME — µ sec
0
0.5
0
0.5
1.0
1.5
2.0
TIME — µ sec
SL00073
Figure 4. Typical performance characteristics.
8
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
9
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
DIP14: plastic dual in-line package; 14 leads (300 mil)
SOT27-1
10
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm
SOT402-1
11
2002 Sep 17
Philips Semiconductors
Product data
LM139/239/239A/339/339A/
LM2901/MC3302
Quad voltage comparator
Data sheet status
Product
status
Definitions
[1]
Data sheet status
[2]
Objective data
Development
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
Preliminary data
Product data
Qualification
Production
This data sheet contains data from the preliminary specification. Supplementary data will be
published at a later date. Philips Semiconductors reserves the right to change the specification
without notice, in order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply.
Changes will be communicated according to the Customer Product/Process Change Notification
(CPCN) procedure SNW-SQ-650A.
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Koninklijke Philips Electronics N.V. 2002
Contact information
All rights reserved. Printed in U.S.A.
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
Date of release: 09-02
9397 750 10406
For sales offices addresses send e-mail to:
sales.addresses@www.semiconductors.philips.com.
Document order number:
Philips
Semiconductors
相关型号：
LM2901DBRE4
IC QUAD COMPARATOR, 15000 uV OFFSET-MAX, 1300 ns RESPONSE TIME, PDSO14, PLASTIC, SSOP-14, Comparator
TI
LM2901DG
Comparator, Quad, Single Supply, 36 V TA= -40° to +105°C, SOIC-14 NB, 55-TUBE
ONSEMI
LM2901DH
IC QUAD COMPARATOR, 15000 uV OFFSET-MAX, 1300 ns RESPONSE TIME, PDSO14, 4.40 MM, PLASTIC, SOT-402-1, TSSOP-14, Comparator
NXP
LM2901DH/T3
IC QUAD COMPARATOR, 15000 uV OFFSET-MAX, 1300 ns RESPONSE TIME, PDSO14, 4.40 MM, PLASTIC, SOT-402-1, TSSOP-14, Comparator
NXP
©2020 ICPDF网 联系我们和版权申明