LPC1111FHN33/101 [NXP]
Cortex-M0 based microcontrollers with industry-leading power and efficiency; 的Cortex -M0微控制器具有业界领先的功率和效率
| 型号： | LPC1111FHN33/101 |
| 厂家： | 
NXP |
| 描述： | Cortex-M0 based microcontrollers with industry-leading power and efficiency |
| 文件： | 总2页 (文件大小：619K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NXP 50-MHz, 32-bit
Cortex-M0™ microcontrollers
LPC1100
Cortex-M0 based microcontrollers with
industry-leading power and efficiency
Built around the new Cortex-M0 architecture, the smallest, lowest power, and most energy-efficient
ARM core ever developed, these MCUs are ideally equipped for use in many traditional 8/16-bit
applications.
Key features
} Analogperipheral
} ARM Cortex-M0 processor
- 10-bit Analog-to-Digital Converter with eight channels and
conversion rates up to 400 K samples per second
} Other:
- 50 MHz operation
- Nested Vectored Interrupt Controller for fast deterministic
interrupts
- Up to 42 general-purpose I/O (GPIO) pins with configurable
pull-up/down resistors and a new, configurable open-drain
operating mode
- Wakeup Interrupt Controller allows automatic wake from a
priority interrupt
- Three reduced-power modes: Sleep, Deep-sleep, and Deep
power-down
- Four general-purpose counter/timers, with a total of four
capture inputs and 13 match outputs
} Memories
- Programmable Watchdog Timer (WDT) with lock-out feature
- System tick timer
- Up to 128 KB Flash memory
- Up to 16 KB SRAM
- Each peripheral has its own clock divider for power savings
} Serial peripherals
- UART with fractional baud rate generation, internal FIFO,
and RS-485 support
Applications
} White goods
- Up to 2 SPI controllers with FIFO and multi-protocol
} e-Metering
capabilities
} Consumer peripherals
} Remote sensors
} 8/16-bit applications
} Industrial networking
} System supervisors
- I2C-bus interface supporting full I2C-bus specification and
Fast mode plus with a data rate of 1 Mbit/s with multiple
address recognition and monitor mode
Development tools
NXP’s LPC1100 is the lowest-priced 32-bit MCU solution
in the market. It offers greater value than existing 8/16-bit
microcontroller by delivering unprecedented performance,
simplicity, low power, and dramatic reductions in code size for
every application.
The LPC1100 family is supported by the LPCXpresso , an easy
to use, comprehensive development tool platform for under
US$30, as well as development tools from IAR, Keil, Hitex,
Code Red, and many others. For the most current listing,
please visit www.nxp.com/microcontrollers.
With over 45 DMIPS of performance compared to the
sub-DMIP performance typical of 8-bit MCUs and 3 to 5 DMIPS
for 16-bit MCUs, the LPC1100 not only execute basic control
tasks but sophisticated algorithms as well, making even the
most complex tasks within reach. Using less time to do more
tasks translates directly into lower energy consumption.
This level of performance is delivered at 50 MHz, with extensive
power optimization, at less than 10 mA.
Additional features
} Serial Wire Debug (4 breakpoints)
} High-current output driver (20 mA) on one pin
} High-current sink drivers (20 mA) on two pins
} Integrated PMU (Power Management Unit) to minimize
power consumption during Sleep, Deep-sleep, and Deep
power-down modes
} Single 3.3 V power supply (1.8 to 3.6 V)
} Over 5 kV ESD for rugged applications
} 13 GPIO pins can be used as edge and level sensitive
interrupt sources
Challenging the belief that 8/16-bit microcontrollers use less
code, industry-standard Coremark benchmarks show that
the LPC1100 requires 40-50% less code for most common
microcontroller tasks.
} Clock generation unit with divider that can reflect the main
oscillator clock, IRC clock, CPU clock, and Watchdog clock.
} Processor wake-up from Deep-sleep mode via interrupts
from various peripherals
LPC1100 block diagram
Power Management Unit
} Brownout detect with four separate thresholds for interrupt
and forced reset
Power modes, BOD, Single power supply, POR
} Power-On Reset (POR)
ADC
I2C
8 Channel, 10 bit
1 Interface
}
Crystal oscillator with an operating range of 1 MHz to 25 MHz
} 12 MHz internal RC oscillator trimmed to 1% accuracy that
can also be used as a system clock
CortexTM -M0
50 MHz
GPIO
SPI
Up to 42 GPIOs
1-2 Interfaces
} PLL allows CPU operation up to the maximum CPU rate
without the need for a high-frequency crystal. Can be run
run from the main oscillator, the internal RC oscillator, or
the Watchdog oscillator.
Timers
2 x16-bit & 2x32-bit
System tick timer,
WDT
UART
RAM
Flash
8KB – 32KB
1 Interface
2KB – 8KB
} Available in 48-pin LQFP, 33-pin HVQFN, or 44-pin PLCC
package
Clock Generation Unit
12 MHz 1% IRC OSC, Watchdog OSC, 1-25 MHz System OSC, System PLL
LPC111x ordering options
Type number
Flash
Total SRAM
UART RS-485
I2C / Fast+
SPI
ADC Channels
Package
LPC1111
LPC1111FHN33/101
LPC1111FHN33/201
LPC1112
8 KB
8 KB
2 KB
4 KB
1
1
1
1
1
1
8
8
HVQFN33
HVQFN33
LPC1112FHN33/101
LPC1112FHN33/201
LPC1113
16 KB
16 KB
2 KB
4 KB
1
1
1
1
1
1
8
8
HVQFN33
HVQFN33
LPC1113FHN33/201
LPC1113FHN33/301
LPC1113FBD48/301
LPC1114
24 KB
24 KB
24 KB
4 KB
8 KB
8 KB
1
1
1
1
1
1
1
1
2
8
8
8
HVQFN33
HVQFN33
LQFP48
LPC1114FHN33/201
LPC1114FHN33/301
LPC1114FBD48/301
LPC1114FA44/301
32 KB
32 KB
32 KB
32 KB
4 KB
8 KB
8 KB
8 KB
1
1
1
1
1
1
1
1
1
1
2
2
8
8
8
8
HVQFN33
HVQFN33
LQFP48
PLCC44
© 2010 NXP B.V.
www.nxp.com
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and
reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Date of release: January 2010
Document order number: 9397 750 16865
Printed in the Netherlands
相关型号：
LPC1111FHN33/102
IC 32-BIT, FLASH, 50 MHz, RISC MICROCONTROLLER, PQCC33, 7 X 7 MM, 0.85 MM HEIGHT, PLASTIC, HVQFN-33, Microcontroller
NXP
LPC1111FHN33/103
32-BIT, FLASH, 50MHz, RISC MICROCONTROLLER, PQCC33, 7 X 7 MM, 0.85 MM HEIGHT, PLASTIC, HVQFN-33
NXP
LPC1112FDH28/102
IC 32-BIT, FLASH, 50 MHz, RISC MICROCONTROLLER, PDSO28, 4.40 MM HEIGHT, PLASTIC, SOT361-1, MO-153, TSSOP-28, Microcontroller
NXP
©2020 ICPDF网 联系我们和版权申明