N74F30244N [NXP]
Octal 30ohm line driver with enable, non-inverting open collector; 与八进制30ohm线驱动器使能,非反相集电极开路型号: | N74F30244N |
厂家: | NXP |
描述: | Octal 30ohm line driver with enable, non-inverting open collector |
文件: | 总10页 (文件大小:85K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
74F30240
Octal 30Ω line driver with enable,
inverting (open collector)*
74F30244
Octal 30Ω line driver with enable,
non-inverting (open collector)
* Discontinued part. Please see the Discontinued Product List.
Product specification
IC15 Data Handbook
1999 Jan 08
Philips
Semiconductors
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
74F30240
74F30244
Octal 30Ω line driver with enable, inverting (open collector)
Octal 30Ω line driver with enable, non-inverting (open collecor)
FEATURES
DESCRIPTION
The 74F30240 and 74F30244 are high current open collector octal
buffers composed of eight inverters. The 74F30240 has inverting
data paths and the 74F30244 has non-inverting paths. Each device
has eight inverters with two Output Enables (OE0, OE1), each
controlling four outputs. Both drivers are designed to deal with the
low-impedance transmission line effects found on printed circuit
• Ideal for driving transmission lines or backplanes. 160mA I ideal
OL
for applications with impedance as low as 30Ω
• Guaranteed threshold voltages on the incident wave while driving
line as low as 30Ω
• High impedance NPN base inputs for reduced loading (20µA in
boards when fast edge rates are used. The 160mA I provides
ample power to achieve TTL switching voltages on the incident
wave.
OL
High and Low states)
• Ideal for applications which require high output drive and minimal
bus loading
TYPICAL
PROPAGATION
DELAY
TYPICAL
SUPPLY CURRENT
(TOTAL)
• Octal interface
TYPE
• 74F30240 inverting
74F30240
74F30244
9.5ns
62.5mA
69mA
• 74F30244 non-inverting
• Open-Collector outputs sink 160mA
10.5ns
• Multiple side pins are used for V and GND to reduce lead
CC
inductance (improves speed and noise immunity)
• Available in 24-pin standard slim DIP (300mil) plastic, SOL or
CERDIP packages
ORDERING INFORMATION
DESCRIPTION
COMMERCIAL RANGE
PACKAGE
DRAWING NUMBER
V
CC
= 5V ±10%,
= 0°C to +70°C
T
amb
24-pin Plastic Slim DIP (300mil)
N74F30244N
N74F30244D
SOT222-1
SOT137-1
1
24–pin Plastic SOL
NOTE:
1. Because of the high current sinking capability of these parts, the SOL package should only be used under the following conditions:
a. 50% duty cycle,
AND
b. 3/5 of remaining 50% driving ≤ 100mA (leaving the remaining 2/5 of the drive ≤ 160mA)
OR
c. use ≤ 450 linear feet per minute forced air or other thermal mounting techniques.
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
74F(U.L.)
HIGH/LOW
LOAD VALUE
HIGH/LOW
PINS
DESCRIPTION
D0–D7
Data inputs
1.0/0.033
1.0/0.033
OC/266.7
OC/266.7
20µA/20µA
20µA/20µA
OC/160mA
OC/160mA
OE0–OE1
Q0–Q7
Output Enable inputs (Active Low)
Data outputs (OC) for 74F30240
Data outputs (OC) for 74F30244
Q0–Q7
NOTE: One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state. OC = Open Collector.
* Discontinued part. Please see the Discontinued Products List.
2
1999 Jan 08
853–1157 20619
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
PIN CONFIGURATION – 74F30240
PIN CONFIGURATION – 74F30244
Q0
Q1
1
2
3
4
5
6
7
8
9
24 D0
23 D1
22 D2
21 D3
20 OE0
Q0
Q1
1
2
3
4
5
6
7
8
9
24 D0
23 D1
22 D2
21 D3
20 OE0
Q2
Q2
Q3
Q3
GND
GND
GND
GND
Q4
GND
GND
GND
GND
Q4
19
18
V
V
CC
CC
19
18
V
V
CC
CC
17 OE1
16 D4
15 D5
14 D6
13 D7
17 OE1
16 D4
15 D5
14 D6
13 D7
Q5 10
Q6 11
Q7 12
Q5 10
Q6 11
Q7 12
SF01387
SF01388
LOGIC SYMBOL – 74F30240
LOGIC SYMBOL – 74F30244
24 23 22 21 16 15 14 13
24 23 22 21 16 15 14 13
D0 D1 D2 D3 D4 D5 D6 D7
D0 D1 D2 D3 D4 D5 D6 D7
20
17
OE0
OE1
20
17
OE0
OE1
Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
1
2
3
4
9
10 11 12
SF01389
1
2
3
4
9
10 11 12
SF01390
V
= PIN 18, 19
V
= PIN 18, 19
CC
CC
GND = PIN 5, 6, 7, 8
GND = PIN 5, 6, 7, 8
IEC/IEEE SYMBOL – 74F30240
IEC/IEEE SYMBOL – 74F30244
20
20
EN1
EN1
17
17
EN2
EN2
24
1
2
24
1
2
1
1
23
22
21
16
15
14
13
23
22
21
16
15
14
13
3
3
4
4
9
9
10
11
12
10
11
12
SF01391
SF01392
* Discontinued part. Please see the Discontinued Products List.
1999 Jan 08
3
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
LOGIC DIAGRAM – 74F30240
LOGIC DIAGRAM – 74F30244
24
1
2
3
4
24
23
22
21
1
2
3
4
D0
Q0
Q1
Q2
Q3
D0
D1
D2
D3
Q0
Q1
Q2
Q3
23
D1
22
D2
21
D3
20
20
16
OE0
OE0
D4
16
9
10
11
12
9
10
11
12
D4
Q4
Q5
Q6
Q7
Q4
Q5
Q6
Q7
15
15
14
13
17
D5
D5
D6
14
D6
13
D7
D7
17
OE1
OE1
V
= PIN 18, 19
V
= PIN 18, 19
CC
CC
GND = PIN 5, 6, 7, 8
GND = PIN 5, 6, 7, 8
SF01393
SF01394
FUNCTION TABLE
OUTPUTS
INPUTS
74F30240
74F30244
OEn
L
Dn
L
Qn
H
Qn
L
L
H
L
H
H
X
OFF
OFF
H
L
X
OFF
=
=
=
=
High voltage level
Low voltage level
Don’t care
Pulled up through resistor (Open Collector)
* Discontinued part. Please see the Discontinued Products List.
1999 Jan 08
4
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limits set forth in this table may impair the useful life of the device.
Unless otherwise noted these limits are over the operating free-air temperature range.)
SYMBOL
PARAMETER
RATING
–0.5 to +7.0
–0.5 to +7.0
–30 to +5
UNIT
V
V
Supply voltage
Input voltage
Input current
CC
IN
V
V
I
mA
V
IN
V
Voltage applied to output in High output state
Current applied to output in Low output state
Operating free-air temperature range
Storage temperature range
–0.5 to V
320
OUT
OUT
CC
I
mA
°C
°C
T
amb
0 to +70
T
stg
–65 to +150
RECOMMENDED OPERATING CONDITIONS
LIMITS
SYMBOL
PARAMETER
UNIT
MIN
4.5
NOM
MAX
V
Supply voltage
5.0
5.5
V
V
CC
IH
IL
V
V
High-level input voltage
Low-level input voltage
Input clamp current
2.0
0.8
–18
4.5
V
I
mA
V
IK
V
OH
High-level output voltage
Low-level output current
I
160
+70
mA
°C
OL
T
amb
Operating free-air temperature range
0
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
LIMITS
1
SYMBOL
PARAMETER
TEST CONDITIONS
UNIT
2
MIN
TYP
MAX
V
V
= MIN, V = MAX,
CC
IH
IL
I
High-level output current
250
µA
OH
= MIN, V = MAX
OH
I
OL
= 100mA ±10% V
0.42
0.55
V
CC
V
V
V
= MIN,
= MAX,
= MIN
CC
IL
I =
OL
V
V
Low-level output current
Input clamp voltage
OL
160mA
±5% V
0.80
V
CC
IH
NO TAG
V
= MIN, I = I
IK
–0.73
–1.2
100
V
IK
CC
I
Input current at maximum
input voltage
I
I
V
= 0.0V, V = 7.0V
µA
CC
I
I
I
High-level input current
Low-level input current
V
V
= MAX, V = 2.7V
20
–20
23
µA
µA
IH
CC
I
= MAX, V = 0.5V
IL
CC
I
I
I
I
I
13
70
19
70
mA
mA
mA
mA
CCH
CCL
CCH
CCL
74F30240
V
= MAX
= MAX
CC
95
Supply current
(total)
I
CC
27
74F30244
V
CC
100
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at V = 5V, T = 25°C.
CC
amb
3. I
is the current necessary to guarantee the High-to-Low transition in a 30Ω transmission line on the incident wave.
OL1
* Discontinued part. Please see the Discontinued Products List.
1999 Jan 08
5
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
AC ELECTRICAL CHARACTERISTICS
LIMITS
T
V
= +25°C
= +5.0V
T
V
= 0°C to +70°C
= +5.0V ± 10%
amb
CC
amb
CC
TEST
CONDITION
SYMBOL
PARAMETER
UNIT
C = 50pF, R = 500Ω
C = 50pF, R = 500Ω
L
L
L
L
MIN
TYP
MAX
MIN
MAX
t
t
Propagation delay
Dn to Qn
4.0
1.0
10.0
2.0
14.5
5.0
4.0
1.0
15.0
5.5
PLH
PHL
Waveform 2
Waveform 1, 2
Waveform 1
ns
ns
ns
ns
74f30240
74f30244
t
t
Propagation delay
OEn to Qn
4.0
3.5
10.0
6.0
14.0
9.0
4.0
3.5
14.5
10.5
PLH
PHL
t
t
Propagation delay
Dn to Qn
4.0
3.0
10.5
5.5
14.5
9.0
4.0
3.0
15.0
9.5
PLH
PHL
t
t
Propagation delay
OEn to Qn
4.0
3.5
9.5
6.0
14.0
9.0
4.0
3.5
14.5
10.5
PLH
PHL
Waveform 1, 2
AC WAVEFORMS
For all waveforms, V = 1.5V.
M
Dn, OEn
Dn, OEn
V
V
M
V
V
M
M
t
M
t
t
PLH
t
PHL
PLH
PHL
Qn
Qn
V
V
M
V
V
M
M
M
SF01385
SF01384
Waveform 1. Propagation Delay for Data to Output
Waveform 2. Propagation Delay for Data to Output
TYPICAL PROPAGATION DELAYS VERSUS LOAD FOR OPEN COLLECTOR OUTPUTS
9
t
PLH
8
7
6
5
4
3
2
1
0
t
PHL
0
100
200
300
400
500
600
LOAD RESISTOR (Ω)
NOTE:
When using Open-Collector parts, the value of the pull-up resistor greatly affects the value of the t
. For example, changing the
PLH
specified pull-up resistor value from 500Ω to 100Ω will improve the t
up to 50% with only a slight increase in the t
. However,
PLH
PHL
if the value of the pull-up resistor is changed, the user must make certain that the total I current through the resistor and the total
OL
I s of the receivers does not exceed the I maximum specification.
IL
OL
SF01386
* Discontinued part. Please see the Discontinued Products List.
1999 Jan 08
6
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
TEST CIRCUIT AND WAVEFORMS
7.0V
R
V
CC
t
AMP (V)
0V
w
90%
90%
NEGATIVE
PULSE
V
V
M
M
L
V
V
OUT
IN
10%
10%
PULSE
GENERATOR
D.U.T.
t
t )
t
t )
THL ( f
TLH ( r
R
C
R
L
T
L
t
t )
t
t )
TLH ( r
THL ( f
AMP (V)
0V
90%
M
90%
POSITIVE
PULSE
V
V
M
Test Circuit for Open Collector Outputs
DEFINITIONS:
10%
10%
t
w
R
L
C
L
R
T
=
=
=
Load resistor;
see AC electrical characteristics for value.
Load capacitance includes jig and probe capacitance;
see AC electrical characteristics for value.
Termination resistance should be equal to Z
pulse generators.
Input Pulse Definition
of
INPUT PULSE REQUIREMENTS
OUT
family
V
M
rep. rate
t
w
t
t
THL
amplitude
TLH
2.5ns
2.5ns
74F
3.0V
1.5V
1MHz
500ns
SF00027
* Discontinued part. Please see the Discontinued Products List.
1999 Jan 08
7
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
DIP24: plastic dual in-line package; 24 leads (300 mil)
SOT222-1
* Discontinued part. Please see the Discontinued Product List.
8
1999 Jan 08
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
SO24: plastic small outline package; 24 leads; body width 7.5 mm
SOT137-1
* Discontinued part. Please see the Discontinued Product List.
9
1999 Jan 08
Philips Semiconductors
Product specification
30Ω line drivers
74F30240*, 74F30244
Data sheet status
[1]
Data sheet
status
Product
status
Definition
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Sunnyvale, California 94088–3409
Telephone 800-234-7381
Date of release: 03-98
Document order number:
9397-750-05213
* Discontinued part. Please see the Discontinued Product List.
Philips
Semiconductors
相关型号:
©2020 ICPDF网 联系我们和版权申明