P5CD072EV0/TVSRRFFO [NXP]
IC MROM, 30 MHz, MICROCONTROLLER, SOT-658BA3, MODULE, Microcontroller;
| 型号： | P5CD072EV0/TVSRRFFO |
| 厂家： | 
NXP |
| 描述： | IC MROM, 30 MHz, MICROCONTROLLER, SOT-658BA3, MODULE, Microcontroller 时钟 微控制器 外围集成电路 |
| 文件： | 总11页 (文件大小：196K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P5CD072
Secure Dual Interface PKI Smart Card Controller
Rev. 1.2 — 4 October 2004
Short Form Specification
1. General description
1.1 Family description
Philips Semiconductors SmartMX (Memory eXtension) multiple interface option platform
features a significantly enhanced smart card IC architecture. New powerful opcodes are
available beyond the compatible classic 80C51 instruction set. The SmartMX family
manufactured in most advanced CMOS 0.18 µm 5 metal layer technology is positioned to
service high volume, mono- and multi-application markets such as eGovernment (e.g.
Smart Passport), banking/finance, mobile communications, public transportation, pay TV,
conditional access and network access.
SmartMX enables the easy implementation of state-of-the-art operating systems and
open platform solutions including Java Card Global Platform and MULTOS by offering
optimized features like linear addressing and an enhanced instruction set together with
the highest levels of security. Within its targeted segments, the new platform is the most
advanced solution available, combining exceptionally powerful co-processors for public
and secret key encryption supporting RSA, ECC, DES and AES, with the high security,
ultra low power, performance optimized design concept of Philips Semiconductors’
handshaking technology. For further details on general SmartMX platform features please
refer to the “SmartMX platform features” short form specification.
1.2 Description P5CD072 device
◆ 72 Kbytes EEPROM
◆ 160 Kbytes User ROM
◆ 4608 bytes RAM
◆ PKI (Public Key Infrastructure) co-processor (RSA, ECC)
◆ Dual / Triple key DES-3 co-processor
◆ ISO/IEC 7816 contact interface
◆ ISO/IEC 14443A contactless interface
◆ EEPROM data retention time: 20 years minimum
The P5CD072 is a Secure Dual Interface PKI Smart Card Controller of the SmartMX
platform featuring 160 Kbytes of ROM, 4608 bytes of RAM and 72 Kbytes of EEPROM,
which can be used as data memory and as program memory. The non-volatile memory
consists of high reliability memory cells to guarantee data integrity, which is especially
important when the EEPROM is used as program memory.
Philips Semiconductors
P5CD072
Secure Dual Interface PKI Smart Card Controller
Operated both in contact mode (ISO/IEC 7816) and in contactless mode (ISO/IEC 14443)
the user defines the final function of the chip with his chip operating system (COS). This
allows the same level of security, functionality and flexibility for the contact interface as
well as for the contactless interface.
The field proven RF interface technology (according ISO/IEC 14443-2) is well established
in all products of the MIFARE® interface platform and provides reliable communication
and secure processing, even in electro-magnetically harsh environments like in buses or
train stations. Compatibility with existing MIFARE® reader infrastructure and the optional
free of charge emulation modes of MIFARE® 1K and MIFARE® 4K enable fast system
integration and backward compatibility of standard MIFARE® and ProX family based
cards.
Bi-directional communication with the contact interface of the device can be performed
through three serial IOs. These IOs are under full control of the application software in
order to allow conditional controlled access to the different internal memories.
The On-chip hardware is software controlled via Special Function Registers (SFRs). Their
function and usage is described in the respective sections of this specification as the
SFRs are correlated to the activities of the CPU, Interrupt, IO, EEPROM, Timers, etc.
The P5CD072 provides two power saving modes with reduced activity: the IDLE and the
SLEEP or CLOCKSTOP Mode. These two modes are activated by software.
The device operates either with a single 1.8V, 3 V or 5 V (voltage classes C, B, A) power
supply at a maximum external clock frequency of 10 MHz supplied by the contact pads
(internally up to 30 MHz) or with a power supply generated from the RF-field emitted by an
RF-reader.
1.2.1 Different Configurations of the P5CD072
Depending on the application requirements the P5CD072 can be configured according to
options described in the data sheet chapter “ORDER ENTRY FORM”.
There are three different configurations (A, B1 and B4) possible as shown in Table [1]. The
MIFARE® option configuration has impact on the access conditions for the EEPROM and
influences the User OS development.
Note that the contactless interface can be used in any of the following configurations to
communicate via any protocol (T=CL as specified in ISO/IEC 14443-4 or a self defined
protocol), also concurrently to the MIFARE® protocol available in configuration B1 and B4.
1.2.1.1 Configuration A
In configuration A all memory resources are available and under full control of the dual
interface User OS. No MIFARE® functionality is available.
1.2.1.2 Configuration B1
In configuration B1 the contactless MIFARE® Classic OS provided by Philips is
implemented on the P5CD072. 1 Kbyte of the EEPROM can be accessed by the
MIFARE® Classic OS offering the same command set and functionality as a MIFARE® 1K
hardwired logic chip. The access conditions for the user OS to the MIFARE® memory area
can be configured via the so called ACM (Access condition matrix). The MIFARE® Classic
OS offers a backward compatibility to support existing infrastructure based on the
MIFARE® Classic functionality.
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.2 — 4 October 2004
2 of 11
Philips Semiconductors
P5CD072
Secure Dual Interface PKI Smart Card Controller
1.2.1.3 Configuration B4
In configuration B4 the MIFARE® Classic OS provided by Philips Semiconductors offers
the same functionality and command set as the MIFARE® 4K hardwired chip. This
emulation offers the possibility to access 4 Kbytes of EEPROM memory using the
MIFARE® command set. Access rights for the user OS and the MIFARE® 4K emulation on
accessing the EEPROM memory can be configured via the so called ACM (Access
Condition Matrix).
For secure separation of the user OS and the MIFARE® OS a dedicated built in hardware
protection controls the access to the EEPROM, RAM and ROM.
For detailed explanation of MIFARE® 1K and MIFARE® 4K functionality please refer also
to the following documents:
• MIFARE® MF CM500 Product Specification
• MIFARE® Standard IC MF1 ICS50 Functional Specification
• MIFARE® Standard 4 Kbytes Card IC MF1 ICS70
Table 1:
Configurations of the P5CD072
Configuration
EEPROM
A
72 Kbytes for access with user OS
B1
71 Kbytes for access with user OS via EEPROM SFR
1 Kbyte for access with MIFARE® Classic OS and user OS
68 Kbytes for access with user OS via EEPROM SFR
[1]
B4
[1]
4 Kbytes for access with MMIFARE® Classic OS and user OS
[1] In configuration B1 and B4 the MIFARE® OS allocates 128 bytes of the RAM.
CONFIGURATION A
CONFIGURATION B
CONFIGURATION B4
RAM
RAM
RAM
4480 bytes
4480 bytes
4608 bytes
128 bytes MIFARE® OS
128 bytes MIFARE® OS
EEPROM
71 Kbytes
EEPROM
68 Kbytes
EEPROM
72 Kbytes
1 Kbytes
4 Kbytes
MIFARE® OS
MIFARE® OS
ROM
ROM
ROM
160 Kbytes
160 Kbytes
160 Kbytes
Fig 1. Configurations of the P5CD072.
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.2 — 4 October 2004
3 of 11
Philips Semiconductors
P5CD072
Secure Dual Interface PKI Smart Card Controller
2. Features
2.1 Product Specific Features
■ 72 Kbytes EEPROM (including 192 bytes reserved manufacturer/security area)
■ 160 Kbytes User ROM
■ 4608 bytes RAM
◆ 256 bytes IRAM + 3 Kbytes CXRAM
◆ 1280 bytes FXRAM usable for FameXE
■ Memory Management and Protection Unit (MMU)
◆ for more details see 2.2. Security Features
■ Contactless Interface Unit (CIU) fully compatible with ISO/IEC14443A
◆ fully supports the T=CL protocol acc. ISO/IEC14443-4
◆ Data Transfer rates supported (106/212/424 kbit/s)
■ MIFARE® RF contactless interface acc. ISO/IEC14443-2
◆ 13.56 MHz operating frequency
◆ Reliable communication due to 100% ASK
◆ High speed (106/212/424 kbit/s, efficient frame support)
◆ True anticollision
◆ High speed CRC co-processor according to CCITT
■ MIFARE® reader infrastructure compatibility
■ High speed DES-3 co-processor (64 bit parallel processing DES engine)
■ PKI Co-processor FameXE
◆ The major Public Key Cryptosystems like RSA, El’Gamal, DSS, Diffie-Hellmann,
Guillou-Quisquater, Fiat-Shamir and Elliptic Curve are supported
◆ 4096 bits maximum key length for RSA with randomly chosen modulus
◆ 32-bit interface
◆ Boolean operations for acceleration of standard, symmetric cipher algorithms
◆ Performance example:
RSA Modular Exponentation (Straight forward) < 35 ms
(2048 bit key length and 17 bit exponent)
■ Optional free of charge MIFARE®1K and MIFARE® 4K functionality
■ 2 additional IO ports IO2 and IO3 for full-duplex serial data communication
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.2 — 4 October 2004
4 of 11
Philips Semiconductors
P5CD072
Secure Dual Interface PKI Smart Card Controller
2.2 Security Features
■ Enhanced Security Sensors
◆ Low / high clock frequency sensor
◆ Low / high temperature sensor
◆ Single Fault Injection (SFI) attack detection
◆ Light sensors
■ Electronic fuses for safeguarded mode control
■ Unique ID for each die
■ Clock Input Filter for protection against spikes
■ Power-up / Power-down reset
■ Optional programmable “Card Disable” feature
■ Memory Security (encryption and physical measures) for RAM, EEPROM and ROM
■ Memory Management and Protection Unit (MMU)
◆ Secure multi application operating systems via two different operation modes
- System Mode and Application Mode
◆ OS controlled access restriction mechanism to pheripherals in Application Mode
◆ Memory mapping up to 8 Mbytes Code memory
◆ Memory mapping up to 8 Mbytes (-64K) Data memory
■ Optional disabling of ROM read instructions by code executed in EEPROM
■ Optional disabling of any code execution out of RAM
■ EEPROM programming:
◆ No external clock
◆ Hardware sequencer controlled
◆ On-chip high voltage generation
◆ Enhanced error correction mechanism
■ 64 or 128 EEPROM bytes for customer-defined Security FabKey. Featuring batch-,
wafer- or die-individual security data, incl. encrypted diversification features on request
■ 14 bytes User Write Protected Security area in EEPROM (byte access, inhibit
functionality per byte)
■ 32 bytes Write Once Security area in EEPROM (bit access)
■ 32 bytes User Read Only area in EEPROM (byte access)
■ Customer specific EEPROM initialization optional
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.2 — 4 October 2004
5 of 11
Philips Semiconductors
P5CD072
Secure Dual Interface PKI Smart Card Controller
2.3 Family Standard Features
■ Dedicated Secure_MX51 Smart Card CPU (Memory eXtended / enhanced 80C51)
◆ 0.18 µ 5 metal layer CMOS technology
◆ operating in contact and contactless mode (dependent on family type option)
◆ featuring a 24 bit universal memory space, 24 bit program counter
◆ combined universal program/data linear address range up to 16 Mbyte
◆ additional instructions to improve
- pointer operations
- performance
- code density of both C and Java source code
■ Low power / low voltage design using Philips handshaking technology
■ Development and portation support of existing P8WE / P8RF family masks
■ Multiple source vectorized interrupt system with four priority levels
■ Watch exception provides for software debugging facility
■ Multiple source RESET system
■ Two 16-bit timers
■ High reliable EEPROM for both data storage and program execution
◆ Bytewise EEPROM programming and read access
◆ EEPROM endurance: up to 500.000 k programming cycles per byte
◆ EEPROM data retention time: 20 years minimum
■ Versatile EEPROM programming of 1 to 64 byte at a time
■ Typical EEPROM page erasing time: 2.5 ms
■ Typical EEPROM page programming time: 1.5 ms
■ Power-saving IDLE Mode
◆ Wake-up from IDLE Mode by RESET or any activated interrupt
■ Power-saving SLEEP (power down) Mode or CLOCKSTOP Mode
◆ Wake-up from SLEEP or CLOCKSTOP Mode by RESET or External Interrupt
■ Contact configuration and serial interface according to ISO/IEC 7816: GND, VCC,
CLK, RST, IO1
■ ISO/IEC 7816 UART supporting standard protocols T=0 and T=1 as well as high
speed personalization at 1Mbit/s
■ External or internally generated configurable CPU clock
■ 1 MHz to 10 MHz operating external clock frequency range
■ Internal CPU clock up to 30 MHz with synchronous operation
◆ Internal clocking independent of externally applied frequency
■ High speed Triple-DES co-processor (two or three keys loadable)
■ DES3 performance < 50 µs
■ High speed 16 bit CRC Engine according to CCITT polynom definition
■ Low power Random Number Generator (RNG) in hardware, FIPS140-2 compliant
■ 1.62V to 5.5V extended operating voltage range for class A, B and C
■ -25 to +85°C operating ambient temperature range
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.2 — 4 October 2004
6 of 11
Philips Semiconductors
P5CD072
Secure Dual Interface PKI Smart Card Controller
2.4 Design-in Support
■ Approved Development Tool Chain
◆ Keil PK51 development tool package incl. Vision2/dScopeC51 simulator, additional
specific hardware drivers incl. simulation of contactless interface and ISO/IEC 7816
card interface board. A “SmartMX DBox” allows software debugging and
integration tests. (www.keil.com)
◆ Ashling Ultra-Emulator platform, stand alone ROM prototyping boards and
ISO/IEC 7816 and ISO/IEC14443 card interface board. Code coverage and
performance measurement software tools for real time software testing.
(www.ashling.com)
◆ Dual Interface dummy modules OM6711 (PDM 1.1 - SOT658) with special antenna
bonding on C4 and C8 for testing the implanting process and antenna connection.
■ Software Libraries
◆ Libraries supporting contactless communication according to ISO/IEC 14443,
Part 3 and 4
◆ EEPROM Read / Write routines
3. Ordering information
Table 2:
Ordering information
Type number
Package
Name
Description
Version
-
P5CD072EW1/Tvsrrffo FFC
P5CD072EV0/Tvsrrffo Module
P5CD072EV1/Tvsrrffo Module
sawn wafer 150 µ on film frame carrier
Dual Interface Modules on super 35 mm format (8-contact)
SOT658BA3
SOT658BA3
Dual Interface Modules on super 35 mm format (8-contact) with
Antenna connected to C4/C8
P5CD072EV3/Tvsrrffo Module
pure contactless module MOB2 on super 35 mm format
SOT500 AA3
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.2 — 4 October 2004
7 of 11
Philips Semiconductors
P5CD072
Secure Dual Interface PKI Smart Card Controller
4. Block diagram
ROM
EEPROM
RAM
LA
RF
CIU
ISO 14443
72 Kbytes
DATA &
PROGRAM
MEMORY
4608 bytes
DATA
MEMORY
160 Kbytes
PROGRAM
MEMORY
INTERFACE
FameXE
LB
enhanced PUBLIC
KEY CO-
IO1
IO2
IO3
PROCESSOR e.g.
RSA, ECC
PROGRAMM-
ABLE
UART
ISO 7816
IO 1,2,3
Memory Management Unit (MMU)
SECURE_MX51 CPU
CLK
RST
CLOCK
FILTER
CLOCK
GENERATION
TRIPLE-DES
CO-PROCESSOR
TIMERS
SECURTIY SENSORS
RESET GENERATION
Fast
CRC16
RNG
16
16
BIT
T1
BIT
T0
VOLTAGE REGULATOR
VDD
VSS
ISO 7816
Dual Interface
(“Standard”)
P5CD072
VDD
C1
C5
VSS
CONTACTS
Symbol
VCC
RST
CLK
-
Symbol
VDD
RST
CLK
N.C.
VSS
N.C.
IO1
Description
C1
C2
C3
C4
C5
C6
C7
C8
Power supply voltage input
Reset input, active LOW
Clock input
RST
CLK
N.C.
IO1
C2
C3
C6
C7
*
LB
*
LA
not connected
GND
VPP
IO
Ground (reference voltage) input
not connected
N.C.
N.C.
C4
C8
Input/Output #1 for serial data
not connected
N.C.
-
-
-
-
-
LA
LB
antenna coil connection
antenna coil connection
*
Antenna contacts are placed on module backside
Note: IO2, IO3 and assignments on request.
Fig 2. Block diagram P5CD072.
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.2 — 4 October 2004
8 of 11
Philips Semiconductors
P5CD072
Secure Dual Interface PKI Smart Card Controller
5. Limiting values
[1]
Table 3:
Absolute maximum ratings
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VDD
Parameter
Conditions
Min
-0.5
-0.5
-
Max
Unit
V
Supply voltage
+6.0
VI
Input voltage on any signal pad
VDD +0.5
± 15.0
V
II; IO
DC input or output current on IO1, IO2 or IO3
pad
mA
Ilatchup
VESD
Latch up current
VI < 0 or VI > VDD
-
100
mA
[2]
Electrostatic discharge voltage
on pads VDD, VSS, CLK, RST, IO1, IO2, IO3
on all other pads
-
-
-
± 4.0
± 2.0
1
kV
kV
W
[3]
Ptot
Tstg
Total power dissipation per package
Storage temperature range
Table note [4] Table note [4]
[1] Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
[2] MIL Standard 883-D method 3015; Human body model; C = 100 pF, R = 1.5 kΩ; Tamb = -25 to +85 °C.
[3] Depending on appropriate thermal resistance of the package.
[4] Depending on delivery type, refer to “Philips General Specification for 8” Wafers” and to “Philips Contact & Dual Interface Chip Card
Module Specification”.
Table 4:
Symbol
VDD (5.0)
VDD (3.0)
VDD (1.8)
VI
Recommended operating conditions
Parameter
Conditions
Min
4.5
2.7
1.62
0
Typ.
5.0
Max
5.5
Unit
V
Supply voltage
5 V operation
3 V operation
1.8 V operation
3.0
3.3
V
1.8
1.98
VDD
V
DC input voltage on digital inputs and
digital IO pads
V
Tamb
Operating ambient temperature
-25
+85
°C
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.2 — 4 October 2004
9 of 11
P5CD072
Philips Semiconductors
Secure Dual Interface PKI Smart Card Controller
6. Data sheet status
Level Data sheet status[1] Product status[2] [3]
Definition
I
Objective data
Development
This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II
Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III
Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1]
[2]
Please consult the most recently issued data sheet before initiating or completing a design.
The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3]
For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
7. Definitions
8. Disclaimers
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
licence or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
9. Contact information
For additional information, please visit http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 XXXXX
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Short Form Specification
Rev. 1.1 — 4 October 2004
10 of 11
P5CD072
Philips Semiconductors
Secure Dual Interface PKI Smart Card Controller
10. Tables
[1]
Table 1: Configurations of the P5CD072 . . . . . . . . . . . . .3
Table 2: Ordering information. . . . . . . . . . . . . . . . . . . . . .7
Table 3: Absolute maximum ratings
. . . . . . . . . . . . . . 9
Table 4: Recommended operating conditions . . . . . . . . . 9
11. Figures
Fig 1. Configurations of the P5CD072. . . . . . . . . . . . . . .3
Fig 2. Block diagram P5CD072. . . . . . . . . . . . . . . . . . . . 8
12. Contents
1
1.1
1.2
1.2.1
1.2.1.1
1.2.1.2
1.2.1.3
General description . . . . . . . . . . . . . . . . . . . . . . 1
Family description. . . . . . . . . . . . . . . . . . . . . . . 1
Description P5CD072 device . . . . . . . . . . . . . . 1
Different Configurations of the P5CD072 . . . . . 2
Configuration A. . . . . . . . . . . . . . . . . . . . . . . . . 2
Configuration B1. . . . . . . . . . . . . . . . . . . . . . . . 2
Configuration B4. . . . . . . . . . . . . . . . . . . . . . . . 3
2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Product Specific Features. . . . . . . . . . . . . . . . . 4
Security Features . . . . . . . . . . . . . . . . . . . . . . . 5
Family Standard Features. . . . . . . . . . . . . . . . . 6
Design-in Support. . . . . . . . . . . . . . . . . . . . . . . 7
2.1
2.2
2.3
2.4
3
4
5
6
7
8
9
Ordering information. . . . . . . . . . . . . . . . . . . . . 7
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 10
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contact information . . . . . . . . . . . . . . . . . . . . 10
© Koninklijke Philips Electronics N.V. 2003
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.
Date of release: 4 October 2004
Document order number: 9397 750 XXXXX
Published in The Netherlands
相关型号：
©2020 ICPDF网 联系我们和版权申明