PTVS6V0P1UP 概述
600 W Transient Voltage Suppressor 600W的瞬态电压抑制器 瞬态抑制器
PTVS6V0P1UP 规格参数
是否Rohs认证: | 符合 | 生命周期: | Transferred |
包装说明: | PLASTIC PACKAGE-2 | 针数: | 2 |
Reach Compliance Code: | unknown | ECCN代码: | EAR99 |
HTS代码: | 8541.10.00.50 | 风险等级: | 5.75 |
Is Samacsys: | N | 最大击穿电压: | 7.37 V |
最小击穿电压: | 6.67 V | 配置: | SINGLE |
二极管元件材料: | SILICON | 二极管类型: | TRANS VOLTAGE SUPPRESSOR DIODE |
JESD-30 代码: | R-PDSO-F2 | JESD-609代码: | e3 |
湿度敏感等级: | 1 | 最大非重复峰值反向功率耗散: | 600 W |
元件数量: | 1 | 端子数量: | 2 |
最高工作温度: | 150 °C | 封装主体材料: | PLASTIC/EPOXY |
封装形状: | RECTANGULAR | 封装形式: | SMALL OUTLINE |
峰值回流温度(摄氏度): | 260 | 极性: | UNIDIRECTIONAL |
认证状态: | Not Qualified | 最大重复峰值反向电压: | 6 V |
表面贴装: | YES | 技术: | AVALANCHE |
端子面层: | TIN | 端子形式: | FLAT |
端子位置: | DUAL | 处于峰值回流温度下的最长时间: | 30 |
Base Number Matches: | 1 |
PTVS6V0P1UP 数据手册
通过下载PTVS6V0P1UP数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载PTVSxP1UP series
600 W Transient Voltage Suppressor
Rev. 2 — 6 January 2011
Product data sheet
1. Product profile
1.1 General description
600 W unidirectional Transient Voltage Suppressor (TVS) in a SOD128 small and flat lead
Surface-Mounted Device (SMD) plastic package, designed for transient overvoltage
protection.
1.2 Features and benefits
Rated peak pulse power: PPPM = 600 W Very low package height: 1 mm
Reverse standoff voltage range:
RWM = 3.3 V to 64 V
Reverse current: IRM = 0.001 μA
Small plastic package suitable for
V
surface-mounted design
AEC-Q101 qualified
1.3 Applications
Power supply protection
Automotive application
Industrial application
Power management
1.4 Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
Min
-
Typ
Max
600
64
Unit
W
[1]
PPPM
rated peak pulse power
reverse standoff voltage
-
-
VRWM
3.3
V
[1] In accordance with IEC 61643-321 (10/1000 μs current waveform).
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
2. Pinning information
Table 2.
Pinning
Pin
1
Description
cathode
Simplified outline
Graphic symbol
[1]
1
2
2
anode
1
2
sym035
[1] The marking bar indicates the cathode.
3. Ordering information
Table 3.
Ordering information
Type number[1]
Package
Name
-
Description
plastic surface-mounted package; 2 leads
Version
PTVSxP1UP series
SOD128
[1] The series consists of 35 types with reverse standoff voltages from 3.3 V to 64 V.
4. Marking
Table 4.
Marking codes
Type number
Marking code
Type number
PTVS20VP1UP
PTVS22VP1UP
PTVS24VP1UP
PTVS26VP1UP
PTVS28VP1UP
PTVS30VP1UP
PTVS33VP1UP
PTVS36VP1UP
PTVS40VP1UP
PTVS43VP1UP
PTVS45VP1UP
PTVS48VP1UP
PTVS51VP1UP
PTVS54VP1UP
PTVS58VP1UP
PTVS60VP1UP
PTVS64VP1UP
-
Marking code
PTVS3V3P1UP
PTVS5V0P1UP
PTVS6V0P1UP
PTVS6V5P1UP
PTVS7V0P1UP
PTVS7V5P1UP
PTVS8V0P1UP
PTVS8V5P1UP
PTVS9V0P1UP
PTVS10VP1UP
PTVS11VP1UP
PTVS12VP1UP
PTVS13VP1UP
PTVS14VP1UP
PTVS15VP1UP
PTVS16VP1UP
PTVS17VP1UP
PTVS18VP1UP
AJ
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
BG
BH
BJ
BK
-
AK
AL
AM
AN
AP
AQ
AR
AS
AT
AU
AV
AW
AX
AY
AZ
B1
B2
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
2 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
PPPM
Parameter
Conditions
Min
Max
Unit
[1]
[1]
rated peak pulse power
rated peak pulse current
-
-
600
W
IPPM
see
Table 9
and 10
IFSM
Non-repetitive peak
forward current
single half-sine
wave; tp = 8.3 ms
-
100
A
Tj
junction temperature
ambient temperature
storage temperature
-
150
°C
°C
°C
Tamb
Tstg
−55
−65
+150
+150
[1] In accordance with IEC 61643-321 (10/1000 μs current waveform).
Table 6.
ESD maximum ratings
Tamb = 25 °C unless otherwise specified.
Symbol Parameter
Per diode
Conditions
Min
Max Unit
[1][2]
VESD
electrostatic discharge voltage
IEC 61000-4-2
-
30
kV
(contact discharge)
[1] Device stressed with ten non-repetitive ElectroStatic Discharge (ESD) pulses.
[2] Soldering point of cathode tab.
Table 7.
ESD standards compliance
Standard
Per diode
Conditions
IEC 61000-4-2; level 4 (ESD)
> 15 kV (air); > 8 kV (contact)
> 4 kV
MIL-STD-883; class 3 (human body model)
6. Thermal characteristics
Table 8.
Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max Unit
[1]
[2]
[3]
[4]
Rth(j-a)
thermal resistance from
junction to ambient
in free air
-
-
-
-
-
-
-
-
200
120
60
K/W
K/W
K/W
K/W
Rth(j-sp)
thermal resistance from
junction to solder point
12
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
[3] Device mounted on a ceramic PCB, Al2O3, standard footprint.
[4] Soldering point of cathode tab.
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
3 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
7. Characteristics
Table 9.
Characteristics per type; PTVS3V3P1UP to PTVS7V0P1UP
Tj = 25 °C unless otherwise specified.
Type number
Reverse standoff Breakdown voltage
Reverse leakage
current
Clamping voltage
VCL (V)
voltage
VBR (V)
VRWM (V)
IRM (μA)
IR = 10 mA
at VRWM (V)
Max
3.3
5.0
6.0
6.5
7.0
Min
Typ
Max
6.00
7.00
7.37
7.98
8.60
Typ
5
Max
600
400
400
250
100
Max
8.0
IPPM (A)
75.0
PTVS3V3P1UP
PTVS5V0P1UP
PTVS6V0P1UP
PTVS6V5P1UP
PTVS7V0P1UP
5.20
6.40
6.67
7.22
7.78
5.60
6.70
7.02
7.60
8.20
5
9.2
65.2
5
10.3
11.2
12.0
58.3
5
53.6
3
50.0
Table 10. Characteristics per type; PTVS7V5P1UP to PTVS64VP1UP
Tj = 25 °C unless otherwise specified.
Type number
Reverse standoff Breakdown voltage
Reverse leakage
current
Clamping voltage
VCL (V)
voltage
VBR (V)
VRWM (V)
IRM (μA)
IR = 1 mA
Min
at VRWM (V)
Max
7.5
8.0
8.5
9.0
10
11
Typ
Max
Typ
Max
50
Max
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
IPPM (A)
46.5
44.1
41.7
39.0
35.3
33.0
30.2
27.9
25.9
24.6
23.1
21.7
20.5
18.5
16.9
15.4
14.3
13.2
12.4
11.3
10.3
9.3
PTVS7V5P1UP
PTVS8V0P1UP
PTVS8V5P1UP
PTVS9V0P1UP
PTVS10VP1UP
PTVS11VP1UP
PTVS12VP1UP
PTVS13VP1UP
PTVS14VP1UP
PTVS15VP1UP
PTVS16VP1UP
PTVS17VP1UP
PTVS18VP1UP
PTVS20VP1UP
PTVS22VP1UP
PTVS24VP1UP
PTVS26VP1UP
PTVS28VP1UP
PTVS30VP1UP
PTVS33VP1UP
PTVS36VP1UP
PTVS40VP1UP
8.33
8.77
9.21
0.2
8.89
9.36
9.83
0.03
25
9.44
9.92
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
0.01
10
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
10.55
11.70
12.85
14.00
15.15
16.40
17.60
18.75
19.90
21.00
23.35
25.60
28.10
30.40
32.80
35.10
38.70
42.10
46.80
0.005
0.005
0.005
0.005
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
5
2.5
2.5
2.5
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
4 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
Table 10. Characteristics per type; PTVS7V5P1UP to PTVS64VP1UP …continued
Tj = 25 °C unless otherwise specified.
Type number
Reverse standoff Breakdown voltage
Reverse leakage
current
Clamping voltage
VCL (V)
voltage
VBR (V)
VRWM (V)
IRM (μA)
IR = 1 mA
Min
at VRWM (V)
Typ
Max
43
45
48
51
54
58
60
64
Typ
Max
Max
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Max
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
IPPM (A)
8.6
PTVS43VP1UP
PTVS45VP1UP
PTVS48VP1UP
PTVS51VP1UP
PTVS54VP1UP
PTVS58VP1UP
PTVS60VP1UP
PTVS64VP1UP
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
50.30
52.65
56.10
59.70
63.15
67.80
70.20
74.85
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
8.3
7.8
7.3
6.9
6.4
6.2
5.8
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
5 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
006aab319
006aab321
150
1.2
P
PPM
I
PP
(%)
P
PPM(25°C)
100 % I ; 10 μs
100
PP
0.8
50 % I ; 1000 μs
PP
50
0.4
0
0
0
1.0
2.0
3.0
4.0
0
50
100
150
200
t
(ms)
T (°C)
j
p
Fig 1. 10/1000 μs pulse waveform according to
Fig 2. Relative variation of rated peak pulse power as
a function of junction temperature; typical
values
IEC 61643-321
006aac172
006aac173
5
4
10
10
P
(W)
C
d
(pF)
PPM
(1)
4
3
10
10
(2)
(3)
3
2
10
10
(4)
2
10
10
−1
2
3
4
2
10
1
10
10
10
10
1
10
10
t
p
(μs)
V
R
(V)
Tamb = 25 °C
Tamb = 25 °C; f = 1 MHz
(1) PTVS5V0P1UP
(2) PTVS12VP1UP
(3) PTVS24VP1UP
(4) PTVS64VP1UP
Fig 3. Rated peak pulse power as a function of pulse
duration; typical values
Fig 4. Diode capacitance as a function of reverse
voltage; typical values
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
6 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
I
−V
CL
−V
BR
−V
RWM
V
−I
RM
−I
R
−
+
P-N
−I
PP
−I
PPM
006aab324
Fig 5. V-I characteristics for a unidirectional TVS protection diode
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
9. Package outline
2.7
2.3
1.1
0.9
0.6
0.3
1
5.0 4.0
4.4 3.6
2
1.9
1.6
0.22
0.10
Dimensions in mm
07-09-12
Fig 6. Package outline SOD128
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
7 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
10. Packing information
Table 11. Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number[2]
Package
Description
Packing quantity
3000
PTVSxP1UP series SOD128
4 mm pitch, 12 mm tape and reel
-115
[1] For further information and the availability of packing methods, see Section 14.
[2] The series consists of 35 types with reverse standoff voltages from 3.3 V to 64 V.
11. Soldering
6.2
4.4
4.2
solder lands
solder resist
1.9 2.1
3.4 2.5
(2×) (2×)
solder paste
occupied area
Dimensions in mm
1.2
(2×)
1.4
(2×)
sod128_fr
Reflow soldering is the only recommended soldering method.
Fig 7. Reflow soldering footprint SOD128
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
8 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
12. Revision history
Table 12. Revision history
Document ID
Release date
20110106
Data sheet status
Change notice
Supersedes
PTVSXP1UP_SER v.2
Modifications:
Product data sheet
-
PTVSXP1UP_SER v.1
• Table 6 “ESD maximum ratings”: added.
• Section 13 “Legal information”: updated.
PTVSXP1UP_SER v.1
20100527
Product data sheet
-
-
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
9 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of an NXP Semiconductors product can reasonably be expected
13.2 Definitions
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
13.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
10 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
PTVSXP1UP_SER
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 6 January 2011
11 of 12
PTVSxP1UP series
NXP Semiconductors
600 W Transient Voltage Suppressor
15. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Test information. . . . . . . . . . . . . . . . . . . . . . . . . 7
Quality information . . . . . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7
Packing information . . . . . . . . . . . . . . . . . . . . . 8
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9
3
4
5
6
7
8
8.1
9
10
11
12
13
Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
13.1
13.2
13.3
13.4
14
15
Contact information. . . . . . . . . . . . . . . . . . . . . 11
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2011.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 6 January 2011
Document identifier: PTVSXP1UP_SER
PTVS6V0P1UP 替代型号
型号 | 制造商 | 描述 | 替代类型 | 文档 |
PTVS30VP1UP | NEXPERIA | 600 W Transient Voltage SuppressorProduction | 类似代替 | |
PTVS33VP1UP | NEXPERIA | 600 W Transient Voltage SuppressorProduction | 功能相似 | |
PTVS36VP1UP | NEXPERIA | 600 W Transient Voltage SuppressorProduction | 功能相似 |
PTVS6V0P1UP 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
PTVS6V0P1UP,115 | NXP | PTVSxP1UP series - 600 W Transient Voltage Suppressor SOD 2-Pin | 获取价格 | |
PTVS6V0P1UP-115 | NXP | DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC PACKAGE-2, Transient Suppressor | 获取价格 | |
PTVS6V0P1UP-Q | NEXPERIA | 600 W Transient Voltage SuppressorProduction | 获取价格 | |
PTVS6V0P1UTP | NXP | High-temperature 600 W Transient Voltage Suppressor | 获取价格 | |
PTVS6V0P1UTP | NEXPERIA | High-temperature 600 W Transient Voltage SuppressorProduction | 获取价格 | |
PTVS6V0P1UTP,115 | ETC | TVS DIODE 6V 10.3V CFP5 | 获取价格 | |
PTVS6V0P1UTP-Q | NEXPERIA | High-temperature 600 W Transient Voltage SuppressorProduction | 获取价格 | |
PTVS6V0S1UR | NXP | 400 W Transient Voltage Suppressor | 获取价格 | |
PTVS6V0S1UR | NEXPERIA | 400 W Transient Voltage SuppressorProduction | 获取价格 | |
PTVS6V0S1UR,115 | NXP | PTVSxS1UR series - 400 W Transient Voltage Suppressor SOD-123 2-Pin | 获取价格 |
PTVS6V0P1UP 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6