PUMB24,115 [NXP]
PEMB24; PUMB24 - PNP/PNP resistor-equipped transistors; R1 = 100 kOhm, R2 = 100 kOhm TSSOP 6-Pin;型号: | PUMB24,115 |
厂家: | NXP |
描述: | PEMB24; PUMB24 - PNP/PNP resistor-equipped transistors; R1 = 100 kOhm, R2 = 100 kOhm TSSOP 6-Pin 开关 光电二极管 晶体管 |
文件: | 总11页 (文件大小:64K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PEMB24; PUMB24
PNP/PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩ
Rev. 02 — 2 September 2009
Product data sheet
1. Product profile
1.1 General description
PNP/PNP resistor-equipped transistors
Table 1.
Product overview
Type number
Package
NXP
NPN/PNP
complement
NPN/NPN
complement
JEITA
-
PEMB24
PUMB24
SOT666
SOT363
PEMD24
PUMD24
PEMH24
PUMH24
SC-88
1.2 Features
I Built-in bias resistors
I Simplifies circuit design
I Reduces component count
I Reduces pick and place cost
1.3 Applications
I Low current peripheral driver
I Control of IC inputs
I Replacement of general-purpose transistors in digital applications
1.4 Quick reference data
Table 2.
Symbol
VCEO
IO
Quick reference data
Parameter
Conditions
Min
-
Typ
Max
−50
−20
130
1.2
Unit
V
collector-emitter voltage
output current (DC)
bias resistor 1 (input)
bias resistor ratio
open base
-
-
-
mA
kΩ
R1
70
0.8
100
1
R2/R1
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
2. Pinning information
Table 3.
Pinning
Pin
1
Description
Simplified outline
Symbol
GND (emitter) TR1
input (base) TR1
output (collector) TR2
GND (emitter) TR2
input (base) TR2
output (collector) TR1
6
5
4
6
5
4
2
3
R1 R2
4
TR2
5
TR1
1
2
3
R2 R1
6
001aab555
1
2
3
006aaa212
3. Ordering information
Table 4.
Ordering information
Type number
Package
Name
-
Description
Version
SOT666
SOT363
PEMB24
PUMB24
plastic surface mounted package; 6 leads
plastic surface mounted package; 6 leads
SC-88
4. Marking
Table 5.
Marking codes
Type number
PEMB24
Marking code[1]
6M
PUMB24
T7*
[1] * = -: made in Hong Kong
* = p: made in Hong Kong
* = t: made in Malaysia
* = W: made in China
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
2 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
5. Limiting values
Table 6.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
Per transistor
VCBO
VCEO
VEBO
VI
collector-base voltage
open emitter
open base
-
-
-
−50
−50
−10
V
V
V
collector-emitter voltage
emitter-base voltage
input voltage
open collector
positive
-
-
-
-
+10
−40
−20
−100
V
negative
V
IO
output current (DC)
peak collector current
total power dissipation
SOT363
mA
mA
ICM
Ptot
Tamb ≤ 25 °C
[1]
-
200
mW
mW
°C
[1] [2]
SOT666
-
200
Tstg
storage temperature
junction temperature
ambient temperature
−65
-
+150
150
Tj
°C
Tamb
−65
+150
°C
Per device
Ptot
total power dissipation
SOT363
Tamb ≤ 25 °C
[1]
-
-
300
300
mW
mW
[1] [2]
SOT666
[1] Device mounted on an FR4 printed-circuit board, single-sided copper, standard footprint.
[2] Reflow soldering is the only recommended soldering method.
6. Thermal characteristics
Table 7.
Symbol
Per transistor
Thermal characteristics
Parameter
Conditions
Min
Typ
Max Unit
Rth(j-a)
thermal resistance from
Tamb ≤ 25 °C
junction to ambient
[1]
SOT363
-
-
-
-
625
625
K/W
K/W
[1] [2]
SOT666
Per device
Rth(j-a)
thermal resistance from
junction to ambient
Tamb ≤ 25 °C
[1]
SOT363
SOT666
-
-
-
-
416
416
K/W
K/W
[1] [2]
[1] Device mounted on an FR4 printed-circuit board, single-sided copper, standard footprint.
[2] Reflow soldering is the only recommended soldering method.
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
3 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
7. Characteristics
Table 8.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions
Per transistor
ICBO
Min
Typ
Max
Unit
collector-base cut-off VCB = −50 V; IE = 0 A
-
-
−100
nA
current
ICEO
collector-emitter
cut-off current
VCE = −30 V; IB = 0 A
-
-
-
-
−1
µA
µA
VCE = −30 V; IB = 0 A;
Tj = 150 °C
−50
IEBO
emitter-base cut-off
current
VEB = −5 V; IC = 0 A
-
-
−50
µA
hFE
DC current gain
VCE = −5 V; IC = −5 mA
80
-
-
-
-
VCEsat
collector-emitter
IC = −5 mA; IB = −0.25 mA
−150
mV
saturation voltage
VI(off)
VI(on)
R1
off-state input voltage VCE = −5 V; IC = −100 µA
on-state input voltage VCE = −0.3 V; IC = −1 mA
bias resistor 1 (input)
-
−1.2
−1.6
100
1
−0.5
-
V
−3
70
0.8
-
V
130
1.2
2.5
kΩ
R2/R1
Cc
bias resistor ratio
collector capacitance VCB = −10 V; IE = ie = 0 A;
-
pF
f = 1 MHz
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
4 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
006aaa188
006aaa189
3
−1
10
−10
h
FE
V
CEsat
(V)
(1)
(2)
(1)
(2)
(3)
(3)
2
10
−2
10
−10
−10
−1
2
−1
−1
−10
−10
−10
−1
−10
I
(mA)
I (mA)
C
C
VCE = −5 V
IC/IB = 20
(1) Tamb = 150 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
Fig 1. DC current gain as a function of collector
current; typical values
Fig 2. Collector-emitter saturation voltage as a
function of collector current; typical values
006aaa190
006aaa191
−10
−10
V
V
I(off)
(V)
I(on)
(1)
(1)
(V)
(2)
(3)
(2)
(3)
−1
−1
−1
−1
−10
−10
−1
−2
−1
−10
−1
−10
−10
−10
−1
−10
I
(mA)
I (mA)
C
C
VCE = −0.3 V
VCE = −5 V
(1) Tamb = −40 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
(1) Tamb = −40 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
Fig 3. On-state input voltage as a function of
collector current; typical values
Fig 4. Off-state input voltage as a function of
collector current; typical values
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
5 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
8. Package outline
Plastic surface-mounted package; 6 leads
SOT363
D
B
E
A
X
y
H
v
M
A
E
6
5
4
Q
pin 1
index
A
A
1
1
2
3
c
e
1
b
p
L
p
w
M B
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
A
1
UNIT
A
b
c
D
E
e
e
H
L
Q
v
w
y
p
p
1
E
max
0.30
0.20
1.1
0.8
0.25
0.10
2.2
1.8
1.35
1.15
2.2
2.0
0.45
0.15
0.25
0.15
mm
0.1
1.3
0.65
0.2
0.2
0.1
REFERENCES
JEDEC JEITA
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
04-11-08
06-03-16
SOT363
SC-88
Fig 5. Package outline SOT363 (SC-88)
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
6 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
Plastic surface-mounted package; 6 leads
SOT666
D
A
E
X
Y
S
S
H
E
6
5
4
pin 1 index
A
c
1
2
3
e
1
b
p
w
M
A
L
p
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
b
c
D
E
e
e
H
L
w
y
A
p
p
1
E
0.6
0.5
0.27
0.17
0.18
0.08
1.7
1.5
1.3
1.1
1.7
1.5
0.3
0.1
mm
1.0
0.5
0.1
0.1
REFERENCES
JEDEC JEITA
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
04-11-08
06-03-16
SOT666
Fig 6. Package outline SOT666
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
7 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
9. Packing information
Table 9.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code. [1]
Type number
Package
Description
Packing quantity
3000
-
4000
10000
-
PEMB24
PUMB24
PUMB24
SOT666
SOT363
SOT363
4 mm pitch, 8 mm tape and reel
4 mm pitch, 8 mm tape and reel; T1
4 mm pitch, 8 mm tape and reel; T2
-115
[2]
[3]
-115
-125
-
-
-135
-165
[1] For further information and the availability of packing methods, see Section 12.
[2] T1: normal taping
[3] T2: reverse taping
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
8 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
10. Revision history
Table 10. Revision history
Document ID
Release date
20090902
Data sheet status
Change notice
Supersedes
PEMB24_PUMB24_2
Modifications:
Product data sheet
-
PEMB24_PUMB24_1
• This data sheet was changed to reflect the new company name NXP Semiconductors,
including new legal definitions and disclaimers. No changes were made to the technical
content.
• Figure 5 “Package outline SOT363 (SC-88)”: updated
• Figure 6 “Package outline SOT666”: updated
PEMB24_PUMB24_1
20050218
Product data sheet
-
-
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
9 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
11. Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
11.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
PEMB24_PUMB24_2
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 2 September 2009
10 of 11
PEMB24; PUMB24
NXP Semiconductors
PNP/PNP resistor-equipped transistors; R1 = 100 kΩ, R2 = 100 kΩ
13. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics. . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
Packing information. . . . . . . . . . . . . . . . . . . . . . 8
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9
3
4
5
6
7
8
9
10
11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
11.1
11.2
11.3
11.4
12
13
Contact information. . . . . . . . . . . . . . . . . . . . . 10
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2009.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 2 September 2009
Document identifier: PEMB24_PUMB24_2
相关型号:
PUMB24/T1
TRANSISTOR 20 mA, 50 V, 2 CHANNEL, PNP, Si, SMALL SIGNAL TRANSISTOR, PLASTIC, SMD, SC-88, 6 PIN, BIP General Purpose Small Signal
NXP
PUMB24/T2
TRANSISTOR 20 mA, 50 V, 2 CHANNEL, PNP, Si, SMALL SIGNAL TRANSISTOR, PLASTIC, SMD, SC-88, 6 PIN, BIP General Purpose Small Signal
NXP
PUMB2T/R
TRANSISTOR 100 mA, 50 V, 2 CHANNEL, PNP, Si, SMALL SIGNAL TRANSISTOR, PLASTIC, SC-88, 6 PIN, BIP General Purpose Small Signal
NXP
PUMB3,115
PEMB3; PUMB3 - PNP/PNP resistor-equipped transistors; R1 = 4.7 kOhm, R2 = open TSSOP 6-Pin
NXP
PUMB3/T1
TRANSISTOR 100 mA, 50 V, 2 CHANNEL, PNP, Si, SMALL SIGNAL TRANSISTOR, PLASTIC, SC-88, 6 PIN, BIP General Purpose Small Signal
NXP
©2020 ICPDF网 联系我们和版权申明