TEF6688HN/V101 [NXP]
Low IF tuner high performance one-chip;
| 型号： | TEF6688HN/V101 |
| 厂家： | 
NXP |
| 描述： | Low IF tuner high performance one-chip |
| 文件： | 总8页 (文件大小：126K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TEF668X
Low IF tuner high performance one-chip
Rev. 1 — 30 July 2013
Product short data sheet
1. General description
The Low IF Tuner HIgh performance One chips, TEF6686 and TEF6688, are single-chip
radio ICs including an AM/FM radio tuner and software-defined radio signal processing.
They extend NXP Semiconductors’ broad, industry-proven car radio single tuner portfolio,
offering outstanding radio performance with the widest range of features and state of the
art software algorithms at most optimized system costs.
Both devices are available in HVQFN packages occupying the smallest PCB space and
are suitable for dual- and multi-layer PCBs. The radio receiver includes highest feature
sets, the FM/AM front-ends, tuning synthesizer, channel filtering, FM Channel
Equalization, FM multipath improvement, demodulation, FM stereo decoding, weak signal
processing, noise blanking and RDS and provides an interface to a DARC
demodulator/decoder.
The TEF6686 and TEF6688 can provide stereo audio in digital format on the I²S outputs
and on the audio DAC outputs. The TEF6688 supports the digital radio standards HD
Radio and Digital Radio Mondiale (DRM) digital radio when used with NXP
Semiconductors’ digital radio coprocessors such as SAF356X and SAF360X.
2. Features and benefits
Alignment free digital receiver including tuner and software-defined radio processing
Command based high-level user interface combining high control flexibility with ease
of control
Read information with device and tuning status, reception quality and RDS data
FM receiver with a tuning range of 65 MHz to 108 MHz covering Eastern Europe
(OIRT), Japan, Europe and US bands
AM receiver covering LW, MW and full SW
Fully integrated tuning system with low phase noise and fast tuning
FM LNA with AGC
State-of-the art FM Improved Multipath Suppression
FM Channel Equalization
Soft Mute on Modulation
Stereo High Blend
FM mixer for frequency conversion to a low IF complex signal (AM SW)
AM LNA with AGC, matching active and passive antenna applications
AM mixer for frequency conversion to a low IF complex signal
TEF668X
NXP Semiconductors
Low IF tuner high performance one-chip
High dynamic range Sigma Delta IF ADC
Digital IF signal processing including decimation, shift to baseband, AGC control, I/Q
correction, variable IF bandwidth filtering (PACS) and demodulation
FM stereo decoding
TEF6688 baseband I2S output supporting HD Radio and DRM1 with external digital
radio coprocessor (SAF356X or SAF360X)
Blending function for HD Radio reception (TEF6688)
AM and FM noise blanking, Signal quality detection and weak signal processing
Advanced RDS and RBDS demodulation and decoding
MPX output supporting DARC demodulator
One I2S input and one I2S output
Two mono audio DACs
Single 3.3 V supply voltage
Fast mode I2C-bus (400 kHz)
Configurable GPIO pins for RDS, Quality Status Interrupt and generic I2C-bus
controlled I/O
Qualified in accordance with AEC-Q100
3. Applications
The TEF668X is a single tuner AM/FM receiver for automotive applications and supports
analog AM/FM and HD/DRM reception (HD/DRM is supported in TEF6688 only).
Additionally, due to a common technology platform, the TEF668X can be combined with
TEF701X, SAF775X and SAF360X for optimal system application through common
crystal oscillator sharing.
4. Quick reference data
Table 1.
Quick reference data
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
Supply voltage
VDDA(RF)(3V3) RF analog supply voltage (3.3 V) on pin VDDA_RF
VDDA(IF)(3V3) IF analog supply voltage (3.3 V) on pin
VDDA_IFADC
on pin
3.0
3.0
3.3
3.3
3.5
3.5
V
V
VDDD(3V3)
digital supply voltage (3.3 V)
3.0
3.3
3.5
V
VDD_DIGITAL
Current in FM mode
IDDA(RF)
RF analog supply current
on pin VDDA_RF
33
81
37
94
42
mA
mA
IDDA(IFADC)
IF ADC analog supply current
on pin
110
VDDA_IFADC
IDDD
digital supply current
on pin VDDD
37
34
38
40
48
48
mA
mA
Current in AM - MW/LW mode
IDDA(RF)
RF analog supply current
on pin VDDA_RF
1. DRM includes DRM30 and DRM+ (band and )
TEF668X_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 1 — 30 July 2013
2 of 8
TEF668X
NXP Semiconductors
Low IF tuner high performance one-chip
Table 1.
Symbol
IDDA(IFADC)
Quick reference data …continued
Parameter
Conditions
Min
Typ
Max
Unit
IF ADC analog supply current
on pin
63
74
86
mA
VDDA_IFADC
IDDD
digital supply current
on pin VDDD
33
34
46
mA
Current in Standby mode
IDDA(RF)
RF analog supply current
on pin VDDA_RF
0
0.3
37
2
mA
mA
IDDA(IFADC)
IF ADC analog supply current
on pin
25
45
VDDA_IFADC
IDDD
digital supply current
on pin VDDD
15
24
35
mA
5. Ordering information
Table 2.
Ordering information
Type number
Package
Name
Description
Version
TEF6686HN/V101 HVQFN32
TEF6688HN/V101
plastic thermal enhanced very thin quad flat package; no leads;
32 terminals; body 5 5 0.85 mm[1]
SOT617-3
[1] Wettable sides to allow for optical inspection.
TEF668X_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 1 — 30 July 2013
3 of 8
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
6. Block diagram
XTAL
OSC
DIGITAL
TUNING
SYSTEM
DCO
DIVIDERS
TEF668X
FM
BPF
FM FRONT-END
AM FRONT-END
DAC_R
DAC_L
STEREO
DAC
AUDIO
PROCESSING
ADC
RADIO PROCESSING
(1)
DR_BL
AM
BPF
IC CONTROL
UNIT
SDA
SCL
2
2
DIGITAL RADIO
INTERFACE
I S INPUT
I S OUTPUT
BUFFER
2
POWER
3.3 V
I C
BUFFER
(1)
(1)
DR_BCK
DR_I_DATA
(1)
I2S_SD_0
I2S_BCK
I2S_SD_1
(2)
GPIO_1
GPIO_0
DR_WS
I2S_WS
aaa-003749
(1)
(2)
DR_Q_DATA
GPIO_2
(1) TEF6688
(2) GPIO_1 and GPIO_2 are output only.
Fig 1. Block diagram
TEF668X
NXP Semiconductors
Low IF tuner high performance one-chip
7. Limiting values
Table 3.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions
Min
Max
+3.9
+3.9
+3.9
+0.3
Unit
V
VDDA(RF)(3V3) RF analog supply voltage (3.3 V) on pin VDDA_RF
VDDA(IF)(3V3) IF analog supply voltage (3.3 V) on pin VDDA_IFADC
0.5
0.5
0.5
0.3
V
VDDD(3V3)
digital supply voltage (3.3 V)
on pin VDDD
V
VDD(3V3-3V3) supply voltage difference
between pins VDDA_IFADC and
VDDA_RF
V
between two 3.3 V supplies
Vn
Ilu
voltage on any other pin
latch-up current
0.5
+VDDD(3V3) + 0.3 V
[1]
all supply voltages below the
maximum value
100
+100
mA
Vlu
latch-up voltage
-
1.5 VDDD(3V3)
+150
V
Tstg
Tamb
Tj
storage temperature
ambient temperature
junction temperature
55
40
40
C
C
C
+85
+125
[1] In accordance with AEC-Q100-004.
8. Revision history
Table 4.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
TEF668X_SDS v.1
20130730
Product short data sheet
-
-
TEF668X_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 1 — 30 July 2013
5 of 8
TEF668X
NXP Semiconductors
Low IF tuner high performance one-chip
9. Legal information
9.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
9.2
Definitions
applications. Unless otherwise agreed in writing, the product is not designed,
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
9.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
TEF668X_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 1 — 30 July 2013
6 of 8
TEF668X
NXP Semiconductors
Low IF tuner high performance one-chip
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
9.4
Licenses
ICs with HD Radio functionality
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
NXP Semiconductors ICs with HD Radio functionality are manufactured
under license from iBiquity Digital Corporation. Sale or distribution of
equipment that includes this device requires a license, which may be
obtained at: iBiquity Digital Corporation, 6711 Columbia Gateway Drive,
Suite 500, Columbia MD 21046, USA. Telephone: +1 (443) 539 4290, fax:
+1 (443) 539 4291, e-mail: info@ibiquity.com.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
9.5
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I2C-bus — logo is a trademark of NXP B.V.
HD Radio — is a trademark of iBiquity Digital Corporation.
HD Radio — logo is a registered trademark of iBiquity Digital Corporation.
10. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
TEF668X_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 1 — 30 July 2013
7 of 8
TEF668X
NXP Semiconductors
Low IF tuner high performance one-chip
11. Contents
1
2
3
4
5
6
7
8
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Quick reference data . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 3
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 5
9
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 6
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 6
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
9.1
9.2
9.3
9.4
9.5
10
11
Contact information. . . . . . . . . . . . . . . . . . . . . . 7
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2013.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 30 July 2013
Document identifier: TEF668X_SDS
相关型号：
TEF668X
Low IF tuner high performance one-chipWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6700HL
Car radio tuner front-end for digital IFWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6700HL/V1,518
TEF6700HL - Car radio tuner front-end for digital IF QFP 64-PinWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6700HL/V1,557
TEF6700HLWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6700HL/V1/S1,51
TEF6700HL - Car radio tuner front-end for digital IF QFP 64-PinWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6700HL/V1/S422
TEF6700HL/V1/S422Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6701HL
Car radio tuner front-end for digital IFWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6721HL
Car radio tuner front-end for digital IFWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6721HL/V1KT,518
TEF6721HL - Car radio tuner front-end for digital IF QFP 64-PinWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6721HL/V1S,518
TEF6721HL - Car radio tuner front-end for digital IF QFP 64-PinWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6721HL/V1S,557
TEF6721HL - Car radio tuner front-end for digital IF QFP 64-PinWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
TEF6721HL/V1T,518
TEF6721HL - Car radio tuner front-end for digital IF QFP 64-PinWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NXP
©2020 ICPDF网 联系我们和版权申明