HS50 1R J [OHMITE]
RES CHAS MNT 1 OHM 5% 50W;型号: | HS50 1R J |
厂家: | OHMITE MFG. CO. |
描述: | RES CHAS MNT 1 OHM 5% 50W |
文件: | 总3页 (文件大小:427K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HS Aluminium Housed Resistors
Manufactured in line with the requirements of MIL 18546 and
IEC 115, designed for direct heatsink mounting with thermal
compound to achieve maximum performance.
• High Power to volume
• Wound to maximise High Pulse Capability
• Values from R005 to 100K
• Custom designs welcome
• RoHS Compliant
200
100
5
0
20
50
75 100
150
200
250
300
POWER DISSIPATION (WATTS)
ARCOL UK Limited,
The information contained herein does not form part of a
contract and is subject to change without notice. ARCOL
operate a policy of continual product development, therefore,
specifications may change.
Threemilestone Ind. Estate,
Truro, Cornwall, TR4 9LG, UK.
T +44 (0) 1872 277431
F +44 (0) 1872 222002
It is the responsibility of the customer to ensure that the
component selected from our range is suitable for the intended
application. If in doubt please ask ARCOL.
E sales arcolresistors.com
@
For more information and ordering, please consult
www.arcolresistors.com
Page 1 of 2
12/14.08
HS Aluminium Housed Resistors
Page 2 of 2
12/14.08
HS Series Resistor Terminations
The HS Range of Aluminium Housed Resistors has
been designed for a variety of solder, cable, threaded
and fast on terminations. If you need a special
termination design for your application, please contact
us for advice.
For electrical and mechanical specifications please refer
to HS Series datasheet - Aluminium Housed Power
Resistors.
HS _ _ _ - Standard Pressed Termination
Available on HS10-50, 75-150
HS _ _ _ J - Unpressed Termination
Available on HS10-50, 75-150
HS _ _ _ X - Extended Mouldings
To increase creepage and strike distance between terminal and
housing. Available on HS10-50, HS75-150
Also available on HS200-300 E6 using stud mounted resin disk
HS _ _ _ M - 6.35mm Spade Termination
Amp style push on connection
Available on HS10-50, HS75-150
HS _ _ _ Drawing No. - Attached Termination To Drawing
Available on HS10-50, HS75-150
HS _ _ _ E - Threaded Stud Termination
Available on HS25-50 E3, HS75-150 E4 or E6, HS200-300 E6
HS _ _ _ F - Leaded Termination
Leads fitted and insulated externally after moulding
Available with standard lead lengths on HS10-50 150mm,
HS75-150 150mm, HS200-300 300mm
Extra length available on request at extra charge
For other special terminations, high voltage, low inductance windings, water cooled type HSW600 etc. please contact Arcol sales.
ARCOL UK Limited,
The information contained herein does not form part of
a contract and is subject to change without notice. Arcol
operate a policy of continual product development, therefore,
specifications may change.
Threemilestone Ind. Estate,
Truro, Cornwall, TR4 9LG, UK.
T +44 (0) 1872 277431
F +44 (0) 1872 222002
Itistheresponsibilityofthecustomertoensurethatthecomponent
selectedfromourrangeissuitablefortheintendedapplication.Ifin
doubt please ask Arcol.
E sales arcolresistors.com
@
www.arcolresistors.com
Page 1 of 1
3 / 06.48
相关型号:
©2020 ICPDF网 联系我们和版权申明