TEH100M270RJE 概述
Low thermal resistance
TEH100M270RJE 数据手册
通过下载TEH100M270RJE数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载F E aT u ꢀ E S
TEH100 Series
• 100 Watt power rating at
25°C case temperature
100 Watt Thick Film Power Resistors for High
Frequency and Pulse Loading Applications
• Non-inductive performance
• Low thermal resistance
• RoHS compliant design
• TO-247 package configura-
tion
• Single screw mounting
simplifies attach-ment to
the heat sink
• A totally molded housing
for enviromental protection
Ohmite offers the totally
encapsulated and insulated
TO-247 package for low
ohmic value and non-induc-
tive design for high-frequen-
cy and pulsing applications.
Ideal use is for power sup-
plies. This series is rated
at 100 Watts mounted to a
heat sink.
• Non-Inductive design
• Resistor package totally
insulated from heat sink
cHaꢀacTEꢀꢁSTꢁcS
thick film on alumina
high temperature plastic
Tinned Copper
Resistor
Case
Test Conditions Of Test
Performance
MIL-R-39009D 4.8.13 , 2,000
∆R ≤ ±(1.0% + 0.0005Ω)
Load life
hours at rated power
Lead Material
-10°C - +65°C, RH>90%, cycle ∆R ≤ ±(0.50% + 0.0005Ω)
240 h
Moisture resis-
tance
0.9 Nm using an M3 screw and a
compression washer
Installation, max.
Torque
1.5 times rated power and
V(DC) ≤1.5Vmax for 5 seconds
∆R ≤ ± (0.50% + 0.0005Ω)
∆R ≤ ±(0.50% + 0.0005Ω)
∆R ≤ ± (0.15% + 0.0005Ω)
∆R ≤ ±(0.20% + 0.0005Ω)
∆R ≤ ±(0.40% + 0.0005Ω)
Short time
overload
linear, 100% at 25°C to 0% at
175°C
Derating
GJB360A-96 method 107,
Cond. F
Thermal shock
0.05Ω to 1MΩ, other values on
request
Resistance range
GJB360A-96 method 301,
(1,800V AC, 60s)
Dielectric
strength
±1%, ±2%, ±5%, ±10%
350V
Resistance tol.
Max. working voltage
GJB360A-96 method 211,
Cond. A (Pull Test) 2.4N
Terminal
strength
>10Ω: 50ppm/°C, ref. to 25°C
3 to 10Ω: 100ppm/°C
1 to 2.99Ω: 250ppm/°C
<1Ω: 500-1000+ppm/°C (Contact
factory for exact values below
1Ω)
Temperature
Coefficient
GJB360A-96 method 204,
Cond. D
High frequency
vibration
Derating
100
80
60
40
20
0
10GΩ min.
Insulation Resistance
Dielectric Strength
1,800 VAC
THIS PRODUCT IS DESIGNED FOR
USE WITH PROPER HEATSINKING.
Maximum base plate temperature of the resistor must be
monitored and kept within specified limits to establish
the power rating. Best technique is to attach a ther-
mocouple to the side of the base plate of the resistor.
Temperature of plastic housing or heat sink cannot be
used to establish rating of the resistor.
0
25
50
75
100
125
150
175
Bottom of base plate Temperature, °C
Derating (thermal resistance): 0.666W/°K (1.5K/W). Without a heatsink, when in free air at
25°C, the TEH100 is rated for 3.5W. Derating for temp. above 25°C is 0.0234W/°K.
Graphed value is only valid when using a thermal conduction to the heatsink Rth-
cs<0.025°K/W. This value can be reached by using thermal transfer compound with a
heat conductivity of 1W/mK. The flatness of the cooling plate must be better than 0.05mm
overall. The roughness of the surface should not exceed 6.4µm. The case temperature is
to be used for the definitiion of the applied power limit. The case temperature measurement
must be made with a thermocouple contacting the center of the component mounted on the
designed heat sink. Thermal grease should be applied properly
(continued)
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
152
TEH100 Series
100 Watt Thick Film Power Resistors for High
Frequency and Pulse Loading Applications
dꢁmEnSꢁonS
(in./mm)
0.610~0.630"
(15.49~16.01mm)
0.185~0.205"
(4.69~5.21mm)
0.200~0.220"
(5.07~5.59mm)
0.805~0.825"
(20.44~20.96mm)
ø0.139~0.147"
(3.53~3.73mm)
0.080~0.140"
(2.03~3.55mm)
0.520~0.620"
“M” option
“L” option
(13.21~15.75mm)
0.136~0.150"
(3.45~3.81mm)
0.807~0.886"
(20.50~22.50mm)
0.022~0.042"
(0.55~1.07mm)
“M”
0.054~0.066"
(1.37~1.67mm)
0.085~0.105"
(2.15~2.67mm)
“L”
0.390~0.410"
(9.90~10.42mm)
0.042~0.054"
(1.07-1.37mm)
oꢀdEꢀꢁng ꢁnFoꢀmaTꢁon
Package Code
M = standard
L = long terminals
RoHS Compliant
Non-compliant
version unavailble
T E H 1 0 0 M 1 0 R 0 J E
Series
Ohms
R = Decimal
Example:
Tolerance
F = 1%
J
= 5%
2R50 = 2.50Ω
25R0 = 25Ω
100R = 100Ω
1K00 = 1000Ω
Standard part numbers
Ohms
5% tolerance
1% tolerance
0.05
TEH100MR050JE
TEH100MR075JE
TEH100MR100JE
TEH100MR200JE
TEH100MR500JE
0.075
0.1
0.2
0.5
1
TEH100M1R00JE
TEH100M2R00JE
TEH100M2R50JE
TEH100M3R00JE
TEH100M5R00JE
TEH100M1R00FE
TEH100M2R00FE
TEH100M2R50FE
TEH100M3R00FE
TEH100M5R00FE
2
2.5
3
5
7.5
TEH100M7R50JE
TEH100M10R0JE
TEH100M15R0JE
TEH100M20R0JE
TEH100M25R0JE
TEH100M7R50FE
TEH100M10R0FE
TEH100M15R0FE
TEH100M20R0FE
TEH100M25R0FE
10
15
20
25
50
100
270
470
750
TEH100M50R0JE
TEH100M100RJE
TEH100M270RJE
TEH100M470RJE
TEH100M750RJE
TEH100M50R0FE
TEH100M100RFE
1K
TEH100M1K00JE
TEH100M5K00JE
TEH100M7K50JE
5K
7.5K
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
153
TEH100M270RJE 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
TEH100M2R00FE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M2R00JE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M2R50FE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M2R50JE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M3R00FE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M3R00JE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M470RJE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M50R0FE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M50R0JE | OHMITE | 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications | 获取价格 | |
TEH100M5K00JE | OHMITE | Low thermal resistance | 获取价格 |
TEH100M270RJE 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6