TNP10SA7R50FE [OHMITE]
RES 7.5 OHM 10W 1% TO126;型号: | TNP10SA7R50FE |
厂家: | OHMITE MFG. CO. |
描述: | RES 7.5 OHM 10W 1% TO126 |
文件: | 总2页 (文件大小:501K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TNP10 Series
Thin Film TO-126 Resistor
Ohmite offers a high power heatsinkable TO-126 packaged
resistor. They can achieve 1W in free air and 10W when
attached to a proper heatsink. The non-inductive design is ideal
for high speed circuits. These models exhibit low noise, high
frequency operation and high density installation. Applications
include: Constant current sources, electronic load circuits, LSI
tests, measurement, audio PA systems and motor control.
This product has been
DISCONTINUED
SPꢁcꢂfꢂcaTꢂoNS
Resistance
TCR
Heat
Series
Wattage*
Range (Ω)
0.09-0.1
0.1-9.1
Tolerance
5% (J)
±1% (F), 5% (J)
±1% (F)
(ppm/°C) Resistance**
±250
±100
±50
TNP10S
10W
5.9°C/W
10-51K
* Flange temp. -55° - 25°C; 1W at free air **From hot spot to flange
chaꢀacTꢁꢀꢂSTꢂcS
Values listed below; others on request
-55°C to +155°C
Resistance Range
Temp. Range
Item Performance
Condition
2000VAC
60 sec., between termi-
nals and flange
Dielectric
Withstanding
Voltage
+25°C
Rated Temperature
Rated Power
10W (-55 to 25°C flange temperature),
1W free air
Over 1000MΩ
±(1.0%+0.05Ω)
±(1.0%+0.05Ω)
±(1.0%+0.05Ω)
Between terminals and
flange
Insulation
Resistance
60°C, 90 to 95%RH, DC
0.1W, 1000 hrs.
Moisture
Resistance
Derating
Temperature Rise
25°C, 90min. ON, 30min.
OFF, 1000hrs
Load Life
10
8
120
90
60
30
0
25°
350 ±5°C, 3 sec.
Soldering Heat
Solderability
Vibration
6
Over 95% of surface 230 ±5°C, 3 sec.
±0.25% IEC 60068-2-6
4
2
0
-55°
0°
50° 100° 155° 200°
0
2.5
5
7.5
10
Flange Temp. (°C)
Applied Power (W)
*with 2.8K/W heatsink
THIS PRODUCT IS DESIGNED
FOR USE WITH PROPER
HEATSINKING.
Coonstruction
Maximum base plate temperature of the resistor
must be monitored and kept within speci-
fied limits to establish the power rating. Best
technique is to attach a thermocouple to the side
of the base plate of the resistor. Temperature of
plastic housing or heat sink cannot be used to
establish rating of the resistor.
Leads (tin plated Cu)
Molding (epoxy UL94-VO)
Conductor (Cu)
Resistor (Ni-Cr or RuO)
Substrate (alumina)
Flange (Ni plated Cu)
(continued)
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
152
TNP10 Series
Thin Film TO-126 Resistor
dꢂmꢁNSꢂoNS
(in./mm)
0.33"
(8.ꢁmm .ꢀ2
0.12"
(3.1mm .ꢀ2
0.15"
(3.8mm .ꢀ2
0.47"
(1ꢀ.0mm .ꢀ2
ø0.12"
(3.1mm .12
0.13"
(3.ꢀmm .ꢁ2
0.67"
(17.0mm 1.02
0.6"
(1.40mm .0ꢁ2
0.02"
(0.ꢁmm .0ꢁ2
0.02"
(0.6mm .0ꢁ2
0.07"
(1.7ꢁmm .12
0.20"
(ꢁ.08mm .0ꢁ2
oꢀdꢁꢀꢂNg ꢂNfoꢀmaTꢂoN
Tolerance
F = 1%
J = 5%
Standard part numbers
Other values on request
TNP10SHR100JE TNP10SA5R00FE TNP10SC75R0FE
T N P 1 0 S C 5 0 R 0 F E
TNP10SHR150JE TNP10SA7R50FE TNP10SC100RFE
TNP10SAR200JE TNP10SC10R0FE TNP10SC120RFE
TNP10SHR250JE TNP10SC12R0FE TNP10SC150RFE
TNP10SHR330JE TNP10SC15R0FE TNP10SC200RFE
Series
TCR
Resistance
RoHS
H = 250ppm R500 = 0.500Ω compliant
A = 100ppm 1R00 = 1Ω
C = 50ppm 250R = 250Ω
1K00 = 1,000Ω
TNP10SAR500JE TNP10SC20R0FE TNP10SC330RFE
TNP10SA1R00FE TNP10SC25R0FE TNP10SC560RFE
TNP10SA1R50FE TNP10SC27R0FE TNP10SC1K00FE
TNP10SA2R00FE TNP10SC47R0FE TNP10SC10K0FE
TNP10SA3R00FE TNP10SC50R0FE
This product has been
25K5 = 25,500Ω
DISCONTINUED
aSSocꢂaTꢁd PaꢀTS
TNP10 resistors may be mounted with Ohmite
C Series (parts C126-XXX) heatsinks:
http://www.ohmite.com/cat/sink_c.pdf
rev 12/20-1
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
153
相关型号:
©2020 ICPDF网 联系我们和版权申明