D-GFC20206B-0 [OKAYA]
Display,;
| 型号： | D-GFC20206B-0 |
| 厂家： | 
Okaya Electric America, Inc. |
| 描述： | Display, |
| 文件： | 总19页 (文件大小：3217K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
OKAYA Electric America, Inc.
SPECIFICATIONS
CUSTOMER
SAMPLE CODE
(This Code will be changed while mass production)
MASS PRODUCTION CODE
D-GFC20206B-0 / RE10264ARF-001-H
Customer Approved
Date:
Sales Sign
QC Confirmed
Checked By
Designer
Approval For Specifications Only.
* This specification is subject to change without notice.
Approval For Specifications and Sample.
OKAYA Electric America, Inc.
503 Wall St. Valparaiso, IN 46383
Phone: 800-852-0122 Fax: 219-477-4856
(PS0405105)
NO.PT-A-005-4
LCD MODULE SPECIFICATION
CUSTOMER:
久 正 光 電
MODEL:
S-GFC20206B-0
VER.2
APPROVED
CHECKED
ORGANIZED
CUSTOMER APPROVED BY:
History of Version
Version
Contents
Page
Date
Note
1
NEW Version
02/05/31
SPEC
D-I102064AB-00
S-GFC20206B-0
→
2
S-GFC20206B-0
2/18
Contents
Page
1. Mechanical Specification & Diagram…………………………………………………. 4
2. Absolute Maximum Rating………………………………………………………………. 6
3. Electrical Characteristics…………………………………………………………………. 6
4. Optical Characteristics……………………………………………………………………. 7
5. Optical Definitions…………………………………………………………………………. 7
6. Interface Pin Function……………………………………………………………………. 9
7. Block Diagram……….………………………………………………………………………. 10
8. Specification of Quality Assurance……………………………………………………. 11
9. Standard Specifications for Reliability…………………………………….…………. 13
S-GFC20206B-0
3/18
1. Mechanical Specification & Diagram
1.1 Mechanical Specification
ITEM
STANDARD VALUE
UNIT
ADOTS
amm
amm
amm
amm
g
NUMBER OF DOTS
102 × 64
MODULE DIMENSION
EFFECTIVE DISPLAY AREA
DOT SIZE
34.0(W) × 35.0 (H) × 1.9 (T)
30.5 (W) × 24.0 (H)
0.25 (W) × 0.3 (H)
0.27 (W) × 0.32 (H)
TBD
DOT PITCH
APPROX. WEIGHT
LCD TYPE
FSTN ( Positive / Transflective )
1/65 Duty 1/9 Bias
6 O’clock
DRIVER METHOD
VIEWING DIRECTION
BACK LIGHT
------
DRIVER IC
ST7565S-G
S-GFC20206B-0
4/18
1.2 Mechanical Diagram
S-GFC20206B-0
5/18
2. Absolute Maximum Rating
ITEM
SYMBOL
MIN
-20
TYP
MAX
+70
UNIT
к
OPERATING TEMPEATURE
STORAGE TEMPERATURE
INPUT VOLTAGE
Top
Tst
VI
-
-
-
к
-30
+80
-0.3
VDD+0.3
V
SUPPLY VOLTAGE FOR LOGIC
SUPPLY VOLTAGE FOR LCD
SUPPLY VOLTAGE
VDD –VSS
VDD –V5
-3.3
-13
-
-
-1.8
V
V
+0.3
Be sure that you are grounded when hading LCM.
STATIC ELECTRICITY
3. Electrical Characteristics
ITEM
SYMBOL CONDITION
MIN.
TYP.
MAX.
UNIT
SUPPLY VOLTAGE
FOR LOGIC
Ta=25к
Ta=25к
VDD-VSS
-
3.0
-
V
SUPPLY VOLTAGE
FOR LCD
VDD-V5
(Vop)
-
10
-
V
Ta=25к
Ta=25к
INPUT HIGH VOL.
INPUT LOW VOL.
OUTPUT HIGH VOL.
VIH
VIL
0.8VDD
VSS
-
-
-
VDD
0.2VDD
VDD
V
V
V
VOH
IOH=-0.5mA
0.8VDD
OUTPUT LOW VOL.
SUPPLY CURRENT
VOL
IDD
IOL=0.5mA
VDD=3.0V
VSS
-
-
0.2VDD
-
V
TBD
mA
S-GFC20206B-0
6/18
4. Optical Characteristics
FSTN
CONDITIO
N
ITEM
SYMBOL
MIN.
TYP.
MAX.
UNIT
Ӱ
ӥ
CR
Tr
VIEW ANGLE (V)
VIEW ANGLE (H)
CONTRAST RATIO
RESPONSE TIME
RESPONSE TIME
CR 2
CR 2
-40
-40
A-
-
-
-
+40
+40
-
Deg.
Deg.
-
aTa=25к
Ta=25к
Ta=25к
5
200
200
400
400
ms
ms
Td
-
5. Optical Definitions
S-GFC20206B-0
7/18
S-GFC20206B-0
8/18
6. Interface Pin Function
NO
1
SYMBOL
NC
FUNCTION
NC
NC
2
NC
3
VDD
VSS
Shared with the MPU power supply terminal VCC.
This is a 0V terminal connected to the system GND.
4
5
6
SID
D7 serial data input terminal.(SID)
SOLE
D6 serves as the serial clock input.(SOLE)
This is connect to the least significant bit of the normal MPU address bus,
and it determines whether the data bits are data or a command.
RS = HIGH: Indicates that D0 to D7 are display data.
RS = LOW: Indicates that D0 to D7 are control data.
When RESETB is set to LOW, the settings are initialized.
The reset operation is performed by the RESETB signal level.
This is the chip select signal. When CS1B = LOW and CS2 = HIGH, then the
chip select becomes active, and data/command I/O is enabled.
7
RS
8
9
RESETB
CS1B
10
11
12
13
14
VSS
VSS
VSS
NC
This is a 0V terminal connected to the system GND.
This is a 0V terminal connected to the system GND.
This is a 0V terminal connected to the system GND.
NC
NC
NC
S-GFC20206B-0
9/18
7. Block Diagram
S-GFC20206B-0
10/18
8. Specification of Quality Assurance
1. Purpose
This standard for Quality Assurance should affirm the quality of LCD module products to
supply to purchaser by POWERTIP DISPLAY CORPORATION (Supplier).
2. Standard for Quality Test
2.1 Inspection:
Before delivering, the supplier should take the following tests, and affirm the quality of
product.
2.2 Electro-Optical Characteristics:
According to the individual specification to test the product.
2.3 Test of Appearance Characteristics:
According to the individual specification to test the product.
2.4 Test of Reliability Characteristics:
According to the definition of reliability on the specification for testing products.
2.5 Delivery Test:
Before delivering, the supplier should take the delivery test.
2.5.1 Test method: According to MIL-STD-105E, General Inspection Level
take
Ⅱ
a single time.
2.5.2 The defects classify of AQL as following:
Major defect: AQL=0.65
Minor defect: AQL=2.5
Total defects: AQL=2.5
3. Nonconforming Analysis & Deal With Manners
3.1 Nonconforming analysis:
3.1.1 Purchaser should supply the detail data of non-conforming sample and the
non-suitable state.
3.1.2 After accepting the detail data from purchaser, the analysis of nonconforming
should be finished in two weeks.
3.1.3 If supplier can not finish analysis on time, must announce purchaser before two
weeks.
3.2 Disposition of nonconforming:
3.2.1 If find any product defect of supplier during assembly time, supplier must chance
the good product for every defect after recognition.
3.2.2 Both supplier and customer should analyze the reason and discuss the
disposition of nonconforming when the reason of nonconforming is not sure.
S-GFC20206B-0
11/18
4. Agreement items
Both sides should discuss together when the following problems happen.
4.1 There is any problem of standard of quality assurance, and both sides think that must
be modifier.
4.2 There is any argument item which does not record in the standard of quality
assurance.
4.3 Any other special problem.
5. Standard of The Product Appearance Test
5.1 Manner of appearance test:
5.1.1 The test must be under 20W Ø 2 or 40W fluorescent light, and the distance of
view must be at 30 cm.
5.1.2 When test the model of Tran missive product must add the reflective plate.
5.1.3 The test direction is base on about around 45± of vertical line.
S-GFC20206B-0
12/18
9. Standard Specification for Reliability
1.Standard Specification for Reliability of Wide-Temperature COG
NO
Item
Description
The sample should be allowed to stand at 70
hours under driving condition.
High
1. temperature
operation
3
for 240(-0,+48)
for 240(-0,+48)
± ℃
The sample should be allowed to stand at -20
hours under driving condition.
3
± ℃
Low
temperature
operation
2.
The sample should be allowed to stand at 80
3
for 240(-0,+48)
± ℃
High
temperature
resistance
3.
hours under no-load condition, and then returning it to normal
temperature condition, and allowing it stand for 30 minutes.
The sample should be allowed to stand at -30
3
for 240(-0,+48)
± ℃
Low
temperature
resistance
hours under no-load condition, then returning it to normal
temperature condition, and allowing it stand for 24 hours.
4.
The sample should be allowed to stand at 40 3 , 90%RH MAX
± ℃
Moisture
5.
for 240(-0,+48) hours under no-load condition excluding
the polarize, then taking it out and drying it at normal temperature.
The sample should be allowed to stand the following 10
Cycles of operationΚ
resistance
Thermal shock
resistance
0
for 30 minutes normal temperature for 5 minutes
℃
→
+70 for 30 minutes normal temperature for 5 minutes,
6.
℃
→
as one cycle.
→
Human Body Model 2000 volt electrical discharge from a 100 pF
：
capacitor to the tested device in series with a 1500 ohm resistor.
Apply VDD & VSS to LCD module unit. Test for functionality no
missing lines after the discharge, but LCD module may reset.
ESD
(Electrostatic
Machine modelΚ200 volt electrical discharge from a 200 pF
capacitor to the tested device with no series resistance.
7.
Discharge)
Apply to VDD & VSS to LCD module unit without including hand phone.
Test for functionality no any missing lines after the discharge, but LCD
module can be reset if display off.
S-GFC20206B-0
13/18
2.Testing Conditions and Inspection Criteria
In order to do the final test the testing sample must be in room temperature for
24hours, to ensure stability.
NO
Item
Current
Consumption
Test Model
Inspection Criteria
The current must be under three times of
initiated test.
1.
Refer To Specification
The contrast must be large than half of
initiated test.
2.
3.
Contrast
Refer To Specification
Visual inspection
Appearance
Defect free.
3.Life Time
NO
1.
Item
Description
Life time
Functions, performance, appearance, etc. shall be free from remarkable
deterioration within 50,000 hours under ordinary operating and storage
conditions room temperature (25̈́ 10к), normal humidity (45 ̈́20нRH),
and in area not exposed to direct sun light.
2.
Life time
Functions, performance, appearance, etc. shall be free from remarkable
deterioration within 5,000 hours under ordinary operating and storage
conditions high temperature 70к, normal humidity(45̈́ 20%RH), and in
area not exposed to direct sun light.
NoteΚFrom our experience the life time of high humidity operation and high temperature operation
as above mentioned could be achieved.
S-GFC20206B-0
14/18
Standard of inspection:( Unit: mm)
NO
Item
Criterion
1.1 Missing vertical, horizontal segment, segment contrast defect.
1.2 Missing character , dot or icon.
1.3 Display malfunction.
AQL
0.65
Electrical
Testing
1.4 No function or no display.
1.
1.5 Current consumption exceeds product specifications.
1.6 LCD viewing angle defect.
1.7 Mixed product types.
1.8 Contrast defect.
2.1 Round typeΚ As following drawing
ӿ= ꢀ x + y ꢁ / 2
SIZE
Acceptable Q’TY
Accept no dense
2
ӿЉ0.10
X
2.5
0.10ІӿЉ0.20
Y
0.20ІӿЉ0.25
0.25Іӿ
1
0
LCD black
spots, white
spots,
2.
2.2 Line typeΚ(As following drawing)
contamination
Length
Width
Acceptable Q’TY
Accept no dense
W
WЉ0.02
0.02ІWЉ0.03
0.03ІWЉ0.05
0.05ІW
-----
LЉ3.0
LЉ2.5
----
2.5
L
3
As round type
S-GFC20206B-0
15/18
NO
Item
Criterion
AQL
2.5
Size ӿ
ӿ= ꢀ x + y ꢁ / 2
Acceptable Q’TY
ӿЉ0.20
Accept no dense
X
0.20ІӿЉ0.50
0.50ІӿЉ1.00
1.00Іӿ
3
2
0
3
Polarize
bubbles
3.
Y
Total Q’TY
4.
Scratches Follow NO.2 LCD black spots, white spots, contamination
SymbolsΚ
xΚChip length
yΚChip width
zΚChip thickness
tΚGlass thickness
aΚLCD side length
LΚElectrode pad length
5.1 General glass crackΚ
5.1.1 Corner crackΚ
z
y
x
2.5
zΚ
ZЉ1/2t
y
x
xЉ1/8a
xЉ1/8a
Not over viewing area
1/2tІZЉ2t
Not exceed 1/2 SP width
~If there are 2 or more chips, x is the total length of each
chip.
5.
Glass Crack
5.1.2 Crack on panel surface and crack between panelsΚ
̋ʳ
̋ʳ
̆̃ʳ
̌ʳ
̍ʳ
2.5
x
̍ʳ
y
̇ʳ
z
̌ʳ
z
y
x
ZЉ1/2t
1/2tІZЉ2t
xЉ1/8a
xЉ1/8a
Not over viewing area
Not exceed 1/2 SP width
S-GFC20206B-0
16/18
NO
Item
Criterion
AQL
5.2 Protrusion over terminalΚ
5.2.1 Crack on electrode padΚ
ϡTop of the glassΚ
ϡ Bottom of the glassΚ
L
y
z
y
̍ʳ
x
x
2.5
y
x
z
yЉ0.5 mm
xЉ1/8a
ѽІӐЉt
top of the glass
back of the glass
Not over viewing
area
xЉ1/8a
ѽІӐЉt
5.2.2 Non-conductive portionΚ
˟ʳ
˟ʳ
̊ʳ
̍ʳ
z
5.
Glass Crack
̍ʳ
y
̌ʳ
x
̋ʳ
2.5
KIND
y
x
z
yЉL
xЉ1/8a
ӐЉt
General
Not touch the ITO
terminal
yЉw
ӐЉt
COG
ϡ the alignment mark must not be damaged.
5.2.3 Glass chip remain
2.5
x
L
y
yΚ width
yЉ 1/3L
xΚlength
x Љ a
6.1 Illumination source flickers when lit.
0.65
2.5
6.2 Spots or scratches that appear when lit must be judged .
using LCD spot, lines and contamination standards.
6.3 Backlight doesn’t light or color is wrong.
Backlight
elements
6.
0.65
S-GFC20206B-0
17/18
NO
Item
Criterion
AQL
2.5
7.1 No oxidation, contamination, curves or, bends on interface pin
(OLB) of TCP.
7.2 No cracks on interface pin (OLB) of TCP.
0.65
2.5
2.5
2.5
7.3 No contamination, solder residue or solder balls on product.
7.4 The IC on the TCP may not be damaged.
7.5 The uppermost edge of the protective strip on the interface pin
must be present or look as if it cause the interface pin to sever.
7.6 The residual rosin or tin oil of soldering (component or chip
component) is not burned into brown or black color.
7.7 Sealant on top of the ITO circuit has not hardened
7.8 Pin type must match type in specification sheet.
7.9 LCD pin loose or missing pins.
2.5
2.5
0.65
0.65
0.65
7.10 Product packaging must the same as specified on packaging
specification sheet.
General
appearance
7.11 Product dimension and structure must conform to product
specification sheet .
0.65
7.
S-GFC20206B-0
18/18
相关型号：
D-MAJORAUDIODECODERDOCUMENTATION
D-MAJOR AUDIO DECODER DOCUMENTATION D-Major Audio Decoder Product Brochure (pdf. 472 Kb. 5-BR1-8.1-0502)
ETC
D-NXT-1W
1W,FIXEDINPUT, ISOLATED & UNREGULATEDTWIN OUTPUT ULTRAMINIATURESMD PACKAGE DC-DC CONVERTER
MICRODC
D-NXT-2W
2W, FIXED INPUT, ISOLATED & UNREGULATEDTWINOUTPUTULTRAMINIATURESMD PACKAGE DC-DCCONVERTER
MICRODC
©2020 ICPDF网 联系我们和版权申明