OAT1041L-V5-D-10-L [OKI]
Transceiver, 1290nm Min, 1330nm Max, 10700Mbps(Tx), 10700Mbps(Rx), LC Connector;型号: | OAT1041L-V5-D-10-L |
厂家: | OKI ELECTRONIC COMPONETS |
描述: | Transceiver, 1290nm Min, 1330nm Max, 10700Mbps(Tx), 10700Mbps(Rx), LC Connector 通信 光纤 |
文件: | 总13页 (文件大小:220K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
OKI Confidential
Rev. DRAFT 0.5
Document Number: QPS-0302-020
OAT1041x-V5-z-yy(for 12km)
Revision:
DRAFT 0.5
Oct.17.2002
T.ITOU
DATE:
OC-192/STM-64 SERDES Transceiver Module
Author:
Project Manager:
T. ITOU
Modification History
Rev.
Date
Originator
T.Itou
T.Itou
T.Itou
T.Itou
Comment
DRAFT0.1
DRAFT0.2
DRAFT0.3
DRAFT0.4
DRAFT0.4
Aug.16.2002
Sep.05.2002
Sep.25.2002
Oct.2.2002
Oct.17.2002
Revision of Absolute maximum of VEE
Additional of I2C diagnostic monitor
Change of Distance
T.Itou
Features ;
• 10G SFF Transceiver
• Jitter filter built-in (OAT1041x-V5-C-yy, Multi-rate
type removes)
• SONET/SDH 9.953Gbps operation
SR-1/I64.1 @ OAT1041x-V5-A-yy
• Support 10.3Gbps(10GbE), 10.66Gbps(FEC)
and 10.7Gbps(OTN) rate
• Wavelength : 1310nm band
• Transmission Distance :
• TxREFCLK frequency of 622MHz is standard.
(OAT1041x-V5-C-yy, Multi-rate type removes)
• Compact size: 50.8 x 76.2 x 11.5 (mm)
• Supply voltage : +3.3V , +1.8V and -5.2V
• Low power consumption: <4.8W max.(3.8W typ.)
• I2C compatible bus for simple status data monitor
12km(40ps/nm) @OAT1041x-V5-A-yy
• Dispersion Penalty : <1dB
• 16-bit parallel 622.08Mbps(equivalent FEC rate)
LVDS data interface
• SERDES Timing compliant with OIF1999.102.8
SFI-4 interface
Application ;
• Metro network SONET/SDH system
• 10 Gigabit Ethernet system
• Forward Error Correction system
• Optical Transport Network (OTN) System
1
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
1.Block diagram
LsPOWMON
LsENABLE
LsBIASMON
LsPOWALM
LsBIASALM
APC
16
TxDIN[0:15]P/N
TxPICLKP/N
TxREFCLKP/N
TxREFSEL
OC-192
Optical Output
MUX
with CMU
TX E-O
Driver
TxRESET
TxFIFORES
TxRATESEL0/1
TxPCLKP/N
TxMCLKP/N
TxLOCKERR
TxFIFOERR
I2CCLOCK
I2CCLOCK
Serial
Monitor
16
RxDOUT[0:15]P/N
RxPOCLKP/N
RxMCLKP/N
RxREFCLKP/N
RxREFSEL
OC-192
Optical Input
CDR
with DEMUX
RX O-E
RxLCKREF
RxRATESEL0/1
RxPOWMON
RxPOWALM
Opt Mon
RxLOCKERR
RxMUTEPOCLK
RxMUTEMCLK
RxMUTEDOUT
+3.3V +1.8V -5.2V GND
TxREFSEL,TxRATESEL0/1 are available for multi-rate type, OAT1041x-V5-C-yy.
Figure 1 Block diagram
2
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
2.Absolute Maximum Ratings
Stresses in excess of the Absolute Maximum Ratings can cause permanent damage to the device.
Table 2 Absolute Maximum Ratings
Parameter
Supply Voltage
Symbol
VDD1
VDD2
VEE
Min.
-0.5
-0.5
-6.0
0
Max.
3.6
2.0
+0.5
2.7
3.6
50
Units
V
V
V
LVDS input pin
LVTTL input pin
V
0
V
LVTTL output sink current
LVTTL output source current
Optical Input Power
Tension of fiber
mA
mA
dBm
g
-50
3
Pin_max
Tstg
500
Fiber Bend Radius
Storage Temperature
30
-40
mm
degC
85
3.Operating Environment
Electrical and optical characteristics below are defined under this operating environment, unless otherwise specified.
Table 3 Operating Environment
Parameter
Supply Voltage
Symbol
VDD1
VDD2
VEE
Min.
3.13
1.71
-4.94
Typ.
Max.
3.46
1.89
-5.46
0.4
Units
V
3.3
1.8
-5.2
Supply Current
IDD1
IDD2
IEE
A
1.2
0.5
Case Temperature
Power consumption
Tc
0
70
degC
W
3.8
4.8
3
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
4.Specifications
4-1 Optical interface specifications
Table 4.1 Optical interface specifications
Parts Number
Parameter
1041x-V5-A-yy
Symbol
Min Max
Units Note
9.95328
Gbit/s
Bit rate
Transmitter
Optical output power
Optical waveform
Po
-6
-1
dBm
Figure 4.1
OC-192/STM-64
G.693
Unamplified Mask standard
Center wavelength
Extinction ratio
Spectral maximum –20dB Width
Side mode suppression ratio
1290
6.0
1330
1.0
nm
dB
nm
dB
λc
Er
∆λ20
SMSR
30
Receiver
Minimum sensitivity
Minimum overload
Input wavelength
Rx Return loss
Jitter performance
Jitter Generation
Pin
Pin
λc_rx
-14
dBm
dBm
nm
BER@1x10-12
-1
1280
27
1580
dB
0.1
UIp-p Bandpass filter;
50k to 80MHz
Figure 4.2,4.3
Jitter Tolerance and Transfer
Optical path
Compliant with GR-253
Dispersion
Optical Path Penalty
DLrmax
40
1
ps/nm
dB
Condition; Case temperature: 0 to 70degC, NRZ,PRBS231-1, Mark ratio: 1/2,
Supply voltage:+3.3V,+1.8V,-5.2V each +/-5%
4
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
OKI Confidential
Rev. DRAFT 0.5
1.4
Logic 1
Logic 0
1
0.75
0.25
0
0.2
Comply GR693
-0.25
0
1
Time(UI)
Figure 4.1 Eye pattern mask
15
1.5
Acceptable Range
slope=-20dB/decade
slope=-20dB/decade
0.15
10
2k
20k 400k
4M
Jitter Frequency [Hz]
Figure 4.2 Jitter Tolerance mask
0.1
slope=-20dB/decade
Acceptable Range
120k
Frequency [Hz]
Figure 4.3 Jitter Transfer mask
5
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
OKI Confidential
Rev. DRAFT 0.5
4-2 Electrical Interface
Table 4.2.1 Reference clock characteristics
Symbol
Parameter
Min.
Typ
Max.
Units
Interface
Notes
Tx Reference Clock
TxREFCLKP/Na
Frequency
622.08
155.52
644.53
161.13
666.51
166.63
669.32
167.33
MHz
AC
OC-192/STM-64
Coupled
(Internally
has
10GbE(10.3Gbps)
FEC
capacitor)
OTN
155.52/161.13/166.63/167.33
or
Multi-rate type.
622.08/644.53/666.51/669.32
Frequency
tolelance
-20
-100
40
+20
+100
60
ppm
OC-192/STM-64
10GbE(10.3Gbps)
Duty cycle
Input levels
%
mV p-p
400
900
Single-ended
swing
voltage
Rx Reference Clock
RxREFCLKP/N
Frequency
155.52 or 622.08
161.13 or 644.53
166.63 or 666.51
167.33 or 669.32
MHz
AC
OC-192/STM-64
10GbE(10.3Gbps)
Coupled
(Internally FEC
has
OTN
Multi-rate type.
capacitor)
155.52/161.13/166.63/167.33
or
622.08/644.53/666.51/669.32
Frequency
tolelance
Duty cycle
Input levels
-20
-100
40
+20
+100
60
ppm
OC-192/STM-64
10GbE(10.3Gbps)
%
mV p-p
400
900
Single-ended
swing
voltage
a. 600MHz operation of TxREFCLK is a standard. Moreover, we can prepare TxREFCLK by 150MHz.
And only TxREFCLK frequency of multi-rate type, OAT1041x-V5-C-yy, is available to select 150MHz or 600MHz.
6
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
Table 4.2.2 Transmitter/Receiver Parallel Data/Clock Interface
Function I/O Interface Note
Transmitter
TxDin[0:15]P/N
Transmitter 16-bit parallel Date Input
I
I
LVDS
LVDS
TxDin0:LSB, TxDin15:MSB
TxPICLKP/N
Transmitter Source synchronous Parallel
Input Clock
Transmitter Counter Clock
TxPCLKP/N
Receiver
O
LVDS
RxDout[0:15]P/N Receiver 16-bit parallel Date Output
O
O
LVDS
LVDS
RxDout0:LSB, RxDout15:MSB
RxPOCLKP/N
Receiver Source synchronous Parallel
Output Clock
Table 4.2.3 Transmitter/Receiver Parallel Data/Clock Timing
Parameter
Symbol
Min.
Max.
Units Note
Transmitter Data/CLK Input Timing
TxPICLK
Duty cycle
Rise time
Fall time
setup time
hold time
Tw/To
40
60
300
300
%
Tr
ps
ps
ps
ps
20 – 80%
80 – 20%
Tf
TxDin
Ts
300
300
Th
To
Tw
TxPICLKP
TxDin[0:15]P/N
Ts
Th
Receiver Data/CLK Output Timing
RxPOCLK
Duty cycle
Tw/To
45
55
%
ps
ps
ps
ps
Rise time
Tr
250
250
200
200
20 – 80%
80 – 20%
Fall time
Data/Clock skew
Tf
Tcq_min,
Tcq_max
RxDout
To
Tw
RxPOCLKP
Tcq_max
RxDout[0:15]P/N
Tcq_min
7
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
Table 4.2.4 Monitor Clock
Interface
Function
I/O
Note
Transmitter
TxMCLKP/N
Receiver
RxMCLKP/N
Transmitter monitor clock
Receiver monitor clock
O
LVDS
LVDS
f=TxREFCLK frequency
f=RxREFCLK frequency
O
Table 4.2.5 Transmitter Data Rate select
TxRATESEL0
TxRATESEL1
Function
Note
Serial Data rate
9.95328Gbps
10.3125Gbps
Parallel Data rate
H
L
H
L
H
L
L
H
622.08Mbps
644.54Mbps
LVTTL interface
Internal 100 k pull up to
Ω
VDD1
10.664 to 10.709Gbps 666.51 to 669.32Mbps
Table 4.2.6 Receiver Data Rate select
RxRATESEL0
RxRATESEL1
Function
Note
Serial Data rate
9.95328Gbps
10.3125Gbps
Parallel Data rate
622.08Mbps
H
L
H
L
H
L
L
H
LVTTL interface
644.54Mbps
Internal 100kΩ pull up to
VDD1
10.664 to 10.709Gbps 666.51 to 669.32Mbps
Table 4.2.7 Digital control signals
Symbol
Function
Interface
Description
Note
Transmitter
TxREFSELa
Selects Tx 155MHz or LVTTL
622MHz Reference Clock
L
H
L
Selects 155MHz
Selects 622MHz
MUX reset
Normal operation
MUX FIFO reset
Normal operation
Normal operation
Laser disabled
Internal 100 kΩ pull up to
VDD1
TxRESET
Asynchronous
system LVTTL
Internal 100 kΩ pull up to
reset
H
L
VDD1
TxFIFORES
LsENABLE
MUX FIFO reset
LVTTL
Internal 100 kΩ pull up to
H
L
H
VDD1
Enable/Disables Laser
LVTTL
LVTTL
Internal 100 kΩ pull
down to GND
Receiver
RxREFSEL
Selects Rx 155MHz or
622MHz Reference Clock
L
H
L
H
L
H
L
H
L
H
Selects 155/161/166/167MHz
Selects 622/644/666/669MHz
Locks to RxREFCLK
Normal operation
Mutes the RxDOUT[0:15]
Normal operation
Mutes the RxPOCLK
Normal operation
Mutes the RxMCLK
Normal operation
Internal 100 kΩ pull
down to GND
RxLCKREF
Locks RxPOCLK to LVTTL
Internal 100 kΩ pull up to
RxREFCLK
VDD1
RxMUTEDOUT
Mutes the RxDOUT[0:15] LVTTL
to logical zero
Internal 100 kΩ pull up to
VDD1
RxMUTEPOCLK Mutes the RxPOCLK to LVTTL
Internal 100 kΩ pull up to
logical zero
Mutes the RxMCLK to LVTTL
logical zero
VDD1
RxMUTEMCLK
Internal 100 kΩ pull up to
VDD1
a. TxREFSEL is available for multi-rate type, OAT1041x-V5-C-yy.
8
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
Table 4.2.8 Alarms
Interface Description
Symbol
Function
Note
Transmitter
TxLOCKERR
Loss of TxPLL lock
MUX FIFO error
Laser bias out of range
LVTTL
LVTTL
LVTTL
L
H
L
H
L
H
Alarm active
Normal operation
Alarm active
TxFIFOERR
LsBIASALM
Normal operation
Alarm active
Normal operation
Ib> 120mA (typ.)
Output power degrades 3dB below
the Po (BOL)
LsPOWALM
Laser output power out of LVTTL
range
L
Alarm active
H
Normal operation
Receiver
RxLOCKERR
Loss of RxPLL lock
LVTTL
L
H
L
H
Alarm active
Normal operation
Alarm active
RxPOWALM
Loss of receiver average LVTTL
power alarm
Pin<-19dBm (typ.)
Normal operation
Table 4.2.9 Monitor signals
Symbol
Function
Min.
Typ.
Max.
Unit
Transmitter
LsPOWMON
LsBIASMON
Receiver
Normalized Laser power monitor voltage BOL
Laser bias monitor voltage slope
0.44
17.8
0.5
20
0.56
22.5
V
mV/mA
RxPOWMON
Input optical power monitor voltage slope
0.8
1.26
V/mW
Table 4.2.10 LVDS interface
Symbol
Min
100
850
800
80
250
1100
Typ
Max
Unit
Single-ended Input Swing
Common mode input voltage
Input voltage range
Input Differential impedance
Single-ended Output Swing
Common mode output voltage
mVp-p
2200
2400
120
400
1300
mV
mV
100
Ω
mVp-p
mV
1200
Table 4.2.11 LVTTL interface
Symbol
VIH
Min
2.0
Typ
Max
VDD1
Unit
V
Input High voltage
Input Low voltage
Output High voltage
Output Low voltage
VIL
GND
2.4
0.6
V
VDD1
VOH
VOL
V
V
GND
0.4
9
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
5. Mechanical Information
Top view
OPT IN
OPT OUT
Bottom view
The back side of the transceiver is recess area without mechanical bolt holes.
Users can use this domain as trace area on users PCB.
Note: Pigtail fiber length have to be specified between OKI and Users.
Figure 5 Package Outline(Units:mm)
Table 5 Connector
SC/PC type standard
Optical
Other connectors are available@FC,LC,MU
300pin BERG MegArray@84501-10X
Electrical
10
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
6. Connector Pin Assignment
Table 6 Pin Assignments
K
J
H
G
RxDout12P
RxDout12N
GND
F
E
D
C
RxDout4P
RxDout4N
GND
B
A
RxDout0P
RxDout0N
GND
NUC
NUC
NUC
NUC
GND
GND
+1.8V
+1.8V
RxDout8P
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
GND
GND
NUC
GND
GND
1
RxDout8N
2
RxRATESEL0 RxRATESEL1 NUC
RxPOWMON GND
3
+3.3V
+3.3V
NUC
NUC
NUC
NUC
NUC
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
RxDout13P
RxDout13N
GND
+3.3V
+3.3V
RxDout9P
RxDout9N
RxDout5P
RxDout5N
GND
RxDout1P
RxDout1N
4
5
RxPOWALM GND
RxMUTE Dout GND
6
+3.3V
+3.3V
RxDout14P
RxDout14N
GND
+3.3V
+3.3V
NUC
RxDout10P
RxDout6P
RxDout6N
GND
GND
RxDout2P
7
RxDout10N
GND
GND
RxDout2N
GND
8
RxMUTEPOCLK NUC
RxLCKREF
GND
9
-5.2V
-5.2V
NUC
NUC
RxDout15P
RxDout15N
GND
-5.2V
RxDout11P
RxDout11N
GND
RxDout7P
RxDout7N
GND
RxDout3P
RxDout3N
GND
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
-5.2V
GND
RxMUTEMCLK NUC
NUC
NUC
-5.2V
NUC
NUC
NUC
NUC
NUC
NUC
NUC
NUC
NUC
-5.2V
RxPOCLKP
RxPOCLKN
GND
RxMCLKP
RxMCLKN
GND
GND
RxREFCLKP
RxREFCLKN
-5.2V
NUC
-5.2V
GND
I2CCLOCK
NUC
GND
RxREFSEL
+1.8V
+1.8V
RxLOCKERR GND
TxDin0P
TxDin12P
TxDin12N
GND
TxDin8P
TxDin8N
TxDin4P
TxDin4N
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
TxDin0N
GND
I2CDATA
+3.3V
LsBIASMON GND
LsPOWMON GND
TxDin13P
TxDin13N
GND
+3.3V
+3.3V
TxDin9P
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
TxDin5P
TxDin1P
TxDin1N
GND
+3.3V
TxDin9N
GND
TxDin5N
GND
TxRATESEL0 TxRATESEL1 NUC
LsENABLE
+3.3V
+3.3V
+3.3V
NUC
NUC
NUC
NUC
NUC
NUC
NUC
NUC
GND
GND
NUC
GND
GND
NUC
GND
GND
NUC
TxDin14P
TxDin14N
GND
TxDin10P
TxDin10N
TxDin6P
TxDin6N
GND
TxDin2P
TxDin2N
GND
+3.3V
TxRESET
-5.2V
LsBIASALM GND
TxDin15P
TxDin15N
GND
-5.2V
-5.2V
TxDin11P
TxDin7P
TxDin7N
GND
TxDin3P
TxDin3N
GND
-5.2V
TxDin11N
GND
TxFIFORES
-5.2V
NUC
TxPICLKP
TxPICLKN
GND
-5.2V
TxPCLKP
TxPCLKN
GND
TxMCLKP
TxMCLKN
TxREFCLKP
TxREFCLKN
-5.2V
-5.2V
TxFIFOERR NUC
TxREFSEL
LsPOWALM GND
TxLOCKERR GND
NUC: No User Connect
Italics: TxREFSEL is available for multi-rate type, OAT1041x-V5-C-yy.
11
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
7. I2C diagnostic monitor (Optional function)
Memory access to the OAT1041 is through the I2C interface.The slave address defaults to A2h.The memory within
the OAT1041 is 128 bytes.The following tables detail the memory contents. All conversions are updated every 13ms
(nominal) or 20ms (max) in rotation.
Table 7 memory map
Table
Address
00h-7Fh (128bytes)
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
00h
…
Reserved
…
58h
60h
68h
70h
78h
−
−
−
−
LsBias MSB LsBias LSB LsPow MSB LsPow LSB
RxPow MSB RxPow LSB
−
−
−
−
−
−
−
−
−
−
−
−
−
−
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Laser Bias Current Monitor : LsBias MSB(64h), LsBias LSB(65h)
These bytes contain the MSB (64h) and the LSB (65h) of the measured the laser bias current. This Reads as an
signed 16-bit quantity at 19.073uA LSB,with a maximum range of 125mA.The lower four bits should be ignored.
Normalized Laser Power Monitor : LsPow MSB(66h), LsPow LSB(67h)
These bytes contain the MSB (66h) and the LSB (67h) of the measured the normalized laser output power. This
Reads as an signed 16-bit quantity at 0.000038147 LSB,with a maximum range of 2.5.The Normalized Laser Power
Monitor (BOL) is typ. 0.5.The lower four bits should be ignored.
Received Average Optical Power Monitor : RxPow MSB(68h), RxPow LSB(69h)
These bytes contain the MSB (66h) and the LSB (67h) of the measured the average received optical power. This
Reads as an signed 16-bit quantity at 38.147uW LSB,with a maximum range of 2.5mW.The lower four bits should be
ignored.
12
OKI Electric Industry Co., Ltd Optical Components Company
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
Rev. DRAFT 0.5
OKI Confidential
8. Precautions for handling
The circuits of these modules operate at very small signal. In order to avoid the degradation of the optical
sensitivity due to external noise, the bottom pattern of these modules on the PCB should be ground pattern with low
impedance.
Do not mount/pattern device/circuits which generate high frequency noise close to the module.
In order to operate the module stable against the power noise, install the power supply noise reduction circuits.
The impedance between the power and ground pattern of the power circuit should be as low as possible. The elements
around the module should be mounted close to the pins of the module.
If an optical power exceeding the absolute maximum ratings is fed to the module, the optical receiver may be damaged.
Set the optical input power appropriately when in use of these modules.
9. Laser Safety
All version of transceiver are Class 1 Laser products FDA complies with 21 CFR 1040.10 and 1040.11 requirements.
Also, all versions are Class 1 Laser products pre IEC 825-1.
10. Ordering Information
OAT1041x-V5-z-yy -[ ]
Note: In z = A, B, D, E, “ -[ ] ” is added when 150MHz is specified to be TxREFCLK frequency.
Table 9 Ordering Information
x
z
yy
-[ ]
Optical connector
Bit rate(Gbps)
Fiber length
TxREFCLK frequency
S
F
SC
FC
LC
MU
A
B
C
D
E
9.95
10 1m
blank
-L
600MHz
150MHz
10.3
05 0.5m
L
9.95/10.3/10.6/10.7
M
10.7
10.6
13
OKI Electric Industry Co., Ltd Optical Components Company
相关型号:
OAT1041L-V5-E-05-L
Transceiver, 1290nm Min, 1330nm Max, 10600Mbps(Tx), 10600Mbps(Rx), LC Connector
OKI
OAT1041L-V5-E-10-L
Transceiver, 1290nm Min, 1330nm Max, 10600Mbps(Tx), 10600Mbps(Rx), LC Connector
OKI
OAT1041M-V4-C-10
Transceiver, 1290nm Min, 1330nm Max, 10700Mbps(Tx), 10700Mbps(Rx), MU Connector
OKI
OAT1041M-V4-D-05
Transceiver, 1290nm Min, 1330nm Max, 10700Mbps(Tx), 10700Mbps(Rx), MU Connector
OKI
OAT1041M-V4-D-10
Transceiver, 1290nm Min, 1330nm Max, 10700Mbps(Tx), 10700Mbps(Rx), MU Connector
OKI
OAT1041M-V5-A-05-L
Transceiver, 1290nm Min, 1330nm Max, 9950Mbps(Tx), 9950Mbps(Rx), MU Connector
OKI
OAT1041M-V5-B-05-L
Transceiver, 1290nm Min, 1330nm Max, 10300Mbps(Tx), 10300Mbps(Rx), MU Connector
OKI
OAT1041M-V5-B-10-L
Transceiver, 1290nm Min, 1330nm Max, 10300Mbps(Tx), 10300Mbps(Rx), MU Connector
OKI
OAT1041M-V5-C-10
Transceiver, 1290nm Min, 1330nm Max, 10700Mbps(Tx), 10700Mbps(Rx), MU Connector
OKI
OAT1041M-V5-D-05-L
Transceiver, 1290nm Min, 1330nm Max, 10700Mbps(Tx), 10700Mbps(Rx), MU Connector
OKI
©2020 ICPDF网 联系我们和版权申明