OAT1042F-V1-A-05 [OKI]

Transceiver, 1290nm Min, 1330nm Max, 9950Mbps(Tx), 9950Mbps(Rx), FC Connector;
OAT1042F-V1-A-05
型号: OAT1042F-V1-A-05
厂家: OKI ELECTRONIC COMPONETS    OKI ELECTRONIC COMPONETS
描述:

Transceiver, 1290nm Min, 1330nm Max, 9950Mbps(Tx), 9950Mbps(Rx), FC Connector

通信 光纤
文件: 总5页 (文件大小:319K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
FEDFOAT1042X-V1-01  
OKI Electronic Components  
Issue Data: Feb. 4, 2002  
OAT1042x-V1-z-yy  
OC192/STM -64 Optical Transceiver Module  
APPLICATION  
· OC-192 and STM-64 SERDES Transceiver Module  
FEATURES  
· Transmission Distance 12km  
· Wavelength 1310nm  
· 1:16 DeMUX with LVDS differential 622Mbps data outputs  
· 16:1 MUX with LVDS differential 622Mbps data inputs  
· TX/RX Loss of Lock  
· Compact size  
· Supply voltage; +3.3V , +5V and -5.2V  
SPECIFICATION  
·
Optical interface specifications  
Parts Number  
Parameter  
OAT1042x-V1-z-yy  
For 12km  
Units  
Transmitter module  
Pout  
l c  
-4 to 0  
1290 to 1330  
dBm  
nm  
Optical output waveform  
Extinction ratio  
ITU-T G.691 STM-64 Unamplified Mask standard  
8.2  
1.0  
dB  
nm  
Dl  
20  
SMSR  
30  
dB  
Jitter Generation  
Receiver Module  
Minimum sensitivity  
Minimum overload  
l c_rx  
Compliant with GR-253  
-12  
0
1290 ~ 1600  
dBm  
dBm  
nm  
Rx Return loss  
Jitter Generation, Tolerance  
and Transfer  
27  
dB  
Compliant with GR-253  
Optical path  
40  
ps/nm  
DLRmax  
System Optical return loss  
Optical Path Penalty  
24  
1
dB  
dB  
1/5  
FEDFOAT1042X-V1-01  
OKI Semiconductor  
OAT1042x-V1-z-yy  
· Power Supply  
Parameter  
Supply Voltage  
Symbol  
Vdd  
Vcc  
Min.  
3.13  
4.75  
-4.94  
Typ.  
3.3  
5
-5.2  
8
Max.  
3.47  
5.25  
-5.45  
14  
Units  
V
V
V
W
Imax  
2A  
0.8 A  
1.8A  
Vee  
Power consumption  
· Operating Temperature(Case temperature)  
0 to 65 degC  
· Dimensions(without heat sink)  
Dimensions  
88.9  
Units  
mm  
Width  
Length  
Height  
114.3  
13  
· Connector  
Optical  
Electrical  
Select SC / FC / LC / MU  
300pin BERG MegArray@84502-10X  
2/5  
FEDFOAT1042X-V1-01  
OKI Semiconductor  
OAT1042x-V1-z-yy  
BLOCK DIAGRAM  
LsTEMPMON  
Temp Control  
Power Control  
LsTEMPALM  
LsPOWMON  
LsBIASMON  
LsBIASALM  
LsENABLE  
OC192 Optical  
Output  
TxDin0-15P/N  
TxPICLKP/N  
TxPCLKP/N  
TX E-O  
MUX  
with CMU  
Driver  
TxRESET  
TxLOCKERR  
TxMCLKP/N  
TxREFSEL  
TxLINETIMSEL  
TxREFCLKP/N  
RxPOWALM  
ALM  
Optional function  
Source and  
Line Timing modes  
RxLOCKERR  
RxPOWMON  
RxPOCLKP/N  
RxDout0-15P/N  
OC192 Optical  
Input  
CDR  
with DEMUX  
Post AMP  
RX O-E  
I2CDATA  
RxREFCLKP/N  
EEPROM  
I2CCLOCK  
RxLCKREF  
RxRESET  
Optional function  
Manufacturing Infomation stored  
uP  
RxMCLKP/N  
ORDERING INFORMATION  
OAT1042x-V1-z-yy  
x
z
Bitrate(Gbps)  
9.95  
yy  
Fiber Length  
1m  
optical connector  
S
F
L
SC  
FC  
LC  
MU  
A
B
C
D
10  
05  
10.3  
9.95/10.3/10.7  
10.7  
0.5m  
M
3/5  
FEDFOAT1042X-V1-01  
OKI Semiconductor  
OAT1042x-V1-z-yy  
PACKAGE OUTLINE  
(Unit: mm)  
OPT IN  
OPT OUT  
4/5  
FEDFOAT1042X-V1-01  
OKI Semiconductor  
OAT1042x-V1-z-yy  
NOTICE  
1. The information contained herein can change without notice owing to product and/or technical improvements.  
Before using the product, please make sure that the information being referred to is up-to-date.  
2. The outline of action and examples for application circuits described herein have been chosen as an  
explanation for the standard action and performance of the product. When planning to use the product, please  
ensure that the external conditions are reflected in the actual circuit, assembly, and program designs.  
3. When designing your product, please use our product below the specified maximum ratings and within the  
specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating  
temperature.  
4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation  
resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or  
unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified  
maximum ratings or operation outside the specified operating range.  
5. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is  
granted by us in connection with the use of the product and/orthe information and drawings contained herein.  
No responsibility is assumed by us for any infringement of a third party’s right which may result from the use  
thereof.  
6. The products listed in this document are intended for use in general electronics equipment for commercial  
applications (e.g., office automation, communication equipment, measurement equipment, consumer  
electronics, etc.). These products are not authorized for use in any system or application that requires special  
or enhanced quality and reliability characteristics nor in any system or application where the failure of such  
system or application may result in the loss or damage of property, or death or injury to humans.  
Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace  
equipment, nuclear power control, medical equipment, and life-support systems.  
7. Certain products in this document may need government approval before they can be exported to particular  
countries. The purchaser assumes the responsibility of determining the legality of export of these products  
and will take appropriate and necessary steps at their own expense for these.  
8. No part of the contents contained herein may be reprinted or reproduced without our prior permission.  
9.  
Qualification and Reliability  
To help ensure high product reliability and customer satisfaction, OKI is committed to an intensive quality  
program that starts in the design phase and proceeds through the manufacturing process.  
Optical transceiver modules are qualified to OKI internal standards using MIL-STD-883 test methods and  
procedures and using sample techniques consistent with Telcordia requirements.  
This qualification program fully meets the intent of Telcordia reliability practices GR-468-CORE.  
10. Laser Safety  
All version of transceiver are Class 1 Laser products FDA complies with 21 CFR 1040.10 and 1040.11  
requirements.  
Also, all versions are Class 1 Laser products pre IEC 825-1.  
Copyright 2002 Oki Electric Industry Co., Ltd.  
5/5  

相关型号:

OAT1042F-V1-A-10

Transceiver, 1290nm Min, 1330nm Max, 9950Mbps(Tx), 9950Mbps(Rx), FC Connector
OKI

OAT1042F-V1-B-05

Transceiver, 1290nm Min, 1330nm Max, 10300Mbps(Tx), 10300Mbps(Rx), FC Connector
OKI

OAT1042F-V1-C-05

Transceiver, 1290nm Min, 1330nm Max, 10700Mbps(Tx), 10700Mbps(Rx), FC Connector
OKI

OAT1042F-V1-D-05

Transceiver
OKI

OAT1042L-V1-A-05

Transceiver
OKI

OAT1042L-V1-A-10

Transceiver, 1290nm Min, 1330nm Max, 9950Mbps(Tx), 9950Mbps(Rx), LC Connector
OKI

OAT1042L-V1-B-05

Transceiver, 1290nm Min, 1330nm Max, 10300Mbps(Tx), 10300Mbps(Rx), LC Connector
OKI

OAT1042L-V1-C-10

Transceiver
OKI

OAT1042L-V1-D-05

Transceiver
OKI

OAT1042M-V1-A-05

Transceiver
OKI

OAT1042M-V1-B-05

Transceiver, 1290nm Min, 1330nm Max, 10300Mbps(Tx), 10300Mbps(Rx), MU Connector
OKI

OAT1042M-V1-B-10

Transceiver
OKI