OL3301N-05 [OKI]

Surface Mount Laser Diode Modules (1310 nm, 0.5 mW); 表面贴装激光二极管模块( 1310纳米, 0.5毫瓦)
OL3301N-05
型号: OL3301N-05
厂家: OKI ELECTRONIC COMPONETS    OKI ELECTRONIC COMPONETS
描述:

Surface Mount Laser Diode Modules (1310 nm, 0.5 mW)
表面贴装激光二极管模块( 1310纳米, 0.5毫瓦)

二极管 激光二极管
文件: 总8页 (文件大小:55K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DATA SHEET  
O
K
I
L
A
S
E
R
P
R
O
D
U
C
T
S
OL3300N-05 and OL3301N-05  
Surface Mount Laser Diode Modules  
(1310 nm, 0.5 mW)  
October 1999  
■ ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
CONTENTS  
OL3300N-05 and OL3301N-05 Surface Mount LD Modules ...................... 1  
Oki Semiconductor  
OL3300N-05 and OL3301N-05 LD Modules  
Surface Mount LD Modules for Single-Mode Fiber  
INTRODUCTION  
Oki Semiconductor’s OL3300N-05/OL3301N-05 family of surface mount laser diode modules feature a  
1.3-µm, InGaAsP/InP laser diode providing 1310-nm output at 0.5 mW. These low-cost laser diodes are  
available in 8-pin Mini-Dil packages, have a built-in monitor photodiode, and are coupled to single-  
mode fiber pigtails.  
FEATURES  
• InGaAsP/InP laser diode  
• Fiber output: 1310-nm output at 0.5 mW  
• 1.3-µm technology  
• Single-mode fiber  
• 8-pin Mini-Dil package  
• Includes a photodiode for power monitoring  
APPLICATION  
• Optical transmission systems  
• OL3301N-05: OC-48, 2.488 Gbps  
• OL3300N-05: 622 Mbps  
• Gigabit Ethernet  
• Digital video systems  
• LAN systems  
• Optical measurement / OTDRs  
Oki Semiconductor  
1
OL3300N-05 and OL3301N-05 LD Modules –––––––––––––––––––––––––––––––––––––––––––––––––––––––  
ELECTRICAL CHARACTERISTICS  
Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted)  
Parameter  
Symbol  
Pf  
Ratings  
Units  
mW  
V
Fiber Output Power  
2
Laser diode reverse voltage  
Photo diode forward current  
Photo diode reverse voltage  
Operating Temperature  
Storage Temperature  
VR(LD)  
IF(PD)  
VR(PD)  
Topr  
2
10  
mA  
V
15  
-40 to +85  
-40 to +85  
260  
°C  
Tstg  
°C  
Lead Soldering Temperature (1O sec)  
Tsol  
°C  
Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device.  
Optical and Electrical Characteristics (Ta=25°C)  
Parameter  
Fiber output power  
Symbol  
Pf  
Test Conditions  
Min.  
0.5  
-
Typ.  
Max.  
Units  
mW  
mA  
CW  
-
-
-
-
Threshold current  
Ith  
40  
Laser diode operating current  
Laser diode forward voltage  
Center wavelength  
IOP(LD)  
VOP(LD)  
λc  
mA  
V
Pf =0.5 mW  
---  
---  
1.5  
Pf =0.5 mW, RMS  
Ta=0 to 85°C  
1270  
-
1360  
nm  
RMS Spectral width  
Tracking error  
σ
Pf =0.5 mW, RMS (σ)  
7.7  
1.5  
nm  
dB  
TER  
Im=constant@  
Pf =0.5 mW (25°C)  
Rise and fall time (OL3300N-05)  
Rise and fall time (OL3301N-05)  
Monitor current  
10 to 90 %  
Pf =0.5 mW  
0.5  
ns  
ns  
µA  
0.15  
1000  
Im  
300  
Fiber Pigtail Specifications  
Parameter  
Specifications  
Units  
Type  
SM  
10 +/-1  
125 +/-2  
900  
---  
µm  
µm  
µm  
m
Mode Field Diameter  
Cladding Diameter  
Jacket Diameter  
Length  
1.0 (Minimum)  
FC  
Connector  
---  
2
Oki Semiconductor  
––––––––––––––––––––––––––––––––––––––––––––––––––––––– OL3300N-05 and OL3301N-05 LD Modules ■  
PACKAGE DIMENSIONS  
(Units: mm)  
11.20  
1.0  
2.50  
8
1
5
4
1.8  
(TOP VIEW )  
5.60  
0.25  
2.54 Typ  
1.0  
1.75  
3.0 Max  
All dimensions in mm (Typical)  
0.46 Typ  
0.17  
Photo Diode  
Laser Diode  
4
5
6
7
LEAD CONNECTIONS (TOP VIEW)  
#8  
#7  
#6  
#5  
CASE  
LD  
PD  
FIBER  
CASE  
#1  
CASE  
#2  
CASE  
#3  
#4  
Pin Configuration  
Pin Mo.  
01  
Description  
Pin No.  
05  
Description  
Case Ground  
Case Ground  
Case Ground  
PD Cathode  
PD Anode  
02  
03  
04  
06  
07  
08  
LD Cathode  
LD Anode  
Case Ground  
Oki Semiconductor  
3
OL3300N-05 and OL3301N-05 LD Modules –––––––––––––––––––––––––––––––––––––––––––––––––––––––  
Notes  
4
Oki Semiconductor  
The information contained herein can change without notice owing to product and/or technical improvements.  
Please make sure before using the product that the information you are referring to is up-to-date.  
The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action  
and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in  
the actual circuit and assembly designs.  
Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect,  
improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited  
to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range.  
Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with  
the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a  
third party's right which may result from the use thereof.  
When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges,  
including but not limited to operating voltage, power dissipation, and operating temperature.  
The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office  
automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for  
use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application  
where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such  
applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including  
life support and maintenance.  
Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser  
assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their  
own expense, for export to another country.  
Copyright 1999 Oki Semiconductor  
Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by  
Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki  
Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is  
granted under any patents or patent rights of Oki.  
Oki Semiconductor  
Oki REGIONAL SALES OFFICES  
Northwest Area  
Southwest Area  
785 N. Mary Avenue  
Sunnyvale, CA 94086  
Tel: 408/720-8940  
Fax: 408/720-8965  
2302 Martin Street  
Suite 250  
Irvine, CA 92715  
Tel: 979/752-1843  
Fax: 979/752-2423  
North Central Area  
Southeast Area  
300 Park Blvd.  
Suite 365  
Itasca, IL 60143  
Tel: 630/250-1313  
Fax: 630/250-1414  
1590 Adamson Parkway  
Suite 220  
Morrow, GA 30260  
Tel: 770/960-9660  
Fax: 770/960-9682  
Northeast Area  
138 River Road  
Shattuck Office Center  
Andover, MA 01810  
Tel: 978/688-8687  
Fax: 978/688-8896  
Oki Web Site:  
http://www.okisemi.com  
For Oki Literature:  
Call toll free 1-800-OKI-6388  
(6 a.m. to 5 p.m. Pacific Time)  
Oki Stock No: 320141-001  
Corporate Headquarters  
785 N. Mary Avenue  
Sunnyvale, CA 94086-2909  
Tel: 408/720-1900  
Fax: 408/720-1918  

相关型号:

OL3305E

Fixed Resistor, Carbon Film, 0.5W, 33ohm, 350V, 5% +/-Tol, -450ppm/Cel,
OHMITE

OL3305E-R52

RES 33 OHM 1/2W 5% AXIAL
OHMITE

OL3310L

DFB Laser Module Emitter, 1290nm Min, 1335nm Max, SC Connector, Surface Mount
OKI

OL3311L

FIBER OPTIC TRANSMITTER
ETC

OL3311L-2

DFB Laser Module Emitter, 1260nm Min, 1360nm Max, SC Connector, Surface Mount
OKI

OL3312N

FIBER OPTIC TRANSMITTER
ETC

OL3314L

DFB Laser Module Emitter, 1290nm Min, 1330nm Max, SC/PC Connector, Surface Mount
OKI

OL3315

Fixed Resistor, Carbon Film, 0.5W, 330ohm, 350V, 5% +/-Tol,
OHMITE

OL3315E-R52

RES 330 OHM 1/2W 5% AXIAL
OHMITE

OL3315EA52

Fixed Resistor, Carbon Film, 0.5W, 330ohm, 350V, 5% +/-Tol, 450ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
OHMITE

OL3315ER52

Fixed Resistor, Carbon Film, 0.5W, 330ohm, 350V, 5% +/-Tol, 450ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
OHMITE

OL3315L

DFB Laser Module Emitter, 1290nm Min, 1330nm Max, 10000Mbps, SC/PC Connector, Butterfly, Panel Mount
OKI