OL3450L-2-W127-NFMU [OKI]
DFB Laser Diode Emitter, 1267nm Min, 1273nm Max, 2500Mbps, MU Connector, Panel Mount, Through Hole Mount;型号: | OL3450L-2-W127-NFMU |
厂家: | OKI ELECTRONIC COMPONETS |
描述: | DFB Laser Diode Emitter, 1267nm Min, 1273nm Max, 2500Mbps, MU Connector, Panel Mount, Through Hole Mount 光纤 |
文件: | 总7页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
JOG-01128 Rev.5
Rev. 5 [12. 2005]
Electronics Components
OKI
OL2450L-2-Wnnn, OL2451L-2-Wnnn
OL2453L-2-Wnnn, OL3450L-2-Wnnn
OL3451L-2-Wnnn, OL3453L-2-Wnnn
OL4450L-2-Wnnn, OL4451L-2-Wnnn
OL4453L-2-Wnnn Series(W127-141)
2mWCoaxial DFB Laser Diode Modules
1.DESCRIPTION
The OL2450L-2-Wnnn, OL2451L-2-Wnnn, OL2453L-2-Wnnn, OL3450L-2-Wnnn,
OL3451L-2-Wnnn, OL3453L-2-Wnnn, OL4450L-2-Wnnn, OL4451L-2-Wnnn,
OL4453L-2-Wnnn series consist of an MQW-DFB laser diode, a monitor PD, a single-stage
optical isolator, a single-mode fiber and a coaxial package.
These modules are coaxial DFB Laser Diode Modules for CWDM 2.5Gbit/s transmission
with high power at high temperature.
2. FEATURES
Fiber output power: Pf=2.0mW
Wide operating temperature range: Tc=0 to +70°C
Side mode suppression: 32dB
Multi-quantum-well (MQW) DFB structure
Internal monitor PD for power control
Built-in single-stage optical isolator
Coaxial Package
No TEC required
3. APPLICATION
CWDM
Drawing No: JOG-01128 Rev.5
- 1 -
Oki Electric Industry Co., Ltd.
JOG-01128 Rev.5
OKI Electronics Components
4.OPTICAL AND ELECTRICAL CHARACTERISTICS
(Tc = 0 to +70°C, unless otherwise specified)
Parameter
Fiber Output Power
Symbol
Pf
Test Conditions
CW
Min.
2.0
Typ.
Max.
Unit
mW
Fiber Output Power
(Average)
PAVG
Modulated
1.0
mW
Tc=+25°C ,CW,BOL
Tc=+70°C,CW,BOL
7
25
15
40
1.5*Ith-
BOL
Threshold Current
Ith
mA
Tc=+70°C,CW,EOL
Operation Current
Slope efficiency
Iop
Pf=2.0mW,CW
Pf=2.0mW,
CW,Tc=+25°C
70
110
mA
W/A
mA
0.05
0.064
Modulation Current
Imod
Pf=2.0mW,CW,Tc=+25°C
OL245xL-2-W127
OL245xL-2-W129
OL345xL-2-W131
OL345xL-2-W133
2.0mW,
30
40
1267
1287
1307
1327
1347
1367
1387
1407
1270
1290
1310
1330
1350
1370
1390
1410
0.2
1273
1293
1313
1333
1353
1373
1393
1413
0.5
Pf=
Peak Wavelength
p
nm
CW
OL345xL-2-W135
OL345xL-2-W137
OL345xL-2-W139
Tc=25°C
OL445xL-2-W141
Spectral Width
Pf= 2.0mW,CW,-20dB
nm
dB
Side-mode suppression
ratio
SMSR
Pf=2.0mW,CW
32
40
PAVG=1.0mW,20-80%
ExR*=9dB
Rise/Fall times
Tr/Tf
0.09
0.15
ns
Relative Intensity Noise
Monitor Current
RIN
Im
Pf=2.0mW,CW
Pf= 2.0mW,CW, Tc=+25°C
-140
400
---
-130
2200
+1
dB/Hz
A
50
-1
Tracking Error**
TRE
Pf=2.0mW,CW
dB
*ExR=Extinction ratio
**TRE=10*log(Pf@0+70°C)/(Pf@25°C)at Im hold(@25°C)
Drawing No: JOG-01128 Rev.5
- 2 -
Oki Electric Industry Co., Ltd.
JOG-01128 Rev.5
OKI Electronics Components
5.ABSOLUTE MAXIMUM RATING
(Tc = +25°C, unless otherwise specified)
Parameter
Fiber Output Power
LD Reverse Voltage
Monitor PD Forward Current
Monitor PD Reverse Current
Monitor PD Reverse Voltage
Operating Case Temperature (Tc)
Storage Temperature
Symbol
Pf
Vrl
Ifd
Ird
Vrd
Tc
Rating
Unit
mW
V
mA
mA
V
C
C
C
4
2
10
3
30
0 to +70
-40 to +85
260
Tstg
-
Lead Soldering Temperature (10s)
6.CONNECTOR AND FIBER SPECIFICATIONS
Parameter
Type
Mode Field Diameter
Cladding Diameter
Jacket Diameter
Length
Specifications
Unit
SM
9+/-1
125+/-2
900
---
m
m
m
m
1(Min)
FC/SC/LC/MU/MU-J
Connector Type
---
Drawing No: JOG-01128 Rev.5
- 3 -
Oki Electric Industry Co., Ltd.
JOG-01128 Rev.5
OKI Electronics Components
7.ORDERING INFORMATION
OL 3 45 0 L – 2 – W131 – AF SC
Wavelength
2: 1.2 m
3: 1.3 m
4: 1.4 m
Pin Assignment
0: C type
1: A type
3: B type
(See P.5)
Peak Wavelength
W127: 1.27 m
W129: 1.29 m
W131: 1.31 m
W133: 1.33 m
W135: 1.35 m
W137: 1.37 m
W139: 1.39 m
W141: 1.41 m
Flange type
AF: Angled Flange
SF: Straight Flange
NF: No Flange
Connector type
SC: SC Connector
FC: FC Connector
LC: LC Connector
MU: MU Connector
MUJ: MU-J Connector
8.OUTLINE DRAWING
Length (mm)
Drawing No: JOG-01128 Rev.5
- 4 -
Oki Electric Industry Co., Ltd.
JOG-01128 Rev.5
OKI Electronics Components
All dimensions in millimeters
Flange Type
Angled flange
Straight flange
No flange
A,C type
C type
B type
A type
Pin Assignment
OL3451L (A type)
OL3450L (C type)
OL3453L (B type)
Drawing No: JOG-01128 Rev.5
- 5 -
Oki Electric Industry Co., Ltd.
JOG-01128 Rev.5
OKI Electronics Components
9. SAFETY INFORMATION ON THIS PRODUCT
Warning
A laser beam is emitted from this laser diode during operation.
The invisible or visible laser beam, directly or indirectly, may cause injury to
Laser Beam the eye
or loss of eyesight.
Do not look directly into the laser beam.
Avoid exposure to the laser beam, any reflected or collimated beam.
The product contains gallium arsenide, GaAs.
GaAs vapor and powder are hazardous to human health if inhaled, ingested or
swallowed.
Caution
GaAs
Product
Do not destory or burn the product.
Do not crush or chemically dissolve the product.
Do not put the product in the mouth.
Observe related laws and company regulations when discarding this product.
The product should be excluded from general industrial waste or household
garbage.
Caution
A glass-fiber is attached on the product. Handle with care.
Optical Fiber When the fiber is broken or damaged, handle carefully to avoid injury from
the damaged part or fragments.
All specifications described herein are subject to change without notice.
Drawing No: JOG-01128 Rev.5
- 6 -
Oki Electric Industry Co., Ltd.
JOG-01128 Rev.5
OKI Electronics Components
Notice
1. The information contained herein can change without notice owing to product and/or technical improvements.
Before using the product, please make sure that the information being referred to is up-to-date.
2. The outline of action and examples for application circuits described herein have been chosen as an
explanation for the standard action and performance of the product. When planning to use the product, please
ensure that the external conditions are reflected in the actual circuit, assembly, and program designs.
3. When designing your product, please use our product below the specified maximum ratings and within the
specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating
temperature.
4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation
resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or
unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified
maximum ratings or operation outside the specified operating range.
5. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is
granted by us in connection with the use of the product and/or the information and drawings contained herein.
No responsibility is assumed by us for any infringement of a third party’s right which may result from the use
thereof.
6. The products listed in this document are intended for use in general electronics equipment for commercial
applications (e.g., office automation, communication equipment, measurement equipment, consumer
electronics, etc.). These products are not authorized for use in any system or application that requires special
or enhanced quality and reliability characteristics nor in any system or application where the failure of such
system or application may result in the loss or damage of property, or death or injury to humans.
Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace
equipment, nuclear power control, medical equipment, and life-support systems.
7. Certain products in this document may need government approval before they can be exported to particular
countries. The purchaser assumes the responsibility of determining the legality of export of these products and
will take appropriate and necessary steps at their own expense for these.
8. No part of the contents contained herein may be reprinted or reproduced without our prior permission.
Sales Support
JAPAN/ASIA Oki Electric Industry Co., Ltd.
550-1, Higashiasakawa-cho, Hachioji-shi, Tokyo 193-8550
Phone: +81-426-62-6646
INTERNET: http://www.oki.com
AMERICA
Oki Optical Components
785 North Mary Avenue, Sunnyvale, CA 94086
Phone: +1-408-737-6379 Fax: +1-408-737-6579
INTERNET: http://www.okioptical.com
Oki Electric Europe GmbH
EUROPE
D-41460 Neuss, Germany
Phone: +49-2131-15960 Fax: +49-2131-103539
INTERNET: http://www.oki-europe.de
Copyright 2005 Oki Electric Industry Co., Ltd
Drawing No: JOG-01128 Rev.5
- 7 -
Oki Electric Industry Co., Ltd.
相关型号:
OL3450L-2-W127-NFMUJ
DFB Laser Diode Emitter, 1267nm Min, 1273nm Max, 2500Mbps, MUJ Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W127-SFFC
DFB Laser Diode Emitter, 1267nm Min, 1273nm Max, 2500Mbps, FC Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W127-SFLC
DFB Laser Diode Emitter, 1267nm Min, 1273nm Max, 2500Mbps, LC Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W127-SFMU
DFB Laser Diode Emitter, 1267nm Min, 1273nm Max, 2500Mbps, MU Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W127-SFMUJ
DFB Laser Diode Emitter, 1267nm Min, 1273nm Max, 2500Mbps, MUJ Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W129-AFFC
DFB Laser Diode Emitter, 1287nm Min, 1293nm Max, 2500Mbps, FC Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W129-AFLC
DFB Laser Diode Emitter, 1287nm Min, 1293nm Max, 2500Mbps, LC Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W129-AFSC
DFB Laser Diode Emitter, 1287nm Min, 1293nm Max, 2500Mbps, SC Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W129-NFLC
DFB Laser Diode Emitter, 1287nm Min, 1293nm Max, 2500Mbps, LC Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W129-NFMU
DFB Laser Diode Emitter, 1287nm Min, 1293nm Max, 2500Mbps, MU Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W129-NFMUJ
DFB Laser Diode Emitter, 1287nm Min, 1293nm Max, 2500Mbps, MUJ Connector, Panel Mount, Through Hole Mount
OKI
OL3450L-2-W129-SFFC
DFB Laser Diode Emitter, 1287nm Min, 1293nm Max, 2500Mbps, FC Connector, Panel Mount, Through Hole Mount
OKI
©2020 ICPDF网 联系我们和版权申明