OL6201N-5-A10 [OKI]
Service Channel FP Laser Module (1625 nm, 5 mW); 服务渠道FP激光器模块( 1625纳米, 5毫瓦)![OL6201N-5-A10](http://pdffile.icpdf.com/pdf1/p00025/img/icpdf/OL6201N-5_130505_icpdf.jpg)
型号: | OL6201N-5-A10 |
厂家: | ![]() |
描述: | Service Channel FP Laser Module (1625 nm, 5 mW) |
文件: | 总8页 (文件大小:64K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
DATA SHEET
O
K
I
L
A
S
E
R
P
R
O
D
U
C
T
S
OL6201N-5-A10
Service Channel FP Laser Module
(1625 nm, 5 mW)
October 1999
■ ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Oki Semiconductor
OL6201N-5-A10 Laser Module
1625-nm Service Channel FP Laser Module
INTRODUCTION
Oki Semiconductor’s OL6201N-5-A10 dual in-line package laser diode module features a cooled 1625-
nm laser diode coupled to a single-mode fiber. The OL6201N-5-A10 has built-in thermoelectric cooler
and is equipped with a monitor photodiode.
FEATURES
• 1625-nm MQW FP Laser
• Single-mode fiber
• Built-in thermoelectric cooler
• 5-mW fiber output power
• Includes a photodiode for power monitoring
• 14-pin Dil package
APPLICATIONS
• WDM systems
• Service Channel
• Cross connect systems
• Fiber-optic light source
• Telemetry systems
• Test instrumentation
Oki Semiconductor
1
■ OL6201N-5-A10 Laser Module ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted)
Parameter
Fiber Output Power
Symbol
Pf
Ratings
Units
mW
V
7
Laser diode reverse voltage
Laser diode forward current
Photo diode reverse voltage
Photo diode forward current
Thermoelectric cooler voltage
Thermoelectric cooler current
Operating Temperature
VRLD
IFLD
VRPD
IFPD
2
200
mA
V
20
10
mA
V
V
3.0
TEC
I
1.5
A
TEC
Topr
Tstg
-20 to +65
-40 to +85
°C
Storage Temperature
°C
Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device.
Optical and Electrical Characteristics (Ta=25°C)
Parameter
Fiber output power
Symbol
Pf
Test Conditions
Min.
Typ.
Max.
-
Units
mW
mA
mA
V
IF(LD)=150 mA
5
-
Threshold current
Ith
-
-
60
180
2.5
1635
5
Laser diode operating current
Laser diode operating voltage
Center wavelength
IF(LD)
VF(LD)
-
150
-
-
-
-
λ
Pf= 5 mW, CW
1610
nm
nm
ns
c
RMS Spectral width
Rise time
σ
Pf=5 mW, CW, RMS
-
-
τR
τF
IBIAS=Ith
Pf=5 mW, 10-90%
1
Fall time
-
1
ns
PD capacitance
CT
-
15
-
-
pF
Thermoelectric cooler capacity
Thermoelectric cooler current
Thermoelectric cooler voltage
Thermistor resistance
∆
Pf=5 mW
∆T=40˚C, Pf=5 mW
∆T=40˚C, Pf=5 mW
-
40
-
-
˚C
T
ITEC
VTEC
Rth
-
1.0
2.0
10.5
A
-
-
V
9.5
-
kΩ
Fiber Pigtail Specifications
Parameter
Type
Specifications
Units
SM
9 +/- 1
---
µm
µm
µm
m
Mode field diameter
Cladding diameter
Jacket diameter
Length
125 +/- 2
900
1 (minimum)
FC/PC
Connector
-
2
Oki Semiconductor
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OL6201N-5-A10 Laser Module ■
PACKAGE DIMENSIONS
(Units: mm)
5.0
1.0
1.0
20.8
24 ±1
16.0
RUBBER HOOD
STAINLESS STEEL SLEEVE
7.1
9.0
SMF
Tolerance = 0.5 mm (unless noted otherwise)
3.8
ø0.45
2.54
Dimensions in mm.
TERMINAL CONNECTION (BOTTOM VIEW - NOT TO SCALE)
#8
#7
#9
#10
#11
#12
#13
#14
T.E.C
#1
LD
TH
(-)
FIBER
PD
CASE
(+)
TH:
Thermistor
T.E.C: Thermo-Electric Cooler
#6
#5
#4
#3
#2
Pin Configuration
Pin Mo.
Description
Pin No.
Description
01
02
03
04
05
06
07
Thermo Electric Cooler Anode (+)
08
PD Anode
NC
NC
NC
09
10
11
12
13
14
LD Cathode
LD Anode, Case Ground, and internal connect to pin 5
Thermistor
LD Anode, Case Ground, and internal connect to pin 10
Thermistor
NC
NC
PD Cathode
Thermo Electric Cooler Cathode (-)
Oki Semiconductor
3
■ OL6201N-5-A10 Laser Module ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Notes:
4
Oki Semiconductor
The information contained herein can change without notice owing to product and/or technical improvements.
Please make sure before using the product that the information you are referring to is up-to-date.
The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action
and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in
the actual circuit and assembly designs.
Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect,
improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited
to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range.
Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with
the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a
third party's right which may result from the use thereof.
When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges,
including but not limited to operating voltage, power dissipation, and operating temperature.
The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office
automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for
use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application
where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such
applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including
life support and maintenance.
Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser
assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their
own expense, for export to another country.
Copyright 1999 Oki Semiconductor
Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by
Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki
Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is
granted under any patents or patent rights of Oki.
Oki Semiconductor
Oki REGIONAL SALES OFFICES
Northwest Area
Southwest Area
785 N. Mary Avenue
Sunnyvale, CA 94086
Tel: 408/720-8940
Fax: 408/720-8965
2302 Martin Street
Suite 250
Irvine, CA 92715
Tel: 979/752-1843
Fax: 979/752-2423
North Central Area
Southeast Area
300 Park Blvd.
Suite 365
Itasca, IL 60143
Tel: 630/250-1313
Fax: 630/250-1414
1590 Adamson Parkway
Suite 220
Morrow, GA 30260
Tel: 770/960-9660
Fax: 770/960-9682
Northeast Area
138 River Road
Shattuck Office Center
Andover, MA 01810
Tel: 978/688-8687
Fax: 978/688-8896
Oki Web Site:
http://www.okisemi.com
For Oki Literature:
Call toll free 1-800-OKI-6388
(6 a.m. to 5 p.m. Pacific Time)
Oki Stock No: 320145-001
Corporate Headquarters
785 N. Mary Avenue
Sunnyvale, CA 94086-2909
Tel: 408/720-1900
Fax: 408/720-1918
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00280/img/page/OL6204N-100-_1671425_files/OL6204N-100-_1671425_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00280/img/page/OL6204N-100-_1671425_files/OL6204N-100-_1671425_2.jpg)
OL6204N-100-AP10-LC
Transmitter, 1615nm Min, 1635nm Max, LC/SPC Connector, DIP, Panel Mount, DIP-14
OKI
![](http://pdffile.icpdf.com/pdf2/p00280/img/page/OL6204N-100-_1671425_files/OL6204N-100-_1671425_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00280/img/page/OL6204N-100-_1671425_files/OL6204N-100-_1671425_2.jpg)
OL6204N-100-AP10-SC
Transmitter, 1615nm Min, 1635nm Max, SC/SPC Connector, DIP, Panel Mount, DIP-14
OKI
![](http://pdffile.icpdf.com/pdf2/p00312/img/page/OL6204N-100-_1874737_files/OL6204N-100-_1874737_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00312/img/page/OL6204N-100-_1874737_files/OL6204N-100-_1874737_2.jpg)
OL6204N-100/AP20
Transmitter, 1605nm Min, 1645nm Max, FC/SPC Connector, Through Hole Mount, DIP-14
OKI
©2020 ICPDF网 联系我们和版权申明