2ZAP-2G [OMRON]

Pushbutton Switch, SPDT, Momentary, 15A, 8VDC, Screw Terminal, Panel Mount;


型号：	2ZAP-2G
厂家：	OMRON ELECTRONICS LLC
描述：	Pushbutton Switch, SPDT, Momentary, 15A, 8VDC, Screw Terminal, Panel Mount 开关光电二极管
文件：	总4页 (文件大小：365K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Pushbutton Switch (Cylindrical 30-dia.)

ZAP

CSM_ZAP_DS_E_3_1

Long Service Life with Built-in Z-series

Basic Switch

• Using a Basic Switch enables direct switching of large-capacity

loads

• Shock-absorbing construction of Operation Unit protects the Switch

• Drip-proof Pushbutton construction enables use in locations subject to

splashing water and oil and scattering dust.

• Pushbuttons are available in three shapes and six colors.

Refer to Safety Precautions for All Pushbutton Switches

and Safety Precautions on page 3.

Ordering Information

Operation Unit color

Shape of Operation

Classification

Output

Unit

Blue (-A)

ZAP-A

Black (-B)

ZAP-B

Green (-G)

Red (-R)

White (-W)

Yellow (-Y)

ZAP-Y

ZAP-G

ZAP-R

ZAP-W

36 dia. 25 dia.

2ZAP-A

ZAP-1A

2ZAP-1A

ZAP-2A

2ZAP-2A

2ZAP-B

ZAP-1B

2ZAP-1B

ZAP-2B

2ZAP-2B

2ZAP-G

ZAP-1G

2ZAP-1G

ZAP-2G

2ZAP-2G

2ZAP-R

ZAP-1R

2ZAP-1R

ZAP-2R

2ZAP-2R

2ZAP-W

ZAP-1W

2ZAP-1W

ZAP-2W

2ZAP-2W

2ZAP-Y

ZAP-1Y

2ZAP-1Y

ZAP-2Y

2ZAP-2Y

Momentary

operation

36 dia. 25 dia.

40 dia.

Note: Models with special specifications are available for use in environments with high humidity or outdoors.

Contact your OMRON representative for information.

Specifications

Ratings

Item

Non-inductive load (A)

Resistive load Lamp load

NC NO

Inductive load (A)

Inductive load Motor load

NC NO

Rated voltage (V)

Built-in Switch

125 VAC

200 VAC

500 VAC

2.5

1.5

1.25

0.75

2.5

1.5

0.75

1.5

8 VDC

0.5

0.25

0.5

0.25

1.5

0.5

0.25

0.05

0.03

0.05

0.03

2.5

0.05

0.03

Z-15G5-B

14 VDC

30 VDC

125 VDC

250 VDC

Note: 1. The above values are for steady-state currents.

2. Inductive load: Power factor = 0.4 (AC); time constant = 7 ms (DC).

3. The lamp load has an inrush current of 10 times the steady-state current.

4. The motor load has an inrush current of 6 times the steady-state current.

5. Standard testing condition.

(1) Ambient temperature: 20 2°C

(2) Ambient humidity: 65% 5%RH

(3) Operating frequency: 20 times/min

ZAP

Specifications

Characteristics

Operating Characteristics

Model

Operat-

ing fre-

quency

Mechanical

60 operations/min

20 operations/min

ZAP-@@

Approx. 9.81 N

2ZAP-@@

Approx. 14.7 N

Operating characteristics

Operating force

Electrical

Insulation resistance

Contact resistance

100 MΩ min. (at 500 VDC)

30 mΩ max. (initial value)

Contact Form

Between terminals of same

polarity

1,000 VAC, 50/60 Hz for 1 min

Name

Contact form

Dielectric

strength

Between current-carrying metal part

and ground, and between each termi-

nal and non-current-carrying metal part

2,000 VAC, 50/60 Hz for

1 minute

Double-throw contacts

COM

Vibra-

tion re-

sistance

10 to 55 Hz, 1.5-mm double

amplitude (1 ms max.)

Malfunction

Approved Safety Standards

• The built-in Z-15G5-B Switch is approved for UL and CSA.

Destruction

Malfunction

Mechanical

Electrical

500 m/s²

Shock re-

sistance

200 m/s²max. (1 ms max.)

1,000,000 operations min.

500,000 operations min.

Approx. 130 to 210 g

30 A max.

Durabili-

Weight

Inrush

current

15 A max.

−25 to 80°C (with no icing or

Ambient operating temperature

Ambient operating humidity

Ambient storage temperature

condensation)

35% to 85%RH

−25 to 80°C (with no icing or

condensation)

Degree of protection

IP65 (Operation Unit only)

Electric shock protection class

PTI (proof tracking index)

Pollution degree

Class II

175

3 (IEC947-5-1)

Dimensions Insert one of the following letters into the box (@) at the end of the model number. Refer to Ordering Information for color symbols. (Unit: mm)

Mounting panel thickness:

1.6 to 6 mm

Rubber packing

ZAP-@

2ZAP-@

ZAP-@

2ZAP-@

Z-15G5-B Basic Switch

Washer

24.6

36 dia.

25 dia.

49.2 52

9.75

43.5

51.8 max.

Three, M4 ✕ 5.5

Terminal screws

(with toothed washer)

10.8

40 dia.

* Chromed plating

ZAP-1@

ZAP-2@

2ZAP-1@

2ZAP-2@

40 dia. 36 dia.

36 dia. 25 dia.

Mounting panel thickness:

1.6 to 6 mm

Mounting panel thickness:

1.6 to 6 mm

27.6

15.8

* Chromed plating

ZAP

Dimensions

(Unit: mm)

Panel Cutouts

Accessories

Rubber Cap

5.2 dia.

• Use the special rubber cap to use the Switch in locations subject to

significant splashing water and oil or scattering dust.

Cannot be used, however, with the (2) ZAP-2.

30.5 0.3

dia. hole

Color

Model

ZB-A

ZB-B

ZB-G

ZB-R

ZB-W

ZB-Y

Blue (-A)

Black (-B)

Green (-G)

Red (-R)

White (-W)

Yellow (-Y)

Safety Precautions

Refer to Safety Precautions for All Pushbutton Switches.

Precautions for Correct Use

Insulation

• After wiring the Switch, ensure an appropriate insulating distance.

Wiring

• Tighten the terminal screws to a torque of 0.78 to 1.18 N·m.

Mounting

• Tighten the face nut to a torque of 0.98 to 1.76 N·m.

• For panel mounting, always use a washer (or a nameplate) and

rubber packing.

Washer

(or nameplate)

Rubber packing

Mounting panel

t = 1.6 to 6 mm

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:



Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.



Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2011.8

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/

2ZAP-2G [OMRON]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB