A165E [OMRON]
Mounting Aperture of 16 mm; 安装16毫米口径型号: | A165E |
厂家: | OMRON ELECTRONICS LLC |
描述: | Mounting Aperture of 16 mm |
文件: | 总7页 (文件大小:282K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Emergency Stop Switch
A165E
Mounting Aperture of 16 mm
• Modular construction, easy installation
• Direct opening mechanism with minimum contact
separation of 3 mm in accordance with EN60947-5-
Æ
1,
. (only for NC contacts)
• Conforms to EN418, EN60947-5-1.
• Includes a safety lock to prevent misuse.
• Features separate construction that allows the
Switch to be separated for easier wiring and one-
piece-like construction that allows easier handling.
• High reliability, IP65
• Short mounting depth, less than 28.5 mm below pan-
el
• Quick and easy assembly, snap-in Switch.
• A165E is identifiable, clearly visible and will stop a
dangerous process, without creating additional haz-
ards.
Model Number Structure
Model Number Legend
A165E-##-#-#
1
2
3
4
1. Lighted/Non-lighted
4. Contacts
None: Non-lighted
01: SPST (NC)
02: DPST (NC)
03U: TPST (NC)
L:
Lighted
2. Head Size
One-body, non-lighted models only
S:
M:
30 mm dia.
40 mm dia.
3. Illumination (Operation Voltage/Rated Voltage)
None: Non-lighted
24D: LED (24 VDC)
D-208
Safety Sensors / Components
Ordering Information
List of Models
Standard load
(125 VAC at 5 A,
250 VAC at 3 A,
30 VDC at 3 A)
Illumination
Rated voltage
Pushbutton color Pushbutton size
Terminal
Contact
SPST-NC
A165E-LS-24D-01
A165E-LS-24D-02
A165E-S-01
LED
24 VDC
---
DPST-NC
SPST-NC
DPST-NC
TPST-NC
SPST-NC
DPST-NC
SPST-NC
DPST-NC
TPST-NC
30 dia.
None
LED
A165E-S-02
A165E-S-03U
A165E-LM-24D-01
A165E-LM-24D-02
A165E-M-01
Red
Solder terminal
24 VDC
---
40 dia.
None
A165E-M-02
A165E-M-03U
Note: The above models have a surface indication of “RESET.” Models with “STOP” indication are also available. For further information, contact
your OMRON representative.
Accessories (Order Separately)
Item
Appearance
Type
Model
A16Z-5070
Precautions
Use this as an emergency stop
nameplate.
Yellow Plate
Yellow, 45 dia.
Rectangular
Square
A16ZJ-3003
A16ZA-3003
A16ZT-3003
Used for covering the panel cutouts
for future panel expansion.
Panel Plug
Tightening Tool
Extractor
Round
Useful for repetitive mounting. Be
careful not to tighten excessively.
---
---
A16Z-3004
A16Z-5080
Convenient for extracting the Switch
and Lamp.
Specifications
Approved Standards
Recognized Organization
Standards
File No.
UL, cUL (see note)
AZCO
UL508
E41515
C9805501
EN60947-5-1
Note: UL: UL508, cUL: CSA C22 No. 14
Approved Standard Ratings
UL, cUL
Rated current
Rated voltage
125 VAC
250 VAC
30 VDC
A165E series
A165E-U series
5 A (General use)
3 A (General use)
3 A (Resistive)
1 A (General use)
0.5 A (General use)
1 A (Resistive)
A165E
D-209
Ratings
Switch Ratings
Resistive load
A165E series A165E#-U series
Rated voltage
125 VAC
250 VAC
30 VDC
5 A
3 A
3 A
1 A
0.5 A
1 A
Minimum applicable
load
150 mA at 5 VDC
1 mA at 5 VDC
Characteristics
Item
Emergency Stop Switch
Mechanical
Electrical
20 operations/minute max.
10 operations/minute max.
100 MW min. (at 500 VDC)
Allowable operating
frequency
Insulation resistance
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each
terminal and ground
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min between lamp terminals (see note)
Vibration resistance
Shock resistance
Malfunction
Destruction
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
500 m/s2
300 m/s2 max. (malfunction within 1 ms),
150 m/s2 max. In case of A165E#U series
Malfunction
Mechanical
Electrical
100,000 operations min.
100,000 operations min.
Durability
Operating:-10°C to 55°C (with no icing or condensation)
Storage:-25°C to 65°C (with no icing or condensation)
Ambient temperature
Ambient humidity
Operating:35% to 85%
Electric shock protection class
PTI (tracking characteristic)
Degree of contamination
Weight
Class II
175
3
Approx. 16 g (in case of DPDT Switches)
Note: LED not mounted. Test them with the LED removed.
Operating Characteristics
Features
Characteristics
Operating force (OF) max.
Releasing force (RF) min.
Pretravel (PT)
14.7 N
0.1 N·m
3.5 0.5 mm (3 0.5 mm In case of A165E#U series)
D-210
Safety Sensors / Components
Nomenclature
\
Illumination Colors
∑
LED Illumination
Red
∑
Non-lighted
Red
Protective Structure and Terminal Type
∑
Protective Structure
Oil-resistant IP65
∑
Terminal Type
Solder terminals
(tab terminals #110)
Illumination Method
∑
LED
Lamp
∑
LED lamp
Switch Specifications
∑
Standard Loads
5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC
Note: A165E Emergency Stop Switch must be ordered as a set.
No LED is installed for the non-lighted model.
Push-lock, Turn-reset System Prevents Misuse
Safety Lock Prevents Misuse
Contact open
Even if an object or person touches the pushbutton by mistake, the
contact will not be released unless the pushbutton reaches the lock
position.
Contact closed
Lock position
A165E
D-211
Dimensions
Note: All units are in millimeters unless otherwise indicated.
A165E
Non-lighted models
30 dia.
Mounting ring
30 mm diameter
Note: 1. When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
Lock ring
Lock
Packing (T0.5)
3+0.1 dia.
0
2. Recommended panel thickness:
0.5 to 3.2 mm.
Panel cutout
dimensions
16+0.2 dia.
0
22.1 0.8
A165E
Lighted models
30 mm diameter
30 dia.
Mounting ring
Lock ring
Lock
Note: 1. When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
Packing (T0.5)
3+0.1 dia.
0
2. Recommended panel thickness:
0.5 to 3.2 mm.
Panel cutout
dimensions
16+0.2 dia.
0
22.1 0.8
22.7
A165E#U
30 dia.
One-body models
30 mm diameter
Mounting ring
Note: 1. When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
3+0.1 dia.
0
16+0.2 dia.
Packing (T0.5)
Lock ring
0
2. Recommended panel thickness:
0.5 to 3.2 mm.
Panel cutout
dimensions
Mounting ring
D-212
Safety Sensors / Components
A165E
Non-lighted models
40 mm diameter
40 dia.
Mounting ring
Switch
M16¥1
Lock ring
Lock
Packing (T0.5)
2.6
1.4
3+0.1 dia.
Note: 1. When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
0
16+0.2 dia.
0
2. Recommended panel thickness:
0.5 to 3.2 mm.
Panel cutout
dimensions
10.8 0.5
21.1 0.8
20 0.8
28.5 0.8
A165E
Lighted models
40 mm diameter
40 dia.
Mounting ring
Switch
M16¥1
Lock ring
Lock
Packing (T0.5)
3+0.1 dia.
0
16+0.2 dia.
Note: 1. When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
0
2. Recommended panel thickness:
0.5 to 3.2 mm.
Panel cutout
dimensions
A165E#U
Non-lighted,
one-body models
40 mm diameter
40 dia.
21.5 0.5
Operation part
1
M16¥1
SR82
Lock
Packing (T0.5)
Lock ring
3+0.1 dia.
0
16+0.2 dia.
0
Note: 1. When applying a coating such as
paint to the panel, dimensions
after the coating must satisfy the
specified dimensions.
2. Recommended panel thickness:
0.5 to 3.2 mm.
Panel cutout
dimensions
Mounting ring
A165E
D-213
Accessories
Yellow Plate (Vinyl Chloride)
Panel Plugs
Select an appropriate Panel Plug according to the panel design and
mount from the front side of the panel. Panel cutout dimensions are
the same as those for the Switch.
A16Z-5070
Rectangular
Square
Round
Screw Fitting
15.6 dia.
t=1
45 dia.
A16Z-3004
Lock Ring
18 dia.
Rough surface
15.8 0.1 dia.
Rough
surface
0
15 dia.-0.1
Terminal Arrangement
SPST Switches
DPST Switches
TPST Switches
NC2
NC1
Stopper
NC3
Note: The L+ and L- terminals are not available with the non-lighted models.
D-214
Safety Sensors / Components
相关型号:
©2020 ICPDF网 联系我们和版权申明