A165K-A3ML-2 [OMRON]
Keylock Switch, DPDT, 3A, 30VDC;
| 型号： | A165K-A3ML-2 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Keylock Switch, DPDT, 3A, 30VDC 开关 光电二极管 |
| 文件： | 总14页 (文件大小：210K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Key-type Selector Switch
A165K
Mounting Aperture of 16 mm
Modular construction
Oil-resistant IP65 models
UL and CSA approved.
Conforms to EN60947-5-1, IEC947-5-1
Short mounting depth, less than 28.5 mm below
panel
Wide range of switching capacity from standard to
microload
Automatic and manual models available
RcR
Ordering Information
Model Number Legend
The model numbers used to order sets of Units are illustrated below. One set comprises the Selector, Switch, and 2 Keys.
(1) (2) (3) (4)
A 1 6 5 K - J 3ML - 2
(1) Shape of Selector
(3) Contact Configuration
Symbol
Shape
Rectangular
Square
Color
Symbol
Type
Terminal
J
1
SPDT
DPDT
SPDT
DPDT
DPDT
Solder
Terminal
A
2
Black
T
Round
PCB
Terminal
1P
2P
2S
Square
BA
(24-mm square)
Screw-Less
Clamp
(2) Number of Notches/Resetting Method
Symbol No. of notches Reset method
2ML
Key release position
Left
Note: 1. Only DPDT contacts are
available with 3-notch mod-
els
2MR
2M
Right
Manual
2 notches
3 notches
Left and right
Left
2. PCB terminals are available
only with 2-notch models.
2AL
Automatic
3MC
3MR
3ML
3M
Center
Right
Manual
Left
Left, right, and center
Center
3 notches
3 notches
3AC
3MAC
3MAL
3MA
3AMC
3AMR
3AM
Automatic
Center
CCW-manual,
CW-automatic
Left
Left, center
Center
CCW-automatic,
CW-manual
3 notches
Right
Center, right
94
A165K
A165K
Model Number Legend (Subassembly)
1. Selector
A165K-jj
1
2
1. Flange Shape
J: Rectangular
A: Square
2. Number of Notches/Reset Method/Key Release Position
2ML: 2 notches/Manual/Left
2MR: 2 notches/Manual/Right
T: Round
2M: 2 notches/Manual/Right and left
2AL: 2 notches/Automatic/Left
BA: Square (24-mm square)
3MC: 3 notches/Manual/Center
3MR: 3 notches/Manual/Right
3ML: 3 notches/Manual/Left
3M: 3 notches/Manual/Right, left, and center
3AC: 3 notches/Automatic/Center
2. Switch (Same as for Knob-type Selector Switches)
A16S-j-jj
1
2
3
1. Number of Notches
2N: 2 notches
3N: 3 notches
2. Contacts
1: SPDT
2: DPDT
3. Terminals
None: Solder terminals (tab terminals #110)
95
A165K
A165K
Ordering as a Set
The model numbers used to order sets of Units are given in the following tables. One set comprises the Selector and Switch.
Solder Terminals
A165K-J (Rectangular) Models
IP65 Oil-resistant
Number of notches
Output
Reset method
Manual
Key release position
Left
Model
A165K-J2ML-1
A165K-J2MR-1
A165K-J2M-1
A165K-J2AL-1
2 notches
SPDT
DPDT
DPDT
Right
Left and right
Left
Automatic
Manual
Left
A165K-J2ML-2
A165K-J2MR-2
A165K-J2M-2
A165K-J2AL-2
Right
Left and right
Left
Automatic
Manual
3 notches
Center
A165K-J3MC-2
A165K-J3MR-2
A165K-J3ML-2
A165K-J3M-2
Right
Left
Left, right, and center
A165K-A (Square) Models
IP65 Oil-resistant
Number of notches
Output
Reset method
Key release position
Model
A165K-A2ML-1
A165K-A2MR-1
A165K-A2M-1
A165K-A2AL-1
2 notches
SPDT
DPDT
DPDT
Manual
Left
Right
Left and right
Left
Automatic
Manual
Left
A165K-A2ML-2
A165K-A2MR-2
A165K-A2M-2
A165K-A2AL-2
Right
Left and right
Left
Automatic
Manual
3 notches
Center
A165K-A3MC-2
A165K-A3MR-2
A165K-A3ML-2
A165K-A3M-2
Right
Left
Left, right, and center
96
A165K
A165K
A165K-T (Round) Models
IP65 Oil-resistant
Number of notches
Output
Reset method
Manual
Key release position
Left
Model
A165K-T2ML-1
A165K-T2MR-1
A165K-T2M-1
A165K-T2AL-1
2 notches
SPDT
DPDT
DPDT
Right
Left and right
Left
Automatic
Manual
Left
A165K-T2ML-2
A165K-T2MR-2
A165K-T2M-2
A165K-T2AL-2
Right
Left and right
Left
Automatic
Manual
3 notches
Center
A165K-T3MC-2
A165K-T3MR-2
A165K-T3ML-2
A165K-T3M-2
Right
Left
Left, right, and center
97
A165K
A165K
Ordering Individually
Selectors and Switches can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also,
store the parts as spares for maintenance and repairs.
Selectors
Appearance
Number of notches
Reset method
Manual
Key release position
Model
A165K-J2ML
Rectangular
2 notches
(A165K-J)
A165K-J2MR
A165K-J2M
A165K-J2AL
A165K-J3MC
A165K-J3MR
A165K-J3ML
A165K-J3M
A165K-J3AC
Automatic
Manual
3 notches
Automatic
3 notches
Mixed-
operation
A165K-J3MAC
A165K-J3MAL
A165K-J3MA
A165K-J3AMC
A165K-J3AMR
A165K-J3AM
A165K-A2ML
A165K-A2MR
A165K-A2M
Mixed-
operation
Square
(A165K-A)
2 notches
3 notches
Manual
Automatic
Manual
A165K-A2AL
A165K-A3MC
A165K-A3MR
A165K-A3ML
A165K-A3M
A165K-A3AC
Automatic
3 notches
Mixed-
operation
A165K-A3MAC
A165K-A3MAL
A165K-A3MA
A165K-A3AMC
A165K-A3AMR
A165K-A3AM
Mixed-
operation
98
A165K
A165K
Appearance
Number of notches
Reset method
Manual
Key release position
Model
A165K-T2ML
Round (A165K-T)
2 notches
A165K-T2MR
A165K-T2M
A165K-T2AL
A165K-T3MC
A165K-T3MR
A165K-T3ML
A165K-T3M
A165K-T3AC
Automatic
Manual
3 notches
Automatic
3 notches
Mixed-
operation
A165K-T3MAC
A165K-T3MAL
A165K-T3MA
A165K-T3AMC
A165K-T3AMR
A165K-T3AM
Mixed-
operation
Switches
Appearance
Classification
Model
Switch
2 notches
Solder terminal
PCB terminal
SPDT
DPDT
DPDT
SPDT
A16S-2N-1
A16S-2N-2
A16S-3N-2
3 notches
2 notches
A16S-2N-1P
A16S-2N-2P
DPDT
Switches with Screw-Less Clamp
Appearance
Classification
2 notches
Model
Remarks
Common to
general load and
micro load.
DPDT
Non-lighted
A16-2S
Common to ones
for pushbutton
switches.
3 notches
A16S-3N-2LS
---
99
A165K
A165K
Accessories (Order Separately)
Accessories
Name
Appearance
Classification
Model
Remarks
Panel Plugs
Used for covering the panel
cutouts for future panel expansion.
Rectangular
Square
A16ZJ-3003
A16ZA-3003
A16ZT-3003
Protective code: IP40
Round
Tools
Applicable types
Name
Appearance
Model
Remarks
Pushbut-
ton Switch
Knob-
type
Selector
Switch
Key-type
Selector
Switch
Emer-
gency
Stop
Indicator
Switch
Screw Fitting
Extractor
A16Z-3004 Yes
A16Z-5080 Yes
Yes
Yes
Yes
Yes
Convenient for
ganged
installation.
Tighten to a
torque of
0.98 N
m
Yes
Yes
Yes
Yes
Convenient for
extracting the
Switches and
Lamps.
Specifications
Approved Standards
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (General Use)
3 A at 30 VDC (Resistive)
EN60947-5-1 (Low Voltage Directive)
Ratings
AC resistive load
3 A at 250 VAC
5 A at 125 VAC
Contact
DC resistive load
3 A at 30 VDC
Name
Contact
DPDT
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following
conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20°±2°C
4. Operating frequency: 20 times/min
100
A165K
A165K
Characteristics
Item
Key-type Selector Switch
Allowable operating
frequency
Mechanical
Electrical
20 operations/minute max.
10 operations/minute max.
Insulation resistance
Dielectric strength
100 M
Ω min. (at 500 VDC)
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each
terminal and ground
Vibration resistance Malfunction
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
2
Shock resistance
Mechanical
Malfunction
Mechanical
Electrical
500 m/s
2
150 m/s max. (malfunction within 1 ms)
Life expectancy
250,000 operations min. (life of key: 10,000 operations min.)
100,000 operations min.
Ambient temperature
Ambient humidity
Operating: –10°C to 55
°
C (with no icing or condensation)
C (with no icing or condensation)
Storage: –25°C to 65
°
Operating: 35% to 85%
Class II
Electric shock protection class
PTI (tracking characteristic)
Degree of contamination
Weight
175
3 (IEC947-5-1)
Approx. 26.5 g (in the case of a DPDT switch key)
Note: Set and reset constitute one operation.
Operating Characteristics
Key-type Selector Switch
Type
2 notches
3 notches
Features
Operating force (OF) max.
Set position (SP)
9.8 N S m
+10
90±5°
45°
/
0
Operation Angle
Two notches
Three notches
(75°)
(45°)
(45°)
Note: The angle used for automatic
reset is shown in parentheses.
101
A165K
A165K
Nomenclature
Selector
Key
Flange Shape
Rectangular (A165K-J)
Number of Notches and Reset Method
•
2 Notches
Manual
Automatic
Square (A165K-A)
Round (A165K-T)
•
3 Notches
Manual
Mixed-operation
Protective Structure
•
Oil-resistant IP65
Switch
Switch Specifications
•
Standard Loads
5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC
Minimum applicable load: 1 mA at 5 VDC
Terminal Type
•
Solder terminals
(tab terminals #110)
•
PCB terminals
Contacts
Contact
Notch
SPDT
DPDT
Position
SW
Position
SW1
SW2
2
notches
3 notches
---
102
A165K
A165K
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Key-type Selector Switches
Rectangular
A165K-J
Solder terminals (tab terminals #110)
Model, standard, lot No., serial number
Mounting nut
Lock ring
Packing (t0.5)
Note: See page 104 for panel cutouts.
Square
A165K-A
Solder terminals
(tab terminals #110)
Model, standard, lot No., serial number
Mounting nut
Lock ring
Packing (t0.5)
Note: See page 104 for panel cutouts.
Round
A165K-T
Solder terminals
(tab terminals #110)
Model, standard, lot No., serial number
Packing (t0.5)
Mounting nut
Lock ring
Note: See page 104 for panel cutouts.
103
A165K
A165K
The following diagrams show the rectangular model as a representative example.
Rectangular
A165K-J
PCB terminals
Mounting nut
Lock ring
Packing (t0.5)
Note: See page 104 for panel cutouts.
Rectangular
A165Kj-2S
Screw-Less Clamp
Switch dismounting lever
Lock ring
Mounting ring
Packing (t0.5)
(for oil-resistant IP65 only)
Panel Cutouts
Models with Solder Terminals
Rectangular
A165j-J
Square A165j-A
Round A165j-T
(Top View)
(Top View)
16+0.2dia.
24 min.
16+0.2dia.
0
0
19 min.
19 min.
19 min.
Note: 1. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm.
2. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
104
A165K
A165K
Models with PCB Terminals
Rectangular
A165j-J
Square A165j-A
Round A165j-T
Rectangular
A165Kj-2S
(Top View)
(Top
View)
(Top View)
16+0.2dia.
24 min.
16+0.2dia.
25 min.
16+0.2dia.
0
0
0
24 min.
19 min.
24 min.
33 min.
(Dimension A)
Recommended panel thickness: 0.5 to 3.2 mm
Note: 1. Ensure that the variation in the distance between the centers of neighboring mounting holes is less than ±0.1 mm.
2. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm. If, however, a Switch Guard or Dust Cover is used, the
thickness of the mounting panel must be 0.5 to 2 mm.
3. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
Terminal Arrangement
Models with Solder Terminals without Reduced-voltage Lighting
Lamp terminals are not provided with the Non-lighted Knob-type Selector Switches and Key-type Selector Switches.
Lighted SPDT Switches
Lighted DPDT Switches
T
erminal Arrangement
T
erminal Arrangement
(Bottom View)
(Bottom View)
Dimensions of
Dimensions of
Terminal Holes
Terminal Holes
Lamp terminal
Lamp terminal
Note: The L+ is not shown
Note: The L+ is not shown
on the Switch.
on the Switch.
Non-lighted SPDT Switches
Dimensions of
Non-lighted DPDT Switches
Dimensions of
T
erminal Arrangement
T
erminal Arrangement
(Bottom View)
(Bottom View)
Side with TOP
indicated
Side with TOP
indicated
Terminal Holes
Terminal Holes
105
A165K
A165K
Lighted Models with PCB Terminals
Lighted SPDT Switches
Lighted DPDT Switches
Terminal Arrangement
(Bottom View)
Side with TOP
indicated
Terminal Arrangement
Model, rating, and lot
number indication
(Bottom View)
Dimensions of
PCB Terminals
Side with TOP
indicated
Dimensions of
PCB Terminals
PCB Cutouts
(Bottom View)
PCB Cutouts
(Bottom View)
Lamp terminal (t=0.5)
Lamp terminal (t=0.5)
Side with TOP indicated
Side with TOP indicated
Eight, 1 dia.
Eight, 1 dia.
Two, 5 dia.
Two, 5 dia.
Note: For details of the terminal arrangement for Screw-Less Clamps, refer to page 65.
Non-lighted Models with PCB Terminals
Lamp terminals are not provided with the Non-lighted Knob-type Selector Switches and Key-type Selector Switches.
Non-lighted SPDT Switches
Non-lighted DPDT Switches
Terminal Arrangement
(Bottom View)
Model, rating, and lot
number indication
Dimensions of
P
Side wth TOP indicated
Side with TOP indicated
Dimensions of
PCB Terminals
PCB Cutouts
(Bottom View)
PCB Cutouts
(Bottom View)
Side with TOP indicated
Side with TOP indicated
a.
Three, 1 dia.
Two, 5 dia.
106
A165K
A165K
Installation
For details on mounting the Switch to a panel, and mounting and dismounting the Switch, refer to installation details for the A16 Pushbutton
Switch.
Flange Rotation
A165 Key-type Selector Switch
Fix the Switch screw and rotate the flange in 45° turns.
Flange
Lock ring
Switch scr
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. A126-E1-1
107
相关型号：
©2020 ICPDF网 联系我们和版权申明