D2MV-1-1C2 [OMRON]
Snap Acting/Limit Switch, SPDT, Momentary, 1A, 30VDC, 2.5mm, Solder Terminal, Pin Plunger Actuator, Panel Mount, ROHS COMPLIANT;
| 型号： | D2MV-1-1C2 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Snap Acting/Limit Switch, SPDT, Momentary, 1A, 30VDC, 2.5mm, Solder Terminal, Pin Plunger Actuator, Panel Mount, ROHS COMPLIANT 开关 光电二极管 |
| 文件： | 总5页 (文件大小：1211K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
D2MV
Miniature Basic Switch
Highly reliable Miniature
Basic Switch in spite of its
Ultra-low Load action
● Twin crossbar contact employed for exceptionally
high contact reliability.
D
2
M
V
● Unique internal mechanism that ensures high
contact reliability even in micro load operations.
Applicable for detection of light objects.
RoHSCompliant
Model Number Legend
1
2
3
4
5
D2MV-
-
@ @ @ @ @
1. Ratings
1: 125 VAC 1A
3. Contact form
1: SPDT
01: 30 VDC 0.1A
4. Terminals
2. Actuator
C: Solder terminals
None: Pin plunger
L11 : Short hinge lever
5. Maximum Operating Force (OF)
1: 0.10 N {10 gf} (for pin plunger models only)
2: 0.25 N {25 gf} (for pin plunger models only)
3: 0.49 N {50 gf}
L
: Hinge lever
L111 : Long Hinge Lever
L13 : Simulated roller lever
L22 : Short hinge roller Lever
L2 : Hinge roller Lever
Note. These values are for the pin plunger models.
List of Models
Ratings
1A
0.1A
Actuator
Max. Operating Force (OF)
0.10 N {10 gf}
D2MV-1-1C1
D2MV-1-1C2
D2MV-1-1C3
D2MV-01-1C1
D2MV-01-1C2
D2MV-01-1C3
Pin plunger
0.25 N {25 gf}
0.49 N {50 gf}
Short hinge
lever
0.49 N {50 gf}
0.29 N {30 gf}
D2MV-1L11-1C3
D2MV-1L-1C3
D2MV-01L11-1C3
D2MV-01L-1C3
Hinge lever
Long hinge
lever
0.15 N {15 gf}
0.29 N {30 gf}
D2MV-1L111-1C3
D2MV-1L13-1C3
D2MV-01L111-1C3
D2MV-01L13-1C3
Simulated roller
lever
Short hinge
roller lever
0.49 N {50 gf}
0.29 N {30 gf}
D2MV-1L22-1C3
D2MV-1L2-1C3
D2MV-01L22-1C3
D2MV-01L2-1C3
Hinge roller
lever
Contact Form
●SPDT
NC
NO
COM
Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately)
Refer to "Basic Switch Common Accessories"
1
D2MV
Miniature Basic Switch
Contact Specifications
Item
Model
D2MV-1 models
Needle
D2MV-01 models
Twin crossbar
Gold alloy
Specification
Contact Material
Silver
Gap (standard value)
0.5 mm
NC
NO
Inrush
current
−
Minimum applicable load
(reference value) *
5 VDC 30mA
5 VDC 1mA
D
2
M
V
*
Please refer to "●Using Micro Loads" in "Precautions" for more
information on the minimum applicable load.
Ratings
Characteristics
Model
D2MV-1
models
D2MV-01
models
Item
Model
D2MV-1 models
D2MV-01 models
1 mm to 1 m/s (for pin plunger models)
300 operations/min (for pin plunger models)
Permissible operating speed
Rated
Permissible
Mechanical
Item
Resistive load
voltage
operating
Electrical
60 operations/min
125 VAC
30 VDC
1A
1A
0.1A
0.1A
frequency
Insulation resistance
100MΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial value)
30 mΩ max.
50 mΩ max.
Note. The above rating values apply under the
following test conditions.
Between terminals of the same
polarity
1,000 VAC 50/60 Hz 1min
(1) Ambient temperature: 20 2°C
(2) Ambient humidity: 65 5%
(3) Operating frequency: 30 operations/min
Dielectric
strength * 1
Between current-carrying metal
parts and ground
1,500 VAC 50/60 Hz 1min
1,500 VAC 50/60 Hz 1min
Between each terminal and
non-current-carrying metal parts
Approved Safety Standard
UL (UL1054) /CSA (CSA C22.2 No.55)
Vibration
resistance * 2
Malfunction
10 to 55 Hz, 1.5 mm double amplitude
150 m/s2 {approx. 15G} max.
Rated
Model
D2MV-1
D2MV-01
Models with OF of 0.10N
voltage
125 VAC
30 VDC
Durability
Shock
resistance
Models with OF
1A
1A
0.1A
0.1A
400 m/s2 {approx. 40G} max.
between 0.25 to 0.49N
Malfunction * 2
Mechanical
100 m/s2 {approx. 10G} max.
10,000,000 operations min. (60 operations/min)
500,000 operations min. 1,000,000 operations min.
Durability * 3
Electrical
(30 operations/min)
(30 operations/min)
Degree of protection
IEC IP40
−25°C to +80°C (at ambient humidity of 60% max.)
Ambient operating temperature
(with no icing or condensation)
Ambient operating humidity
Weight
85% max. (for +5°C to +35°C)
Approx. 6g (pin plunger models)
Note. The data given above are initial values.
*1. The values for dielectric strength shown are for models with a Separator (refer to "Micro Switch
Common Accessories").
*2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel
Position value for lever. Close or open circuit of the contact is 1ms max.
Terminals/Appearances (Unit:mm)
Mounting Holes (Unit: mm)
2-3.1 dia. mounting holes
or M3 screw hole
(6.5)
(6.3)
3.9
0.1
10.3
7.5
0.1
22.2
6.3
3.2
1.2
0.1
4.75
2.4 dia. 1.3 dia.
2
D2MV
Miniature Basic Switch
Dimensions (Unit: mm) /Operating Characteristics
0.25
20.2
4.2
●Pin plunger Models
D2MV-1-1C@
D2MV-01-1C@
+0.07
3
dia. holes
PT
−0.05
2.8
2.8
A
2.8
OP
0.1
15.9
10.3
11.6
0.8
19.8
+0.07
−0.05
3
+0.15
−0.07
3.2
dia.
0.1
22.2
10.3
4
t=0.5
3-Solder/Terminal
(7.5)
2.8
31.8
0.8
39.3
Model D2MV-1-1C1
D2MV-01-1C1
D2MV-1-1C2
D2MV-01-1C2
D2MV-1-1C3
D2MV-01-1C3
Operating
characteristics
D
2
M
V
Operating Force
Releasing Force
OF Max.
RF Min.
0.10N {10 gf}
0.005N {0.5 gf}
0.25N {25 gf}
0.01N {1 gf}
0.49N {50 gf}
0.02N {2 gf}
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
1.2 mm
1.3 mm
0.25 mm
Note. The @ in the model number is for the OF code.
Operating Position OP
14.7 0.4 mm
●Short Hinge Lever Models
t=0.5 *
8.1
Model D2MV-1L11-1C3
D2MV-01L11-1C3
22.1
D2MV-1L11-1C3
D2MV-01L11-1C3
Operating
characteristics
+0.07
4.3
3
dia. holes
A
PT
−0.05
2.8
Operating Force
Releasing Force
OF Max.
RF Min.
0.49N {50 gf}
0.04N {4 gf} (reference value)
2.8
OP
0.1
10.3
15.9
11.6
Pretravel
Overtravel
PT Max.
OT Min.
Movement Differential MD Max.
1.7 mm
1.0 mm
0.4 mm
0.8
19.8
+0.07
−0.05
3
+0.15
−0.07
3.2
dia.
0.1
22.2
10.3
4
Operating Position OP
15.2 0.5 mm
t=0.5
3-Solder/Terminal
(7.5)
2.8
31.8
39.3
Note. The indicated reference values of RF are for
cases where the lever weight is not applied to
the plunger.
0.8
* Stainless-steel lever
35.6
●Hinge Lever Models
D2MV-1L-1C3
0.8
A
+0.07
−0.05
PT
4.3
3
dia. holes
t=0.5 *
Model D2MV-1L-1C3
Operating
8.1
2.8
D2MV-01L-1C3
D2MV-01L-1C3
characteristics
2.8
Operating Force
Releasing Force
OF Max.
RF Min.
0.29N {30 gf}
0.02N {2 gf} (reference value)
OP
0.1
10.3
15.9
11.6
0.8
19.8
+0.07
−0.05
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
3.3 mm
2.1 mm
0.7 mm
3
+0.15
3.2
dia.
−0.07
0.1
22.2
10.3
4
t=0.5
3-Solder/Terminal
(7.5)
2.8
31.8
Operating Position OP
15.2 1.2 mm
0.8
39.3
Note. The indicated reference values of RF are for
cases where the lever weight is not applied to
the plunger.
* Stainless-steel lever
●Long Hinge Lever Models
D2MV-1L111-1C3
D2MV-01L111-1C3
0.8
59.4
A
Model D2MV-1L111-1C3
Operating
characteristics
+0.07
−0.05
PT
4.3
3
dia. holes
t=0.5 *
8.1
2.8
D2MV-01L111-1C3
2.8
Operating Force
Releasing Force
OF Max.
RF Min.
0.15N {15 gf}
0.01N {1 gf} (reference value)
OP
0.1
10.3
15.9
11.6
0.8
19.8
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
6.0 mm
4.0 mm
1.4 mm
+0.07
−0.05
3
+0.15
−0.07
3.2
dia.
0.1
22.2
10.3
4
t=0.5
(7.5)
2.8
Operating Position OP
15.2 2.6 mm
31.8
3-Solder/Terminal
0.8
39.3
Note. The indicated reference values of RF are for
cases where the lever weight is not applied to
the plunger.
* Stainless-steel lever
●Simulated Roller Lever Models
R3.5
32.6
t=0.5 *
Model D2MV-1L13-1C3
Operating
characteristics
D2MV-1L13-1C3
A
PT
0.8
4.3
+0.07
3
D2MV-01L13-1C3
2.8
dia. holes
−0.05
D2MV-01L13-1C3
8.1
Operating Force
Releasing Force
OF Max.
RF Min.
0.29N {30 gf}
0.02N {2 gf} (reference value)
2.8
OP
0.1
10.3
15.9
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
3.3 mm
1.9 mm
0.7 mm
11.6
0.8
19.8
+0.07
−0.05
3
+0.15
3.2
dia.
−0.07
0.1
Operating Position OP
18.7 1.2 mm
22.2
10.3
4
t=0.5
(7.5)
2.8
31.8
3-Solder/Terminal
Note. The indicated reference values of RF are for
cases where the lever weight is not applied to
the plunger.
0.8
39.3
* Stainless-steel lever
Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
3
D2MV
Miniature Basic Switch
●Short Hinge Roller Lever Models
4.8 dia.×4.8 *2
t=0.5 *1
20.1
D2MV-1L22-1C3
A
PT
5.1
Model D2MV-1L22-1C3
D2MV-01L22-1C3
Operating
characteristics
D2MV-01L22-1C3
8.1
+0.07
−0.05
3
dia. holes
11.6
Operating Force
Releasing Force
OF Max.
RF Min.
0.49N {50 gf}
0.04N {4 gf} (reference value)
2.8
OP
0.1
10.3
15.9
19.8
0.8
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
1.7 mm
1.0 mm
0.4 mm
+0.07
−0.05
3
+0.15
−0.07
3.2
dia.
0.1
22.2
10.3
4
t=0.5
Operating Position OP
20.7 0.6 mm
(7.5)
2.8
31.8
3-Solder/Terminal
Note. The indicated reference values of RF are for
cases where the lever weight is not applied to
the plunger.
D
2
M
V
0.8
39.3
* 1. Stainless-steel lever
* 2. Polyacetal resin roller
●Hinge Roller Lever Models
D2MV-1L2-1C3
D2MV-01L2-1C3
4.8 dia.×4.8 *2
A
PT
Model D2MV-1L2-1C3
Operating
characteristics
0.8
5.1
34.8
D2MV-01L2-1C3
t=0.5 *1
8.1
+0.07
−0.05
3
dia. holes
Operating Force
Releasing Force
OF Max.
RF Min.
0.29N {30 gf}
0.02N {2 gf} (reference value)
2.8
OP
0.1
10.3
15.9
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
3.3 mm
2.1 mm
0.7 mm
11.6
0.8
19.8
+0.07
3
−0.05
+0.15
−0.07
3.2
dia.
0.1
22.2
10.3
4
Operating Position OP
20.7 1.2 mm
t=0.5
(7.5)
2.8
31.8
3-Solder/Terminal
Note. The indicated reference values of RF are for
cases where the lever weight is not applied to
the plunger.
0.8
39.3
* 1. Stainless-steel lever
* 2. Polyacetal resin roller
Note 1. Unless otherwise specified, a tolerance of 0.4mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
Precautions
★Please refer to "Basic Switches Common Precautions" for correct use.
Cautions
●Handling
●Using Micro Loads
Do not apply excessive shock. Doing so may cause damage to
the Switch's internal components because they designed for a
small load.
Using a model for ordinary loads to open or close the contact of
a micro load circuit may result in faulty contact. Use models that
operate in the following range. However, even when using micro
load models within the following operating range, if inrush current
occurs when the contact is opened or closed, it may increase the
contact wear and so decrease durability. Therefore, insert a
contact protection circuit where necessary. The minimum
applicable load is the N-level reference value. This value
indicates the malfunction reference level for the reliability level of
60% (λ60).
●Soldering
• Terminal connections
Complete the soldering at the iron tip temperature between
250 to 350°C (60W) within 5 seconds, and do not apply any
external force for 1 minute after soldering.
Apply minimum amount of flux required. It may result in
contact failure once the flux penetrates into the internal part of
the Switch.
(JIS C5003)
The equation, λ60=0.5×10-6/ operations indicates that the
1
estimated malfunction rate is less than
with a reliability level of 60%.
operations
2,000,000
Correct Use
●Mounting
0.16 mA
5 mA
100 mA
30
Use M3 mounting screw with plane washers or spring washers to
securely mount the Switch. Tighten the screws to a torque of
0.39 to 0.59 N·m {4 to 6 kgf·cm}.
24
Normal
load type
Operating
range
Micro load type
Operating range
D2MV-01
●Mounting Direction
D2MV-1
For a Switch with an actuator, mount the Switch in a direction
where the actuator weight will not be applied to the Switch. Since
the Switch is designed for a low operating force, its release force
is low. Therefore, release failure may occur if unnecessary force
is applied to the Switch.
12
5
0
1 mA
30 mA
0.1
1
10
100
1,000
Current (mA)
4
D2MV
Miniature Basic Switch
D
2
M
V
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Contact: www.omron.com/ecb
Cat. No. B018-E1-09
0812(0207)(O)
5
相关型号：
D2MV-1-1C3
Snap Acting/Limit Switch, SPDT, Momentary, 1A, 30VDC, 2.5mm, Solder Terminal, Pin Plunger Actuator, Panel Mount, ROHS COMPLIANT
OMRON
©2020 ICPDF网 联系我们和版权申明